iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Grazvydas Ignotas 79ccf549b3 omap3: pandora: add NAND and wifi support 
Add platform data for NAND and wifi, also setup all GPIOs
needed to use the wifi chip.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02 13:18:01 +03:00
..
include/mach
omap4: Move SOC specific code from board file
2010-05-20 11:17:51 -07:00
board-2430sdp.c
omap: mux: Mux 2430 USB0HS_STP in board-2430.c
2010-07-05 16:31:39 +03:00
board-3430sdp.c
arm: omap: switch over to gpio_set_debounce
2010-05-27 09:12:42 -07:00
board-3630sdp.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
board-4430sdp.c
omap4: Adding hsmmc support to board file
2010-05-20 11:21:21 -07:00
board-am3517evm.c
AM3517: rename the i2c boardinfo to make it more readable
2010-05-20 11:18:29 -07:00
board-apollon.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
board-cm-t35.c
omap3: Fix compile for board-cm-t35
2010-05-04 13:19:16 -07:00
board-devkit8000.c
OMAP2: Devkit8000: Fix regulator for power supply
2010-07-05 17:04:42 +03:00
board-generic.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
board-h4.c
Removing dead MACH_OMAP2_H4_USB1
2010-07-05 17:03:59 +03:00
board-igep0020.c
omap3: Fix EHCI port for IGEP v2 board
2010-04-23 15:35:11 -07:00
board-ldp.c
arm: omap: switch over to gpio_set_debounce
2010-05-27 09:12:42 -07:00
board-n8x0.c
omap: mux: Select POP package for N8X0
2010-07-05 16:31:38 +03:00
board-omap3beagle.c
board-omap3-beagle: add DSS2 support
2010-05-18 15:06:07 +03:00
board-omap3evm.c
arm: omap: switch over to gpio_set_debounce
2010-05-27 09:12:42 -07:00
board-omap3pandora.c
omap3: pandora: add NAND and wifi support
2010-08-02 13:18:01 +03:00
board-omap3stalker.c
omap: Stalker board: switch over to gpio_set_debounce
2010-06-09 13:53:05 +03:00
board-omap3touchbook.c
arm: omap: switch over to gpio_set_debounce
2010-05-27 09:12:42 -07:00
board-overo.c
omap: Overo: Add support for second ethernet port
2010-05-20 10:53:55 -07:00
board-rx51-peripherals.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
board-rx51-sdram.c
omap3: rx51: Add SDRAM init
2009-11-22 10:24:33 -08:00
board-rx51-video.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
board-rx51.c
OMAP: RX51: Add LCD Panel support
2010-05-18 15:06:02 +03:00
board-sdp-flash.c
omap: board-sdp-flash.c: Fix typos in debug output
2010-04-23 15:37:24 -07:00
board-zoom2.c
omap: zoom2: wlan board muxing
2010-08-02 13:18:00 +03:00
board-zoom3.c
omap: zoom3: wlan board muxing
2010-08-02 13:18:00 +03:00
board-zoom-debugboard.c
omap2/3: Fix DEBUG_LL for omap zoom2/3
2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c
omap3: zoom2/3 / 3630sdp: Don't init always all uarts
2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c
OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c
OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c
2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c
OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c
2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c
OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c
2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clkt_clksel.c
OMAP2+ clock: clean up clkt_clksel.c
2010-05-20 12:31:06 -06:00
clkt_dpll.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3xxx_data.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
2010-05-21 14:46:51 -07:00
clock3xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP4: clock: Fix multi-omap boot with reset un-used clocks
2010-06-16 19:01:33 +03:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
2010-05-21 14:46:51 -07:00
clock2430_data.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
2010-05-21 14:46:51 -07:00
clock2430.c
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3517.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality
2010-05-20 12:31:07 -06:00
clock.c
OMAP2+ clock: clean up clkt_clksel.c
2010-05-20 12:31:06 -06:00
clock.h
OMAP2+ clock: clean up clkt_clksel.c
2010-05-20 12:31:06 -06:00
clockdomain.c
OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:04 -06:00
clockdomains44xx.h
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
2010-05-20 12:31:11 -06:00
clockdomains.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
cm4xxx.c
OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function
2010-05-20 12:31:08 -06:00
cm44xx.h
OMAP4: PRCM: Add offset defines for all CM registers
2010-05-20 12:31:12 -06:00
cm-regbits-24xx.h
OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h
OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
cm.c
OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h
2010-05-20 12:31:08 -06:00
cm.h
OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function
2010-05-20 12:31:08 -06:00
control.c
OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:05 -06:00
cpuidle34xx.c
OMAP3: cpuidle: Add valid field into C-state parameter passing
2010-02-23 11:05:02 -08:00
devices.c
Removing dead OMAP_STI
2010-07-05 17:03:58 +03:00
dpll3xxx.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpmc-nand.c
omap: fix a gpmc nand problem
2010-04-23 15:35:11 -07:00
gpmc-onenand.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
gpmc-smc91x.c
omap: use smc91x_platdata to setup smc91x
2009-12-11 16:16:33 -08:00
gpmc.c
omap2/3/4: gpmc: kill compile warning
2010-02-15 10:03:33 -08:00
hsmmc.c
omap4: Adding PBIAS Configuration for MMC1 Controller
2010-05-20 11:21:22 -07:00
hsmmc.h
omap_hsmmc: Allow for a shared VccQ
2010-02-15 10:03:34 -08:00
i2c.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
id.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
io.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
iommu2.c
omap iommu: move iommu_disable at fault to the above layer
2010-06-29 07:55:07 +03:00
irq.c
OMAP2/3: IRQ: ensure valid base address
2010-02-03 08:48:06 -08:00
Kconfig
omap2/3/4: Add Kconfig option to compile in typical omap features
2010-07-05 16:31:48 +03:00
mailbox.c
omap2/3/4: mailbox: remove compiler warning
2010-03-11 14:50:00 -08:00
Makefile
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
Makefile.boot
[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx
2005-11-10 14:26:51 +00:00
mcbsp.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
mux34xx.c
omap: mux: Remove unncessary parens from mux34xx.c
2010-07-05 16:31:36 +03:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux2420.c
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2420.h
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2430.c
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
mux2430.h
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
mux.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
mux.h
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
omap4-common.c
omap4: Move SOC specific code from board file
2010-05-20 11:17:51 -07:00
omap44xx-smc.S
omap4: Fix build break when used with gcc-4.4.1 (2009-q3)
2010-04-23 15:35:11 -07:00
omap_hwmod_3xxx_data.c
OMAP: hwmod: Rename hwmod name for the MPU
2010-05-20 12:31:10 -06:00
omap_hwmod_2420_data.c
OMAP: hwmod: Rename hwmod name for the MPU
2010-05-20 12:31:10 -06:00
omap_hwmod_2430_data.c
OMAP: hwmod: Rename hwmod name for the MPU
2010-05-20 12:31:10 -06:00
omap_hwmod_common_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod.c
OMAP: hwmod: Fix the missing braces
2010-06-23 18:15:12 -06:00
omap-headsmp.S
omap4: Fix build break when used with gcc-4.4.1 (2009-q3)
2010-04-23 15:35:11 -07:00
omap-iommu.c
omap iommu: update ducati mmu irq define name
2010-06-29 07:55:08 +03:00
omap-smp.c
omap4: Move SOC specific code from board file
2010-05-20 11:17:51 -07:00
opp2xxx.h
omap2/3: Multiboot compile fixes to compile in omap2 and omap3
2010-02-15 09:26:55 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
pm24xx.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
pm34xx.c
OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg
2010-06-10 15:37:41 +03:00
pm-debug.c
OMAP3: PM: Add milliseconds interface to suspend wakeup timer
2010-05-12 09:39:00 -07:00
pm.h
OMAP3: PM: Add milliseconds interface to suspend wakeup timer
2010-05-12 09:39:00 -07:00
powerdomain.c
OMAP powerdomain, hwmod, omap_device: add some credits
2010-05-20 12:31:14 -06:00
powerdomains24xx.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
powerdomains34xx.h
OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure
2010-02-24 12:05:50 -07:00
powerdomains44xx.h
OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
2010-05-20 12:31:13 -06:00
powerdomains.h
OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs
2010-01-29 10:14:23 -07:00
prcm-common.h
OMAP4: PRCM: Remove duplicate definition of base addresses
2010-05-20 12:31:12 -06:00
prcm.c
OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:05 -06:00
prm44xx.h
OMAP4: PRCM: Add offset defines for all PRM registers
2010-05-20 12:31:12 -06:00
prm-regbits-24xx.h
OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h
OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
prm.h
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
2010-05-20 12:31:11 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc.c
omap2/3/4: ioremap omap_globals module
2010-02-23 10:57:40 -08:00
sdrc.h
OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
2009-12-11 16:16:00 -07:00
serial.c
omap2/3/4: serial: Remove condition for getting uart4_phys
2010-03-15 16:34:16 -05:00
sleep24xx.S
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sleep34xx.S
OMAP3: PM: Added support for L2 aux ctrl register save and restore
2010-02-23 11:05:07 -08:00
sram34xx.S
OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
2009-12-11 17:00:42 -07:00
sram242x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
sram243x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
timer-gp.c
OMAP4: clock: Remove clock hacks from timer-gp.c
2010-02-24 17:45:17 -07:00
timer-mpu.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-ehci.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
usb-fs.c
omap: mux: Make omap2 FS USB code use new mux functions
2010-07-05 16:31:38 +03:00
usb-musb.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
usb-tusb6010.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00