5b63fb90ad
Commit 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and
am43xx") dropped legacy mmc platform data for am3 and am4, but missed the
fact that we never updated the dts files for mmc3 that is directly on l3
interconnect instead of l4 interconnect. This leads to a situation with
no legacy platform data and incomplete dts data.
Let's update the mmc instances on l3 interconnect to probe properly with
ti-sysc interconnect target module driver to make mmc3 work again. Let's
still keep legacy "ti,hwmods" property around for v5.2 kernel and only
drop it later on.
Note that there is no need to use property status = "disabled" for mmc3.
The default for dts is enabled, and runtime PM will idle unused instances
just fine.
Fixes: 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx")
Reported-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
376 lines
8.5 KiB
Plaintext
376 lines
8.5 KiB
Plaintext
/*
|
|
* Device Tree Source for AM4372 SoC
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/bus/ti-sysc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/am4.h>
|
|
|
|
/ {
|
|
compatible = "ti,am4372", "ti,am43";
|
|
interrupt-parent = <&wakeupgen>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen { };
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
ethernet0 = &cpsw_emac0;
|
|
ethernet1 = &cpsw_emac1;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu: cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
|
|
clocks = <&dpll_mpu_ck>;
|
|
clock-names = "cpu";
|
|
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: opp-table {
|
|
compatible = "operating-points-v2-ti-cpu";
|
|
syscon = <&scm_conf>;
|
|
|
|
opp50-300000000 {
|
|
opp-hz = /bits/ 64 <300000000>;
|
|
opp-microvolt = <950000 931000 969000>;
|
|
opp-supported-hw = <0xFF 0x01>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp100-600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
opp-microvolt = <1100000 1078000 1122000>;
|
|
opp-supported-hw = <0xFF 0x04>;
|
|
};
|
|
|
|
opp120-720000000 {
|
|
opp-hz = /bits/ 64 <720000000>;
|
|
opp-microvolt = <1200000 1176000 1224000>;
|
|
opp-supported-hw = <0xFF 0x08>;
|
|
};
|
|
|
|
oppturbo-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <1260000 1234800 1285200>;
|
|
opp-supported-hw = <0xFF 0x10>;
|
|
};
|
|
|
|
oppnitro-1000000000 {
|
|
opp-hz = /bits/ 64 <1000000000>;
|
|
opp-microvolt = <1325000 1298500 1351500>;
|
|
opp-supported-hw = <0xFF 0x20>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap4-mpu";
|
|
ti,hwmods = "mpu";
|
|
pm-sram = <&pm_sram_code
|
|
&pm_sram_data>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@48241000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48241000 0x1000>,
|
|
<0x48240100 0x0100>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
wakeupgen: interrupt-controller@48281000 {
|
|
compatible = "ti,omap4-wugen-mpu";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48281000 0x1000>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
scu: scu@48240000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x48240000 0x100>;
|
|
};
|
|
|
|
global_timer: timer@48240200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x48240200 0x100>;
|
|
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-parent = <&gic>;
|
|
clocks = <&mpu_periphclk>;
|
|
};
|
|
|
|
local_timer: timer@48240600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0x48240600 0x100>;
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-parent = <&gic>;
|
|
clocks = <&mpu_periphclk>;
|
|
};
|
|
|
|
l2-cache-controller@48242000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x48242000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
ocp@44000000 {
|
|
compatible = "ti,am4372-l3-noc", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
ti,no-idle;
|
|
reg = <0x44000000 0x400000
|
|
0x44800000 0x400000>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
l4_wkup: interconnect@44c00000 {
|
|
wkup_m3: wkup_m3@100000 {
|
|
compatible = "ti,am4372-wkup-m3";
|
|
reg = <0x100000 0x4000>,
|
|
<0x180000 0x2000>;
|
|
reg-names = "umem", "dmem";
|
|
ti,hwmods = "wkup_m3";
|
|
ti,pm-firmware = "am335x-pm-firmware.elf";
|
|
};
|
|
};
|
|
l4_per: interconnect@48000000 {
|
|
};
|
|
l4_fast: interconnect@4a000000 {
|
|
};
|
|
|
|
emif: emif@4c000000 {
|
|
compatible = "ti,emif-am4372";
|
|
reg = <0x4c000000 0x1000000>;
|
|
ti,hwmods = "emif";
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,no-idle;
|
|
sram = <&pm_sram_code
|
|
&pm_sram_data>;
|
|
};
|
|
|
|
edma: edma@49000000 {
|
|
compatible = "ti,edma3-tpcc";
|
|
ti,hwmods = "tpcc";
|
|
reg = <0x49000000 0x10000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_ccint", "edma3_mperr",
|
|
"edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
|
|
<&edma_tptc2 0>;
|
|
|
|
ti,edma-memcpy-channels = <58 59>;
|
|
};
|
|
|
|
edma_tptc0: tptc@49800000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc0";
|
|
reg = <0x49800000 0x100000>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
edma_tptc1: tptc@49900000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc1";
|
|
reg = <0x49900000 0x100000>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
edma_tptc2: tptc@49a00000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc2";
|
|
reg = <0x49a00000 0x100000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
target-module@47810000 {
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "mmc3";
|
|
reg = <0x478102fc 0x4>,
|
|
<0x47810110 0x4>,
|
|
<0x47810114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x47810000 0x1000>;
|
|
|
|
mmc3: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
ti,needs-special-reset;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
};
|
|
|
|
sham: sham@53100000 {
|
|
compatible = "ti,omap5-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x53100000 0x300>;
|
|
dmas = <&edma 36 0>;
|
|
dma-names = "rx";
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
aes: aes@53501000 {
|
|
compatible = "ti,omap4-aes";
|
|
ti,hwmods = "aes";
|
|
reg = <0x53501000 0xa0>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&edma 6 0>,
|
|
<&edma 5 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
des: des@53701000 {
|
|
compatible = "ti,omap4-des";
|
|
ti,hwmods = "des";
|
|
reg = <0x53701000 0xa0>;
|
|
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&edma 34 0>,
|
|
<&edma 33 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
dmas = <&edma 52 0>;
|
|
dma-names = "rxtx";
|
|
clocks = <&l3s_gclk>;
|
|
clock-names = "fck";
|
|
reg = <0x50000000 0x2000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpmc,num-cs = <7>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: spi@47900000 {
|
|
compatible = "ti,am4372-qspi";
|
|
reg = <0x47900000 0x100>,
|
|
<0x30000000 0x4000000>;
|
|
reg-names = "qspi_base", "qspi_mmap";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "qspi";
|
|
interrupts = <0 138 0x4>;
|
|
num-cs = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dss: dss@4832a000 {
|
|
compatible = "ti,omap3-dss";
|
|
reg = <0x4832a000 0x200>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_core";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dispc: dispc@4832a400 {
|
|
compatible = "ti,omap3-dispc";
|
|
reg = <0x4832a400 0x400>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "dss_dispc";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
};
|
|
|
|
rfbi: rfbi@4832a800 {
|
|
compatible = "ti,omap3-rfbi";
|
|
reg = <0x4832a800 0x100>;
|
|
ti,hwmods = "dss_rfbi";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
ocmcram: ocmcram@40300000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x40300000 0x40000>; /* 256k */
|
|
ranges = <0x0 0x40300000 0x40000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
pm_sram_code: pm-sram-code@0 {
|
|
compatible = "ti,sram";
|
|
reg = <0x0 0x1000>;
|
|
protect-exec;
|
|
};
|
|
|
|
pm_sram_data: pm-sram-data@1000 {
|
|
compatible = "ti,sram";
|
|
reg = <0x1000 0x1000>;
|
|
pool;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "am437x-l4.dtsi"
|
|
#include "am43xx-clocks.dtsi"
|