7c7289a404
Most of the devices in the supported list have PXA configuration of FIFO. In particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined for CE4100. Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix definitions by CE4100 and append necessary pieces of code to switch case conditions. We are on safe side since those bits are ignored on all LPSS IPs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
1861 lines
47 KiB
C
1861 lines
47 KiB
C
/*
|
|
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
|
|
* Copyright (C) 2013, Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/pxa2xx_spi.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include "spi-pxa2xx.h"
|
|
|
|
MODULE_AUTHOR("Stephen Street");
|
|
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa2xx-spi");
|
|
|
|
#define TIMOUT_DFLT 1000
|
|
|
|
/*
|
|
* for testing SSCR1 changes that require SSP restart, basically
|
|
* everything except the service and interrupt enables, the pxa270 developer
|
|
* manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
|
|
* list, but the PXA255 dev man says all bits without really meaning the
|
|
* service and interrupt enables
|
|
*/
|
|
#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
|
|
| SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
|
|
| SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
|
|
| SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
|
|
| SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
|
|
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
|
|
|
|
#define QUARK_X1000_SSCR1_CHANGE_MASK (QUARK_X1000_SSCR1_STRF \
|
|
| QUARK_X1000_SSCR1_EFWR \
|
|
| QUARK_X1000_SSCR1_RFT \
|
|
| QUARK_X1000_SSCR1_TFT \
|
|
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
|
|
|
|
#define CE4100_SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
|
|
| SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
|
|
| SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
|
|
| SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
|
|
| CE4100_SSCR1_RFT | CE4100_SSCR1_TFT | SSCR1_MWDS \
|
|
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
|
|
|
|
#define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
|
|
#define LPSS_CS_CONTROL_SW_MODE BIT(0)
|
|
#define LPSS_CS_CONTROL_CS_HIGH BIT(1)
|
|
#define LPSS_CAPS_CS_EN_SHIFT 9
|
|
#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT)
|
|
|
|
struct lpss_config {
|
|
/* LPSS offset from drv_data->ioaddr */
|
|
unsigned offset;
|
|
/* Register offsets from drv_data->lpss_base or -1 */
|
|
int reg_general;
|
|
int reg_ssp;
|
|
int reg_cs_ctrl;
|
|
int reg_capabilities;
|
|
/* FIFO thresholds */
|
|
u32 rx_threshold;
|
|
u32 tx_threshold_lo;
|
|
u32 tx_threshold_hi;
|
|
/* Chip select control */
|
|
unsigned cs_sel_shift;
|
|
unsigned cs_sel_mask;
|
|
unsigned cs_num;
|
|
};
|
|
|
|
/* Keep these sorted with enum pxa_ssp_type */
|
|
static const struct lpss_config lpss_platforms[] = {
|
|
{ /* LPSS_LPT_SSP */
|
|
.offset = 0x800,
|
|
.reg_general = 0x08,
|
|
.reg_ssp = 0x0c,
|
|
.reg_cs_ctrl = 0x18,
|
|
.reg_capabilities = -1,
|
|
.rx_threshold = 64,
|
|
.tx_threshold_lo = 160,
|
|
.tx_threshold_hi = 224,
|
|
},
|
|
{ /* LPSS_BYT_SSP */
|
|
.offset = 0x400,
|
|
.reg_general = 0x08,
|
|
.reg_ssp = 0x0c,
|
|
.reg_cs_ctrl = 0x18,
|
|
.reg_capabilities = -1,
|
|
.rx_threshold = 64,
|
|
.tx_threshold_lo = 160,
|
|
.tx_threshold_hi = 224,
|
|
},
|
|
{ /* LPSS_BSW_SSP */
|
|
.offset = 0x400,
|
|
.reg_general = 0x08,
|
|
.reg_ssp = 0x0c,
|
|
.reg_cs_ctrl = 0x18,
|
|
.reg_capabilities = -1,
|
|
.rx_threshold = 64,
|
|
.tx_threshold_lo = 160,
|
|
.tx_threshold_hi = 224,
|
|
.cs_sel_shift = 2,
|
|
.cs_sel_mask = 1 << 2,
|
|
.cs_num = 2,
|
|
},
|
|
{ /* LPSS_SPT_SSP */
|
|
.offset = 0x200,
|
|
.reg_general = -1,
|
|
.reg_ssp = 0x20,
|
|
.reg_cs_ctrl = 0x24,
|
|
.reg_capabilities = -1,
|
|
.rx_threshold = 1,
|
|
.tx_threshold_lo = 32,
|
|
.tx_threshold_hi = 56,
|
|
},
|
|
{ /* LPSS_BXT_SSP */
|
|
.offset = 0x200,
|
|
.reg_general = -1,
|
|
.reg_ssp = 0x20,
|
|
.reg_cs_ctrl = 0x24,
|
|
.reg_capabilities = 0xfc,
|
|
.rx_threshold = 1,
|
|
.tx_threshold_lo = 16,
|
|
.tx_threshold_hi = 48,
|
|
.cs_sel_shift = 8,
|
|
.cs_sel_mask = 3 << 8,
|
|
},
|
|
};
|
|
|
|
static inline const struct lpss_config
|
|
*lpss_get_config(const struct driver_data *drv_data)
|
|
{
|
|
return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
|
|
}
|
|
|
|
static bool is_lpss_ssp(const struct driver_data *drv_data)
|
|
{
|
|
switch (drv_data->ssp_type) {
|
|
case LPSS_LPT_SSP:
|
|
case LPSS_BYT_SSP:
|
|
case LPSS_BSW_SSP:
|
|
case LPSS_SPT_SSP:
|
|
case LPSS_BXT_SSP:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
|
|
{
|
|
return drv_data->ssp_type == QUARK_X1000_SSP;
|
|
}
|
|
|
|
static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data)
|
|
{
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
return QUARK_X1000_SSCR1_CHANGE_MASK;
|
|
case CE4100_SSP:
|
|
return CE4100_SSCR1_CHANGE_MASK;
|
|
default:
|
|
return SSCR1_CHANGE_MASK;
|
|
}
|
|
}
|
|
|
|
static u32
|
|
pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data)
|
|
{
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
return RX_THRESH_QUARK_X1000_DFLT;
|
|
case CE4100_SSP:
|
|
return RX_THRESH_CE4100_DFLT;
|
|
default:
|
|
return RX_THRESH_DFLT;
|
|
}
|
|
}
|
|
|
|
static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data)
|
|
{
|
|
u32 mask;
|
|
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
mask = QUARK_X1000_SSSR_TFL_MASK;
|
|
break;
|
|
case CE4100_SSP:
|
|
mask = CE4100_SSSR_TFL_MASK;
|
|
break;
|
|
default:
|
|
mask = SSSR_TFL_MASK;
|
|
break;
|
|
}
|
|
|
|
return (pxa2xx_spi_read(drv_data, SSSR) & mask) == mask;
|
|
}
|
|
|
|
static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data,
|
|
u32 *sccr1_reg)
|
|
{
|
|
u32 mask;
|
|
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
mask = QUARK_X1000_SSCR1_RFT;
|
|
break;
|
|
case CE4100_SSP:
|
|
mask = CE4100_SSCR1_RFT;
|
|
break;
|
|
default:
|
|
mask = SSCR1_RFT;
|
|
break;
|
|
}
|
|
*sccr1_reg &= ~mask;
|
|
}
|
|
|
|
static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data,
|
|
u32 *sccr1_reg, u32 threshold)
|
|
{
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
*sccr1_reg |= QUARK_X1000_SSCR1_RxTresh(threshold);
|
|
break;
|
|
case CE4100_SSP:
|
|
*sccr1_reg |= CE4100_SSCR1_RxTresh(threshold);
|
|
break;
|
|
default:
|
|
*sccr1_reg |= SSCR1_RxTresh(threshold);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data,
|
|
u32 clk_div, u8 bits)
|
|
{
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
return clk_div
|
|
| QUARK_X1000_SSCR0_Motorola
|
|
| QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits)
|
|
| SSCR0_SSE;
|
|
default:
|
|
return clk_div
|
|
| SSCR0_Motorola
|
|
| SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
|
|
| SSCR0_SSE
|
|
| (bits > 16 ? SSCR0_EDSS : 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read and write LPSS SSP private registers. Caller must first check that
|
|
* is_lpss_ssp() returns true before these can be called.
|
|
*/
|
|
static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset)
|
|
{
|
|
WARN_ON(!drv_data->lpss_base);
|
|
return readl(drv_data->lpss_base + offset);
|
|
}
|
|
|
|
static void __lpss_ssp_write_priv(struct driver_data *drv_data,
|
|
unsigned offset, u32 value)
|
|
{
|
|
WARN_ON(!drv_data->lpss_base);
|
|
writel(value, drv_data->lpss_base + offset);
|
|
}
|
|
|
|
/*
|
|
* lpss_ssp_setup - perform LPSS SSP specific setup
|
|
* @drv_data: pointer to the driver private data
|
|
*
|
|
* Perform LPSS SSP specific setup. This function must be called first if
|
|
* one is going to use LPSS SSP private registers.
|
|
*/
|
|
static void lpss_ssp_setup(struct driver_data *drv_data)
|
|
{
|
|
const struct lpss_config *config;
|
|
u32 value;
|
|
|
|
config = lpss_get_config(drv_data);
|
|
drv_data->lpss_base = drv_data->ioaddr + config->offset;
|
|
|
|
/* Enable software chip select control */
|
|
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
|
|
value &= ~(LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH);
|
|
value |= LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH;
|
|
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
|
|
|
|
/* Enable multiblock DMA transfers */
|
|
if (drv_data->master_info->enable_dma) {
|
|
__lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
|
|
|
|
if (config->reg_general >= 0) {
|
|
value = __lpss_ssp_read_priv(drv_data,
|
|
config->reg_general);
|
|
value |= LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE;
|
|
__lpss_ssp_write_priv(drv_data,
|
|
config->reg_general, value);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void lpss_ssp_select_cs(struct driver_data *drv_data,
|
|
const struct lpss_config *config)
|
|
{
|
|
u32 value, cs;
|
|
|
|
if (!config->cs_sel_mask)
|
|
return;
|
|
|
|
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
|
|
|
|
cs = drv_data->master->cur_msg->spi->chip_select;
|
|
cs <<= config->cs_sel_shift;
|
|
if (cs != (value & config->cs_sel_mask)) {
|
|
/*
|
|
* When switching another chip select output active the
|
|
* output must be selected first and wait 2 ssp_clk cycles
|
|
* before changing state to active. Otherwise a short
|
|
* glitch will occur on the previous chip select since
|
|
* output select is latched but state control is not.
|
|
*/
|
|
value &= ~config->cs_sel_mask;
|
|
value |= cs;
|
|
__lpss_ssp_write_priv(drv_data,
|
|
config->reg_cs_ctrl, value);
|
|
ndelay(1000000000 /
|
|
(drv_data->master->max_speed_hz / 2));
|
|
}
|
|
}
|
|
|
|
static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
|
|
{
|
|
const struct lpss_config *config;
|
|
u32 value;
|
|
|
|
config = lpss_get_config(drv_data);
|
|
|
|
if (enable)
|
|
lpss_ssp_select_cs(drv_data, config);
|
|
|
|
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
|
|
if (enable)
|
|
value &= ~LPSS_CS_CONTROL_CS_HIGH;
|
|
else
|
|
value |= LPSS_CS_CONTROL_CS_HIGH;
|
|
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
|
|
}
|
|
|
|
static void cs_assert(struct driver_data *drv_data)
|
|
{
|
|
struct chip_data *chip =
|
|
spi_get_ctldata(drv_data->master->cur_msg->spi);
|
|
|
|
if (drv_data->ssp_type == CE4100_SSP) {
|
|
pxa2xx_spi_write(drv_data, SSSR, chip->frm);
|
|
return;
|
|
}
|
|
|
|
if (chip->cs_control) {
|
|
chip->cs_control(PXA2XX_CS_ASSERT);
|
|
return;
|
|
}
|
|
|
|
if (gpio_is_valid(chip->gpio_cs)) {
|
|
gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted);
|
|
return;
|
|
}
|
|
|
|
if (is_lpss_ssp(drv_data))
|
|
lpss_ssp_cs_control(drv_data, true);
|
|
}
|
|
|
|
static void cs_deassert(struct driver_data *drv_data)
|
|
{
|
|
struct chip_data *chip =
|
|
spi_get_ctldata(drv_data->master->cur_msg->spi);
|
|
|
|
if (drv_data->ssp_type == CE4100_SSP)
|
|
return;
|
|
|
|
if (chip->cs_control) {
|
|
chip->cs_control(PXA2XX_CS_DEASSERT);
|
|
return;
|
|
}
|
|
|
|
if (gpio_is_valid(chip->gpio_cs)) {
|
|
gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted);
|
|
return;
|
|
}
|
|
|
|
if (is_lpss_ssp(drv_data))
|
|
lpss_ssp_cs_control(drv_data, false);
|
|
}
|
|
|
|
int pxa2xx_spi_flush(struct driver_data *drv_data)
|
|
{
|
|
unsigned long limit = loops_per_jiffy << 1;
|
|
|
|
do {
|
|
while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
|
|
pxa2xx_spi_read(drv_data, SSDR);
|
|
} while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit);
|
|
write_SSSR_CS(drv_data, SSSR_ROR);
|
|
|
|
return limit;
|
|
}
|
|
|
|
static int null_writer(struct driver_data *drv_data)
|
|
{
|
|
u8 n_bytes = drv_data->n_bytes;
|
|
|
|
if (pxa2xx_spi_txfifo_full(drv_data)
|
|
|| (drv_data->tx == drv_data->tx_end))
|
|
return 0;
|
|
|
|
pxa2xx_spi_write(drv_data, SSDR, 0);
|
|
drv_data->tx += n_bytes;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int null_reader(struct driver_data *drv_data)
|
|
{
|
|
u8 n_bytes = drv_data->n_bytes;
|
|
|
|
while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
|
|
&& (drv_data->rx < drv_data->rx_end)) {
|
|
pxa2xx_spi_read(drv_data, SSDR);
|
|
drv_data->rx += n_bytes;
|
|
}
|
|
|
|
return drv_data->rx == drv_data->rx_end;
|
|
}
|
|
|
|
static int u8_writer(struct driver_data *drv_data)
|
|
{
|
|
if (pxa2xx_spi_txfifo_full(drv_data)
|
|
|| (drv_data->tx == drv_data->tx_end))
|
|
return 0;
|
|
|
|
pxa2xx_spi_write(drv_data, SSDR, *(u8 *)(drv_data->tx));
|
|
++drv_data->tx;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int u8_reader(struct driver_data *drv_data)
|
|
{
|
|
while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
|
|
&& (drv_data->rx < drv_data->rx_end)) {
|
|
*(u8 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
|
|
++drv_data->rx;
|
|
}
|
|
|
|
return drv_data->rx == drv_data->rx_end;
|
|
}
|
|
|
|
static int u16_writer(struct driver_data *drv_data)
|
|
{
|
|
if (pxa2xx_spi_txfifo_full(drv_data)
|
|
|| (drv_data->tx == drv_data->tx_end))
|
|
return 0;
|
|
|
|
pxa2xx_spi_write(drv_data, SSDR, *(u16 *)(drv_data->tx));
|
|
drv_data->tx += 2;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int u16_reader(struct driver_data *drv_data)
|
|
{
|
|
while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
|
|
&& (drv_data->rx < drv_data->rx_end)) {
|
|
*(u16 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
|
|
drv_data->rx += 2;
|
|
}
|
|
|
|
return drv_data->rx == drv_data->rx_end;
|
|
}
|
|
|
|
static int u32_writer(struct driver_data *drv_data)
|
|
{
|
|
if (pxa2xx_spi_txfifo_full(drv_data)
|
|
|| (drv_data->tx == drv_data->tx_end))
|
|
return 0;
|
|
|
|
pxa2xx_spi_write(drv_data, SSDR, *(u32 *)(drv_data->tx));
|
|
drv_data->tx += 4;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int u32_reader(struct driver_data *drv_data)
|
|
{
|
|
while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
|
|
&& (drv_data->rx < drv_data->rx_end)) {
|
|
*(u32 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
|
|
drv_data->rx += 4;
|
|
}
|
|
|
|
return drv_data->rx == drv_data->rx_end;
|
|
}
|
|
|
|
void *pxa2xx_spi_next_transfer(struct driver_data *drv_data)
|
|
{
|
|
struct spi_message *msg = drv_data->master->cur_msg;
|
|
struct spi_transfer *trans = drv_data->cur_transfer;
|
|
|
|
/* Move to next transfer */
|
|
if (trans->transfer_list.next != &msg->transfers) {
|
|
drv_data->cur_transfer =
|
|
list_entry(trans->transfer_list.next,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
return RUNNING_STATE;
|
|
} else
|
|
return DONE_STATE;
|
|
}
|
|
|
|
/* caller already set message->status; dma and pio irqs are blocked */
|
|
static void giveback(struct driver_data *drv_data)
|
|
{
|
|
struct spi_transfer* last_transfer;
|
|
struct spi_message *msg;
|
|
unsigned long timeout;
|
|
|
|
msg = drv_data->master->cur_msg;
|
|
drv_data->cur_transfer = NULL;
|
|
|
|
last_transfer = list_last_entry(&msg->transfers, struct spi_transfer,
|
|
transfer_list);
|
|
|
|
/* Delay if requested before any change in chip select */
|
|
if (last_transfer->delay_usecs)
|
|
udelay(last_transfer->delay_usecs);
|
|
|
|
/* Wait until SSP becomes idle before deasserting the CS */
|
|
timeout = jiffies + msecs_to_jiffies(10);
|
|
while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY &&
|
|
!time_after(jiffies, timeout))
|
|
cpu_relax();
|
|
|
|
/* Drop chip select UNLESS cs_change is true or we are returning
|
|
* a message with an error, or next message is for another chip
|
|
*/
|
|
if (!last_transfer->cs_change)
|
|
cs_deassert(drv_data);
|
|
else {
|
|
struct spi_message *next_msg;
|
|
|
|
/* Holding of cs was hinted, but we need to make sure
|
|
* the next message is for the same chip. Don't waste
|
|
* time with the following tests unless this was hinted.
|
|
*
|
|
* We cannot postpone this until pump_messages, because
|
|
* after calling msg->complete (below) the driver that
|
|
* sent the current message could be unloaded, which
|
|
* could invalidate the cs_control() callback...
|
|
*/
|
|
|
|
/* get a pointer to the next message, if any */
|
|
next_msg = spi_get_next_queued_message(drv_data->master);
|
|
|
|
/* see if the next and current messages point
|
|
* to the same chip
|
|
*/
|
|
if ((next_msg && next_msg->spi != msg->spi) ||
|
|
msg->state == ERROR_STATE)
|
|
cs_deassert(drv_data);
|
|
}
|
|
|
|
spi_finalize_current_message(drv_data->master);
|
|
}
|
|
|
|
static void reset_sccr1(struct driver_data *drv_data)
|
|
{
|
|
struct chip_data *chip =
|
|
spi_get_ctldata(drv_data->master->cur_msg->spi);
|
|
u32 sccr1_reg;
|
|
|
|
sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
|
|
break;
|
|
case CE4100_SSP:
|
|
sccr1_reg &= ~CE4100_SSCR1_RFT;
|
|
break;
|
|
default:
|
|
sccr1_reg &= ~SSCR1_RFT;
|
|
break;
|
|
}
|
|
sccr1_reg |= chip->threshold;
|
|
pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
|
|
}
|
|
|
|
static void int_error_stop(struct driver_data *drv_data, const char* msg)
|
|
{
|
|
/* Stop and reset SSP */
|
|
write_SSSR_CS(drv_data, drv_data->clear_sr);
|
|
reset_sccr1(drv_data);
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, 0);
|
|
pxa2xx_spi_flush(drv_data);
|
|
pxa2xx_spi_write(drv_data, SSCR0,
|
|
pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
|
|
|
|
dev_err(&drv_data->pdev->dev, "%s\n", msg);
|
|
|
|
drv_data->master->cur_msg->state = ERROR_STATE;
|
|
tasklet_schedule(&drv_data->pump_transfers);
|
|
}
|
|
|
|
static void int_transfer_complete(struct driver_data *drv_data)
|
|
{
|
|
/* Clear and disable interrupts */
|
|
write_SSSR_CS(drv_data, drv_data->clear_sr);
|
|
reset_sccr1(drv_data);
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, 0);
|
|
|
|
/* Update total byte transferred return count actual bytes read */
|
|
drv_data->master->cur_msg->actual_length += drv_data->len -
|
|
(drv_data->rx_end - drv_data->rx);
|
|
|
|
/* Transfer delays and chip select release are
|
|
* handled in pump_transfers or giveback
|
|
*/
|
|
|
|
/* Move to next transfer */
|
|
drv_data->master->cur_msg->state = pxa2xx_spi_next_transfer(drv_data);
|
|
|
|
/* Schedule transfer tasklet */
|
|
tasklet_schedule(&drv_data->pump_transfers);
|
|
}
|
|
|
|
static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
|
|
{
|
|
u32 irq_mask = (pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE) ?
|
|
drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
|
|
|
|
u32 irq_status = pxa2xx_spi_read(drv_data, SSSR) & irq_mask;
|
|
|
|
if (irq_status & SSSR_ROR) {
|
|
int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (irq_status & SSSR_TINT) {
|
|
pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
|
|
if (drv_data->read(drv_data)) {
|
|
int_transfer_complete(drv_data);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Drain rx fifo, Fill tx fifo and prevent overruns */
|
|
do {
|
|
if (drv_data->read(drv_data)) {
|
|
int_transfer_complete(drv_data);
|
|
return IRQ_HANDLED;
|
|
}
|
|
} while (drv_data->write(drv_data));
|
|
|
|
if (drv_data->read(drv_data)) {
|
|
int_transfer_complete(drv_data);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (drv_data->tx == drv_data->tx_end) {
|
|
u32 bytes_left;
|
|
u32 sccr1_reg;
|
|
|
|
sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
|
|
sccr1_reg &= ~SSCR1_TIE;
|
|
|
|
/*
|
|
* PXA25x_SSP has no timeout, set up rx threshould for the
|
|
* remaining RX bytes.
|
|
*/
|
|
if (pxa25x_ssp_comp(drv_data)) {
|
|
u32 rx_thre;
|
|
|
|
pxa2xx_spi_clear_rx_thre(drv_data, &sccr1_reg);
|
|
|
|
bytes_left = drv_data->rx_end - drv_data->rx;
|
|
switch (drv_data->n_bytes) {
|
|
case 4:
|
|
bytes_left >>= 1;
|
|
case 2:
|
|
bytes_left >>= 1;
|
|
}
|
|
|
|
rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data);
|
|
if (rx_thre > bytes_left)
|
|
rx_thre = bytes_left;
|
|
|
|
pxa2xx_spi_set_rx_thre(drv_data, &sccr1_reg, rx_thre);
|
|
}
|
|
pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
|
|
}
|
|
|
|
/* We did something */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t ssp_int(int irq, void *dev_id)
|
|
{
|
|
struct driver_data *drv_data = dev_id;
|
|
u32 sccr1_reg;
|
|
u32 mask = drv_data->mask_sr;
|
|
u32 status;
|
|
|
|
/*
|
|
* The IRQ might be shared with other peripherals so we must first
|
|
* check that are we RPM suspended or not. If we are we assume that
|
|
* the IRQ was not for us (we shouldn't be RPM suspended when the
|
|
* interrupt is enabled).
|
|
*/
|
|
if (pm_runtime_suspended(&drv_data->pdev->dev))
|
|
return IRQ_NONE;
|
|
|
|
/*
|
|
* If the device is not yet in RPM suspended state and we get an
|
|
* interrupt that is meant for another device, check if status bits
|
|
* are all set to one. That means that the device is already
|
|
* powered off.
|
|
*/
|
|
status = pxa2xx_spi_read(drv_data, SSSR);
|
|
if (status == ~0)
|
|
return IRQ_NONE;
|
|
|
|
sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
|
|
|
|
/* Ignore possible writes if we don't need to write */
|
|
if (!(sccr1_reg & SSCR1_TIE))
|
|
mask &= ~SSSR_TFS;
|
|
|
|
/* Ignore RX timeout interrupt if it is disabled */
|
|
if (!(sccr1_reg & SSCR1_TINTE))
|
|
mask &= ~SSSR_TINT;
|
|
|
|
if (!(status & mask))
|
|
return IRQ_NONE;
|
|
|
|
if (!drv_data->master->cur_msg) {
|
|
|
|
pxa2xx_spi_write(drv_data, SSCR0,
|
|
pxa2xx_spi_read(drv_data, SSCR0)
|
|
& ~SSCR0_SSE);
|
|
pxa2xx_spi_write(drv_data, SSCR1,
|
|
pxa2xx_spi_read(drv_data, SSCR1)
|
|
& ~drv_data->int_cr1);
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, 0);
|
|
write_SSSR_CS(drv_data, drv_data->clear_sr);
|
|
|
|
dev_err(&drv_data->pdev->dev,
|
|
"bad message state in interrupt handler\n");
|
|
|
|
/* Never fail */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return drv_data->transfer_handler(drv_data);
|
|
}
|
|
|
|
/*
|
|
* The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply
|
|
* input frequency by fractions of 2^24. It also has a divider by 5.
|
|
*
|
|
* There are formulas to get baud rate value for given input frequency and
|
|
* divider parameters, such as DDS_CLK_RATE and SCR:
|
|
*
|
|
* Fsys = 200MHz
|
|
*
|
|
* Fssp = Fsys * DDS_CLK_RATE / 2^24 (1)
|
|
* Baud rate = Fsclk = Fssp / (2 * (SCR + 1)) (2)
|
|
*
|
|
* DDS_CLK_RATE either 2^n or 2^n / 5.
|
|
* SCR is in range 0 .. 255
|
|
*
|
|
* Divisor = 5^i * 2^j * 2 * k
|
|
* i = [0, 1] i = 1 iff j = 0 or j > 3
|
|
* j = [0, 23] j = 0 iff i = 1
|
|
* k = [1, 256]
|
|
* Special case: j = 0, i = 1: Divisor = 2 / 5
|
|
*
|
|
* Accordingly to the specification the recommended values for DDS_CLK_RATE
|
|
* are:
|
|
* Case 1: 2^n, n = [0, 23]
|
|
* Case 2: 2^24 * 2 / 5 (0x666666)
|
|
* Case 3: less than or equal to 2^24 / 5 / 16 (0x33333)
|
|
*
|
|
* In all cases the lowest possible value is better.
|
|
*
|
|
* The function calculates parameters for all cases and chooses the one closest
|
|
* to the asked baud rate.
|
|
*/
|
|
static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds)
|
|
{
|
|
unsigned long xtal = 200000000;
|
|
unsigned long fref = xtal / 2; /* mandatory division by 2,
|
|
see (2) */
|
|
/* case 3 */
|
|
unsigned long fref1 = fref / 2; /* case 1 */
|
|
unsigned long fref2 = fref * 2 / 5; /* case 2 */
|
|
unsigned long scale;
|
|
unsigned long q, q1, q2;
|
|
long r, r1, r2;
|
|
u32 mul;
|
|
|
|
/* Case 1 */
|
|
|
|
/* Set initial value for DDS_CLK_RATE */
|
|
mul = (1 << 24) >> 1;
|
|
|
|
/* Calculate initial quot */
|
|
q1 = DIV_ROUND_UP(fref1, rate);
|
|
|
|
/* Scale q1 if it's too big */
|
|
if (q1 > 256) {
|
|
/* Scale q1 to range [1, 512] */
|
|
scale = fls_long(q1 - 1);
|
|
if (scale > 9) {
|
|
q1 >>= scale - 9;
|
|
mul >>= scale - 9;
|
|
}
|
|
|
|
/* Round the result if we have a remainder */
|
|
q1 += q1 & 1;
|
|
}
|
|
|
|
/* Decrease DDS_CLK_RATE as much as we can without loss in precision */
|
|
scale = __ffs(q1);
|
|
q1 >>= scale;
|
|
mul >>= scale;
|
|
|
|
/* Get the remainder */
|
|
r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate);
|
|
|
|
/* Case 2 */
|
|
|
|
q2 = DIV_ROUND_UP(fref2, rate);
|
|
r2 = abs(fref2 / q2 - rate);
|
|
|
|
/*
|
|
* Choose the best between two: less remainder we have the better. We
|
|
* can't go case 2 if q2 is greater than 256 since SCR register can
|
|
* hold only values 0 .. 255.
|
|
*/
|
|
if (r2 >= r1 || q2 > 256) {
|
|
/* case 1 is better */
|
|
r = r1;
|
|
q = q1;
|
|
} else {
|
|
/* case 2 is better */
|
|
r = r2;
|
|
q = q2;
|
|
mul = (1 << 24) * 2 / 5;
|
|
}
|
|
|
|
/* Check case 3 only if the divisor is big enough */
|
|
if (fref / rate >= 80) {
|
|
u64 fssp;
|
|
u32 m;
|
|
|
|
/* Calculate initial quot */
|
|
q1 = DIV_ROUND_UP(fref, rate);
|
|
m = (1 << 24) / q1;
|
|
|
|
/* Get the remainder */
|
|
fssp = (u64)fref * m;
|
|
do_div(fssp, 1 << 24);
|
|
r1 = abs(fssp - rate);
|
|
|
|
/* Choose this one if it suits better */
|
|
if (r1 < r) {
|
|
/* case 3 is better */
|
|
q = 1;
|
|
mul = m;
|
|
}
|
|
}
|
|
|
|
*dds = mul;
|
|
return q - 1;
|
|
}
|
|
|
|
static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
|
|
{
|
|
unsigned long ssp_clk = drv_data->master->max_speed_hz;
|
|
const struct ssp_device *ssp = drv_data->ssp;
|
|
|
|
rate = min_t(int, ssp_clk, rate);
|
|
|
|
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
|
|
return (ssp_clk / (2 * rate) - 1) & 0xff;
|
|
else
|
|
return (ssp_clk / rate - 1) & 0xfff;
|
|
}
|
|
|
|
static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
|
|
int rate)
|
|
{
|
|
struct chip_data *chip =
|
|
spi_get_ctldata(drv_data->master->cur_msg->spi);
|
|
unsigned int clk_div;
|
|
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate);
|
|
break;
|
|
default:
|
|
clk_div = ssp_get_clk_div(drv_data, rate);
|
|
break;
|
|
}
|
|
return clk_div << 8;
|
|
}
|
|
|
|
static bool pxa2xx_spi_can_dma(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct chip_data *chip = spi_get_ctldata(spi);
|
|
|
|
return chip->enable_dma &&
|
|
xfer->len <= MAX_DMA_LEN &&
|
|
xfer->len >= chip->dma_burst_size;
|
|
}
|
|
|
|
static void pump_transfers(unsigned long data)
|
|
{
|
|
struct driver_data *drv_data = (struct driver_data *)data;
|
|
struct spi_master *master = drv_data->master;
|
|
struct spi_message *message = master->cur_msg;
|
|
struct chip_data *chip = spi_get_ctldata(message->spi);
|
|
u32 dma_thresh = chip->dma_threshold;
|
|
u32 dma_burst = chip->dma_burst_size;
|
|
u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data);
|
|
struct spi_transfer *transfer;
|
|
struct spi_transfer *previous;
|
|
u32 clk_div;
|
|
u8 bits;
|
|
u32 speed;
|
|
u32 cr0;
|
|
u32 cr1;
|
|
int err;
|
|
int dma_mapped;
|
|
|
|
/* Get current state information */
|
|
transfer = drv_data->cur_transfer;
|
|
|
|
/* Handle for abort */
|
|
if (message->state == ERROR_STATE) {
|
|
message->status = -EIO;
|
|
giveback(drv_data);
|
|
return;
|
|
}
|
|
|
|
/* Handle end of message */
|
|
if (message->state == DONE_STATE) {
|
|
message->status = 0;
|
|
giveback(drv_data);
|
|
return;
|
|
}
|
|
|
|
/* Delay if requested at end of transfer before CS change */
|
|
if (message->state == RUNNING_STATE) {
|
|
previous = list_entry(transfer->transfer_list.prev,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
if (previous->delay_usecs)
|
|
udelay(previous->delay_usecs);
|
|
|
|
/* Drop chip select only if cs_change is requested */
|
|
if (previous->cs_change)
|
|
cs_deassert(drv_data);
|
|
}
|
|
|
|
/* Check if we can DMA this transfer */
|
|
if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
|
|
|
|
/* reject already-mapped transfers; PIO won't always work */
|
|
if (message->is_dma_mapped
|
|
|| transfer->rx_dma || transfer->tx_dma) {
|
|
dev_err(&drv_data->pdev->dev,
|
|
"pump_transfers: mapped transfer length of "
|
|
"%u is greater than %d\n",
|
|
transfer->len, MAX_DMA_LEN);
|
|
message->status = -EINVAL;
|
|
giveback(drv_data);
|
|
return;
|
|
}
|
|
|
|
/* warn ... we force this to PIO mode */
|
|
dev_warn_ratelimited(&message->spi->dev,
|
|
"pump_transfers: DMA disabled for transfer length %ld "
|
|
"greater than %d\n",
|
|
(long)drv_data->len, MAX_DMA_LEN);
|
|
}
|
|
|
|
/* Setup the transfer state based on the type of transfer */
|
|
if (pxa2xx_spi_flush(drv_data) == 0) {
|
|
dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
|
|
message->status = -EIO;
|
|
giveback(drv_data);
|
|
return;
|
|
}
|
|
drv_data->n_bytes = chip->n_bytes;
|
|
drv_data->tx = (void *)transfer->tx_buf;
|
|
drv_data->tx_end = drv_data->tx + transfer->len;
|
|
drv_data->rx = transfer->rx_buf;
|
|
drv_data->rx_end = drv_data->rx + transfer->len;
|
|
drv_data->len = transfer->len;
|
|
drv_data->write = drv_data->tx ? chip->write : null_writer;
|
|
drv_data->read = drv_data->rx ? chip->read : null_reader;
|
|
|
|
/* Change speed and bit per word on a per transfer */
|
|
bits = transfer->bits_per_word;
|
|
speed = transfer->speed_hz;
|
|
|
|
clk_div = pxa2xx_ssp_get_clk_div(drv_data, speed);
|
|
|
|
if (bits <= 8) {
|
|
drv_data->n_bytes = 1;
|
|
drv_data->read = drv_data->read != null_reader ?
|
|
u8_reader : null_reader;
|
|
drv_data->write = drv_data->write != null_writer ?
|
|
u8_writer : null_writer;
|
|
} else if (bits <= 16) {
|
|
drv_data->n_bytes = 2;
|
|
drv_data->read = drv_data->read != null_reader ?
|
|
u16_reader : null_reader;
|
|
drv_data->write = drv_data->write != null_writer ?
|
|
u16_writer : null_writer;
|
|
} else if (bits <= 32) {
|
|
drv_data->n_bytes = 4;
|
|
drv_data->read = drv_data->read != null_reader ?
|
|
u32_reader : null_reader;
|
|
drv_data->write = drv_data->write != null_writer ?
|
|
u32_writer : null_writer;
|
|
}
|
|
/*
|
|
* if bits/word is changed in dma mode, then must check the
|
|
* thresholds and burst also
|
|
*/
|
|
if (chip->enable_dma) {
|
|
if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
|
|
message->spi,
|
|
bits, &dma_burst,
|
|
&dma_thresh))
|
|
dev_warn_ratelimited(&message->spi->dev,
|
|
"pump_transfers: DMA burst size reduced to match bits_per_word\n");
|
|
}
|
|
|
|
message->state = RUNNING_STATE;
|
|
|
|
dma_mapped = master->can_dma &&
|
|
master->can_dma(master, message->spi, transfer) &&
|
|
master->cur_msg_mapped;
|
|
if (dma_mapped) {
|
|
|
|
/* Ensure we have the correct interrupt handler */
|
|
drv_data->transfer_handler = pxa2xx_spi_dma_transfer;
|
|
|
|
err = pxa2xx_spi_dma_prepare(drv_data, dma_burst);
|
|
if (err) {
|
|
message->status = err;
|
|
giveback(drv_data);
|
|
return;
|
|
}
|
|
|
|
/* Clear status and start DMA engine */
|
|
cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
|
|
pxa2xx_spi_write(drv_data, SSSR, drv_data->clear_sr);
|
|
|
|
pxa2xx_spi_dma_start(drv_data);
|
|
} else {
|
|
/* Ensure we have the correct interrupt handler */
|
|
drv_data->transfer_handler = interrupt_transfer;
|
|
|
|
/* Clear status */
|
|
cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
|
|
write_SSSR_CS(drv_data, drv_data->clear_sr);
|
|
}
|
|
|
|
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
|
|
cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
|
|
master->max_speed_hz
|
|
/ (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
|
|
dma_mapped ? "DMA" : "PIO");
|
|
else
|
|
dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
|
|
master->max_speed_hz / 2
|
|
/ (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
|
|
dma_mapped ? "DMA" : "PIO");
|
|
|
|
if (is_lpss_ssp(drv_data)) {
|
|
if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff)
|
|
!= chip->lpss_rx_threshold)
|
|
pxa2xx_spi_write(drv_data, SSIRF,
|
|
chip->lpss_rx_threshold);
|
|
if ((pxa2xx_spi_read(drv_data, SSITF) & 0xffff)
|
|
!= chip->lpss_tx_threshold)
|
|
pxa2xx_spi_write(drv_data, SSITF,
|
|
chip->lpss_tx_threshold);
|
|
}
|
|
|
|
if (is_quark_x1000_ssp(drv_data) &&
|
|
(pxa2xx_spi_read(drv_data, DDS_RATE) != chip->dds_rate))
|
|
pxa2xx_spi_write(drv_data, DDS_RATE, chip->dds_rate);
|
|
|
|
/* see if we need to reload the config registers */
|
|
if ((pxa2xx_spi_read(drv_data, SSCR0) != cr0)
|
|
|| (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
|
|
!= (cr1 & change_mask)) {
|
|
/* stop the SSP, and update the other bits */
|
|
pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
|
|
/* first set CR1 without interrupt and service enables */
|
|
pxa2xx_spi_write(drv_data, SSCR1, cr1 & change_mask);
|
|
/* restart the SSP */
|
|
pxa2xx_spi_write(drv_data, SSCR0, cr0);
|
|
|
|
} else {
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
|
|
}
|
|
|
|
cs_assert(drv_data);
|
|
|
|
/* after chip select, release the data by enabling service
|
|
* requests and interrupts, without changing any mode bits */
|
|
pxa2xx_spi_write(drv_data, SSCR1, cr1);
|
|
}
|
|
|
|
static int pxa2xx_spi_transfer_one_message(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct driver_data *drv_data = spi_master_get_devdata(master);
|
|
|
|
/* Initial message state*/
|
|
msg->state = START_STATE;
|
|
drv_data->cur_transfer = list_entry(msg->transfers.next,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
|
|
/* Mark as busy and launch transfers */
|
|
tasklet_schedule(&drv_data->pump_transfers);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_spi_unprepare_transfer(struct spi_master *master)
|
|
{
|
|
struct driver_data *drv_data = spi_master_get_devdata(master);
|
|
|
|
/* Disable the SSP now */
|
|
pxa2xx_spi_write(drv_data, SSCR0,
|
|
pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int setup_cs(struct spi_device *spi, struct chip_data *chip,
|
|
struct pxa2xx_spi_chip *chip_info)
|
|
{
|
|
int err = 0;
|
|
|
|
if (chip == NULL || chip_info == NULL)
|
|
return 0;
|
|
|
|
/* NOTE: setup() can be called multiple times, possibly with
|
|
* different chip_info, release previously requested GPIO
|
|
*/
|
|
if (gpio_is_valid(chip->gpio_cs))
|
|
gpio_free(chip->gpio_cs);
|
|
|
|
/* If (*cs_control) is provided, ignore GPIO chip select */
|
|
if (chip_info->cs_control) {
|
|
chip->cs_control = chip_info->cs_control;
|
|
return 0;
|
|
}
|
|
|
|
if (gpio_is_valid(chip_info->gpio_cs)) {
|
|
err = gpio_request(chip_info->gpio_cs, "SPI_CS");
|
|
if (err) {
|
|
dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
|
|
chip_info->gpio_cs);
|
|
return err;
|
|
}
|
|
|
|
chip->gpio_cs = chip_info->gpio_cs;
|
|
chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
|
|
|
|
err = gpio_direction_output(chip->gpio_cs,
|
|
!chip->gpio_cs_inverted);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int setup(struct spi_device *spi)
|
|
{
|
|
struct pxa2xx_spi_chip *chip_info;
|
|
struct chip_data *chip;
|
|
const struct lpss_config *config;
|
|
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
|
|
uint tx_thres, tx_hi_thres, rx_thres;
|
|
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
tx_thres = TX_THRESH_QUARK_X1000_DFLT;
|
|
tx_hi_thres = 0;
|
|
rx_thres = RX_THRESH_QUARK_X1000_DFLT;
|
|
break;
|
|
case CE4100_SSP:
|
|
tx_thres = TX_THRESH_CE4100_DFLT;
|
|
tx_hi_thres = 0;
|
|
rx_thres = RX_THRESH_CE4100_DFLT;
|
|
break;
|
|
case LPSS_LPT_SSP:
|
|
case LPSS_BYT_SSP:
|
|
case LPSS_BSW_SSP:
|
|
case LPSS_SPT_SSP:
|
|
case LPSS_BXT_SSP:
|
|
config = lpss_get_config(drv_data);
|
|
tx_thres = config->tx_threshold_lo;
|
|
tx_hi_thres = config->tx_threshold_hi;
|
|
rx_thres = config->rx_threshold;
|
|
break;
|
|
default:
|
|
tx_thres = TX_THRESH_DFLT;
|
|
tx_hi_thres = 0;
|
|
rx_thres = RX_THRESH_DFLT;
|
|
break;
|
|
}
|
|
|
|
/* Only alloc on first setup */
|
|
chip = spi_get_ctldata(spi);
|
|
if (!chip) {
|
|
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
if (drv_data->ssp_type == CE4100_SSP) {
|
|
if (spi->chip_select > 4) {
|
|
dev_err(&spi->dev,
|
|
"failed setup: cs number must not be > 4.\n");
|
|
kfree(chip);
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip->frm = spi->chip_select;
|
|
} else
|
|
chip->gpio_cs = -1;
|
|
chip->enable_dma = drv_data->master_info->enable_dma;
|
|
chip->timeout = TIMOUT_DFLT;
|
|
}
|
|
|
|
/* protocol drivers may change the chip settings, so...
|
|
* if chip_info exists, use it */
|
|
chip_info = spi->controller_data;
|
|
|
|
/* chip_info isn't always needed */
|
|
chip->cr1 = 0;
|
|
if (chip_info) {
|
|
if (chip_info->timeout)
|
|
chip->timeout = chip_info->timeout;
|
|
if (chip_info->tx_threshold)
|
|
tx_thres = chip_info->tx_threshold;
|
|
if (chip_info->tx_hi_threshold)
|
|
tx_hi_thres = chip_info->tx_hi_threshold;
|
|
if (chip_info->rx_threshold)
|
|
rx_thres = chip_info->rx_threshold;
|
|
chip->dma_threshold = 0;
|
|
if (chip_info->enable_loopback)
|
|
chip->cr1 = SSCR1_LBM;
|
|
}
|
|
|
|
chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres);
|
|
chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres)
|
|
| SSITF_TxHiThresh(tx_hi_thres);
|
|
|
|
/* set dma burst and threshold outside of chip_info path so that if
|
|
* chip_info goes away after setting chip->enable_dma, the
|
|
* burst and threshold can still respond to changes in bits_per_word */
|
|
if (chip->enable_dma) {
|
|
/* set up legal burst and threshold for dma */
|
|
if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
|
|
spi->bits_per_word,
|
|
&chip->dma_burst_size,
|
|
&chip->dma_threshold)) {
|
|
dev_warn(&spi->dev,
|
|
"in setup: DMA burst size reduced to match bits_per_word\n");
|
|
}
|
|
}
|
|
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres)
|
|
& QUARK_X1000_SSCR1_RFT)
|
|
| (QUARK_X1000_SSCR1_TxTresh(tx_thres)
|
|
& QUARK_X1000_SSCR1_TFT);
|
|
break;
|
|
case CE4100_SSP:
|
|
chip->threshold = (CE4100_SSCR1_RxTresh(rx_thres) & CE4100_SSCR1_RFT) |
|
|
(CE4100_SSCR1_TxTresh(tx_thres) & CE4100_SSCR1_TFT);
|
|
break;
|
|
default:
|
|
chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
|
|
(SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
|
|
break;
|
|
}
|
|
|
|
chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
|
|
chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
|
|
| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
|
|
|
|
if (spi->mode & SPI_LOOP)
|
|
chip->cr1 |= SSCR1_LBM;
|
|
|
|
if (spi->bits_per_word <= 8) {
|
|
chip->n_bytes = 1;
|
|
chip->read = u8_reader;
|
|
chip->write = u8_writer;
|
|
} else if (spi->bits_per_word <= 16) {
|
|
chip->n_bytes = 2;
|
|
chip->read = u16_reader;
|
|
chip->write = u16_writer;
|
|
} else if (spi->bits_per_word <= 32) {
|
|
chip->n_bytes = 4;
|
|
chip->read = u32_reader;
|
|
chip->write = u32_writer;
|
|
}
|
|
|
|
spi_set_ctldata(spi, chip);
|
|
|
|
if (drv_data->ssp_type == CE4100_SSP)
|
|
return 0;
|
|
|
|
return setup_cs(spi, chip, chip_info);
|
|
}
|
|
|
|
static void cleanup(struct spi_device *spi)
|
|
{
|
|
struct chip_data *chip = spi_get_ctldata(spi);
|
|
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
|
|
|
|
if (!chip)
|
|
return;
|
|
|
|
if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
|
|
gpio_free(chip->gpio_cs);
|
|
|
|
kfree(chip);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
#ifdef CONFIG_ACPI
|
|
|
|
static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
|
|
{ "INT33C0", LPSS_LPT_SSP },
|
|
{ "INT33C1", LPSS_LPT_SSP },
|
|
{ "INT3430", LPSS_LPT_SSP },
|
|
{ "INT3431", LPSS_LPT_SSP },
|
|
{ "80860F0E", LPSS_BYT_SSP },
|
|
{ "8086228E", LPSS_BSW_SSP },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
|
|
|
|
static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
|
|
{
|
|
unsigned int devid;
|
|
int port_id = -1;
|
|
|
|
if (adev && adev->pnp.unique_id &&
|
|
!kstrtouint(adev->pnp.unique_id, 0, &devid))
|
|
port_id = devid;
|
|
return port_id;
|
|
}
|
|
#else /* !CONFIG_ACPI */
|
|
static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
|
|
{
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* PCI IDs of compound devices that integrate both host controller and private
|
|
* integrated DMA engine. Please note these are not used in module
|
|
* autoloading and probing in this module but matching the LPSS SSP type.
|
|
*/
|
|
static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
|
|
/* SPT-LP */
|
|
{ PCI_VDEVICE(INTEL, 0x9d29), LPSS_SPT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x9d2a), LPSS_SPT_SSP },
|
|
/* SPT-H */
|
|
{ PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP },
|
|
/* KBL-H */
|
|
{ PCI_VDEVICE(INTEL, 0xa2a9), LPSS_SPT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0xa2aa), LPSS_SPT_SSP },
|
|
/* BXT A-Step */
|
|
{ PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP },
|
|
/* BXT B-Step */
|
|
{ PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
|
|
/* APL */
|
|
{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
|
|
{ PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP },
|
|
{ },
|
|
};
|
|
|
|
static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
|
|
{
|
|
struct device *dev = param;
|
|
|
|
if (dev != chan->device->dev->parent)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static struct pxa2xx_spi_master *
|
|
pxa2xx_spi_init_pdata(struct platform_device *pdev)
|
|
{
|
|
struct pxa2xx_spi_master *pdata;
|
|
struct acpi_device *adev;
|
|
struct ssp_device *ssp;
|
|
struct resource *res;
|
|
const struct acpi_device_id *adev_id = NULL;
|
|
const struct pci_device_id *pcidev_id = NULL;
|
|
int type;
|
|
|
|
adev = ACPI_COMPANION(&pdev->dev);
|
|
|
|
if (dev_is_pci(pdev->dev.parent))
|
|
pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match,
|
|
to_pci_dev(pdev->dev.parent));
|
|
else if (adev)
|
|
adev_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
|
|
&pdev->dev);
|
|
else
|
|
return NULL;
|
|
|
|
if (adev_id)
|
|
type = (int)adev_id->driver_data;
|
|
else if (pcidev_id)
|
|
type = (int)pcidev_id->driver_data;
|
|
else
|
|
return NULL;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return NULL;
|
|
|
|
ssp = &pdata->ssp;
|
|
|
|
ssp->phys_base = res->start;
|
|
ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ssp->mmio_base))
|
|
return NULL;
|
|
|
|
if (pcidev_id) {
|
|
pdata->tx_param = pdev->dev.parent;
|
|
pdata->rx_param = pdev->dev.parent;
|
|
pdata->dma_filter = pxa2xx_spi_idma_filter;
|
|
}
|
|
|
|
ssp->clk = devm_clk_get(&pdev->dev, NULL);
|
|
ssp->irq = platform_get_irq(pdev, 0);
|
|
ssp->type = type;
|
|
ssp->pdev = pdev;
|
|
ssp->port_id = pxa2xx_spi_get_port_id(adev);
|
|
|
|
pdata->num_chipselect = 1;
|
|
pdata->enable_dma = true;
|
|
|
|
return pdata;
|
|
}
|
|
|
|
#else /* !CONFIG_PCI */
|
|
static inline struct pxa2xx_spi_master *
|
|
pxa2xx_spi_init_pdata(struct platform_device *pdev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int pxa2xx_spi_fw_translate_cs(struct spi_master *master, unsigned cs)
|
|
{
|
|
struct driver_data *drv_data = spi_master_get_devdata(master);
|
|
|
|
if (has_acpi_companion(&drv_data->pdev->dev)) {
|
|
switch (drv_data->ssp_type) {
|
|
/*
|
|
* For Atoms the ACPI DeviceSelection used by the Windows
|
|
* driver starts from 1 instead of 0 so translate it here
|
|
* to match what Linux expects.
|
|
*/
|
|
case LPSS_BYT_SSP:
|
|
case LPSS_BSW_SSP:
|
|
return cs - 1;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return cs;
|
|
}
|
|
|
|
static int pxa2xx_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pxa2xx_spi_master *platform_info;
|
|
struct spi_master *master;
|
|
struct driver_data *drv_data;
|
|
struct ssp_device *ssp;
|
|
const struct lpss_config *config;
|
|
int status;
|
|
u32 tmp;
|
|
|
|
platform_info = dev_get_platdata(dev);
|
|
if (!platform_info) {
|
|
platform_info = pxa2xx_spi_init_pdata(pdev);
|
|
if (!platform_info) {
|
|
dev_err(&pdev->dev, "missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
ssp = pxa_ssp_request(pdev->id, pdev->name);
|
|
if (!ssp)
|
|
ssp = &platform_info->ssp;
|
|
|
|
if (!ssp->mmio_base) {
|
|
dev_err(&pdev->dev, "failed to get ssp\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
master = spi_alloc_master(dev, sizeof(struct driver_data));
|
|
if (!master) {
|
|
dev_err(&pdev->dev, "cannot alloc spi_master\n");
|
|
pxa_ssp_free(ssp);
|
|
return -ENOMEM;
|
|
}
|
|
drv_data = spi_master_get_devdata(master);
|
|
drv_data->master = master;
|
|
drv_data->master_info = platform_info;
|
|
drv_data->pdev = pdev;
|
|
drv_data->ssp = ssp;
|
|
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
/* the spi->mode bits understood by this driver: */
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
|
|
|
|
master->bus_num = ssp->port_id;
|
|
master->dma_alignment = DMA_ALIGNMENT;
|
|
master->cleanup = cleanup;
|
|
master->setup = setup;
|
|
master->transfer_one_message = pxa2xx_spi_transfer_one_message;
|
|
master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
|
|
master->fw_translate_cs = pxa2xx_spi_fw_translate_cs;
|
|
master->auto_runtime_pm = true;
|
|
master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
|
|
|
|
drv_data->ssp_type = ssp->type;
|
|
|
|
drv_data->ioaddr = ssp->mmio_base;
|
|
drv_data->ssdr_physical = ssp->phys_base + SSDR;
|
|
if (pxa25x_ssp_comp(drv_data)) {
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
break;
|
|
default:
|
|
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
|
|
break;
|
|
}
|
|
|
|
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
|
|
drv_data->dma_cr1 = 0;
|
|
drv_data->clear_sr = SSSR_ROR;
|
|
drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
|
|
} else {
|
|
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
|
|
drv_data->dma_cr1 = DEFAULT_DMA_CR1;
|
|
drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
|
|
drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
|
|
}
|
|
|
|
status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
|
|
drv_data);
|
|
if (status < 0) {
|
|
dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
|
|
goto out_error_master_alloc;
|
|
}
|
|
|
|
/* Setup DMA if requested */
|
|
if (platform_info->enable_dma) {
|
|
status = pxa2xx_spi_dma_setup(drv_data);
|
|
if (status) {
|
|
dev_dbg(dev, "no DMA channels available, using PIO\n");
|
|
platform_info->enable_dma = false;
|
|
} else {
|
|
master->can_dma = pxa2xx_spi_can_dma;
|
|
}
|
|
}
|
|
|
|
/* Enable SOC clock */
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
master->max_speed_hz = clk_get_rate(ssp->clk);
|
|
|
|
/* Load default SSP configuration */
|
|
pxa2xx_spi_write(drv_data, SSCR0, 0);
|
|
switch (drv_data->ssp_type) {
|
|
case QUARK_X1000_SSP:
|
|
tmp = QUARK_X1000_SSCR1_RxTresh(RX_THRESH_QUARK_X1000_DFLT) |
|
|
QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT);
|
|
pxa2xx_spi_write(drv_data, SSCR1, tmp);
|
|
|
|
/* using the Motorola SPI protocol and use 8 bit frame */
|
|
tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8);
|
|
pxa2xx_spi_write(drv_data, SSCR0, tmp);
|
|
break;
|
|
case CE4100_SSP:
|
|
tmp = CE4100_SSCR1_RxTresh(RX_THRESH_CE4100_DFLT) |
|
|
CE4100_SSCR1_TxTresh(TX_THRESH_CE4100_DFLT);
|
|
pxa2xx_spi_write(drv_data, SSCR1, tmp);
|
|
tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8);
|
|
pxa2xx_spi_write(drv_data, SSCR0, tmp);
|
|
default:
|
|
tmp = SSCR1_RxTresh(RX_THRESH_DFLT) |
|
|
SSCR1_TxTresh(TX_THRESH_DFLT);
|
|
pxa2xx_spi_write(drv_data, SSCR1, tmp);
|
|
tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8);
|
|
pxa2xx_spi_write(drv_data, SSCR0, tmp);
|
|
break;
|
|
}
|
|
|
|
if (!pxa25x_ssp_comp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSTO, 0);
|
|
|
|
if (!is_quark_x1000_ssp(drv_data))
|
|
pxa2xx_spi_write(drv_data, SSPSP, 0);
|
|
|
|
if (is_lpss_ssp(drv_data)) {
|
|
lpss_ssp_setup(drv_data);
|
|
config = lpss_get_config(drv_data);
|
|
if (config->reg_capabilities >= 0) {
|
|
tmp = __lpss_ssp_read_priv(drv_data,
|
|
config->reg_capabilities);
|
|
tmp &= LPSS_CAPS_CS_EN_MASK;
|
|
tmp >>= LPSS_CAPS_CS_EN_SHIFT;
|
|
platform_info->num_chipselect = ffz(tmp);
|
|
} else if (config->cs_num) {
|
|
platform_info->num_chipselect = config->cs_num;
|
|
}
|
|
}
|
|
master->num_chipselect = platform_info->num_chipselect;
|
|
|
|
tasklet_init(&drv_data->pump_transfers, pump_transfers,
|
|
(unsigned long)drv_data);
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
/* Register with the SPI framework */
|
|
platform_set_drvdata(pdev, drv_data);
|
|
status = devm_spi_register_master(&pdev->dev, master);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "problem registering spi master\n");
|
|
goto out_error_clock_enabled;
|
|
}
|
|
|
|
return status;
|
|
|
|
out_error_clock_enabled:
|
|
clk_disable_unprepare(ssp->clk);
|
|
pxa2xx_spi_dma_release(drv_data);
|
|
free_irq(ssp->irq, drv_data);
|
|
|
|
out_error_master_alloc:
|
|
spi_master_put(master);
|
|
pxa_ssp_free(ssp);
|
|
return status;
|
|
}
|
|
|
|
static int pxa2xx_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct driver_data *drv_data = platform_get_drvdata(pdev);
|
|
struct ssp_device *ssp;
|
|
|
|
if (!drv_data)
|
|
return 0;
|
|
ssp = drv_data->ssp;
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
/* Disable the SSP at the peripheral and SOC level */
|
|
pxa2xx_spi_write(drv_data, SSCR0, 0);
|
|
clk_disable_unprepare(ssp->clk);
|
|
|
|
/* Release DMA */
|
|
if (drv_data->master_info->enable_dma)
|
|
pxa2xx_spi_dma_release(drv_data);
|
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
/* Release IRQ */
|
|
free_irq(ssp->irq, drv_data);
|
|
|
|
/* Release SSP */
|
|
pxa_ssp_free(ssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa2xx_spi_shutdown(struct platform_device *pdev)
|
|
{
|
|
int status = 0;
|
|
|
|
if ((status = pxa2xx_spi_remove(pdev)) != 0)
|
|
dev_err(&pdev->dev, "shutdown failed with %d\n", status);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pxa2xx_spi_suspend(struct device *dev)
|
|
{
|
|
struct driver_data *drv_data = dev_get_drvdata(dev);
|
|
struct ssp_device *ssp = drv_data->ssp;
|
|
int status;
|
|
|
|
status = spi_master_suspend(drv_data->master);
|
|
if (status != 0)
|
|
return status;
|
|
pxa2xx_spi_write(drv_data, SSCR0, 0);
|
|
|
|
if (!pm_runtime_suspended(dev))
|
|
clk_disable_unprepare(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_spi_resume(struct device *dev)
|
|
{
|
|
struct driver_data *drv_data = dev_get_drvdata(dev);
|
|
struct ssp_device *ssp = drv_data->ssp;
|
|
int status;
|
|
|
|
/* Enable the SSP clock */
|
|
if (!pm_runtime_suspended(dev))
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
/* Restore LPSS private register bits */
|
|
if (is_lpss_ssp(drv_data))
|
|
lpss_ssp_setup(drv_data);
|
|
|
|
/* Start the queue running */
|
|
status = spi_master_resume(drv_data->master);
|
|
if (status != 0) {
|
|
dev_err(dev, "problem starting queue (%d)\n", status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pxa2xx_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct driver_data *drv_data = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(drv_data->ssp->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct driver_data *drv_data = dev_get_drvdata(dev);
|
|
|
|
clk_prepare_enable(drv_data->ssp->clk);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
|
|
SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend,
|
|
pxa2xx_spi_runtime_resume, NULL)
|
|
};
|
|
|
|
static struct platform_driver driver = {
|
|
.driver = {
|
|
.name = "pxa2xx-spi",
|
|
.pm = &pxa2xx_spi_pm_ops,
|
|
.acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
|
|
},
|
|
.probe = pxa2xx_spi_probe,
|
|
.remove = pxa2xx_spi_remove,
|
|
.shutdown = pxa2xx_spi_shutdown,
|
|
};
|
|
|
|
static int __init pxa2xx_spi_init(void)
|
|
{
|
|
return platform_driver_register(&driver);
|
|
}
|
|
subsys_initcall(pxa2xx_spi_init);
|
|
|
|
static void __exit pxa2xx_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&driver);
|
|
}
|
|
module_exit(pxa2xx_spi_exit);
|