William Breathitt Gray 7d816e54b8 iio: stx104: Add support for GPIO names ...

This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Apex Embedded Systems
STX104. This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2017-01-31 18:54:04 +00:00

..

accel

iio: common: ssp_sensors: accel: use devm_iio_device_register()

2017-01-28 12:15:22 +00:00

adc

iio: stx104: Add support for GPIO names

2017-01-31 18:54:04 +00:00

amplifiers

spi: Updates for v4.4

2015-11-05 13:15:12 -08:00

buffer

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

chemical

iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value

2016-10-23 22:18:27 +01:00

common

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

2017-01-19 10:40:44 +01:00

counter

iio: 104-quad-8: Fix active level mismatch for the preset enable option

2016-12-03 10:08:09 +00:00

dac

iio: dac: ad5593r: Add ACPI support

2016-12-30 17:20:14 +00:00

dummy

iio:dummy: Stop enabling timestamp by default.

2017-01-10 19:54:55 +00:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio: common: ssp_sensors: gyro: use devm_iio_device_register()

2017-01-28 12:16:17 +00:00

health

iio: health: max30100: use msleep() for long uncritical delays

2017-01-22 13:21:28 +00:00

humidity

iio: humidity: Support acpi probe for hts211

2016-12-03 08:56:28 +00:00

imu

iio: imu: st_lsm6dsx: add possibility to select drdy pin

2017-01-28 12:41:53 +00:00

light

Second round of IIO new device support, cleanups and features for the 4.11 cycle

2017-01-23 09:23:23 +01:00

magnetometer

iio: magnetometer: mag3110: claim direct mode during raw writes

2017-01-21 12:20:40 +00:00

orientation

iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)

2016-11-05 17:47:47 +00:00

potentiometer

iio: max5481: Add support for Maxim digital potentiometers

2017-01-28 12:13:31 +00:00

potentiostat

iio: potentiostat: add LMP91000 support

2016-09-27 20:33:03 +01:00

pressure

iio: cros_ec: Add cros_ec barometer driver

2017-01-28 15:07:46 +00:00

proximity

iio: distance: srf08: add IIO driver for us ranger

2017-01-28 16:38:24 +00:00

temperature

iio: tmp007: Fix name attribute ABI

2017-01-30 20:38:13 +00:00

trigger

Immutable branch between MFD, IIO and PWM due for the v4.11 merge window

2017-01-28 18:21:49 +00:00

iio_core_trigger.h

…

iio_core.h

iio:core: timestamping clock selection support

2016-06-30 19:41:38 +01:00

industrialio-buffer.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-event.c

iio: iio_push_event(): Don't crash if the event interface is not registered

2016-09-10 16:40:44 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio: trigger: clean up viio_trigger_alloc()

2017-01-22 13:37:34 +00:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: inkern: pass through raw values if no scaling

2017-01-14 12:20:18 +00:00

Kconfig

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

Makefile

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00