iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7d910c054b
linux/mm
History
Michal Hocko 7d910c054b memcg: track children in soft limit excess to improve soft limit 
Soft limit reclaim has to check the whole reclaim hierarchy while doing
the first pass of the reclaim.  This leads to a higher system time which
can be visible especially when there are many groups in the hierarchy.

This patch adds a per-memcg counter of children in excess.  It also
restores MEM_CGROUP_TARGET_SOFTLIMIT into mem_cgroup_event_ratelimit for a
proper batching.

If a group crosses soft limit for the first time it increases parent's
children_in_excess up the hierarchy.  The similarly if a group gets below
the limit it will decrease the counter.  The transition phase is recorded
in soft_contributed flag.

mem_cgroup_soft_reclaim_eligible then uses this information to better
decide whether to skip the node or the whole subtree.  The rule is simple.
 Skip the node with a children in excess or skip the whole subtree
otherwise.

This has been tested by a stream IO (dd if=/dev/zero of=file with
4*MemTotal size) which is quite sensitive to overhead during reclaim.  The
load is running in a group with soft limit set to 0 and without any limit.
 Apart from that there was a hierarchy with ~500, 2k and 8k groups (two
groups on each level) without any pages in them.  base denotes to the
kernel on which the whole series is based on, rework is the kernel before
this patch and reworkoptim is with this patch applied:

* Run with soft limit set to 0
Elapsed
0-0-limit/base: min: 88.21 max: 94.61 avg: 91.73 std: 2.65 runs: 3
0-0-limit/rework: min: 76.05 [86.2%] max: 79.08 [83.6%] avg: 77.84 [84.9%] std: 1.30 runs: 3
0-0-limit/reworkoptim: min: 77.98 [88.4%] max: 80.36 [84.9%] avg: 78.92 [86.0%] std: 1.03 runs: 3
System
0.5k-0-limit/base: min: 34.86 max: 36.42 avg: 35.89 std: 0.73 runs: 3
0.5k-0-limit/rework: min: 43.26 [124.1%] max: 48.95 [134.4%] avg: 46.09 [128.4%] std: 2.32 runs: 3
0.5k-0-limit/reworkoptim: min: 46.98 [134.8%] max: 50.98 [140.0%] avg: 48.49 [135.1%] std: 1.77 runs: 3
Elapsed
0.5k-0-limit/base: min: 88.50 max: 97.52 avg: 93.92 std: 3.90 runs: 3
0.5k-0-limit/rework: min: 75.92 [85.8%] max: 78.45 [80.4%] avg: 77.34 [82.3%] std: 1.06 runs: 3
0.5k-0-limit/reworkoptim: min: 75.79 [85.6%] max: 79.37 [81.4%] avg: 77.55 [82.6%] std: 1.46 runs: 3
System
2k-0-limit/base: min: 34.57 max: 37.65 avg: 36.34 std: 1.30 runs: 3
2k-0-limit/rework: min: 64.17 [185.6%] max: 68.20 [181.1%] avg: 66.21 [182.2%] std: 1.65 runs: 3
2k-0-limit/reworkoptim: min: 49.78 [144.0%] max: 52.99 [140.7%] avg: 51.00 [140.3%] std: 1.42 runs: 3
Elapsed
2k-0-limit/base: min: 92.61 max: 97.83 avg: 95.03 std: 2.15 runs: 3
2k-0-limit/rework: min: 78.33 [84.6%] max: 84.08 [85.9%] avg: 81.09 [85.3%] std: 2.35 runs: 3
2k-0-limit/reworkoptim: min: 75.72 [81.8%] max: 78.57 [80.3%] avg: 76.73 [80.7%] std: 1.30 runs: 3
System
8k-0-limit/base: min: 39.78 max: 42.09 avg: 41.09 std: 0.97 runs: 3
8k-0-limit/rework: min: 200.86 [504.9%] max: 265.42 [630.6%] avg: 241.80 [588.5%] std: 29.06 runs: 3
8k-0-limit/reworkoptim: min: 53.70 [135.0%] max: 54.89 [130.4%] avg: 54.43 [132.5%] std: 0.52 runs: 3
Elapsed
8k-0-limit/base: min: 95.11 max: 98.61 avg: 96.81 std: 1.43 runs: 3
8k-0-limit/rework: min: 246.96 [259.7%] max: 331.47 [336.1%] avg: 301.32 [311.2%] std: 38.52 runs: 3
8k-0-limit/reworkoptim: min: 76.79 [80.7%] max: 81.71 [82.9%] avg: 78.97 [81.6%] std: 2.05 runs: 3

System time is increased by 30-40% but it is reduced a lot comparing to
kernel without this patch.  The higher time can be explained by the fact
that the original soft reclaim scanned at priority 0 so it was much more
effective for this workload (which is basically touch once and writeback).
 The Elapsed time looks better though (~20%).

* Run with no soft limit set
System
0-no-limit/base: min: 42.18 max: 50.38 avg: 46.44 std: 3.36 runs: 3
0-no-limit/rework: min: 40.57 [96.2%] max: 47.04 [93.4%] avg: 43.82 [94.4%] std: 2.64 runs: 3
0-no-limit/reworkoptim: min: 40.45 [95.9%] max: 45.28 [89.9%] avg: 42.10 [90.7%] std: 2.25 runs: 3
Elapsed
0-no-limit/base: min: 75.97 max: 78.21 avg: 76.87 std: 0.96 runs: 3
0-no-limit/rework: min: 75.59 [99.5%] max: 80.73 [103.2%] avg: 77.64 [101.0%] std: 2.23 runs: 3
0-no-limit/reworkoptim: min: 77.85 [102.5%] max: 82.42 [105.4%] avg: 79.64 [103.6%] std: 1.99 runs: 3
System
0.5k-no-limit/base: min: 44.54 max: 46.93 avg: 46.12 std: 1.12 runs: 3
0.5k-no-limit/rework: min: 42.09 [94.5%] max: 46.16 [98.4%] avg: 43.92 [95.2%] std: 1.69 runs: 3
0.5k-no-limit/reworkoptim: min: 42.47 [95.4%] max: 45.67 [97.3%] avg: 44.06 [95.5%] std: 1.31 runs: 3
Elapsed
0.5k-no-limit/base: min: 78.26 max: 81.49 avg: 79.65 std: 1.36 runs: 3
0.5k-no-limit/rework: min: 77.01 [98.4%] max: 80.43 [98.7%] avg: 78.30 [98.3%] std: 1.52 runs: 3
0.5k-no-limit/reworkoptim: min: 76.13 [97.3%] max: 77.87 [95.6%] avg: 77.18 [96.9%] std: 0.75 runs: 3
System
2k-no-limit/base: min: 62.96 max: 69.14 avg: 66.14 std: 2.53 runs: 3
2k-no-limit/rework: min: 76.01 [120.7%] max: 81.06 [117.2%] avg: 78.17 [118.2%] std: 2.12 runs: 3
2k-no-limit/reworkoptim: min: 62.57 [99.4%] max: 66.10 [95.6%] avg: 64.53 [97.6%] std: 1.47 runs: 3
Elapsed
2k-no-limit/base: min: 76.47 max: 84.22 avg: 79.12 std: 3.60 runs: 3
2k-no-limit/rework: min: 89.67 [117.3%] max: 93.26 [110.7%] avg: 91.10 [115.1%] std: 1.55 runs: 3
2k-no-limit/reworkoptim: min: 76.94 [100.6%] max: 79.21 [94.1%] avg: 78.45 [99.2%] std: 1.07 runs: 3
System
8k-no-limit/base: min: 104.74 max: 151.34 avg: 129.21 std: 19.10 runs: 3
8k-no-limit/rework: min: 205.23 [195.9%] max: 285.94 [188.9%] avg: 258.98 [200.4%] std: 38.01 runs: 3
8k-no-limit/reworkoptim: min: 161.16 [153.9%] max: 184.54 [121.9%] avg: 174.52 [135.1%] std: 9.83 runs: 3
Elapsed
8k-no-limit/base: min: 125.43 max: 181.00 avg: 154.81 std: 22.80 runs: 3
8k-no-limit/rework: min: 254.05 [202.5%] max: 355.67 [196.5%] avg: 321.46 [207.6%] std: 47.67 runs: 3
8k-no-limit/reworkoptim: min: 193.77 [154.5%] max: 222.72 [123.0%] avg: 210.18 [135.8%] std: 12.13 runs: 3

Both System and Elapsed are in stdev with the base kernel for all
configurations except for 8k where both System and Elapsed are up by 35%.
I do not have a good explanation for this because there is no soft reclaim
pass going on as no group is above the limit which is checked in
mem_cgroup_should_soft_reclaim.

Then I have tested kernel build with the same configuration to see the
behavior with a more general behavior.

* Soft limit set to 0 for the build
System
0-0-limit/base: min: 242.70 max: 245.17 avg: 243.85 std: 1.02 runs: 3
0-0-limit/rework min: 237.86 [98.0%] max: 240.22 [98.0%] avg: 239.00 [98.0%] std: 0.97 runs: 3
0-0-limit/reworkoptim: min: 241.11 [99.3%] max: 243.53 [99.3%] avg: 242.01 [99.2%] std: 1.08 runs: 3
Elapsed
0-0-limit/base: min: 348.48 max: 360.86 avg: 356.04 std: 5.41 runs: 3
0-0-limit/rework min: 286.95 [82.3%] max: 290.26 [80.4%] avg: 288.27 [81.0%] std: 1.43 runs: 3
0-0-limit/reworkoptim: min: 286.55 [82.2%] max: 289.00 [80.1%] avg: 287.69 [80.8%] std: 1.01 runs: 3
System
0.5k-0-limit/base: min: 251.77 max: 254.41 avg: 252.70 std: 1.21 runs: 3
0.5k-0-limit/rework min: 286.44 [113.8%] max: 289.30 [113.7%] avg: 287.60 [113.8%] std: 1.23 runs: 3
0.5k-0-limit/reworkoptim: min: 252.18 [100.2%] max: 253.16 [99.5%] avg: 252.62 [100.0%] std: 0.41 runs: 3
Elapsed
0.5k-0-limit/base: min: 347.83 max: 353.06 avg: 350.04 std: 2.21 runs: 3
0.5k-0-limit/rework min: 290.19 [83.4%] max: 295.62 [83.7%] avg: 293.12 [83.7%] std: 2.24 runs: 3
0.5k-0-limit/reworkoptim: min: 293.91 [84.5%] max: 294.87 [83.5%] avg: 294.29 [84.1%] std: 0.42 runs: 3
System
2k-0-limit/base: min: 263.05 max: 271.52 avg: 267.94 std: 3.58 runs: 3
2k-0-limit/rework min: 458.99 [174.5%] max: 468.31 [172.5%] avg: 464.45 [173.3%] std: 3.97 runs: 3
2k-0-limit/reworkoptim: min: 267.10 [101.5%] max: 279.38 [102.9%] avg: 272.78 [101.8%] std: 5.05 runs: 3
Elapsed
2k-0-limit/base: min: 372.33 max: 379.32 avg: 375.47 std: 2.90 runs: 3
2k-0-limit/rework min: 334.40 [89.8%] max: 339.52 [89.5%] avg: 337.44 [89.9%] std: 2.20 runs: 3
2k-0-limit/reworkoptim: min: 301.47 [81.0%] max: 319.19 [84.1%] avg: 307.90 [82.0%] std: 8.01 runs: 3
System
8k-0-limit/base: min: 320.50 max: 332.10 avg: 325.46 std: 4.88 runs: 3
8k-0-limit/rework min: 1115.76 [348.1%] max: 1165.66 [351.0%] avg: 1132.65 [348.0%] std: 23.34 runs: 3
8k-0-limit/reworkoptim: min: 403.75 [126.0%] max: 409.22 [123.2%] avg: 406.16 [124.8%] std: 2.28 runs: 3
Elapsed
8k-0-limit/base: min: 475.48 max: 585.19 avg: 525.54 std: 45.30 runs: 3
8k-0-limit/rework min: 616.25 [129.6%] max: 625.90 [107.0%] avg: 620.68 [118.1%] std: 3.98 runs: 3
8k-0-limit/reworkoptim: min: 420.18 [88.4%] max: 428.28 [73.2%] avg: 423.05 [80.5%] std: 3.71 runs: 3

Apart from 8k the system time is comparable with the base kernel while
Elapsed is up to 20% better with all configurations.

* No soft limit set
System
0-no-limit/base: min: 234.76 max: 237.42 avg: 236.25 std: 1.11 runs: 3
0-no-limit/rework min: 233.09 [99.3%] max: 238.65 [100.5%] avg: 236.09 [99.9%] std: 2.29 runs: 3
0-no-limit/reworkoptim: min: 236.12 [100.6%] max: 240.53 [101.3%] avg: 237.94 [100.7%] std: 1.88 runs: 3
Elapsed
0-no-limit/base: min: 288.52 max: 295.42 avg: 291.29 std: 2.98 runs: 3
0-no-limit/rework min: 283.17 [98.1%] max: 284.33 [96.2%] avg: 283.78 [97.4%] std: 0.48 runs: 3
0-no-limit/reworkoptim: min: 288.50 [100.0%] max: 290.79 [98.4%] avg: 289.78 [99.5%] std: 0.95 runs: 3
System
0.5k-no-limit/base: min: 286.51 max: 293.23 avg: 290.21 std: 2.78 runs: 3
0.5k-no-limit/rework min: 291.69 [101.8%] max: 294.38 [100.4%] avg: 292.97 [101.0%] std: 1.10 runs: 3
0.5k-no-limit/reworkoptim: min: 277.05 [96.7%] max: 288.76 [98.5%] avg: 284.17 [97.9%] std: 5.11 runs: 3
Elapsed
0.5k-no-limit/base: min: 294.94 max: 298.92 avg: 296.47 std: 1.75 runs: 3
0.5k-no-limit/rework min: 292.55 [99.2%] max: 294.21 [98.4%] avg: 293.55 [99.0%] std: 0.72 runs: 3
0.5k-no-limit/reworkoptim: min: 294.41 [99.8%] max: 301.67 [100.9%] avg: 297.78 [100.4%] std: 2.99 runs: 3
System
2k-no-limit/base: min: 443.41 max: 466.66 avg: 457.66 std: 10.19 runs: 3
2k-no-limit/rework min: 490.11 [110.5%] max: 516.02 [110.6%] avg: 501.42 [109.6%] std: 10.83 runs: 3
2k-no-limit/reworkoptim: min: 435.25 [98.2%] max: 458.11 [98.2%] avg: 446.73 [97.6%] std: 9.33 runs: 3
Elapsed
2k-no-limit/base: min: 330.85 max: 333.75 avg: 332.52 std: 1.23 runs: 3
2k-no-limit/rework min: 343.06 [103.7%] max: 349.59 [104.7%] avg: 345.95 [104.0%] std: 2.72 runs: 3
2k-no-limit/reworkoptim: min: 330.01 [99.7%] max: 333.92 [100.1%] avg: 332.22 [99.9%] std: 1.64 runs: 3
System
8k-no-limit/base: min: 1175.64 max: 1259.38 avg: 1222.39 std: 34.88 runs: 3
8k-no-limit/rework min: 1226.31 [104.3%] max: 1241.60 [98.6%] avg: 1233.74 [100.9%] std: 6.25 runs: 3
8k-no-limit/reworkoptim: min: 1023.45 [87.1%] max: 1056.74 [83.9%] avg: 1038.92 [85.0%] std: 13.69 runs: 3
Elapsed
8k-no-limit/base: min: 613.36 max: 619.60 avg: 616.47 std: 2.55 runs: 3
8k-no-limit/rework min: 627.56 [102.3%] max: 642.33 [103.7%] avg: 633.44 [102.8%] std: 6.39 runs: 3
8k-no-limit/reworkoptim: min: 545.89 [89.0%] max: 555.36 [89.6%] avg: 552.06 [89.6%] std: 4.37 runs: 3

and these numbers look good as well.  System time is around 100%
(suprisingly better for the 8k case) and Elapsed is copies that trend.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:00 -07:00
..
backing-dev.c mm/backing-dev.c: check user buffer length before copying data to the related user buffer 2013-09-11 15:58:03 -07:00
balloon_compaction.c mm: introduce a common interface for balloon pages mobility 2012-12-11 17:22:26 -08:00
bootmem.c mm: kill free_all_bootmem_node() 2013-07-03 16:07:39 -07:00
bounce.c Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-block 2013-05-08 10:13:35 -07:00
cleancache.c mm: cleancache: clean up cleancache_enabled 2013-04-30 17:04:01 -07:00
compaction.c mm: compaction: do not compact pgdat for order-0 2013-09-11 15:57:55 -07:00
debug-pagealloc.c
dmapool.c dmapool: make DMAPOOL_DEBUG detect corruption of free marker 2012-12-11 17:22:24 -08:00
fadvise.c teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long 2013-03-03 22:46:22 -05:00
failslab.c
filemap_xip.c lift sb_start_write() out of ->write() 2013-04-09 14:12:56 -04:00
filemap.c lib/radix-tree.c: make radix_tree_node_alloc() work correctly within interrupt 2013-09-11 15:59:36 -07:00
fremap.c mm: save soft-dirty bits on file pages 2013-08-13 17:57:48 -07:00
frontswap.c frontswap: fix incorrect zeroing and allocation size for frontswap_map 2013-06-12 16:29:46 -07:00
highmem.c Some nice cleanups, and even a patch my wife did as a "live" demo for 2012-12-20 08:37:05 -08:00
huge_memory.c mm/huge_memory.c: fix potential NULL pointer dereference 2013-09-11 15:57:19 -07:00
hugetlb_cgroup.c cgroup: pass around cgroup_subsys_state instead of cgroup in file methods 2013-08-08 20:11:24 -04:00
hugetlb.c mm: prepare to remove /proc/sys/vm/hugepages_treat_as_movable 2013-09-11 15:57:49 -07:00
hwpoison-inject.c mm/hwpoison-inject.c: change permission of corrupt-pfn/unpoison-pfn to 0200 2013-09-11 15:58:11 -07:00
init-mm.c
internal.h mm: vmscan: fix do_try_to_free_pages() livelock 2013-09-11 15:58:01 -07:00
interval_tree.c
Kconfig Merge remote-tracking branch 'origin/next' into kvm-ppc-next 2013-08-29 00:41:59 +02:00
Kconfig.debug
kmemcheck.c
kmemleak-test.c
kmemleak.c mm: replace strict_strtoul() with kstrtoul() 2013-09-11 15:57:11 -07:00
ksm.c mm: replace strict_strtoul() with kstrtoul() 2013-09-11 15:57:11 -07:00
maccess.c
madvise.c mm/madvise.c:madvise_hwpoison(): remove local `ret' 2013-09-11 15:58:13 -07:00
Makefile zswap: add to mm/ 2013-07-10 18:11:34 -07:00
memblock.c memblock, numa: binary search node id 2013-09-11 15:57:51 -07:00
memcontrol.c memcg: track children in soft limit excess to improve soft limit 2013-09-12 15:38:00 -07:00
memory_hotplug.c mm: memory-hotplug: enable memory hotplug to handle hugepage 2013-09-11 15:57:48 -07:00
memory-failure.c mm/memory-failure.c: fix bug triggered by unpoisoning empty zero page 2013-09-11 15:58:12 -07:00
memory.c mm: migrate: add hugepage migration code to move_pages() 2013-09-11 15:57:48 -07:00
mempolicy.c mbind: add BUG_ON(!vma) in new_vma_page() 2013-09-11 15:57:50 -07:00
mempool.c mm/mempool.c: convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) 2013-09-11 15:58:14 -07:00
migrate.c mm: vmscan: fix do_try_to_free_pages() livelock 2013-09-11 15:58:01 -07:00
mincore.c swap: make each swap partition have one address_space 2013-02-23 17:50:17 -08:00
mlock.c mm: munlock: manual pte walk in fast path instead of follow_page_mask() 2013-09-11 15:58:01 -07:00
mm_init.c mm: tune vm_committed_as percpu_counter batching size 2013-07-03 16:07:32 -07:00
mmap.c mm/mmap: remove unnecessary assignment 2013-09-11 15:58:13 -07:00
mmu_context.c mm: remove old aio use_mm() comment 2013-05-07 18:38:27 -07:00
mmu_notifier.c treewide: relase -> release 2013-06-28 14:34:33 +02:00
mmzone.c mm: rename page struct field helpers 2013-02-23 17:50:18 -08:00
mprotect.c mm/mprotect.c: coding-style cleanups 2012-12-18 15:02:15 -08:00
mremap.c mm/mremap.c: call pud_free() after fail calling pmd_alloc() 2013-09-11 15:58:03 -07:00
msync.c
nobootmem.c mm: concentrate modification of totalram_pages into the mm core 2013-07-03 16:07:33 -07:00
nommu.c mm: remove free_area_cache 2013-07-10 18:11:34 -07:00
oom_kill.c mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). 2013-07-15 11:25:05 +09:30
page_alloc.c mm: correct the comment about the value for buddy _mapcount 2013-09-11 15:58:06 -07:00
page_cgroup.c memcontrol: use N_MEMORY instead N_HIGH_MEMORY 2012-12-12 17:38:32 -08:00
page_io.c mm: remove compressed copy from zram in-memory 2013-07-03 16:07:26 -07:00
page_isolation.c mm: memory-hotplug: enable memory hotplug to handle hugepage 2013-09-11 15:57:48 -07:00
page-writeback.c mm/page-writeback.c: add strictlimit feature 2013-09-11 15:58:04 -07:00
pagewalk.c mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas 2013-05-24 16:22:53 -07:00
percpu-km.c
percpu-vm.c
percpu.c mm, percpu: Make sure percpu_alloc early parameter has an argument 2012-12-02 06:23:04 -08:00
pgtable-generic.c mm: move pgtable related functions to right place 2013-09-11 15:57:30 -07:00
process_vm_access.c Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys 2013-03-12 11:05:45 -07:00
quicklist.c
readahead.c readahead: make context readahead more conservative 2013-09-11 15:57:39 -07:00
rmap.c s390/mm: implement software referenced bits 2013-08-29 13:20:11 +02:00
shmem.c initmpfs: make rootfs use tmpfs when CONFIG_TMPFS enabled 2013-09-11 15:59:37 -07:00
slab_common.c Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux 2013-07-14 15:14:29 -07:00
slab.c kernel: delete __cpuinit usage from all core kernel files 2013-07-14 19:36:59 -04:00
slab.h memcg: check that kmem_cache has memcg_params before accessing it 2013-08-28 19:26:38 -07:00
slob.c Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux 2013-07-14 15:14:29 -07:00
slub.c mm: replace strict_strtoul() with kstrtoul() 2013-09-11 15:57:11 -07:00
sparse-vmemmap.c sparse-vmemmap: specify vmemmap population range in bytes 2013-04-29 15:54:35 -07:00
sparse.c mm/sparse: introduce alloc_usemap_and_memmap 2013-09-11 15:58:01 -07:00
swap_state.c lib/radix-tree.c: make radix_tree_node_alloc() work correctly within interrupt 2013-09-11 15:59:36 -07:00
swap.c mm: fix aio performance regression for database caused by THP 2013-09-11 15:57:55 -07:00
swapfile.c swap: make cluster allocation per-cpu 2013-09-11 15:57:17 -07:00
truncate.c mm: teach truncate_inode_pages_range() to handle non page aligned ranges 2013-05-27 23:32:35 -04:00
util.c swap: clean-up #ifdef in page_mapping() 2013-09-11 15:57:31 -07:00
vmalloc.c mm/vmalloc: use wrapper function get_vm_area_size to caculate size of vm area 2013-09-11 15:58:02 -07:00
vmpressure.c Merge branch 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 2013-09-03 18:25:03 -07:00
vmscan.c memcg: enhance memcg iterator to support predicates 2013-09-12 15:38:00 -07:00
vmstat.c mm: vmscan: fix do_try_to_free_pages() livelock 2013-09-11 15:58:01 -07:00
zbud.c mm/zbud: fix some trivial typos in comments 2013-09-11 15:57:35 -07:00
zswap.c mm/zswap: use postorder iteration when destroying rbtree 2013-09-11 15:59:21 -07:00