0177212e27
Merge series from Mika Westerberg <mika.westerberg@linux.intel.com>: Based on discussion on the patch I sent some time ago here: http://lists.infradead.org/pipermail/linux-mtd/2021-June/086867.html it turns out that the preferred way to deal with the SPI flash controller drivers is through SPI MEM which is part of Linux SPI subsystem. This series does that for the intel-spi driver. This also renames the driver to follow the convention used in the SPI subsystem. The first patch improves the write protection handling to be slightly more safer. The following two patches do the conversion itself. Note the Intel SPI flash controller only allows commands such as read, write and so on and it internally uses whatever addressing etc. it figured from the SFDP on the flash device. base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07
147 lines
6.3 KiB
Makefile
147 lines
6.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for kernel SPI drivers.
|
|
#
|
|
|
|
ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
|
|
|
|
# small core, mostly translating board-specific
|
|
# config declarations into driver model code
|
|
obj-$(CONFIG_SPI_MASTER) += spi.o
|
|
obj-$(CONFIG_SPI_MEM) += spi-mem.o
|
|
obj-$(CONFIG_SPI_MUX) += spi-mux.o
|
|
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
|
obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o
|
|
|
|
# SPI master controller drivers (bus)
|
|
obj-$(CONFIG_SPI_ALTERA) += spi-altera-platform.o
|
|
obj-$(CONFIG_SPI_ALTERA_CORE) += spi-altera-core.o
|
|
obj-$(CONFIG_SPI_ALTERA_DFL) += spi-altera-dfl.o
|
|
obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o
|
|
obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o
|
|
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
|
|
obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o
|
|
obj-$(CONFIG_SPI_AT91_USART) += spi-at91-usart.o
|
|
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
|
|
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
|
|
obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o
|
|
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
|
|
obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o
|
|
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
|
|
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
|
|
obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
|
|
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
|
|
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
|
|
obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
|
|
obj-$(CONFIG_SPI_CADENCE_QUADSPI) += spi-cadence-quadspi.o
|
|
obj-$(CONFIG_SPI_CADENCE_XSPI) += spi-cadence-xspi.o
|
|
obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
|
|
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
|
|
obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
|
|
obj-$(CONFIG_SPI_DLN2) += spi-dln2.o
|
|
obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
|
|
spi-dw-y := spi-dw-core.o
|
|
spi-dw-$(CONFIG_SPI_DW_DMA) += spi-dw-dma.o
|
|
obj-$(CONFIG_SPI_DW_BT1) += spi-dw-bt1.o
|
|
obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
|
|
obj-$(CONFIG_SPI_DW_PCI) += spi-dw-pci.o
|
|
obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
|
|
obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
|
|
obj-$(CONFIG_SPI_FSI) += spi-fsi.o
|
|
obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o
|
|
obj-$(CONFIG_SPI_FSL_DSPI) += spi-fsl-dspi.o
|
|
obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
|
|
obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
|
|
obj-$(CONFIG_SPI_FSL_LPSPI) += spi-fsl-lpspi.o
|
|
obj-$(CONFIG_SPI_FSL_QUADSPI) += spi-fsl-qspi.o
|
|
obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
|
|
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
|
|
obj-$(CONFIG_SPI_HISI_KUNPENG) += spi-hisi-kunpeng.o
|
|
obj-$(CONFIG_SPI_HISI_SFC_V3XX) += spi-hisi-sfc-v3xx.o
|
|
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
|
|
obj-$(CONFIG_SPI_IMX) += spi-imx.o
|
|
obj-$(CONFIG_SPI_INGENIC) += spi-ingenic.o
|
|
obj-$(CONFIG_SPI_INTEL) += spi-intel.o
|
|
obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o
|
|
obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o
|
|
obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
|
|
obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
|
|
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
|
|
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
|
|
obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o
|
|
obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
|
|
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
|
|
obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
|
|
obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
|
|
obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o
|
|
obj-$(CONFIG_SPI_MXIC) += spi-mxic.o
|
|
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
|
|
obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o
|
|
obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o
|
|
obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o
|
|
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
|
spi-octeon-objs := spi-cavium.o spi-cavium-octeon.o
|
|
obj-$(CONFIG_SPI_OCTEON) += spi-octeon.o
|
|
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
|
|
obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o
|
|
obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o
|
|
obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o
|
|
obj-$(CONFIG_SPI_ORION) += spi-orion.o
|
|
obj-$(CONFIG_SPI_PIC32) += spi-pic32.o
|
|
obj-$(CONFIG_SPI_PIC32_SQI) += spi-pic32-sqi.o
|
|
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
|
|
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
|
|
spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
|
|
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
|
|
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
|
|
obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
|
|
obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
|
|
obj-$(CONFIG_SPI_QUP) += spi-qup.o
|
|
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
|
|
obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
|
|
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
|
|
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
|
|
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
|
|
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
|
|
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
|
|
spi-s3c24xx-hw-y := spi-s3c24xx.o
|
|
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
|
|
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
|
|
obj-$(CONFIG_SPI_SH) += spi-sh.o
|
|
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
|
|
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
|
|
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
|
|
obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
|
|
obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o
|
|
obj-$(CONFIG_SPI_SPRD) += spi-sprd.o
|
|
obj-$(CONFIG_SPI_SPRD_ADI) += spi-sprd-adi.o
|
|
obj-$(CONFIG_SPI_STM32) += spi-stm32.o
|
|
obj-$(CONFIG_SPI_STM32_QSPI) += spi-stm32-qspi.o
|
|
obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
|
|
obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
|
|
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
|
|
obj-$(CONFIG_SPI_SUNPLUS_SP7021) += spi-sunplus-sp7021.o
|
|
obj-$(CONFIG_SPI_SYNQUACER) += spi-synquacer.o
|
|
obj-$(CONFIG_SPI_TEGRA210_QUAD) += spi-tegra210-quad.o
|
|
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
|
|
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
|
|
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
|
|
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
|
|
spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
|
|
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
|
|
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
|
|
obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
|
|
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
|
|
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
|
|
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
|
|
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
|
|
obj-$(CONFIG_SPI_ZYNQ_QSPI) += spi-zynq-qspi.o
|
|
obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
|
|
obj-$(CONFIG_SPI_AMD) += spi-amd.o
|
|
|
|
# SPI slave protocol handlers
|
|
obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o
|
|
obj-$(CONFIG_SPI_SLAVE_SYSTEM_CONTROL) += spi-slave-system-control.o
|