80c6463e2f
power_supply_register() calls device_init_wakeup() to register a wakeup source before initializing dev_name. As a result, device_wakeup_enable() end up registering wakeup source with a null name when wakeup_source_register() gets called with dev_name(dev) which is null at the time. When kernel is booted with wakeup_source_activate enabled, it will panic when the trace point code tries to dereference ws->name. Fixed the problem by moving up the kobject_set_name() call prior to accesses to dev_name(). Replaced kobject_set_name() with dev_set_name() which is the right interface to be called from drivers. Fixed the call to device_del() prior to device_add() in for wakeup_init_failed error handling code. Trace after the change: bash-2143 [003] d... 132.280697: wakeup_source_activate: BAT1 state=0x20001 kworker/3:2-1169 [003] d... 132.281305: wakeup_source_deactivate: BAT1 state=0x30000 Oops message: [ 819.769934] device: 'BAT1': device_add [ 819.770078] PM: Adding info for No Bus:BAT1 [ 819.770235] BUG: unable to handle kernel NULL pointer dereference at (null) [ 819.770435] IP: [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.770572] PGD 3efd90067 PUD 3eff61067 PMD 0 [ 819.770716] Oops: 0000 [#1] SMP [ 819.770829] Modules linked in: arc4 iwldvm mac80211 x86_pkg_temp_thermal coretemp kvm_intel joydev i915 kvm uvcvideo ghash_clmulni_intel videobuf2_vmalloc aesni_intel videobuf2_memops videobuf2_core aes_x86_64 ablk_helper cryptd videodev iwlwifi lrw rfcomm gf128mul glue_helper bnep btusb media bluetooth parport_pc hid_generic ppdev snd_hda_codec_hdmi drm_kms_helper snd_hda_codec_realtek cfg80211 drm tpm_infineon samsung_laptop snd_hda_intel usbhid snd_hda_codec hid snd_hwdep snd_pcm microcode snd_page_alloc snd_timer psmouse i2c_algo_bit lpc_ich tpm_tis video wmi mac_hid serio_raw ext2 lp parport r8169 mii [ 819.771802] CPU: 0 PID: 2167 Comm: bash Not tainted 3.12.0+ #25 [ 819.771876] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D/SAMSUNG_NP1234567890, BIOS P03AAC 07/12/2012 [ 819.772022] task: ffff88002e6ddcc0 ti: ffff8804015ca000 task.ti: ffff8804015ca000 [ 819.772119] RIP: 0010:[<ffffffff813381c0>] [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.772242] RSP: 0018:ffff8804015cbc70 EFLAGS: 00010046 [ 819.772310] RAX: 0000000000000003 RBX: ffff88040cfd6d40 RCX: 0000000000000018 [ 819.772397] RDX: 0000000000020001 RSI: 0000000000000000 RDI: 0000000000000000 [ 819.772484] RBP: ffff8804015cbcc0 R08: 0000000000000000 R09: ffff8803f0768d40 [ 819.772570] R10: ffffea001033b800 R11: 0000000000000000 R12: ffffffff81c519c0 [ 819.772656] R13: 0000000000020001 R14: 0000000000000000 R15: 0000000000020001 [ 819.772744] FS: 00007ff98309b740(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 [ 819.772845] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 819.772917] CR2: 0000000000000000 CR3: 00000003f59dc000 CR4: 00000000001407f0 [ 819.773001] Stack: [ 819.773030] ffffffff81114003 ffff8804015cbcb0 0000000000000000 0000000000000046 [ 819.773146] ffff880409757a18 ffff8803f065a160 0000000000000000 0000000000020001 [ 819.773273] 0000000000000000 0000000000000000 ffff8804015cbce8 ffffffff8143e388 [ 819.773387] Call Trace: [ 819.773434] [<ffffffff81114003>] ? ftrace_raw_event_wakeup_source+0x43/0xe0 [ 819.773520] [<ffffffff8143e388>] wakeup_source_report_event+0xb8/0xd0 [ 819.773595] [<ffffffff8143e3cd>] __pm_stay_awake+0x2d/0x50 [ 819.773724] [<ffffffff8153395c>] power_supply_changed+0x3c/0x90 [ 819.773795] [<ffffffff8153407c>] power_supply_register+0x18c/0x250 [ 819.773869] [<ffffffff813d8d18>] sysfs_add_battery+0x61/0x7b [ 819.773935] [<ffffffff813d8d69>] battery_notify+0x37/0x3f [ 819.774001] [<ffffffff816ccb7c>] notifier_call_chain+0x4c/0x70 [ 819.774071] [<ffffffff81073ded>] __blocking_notifier_call_chain+0x4d/0x70 [ 819.774149] [<ffffffff81073e26>] blocking_notifier_call_chain+0x16/0x20 [ 819.774227] [<ffffffff8109397a>] pm_notifier_call_chain+0x1a/0x40 [ 819.774316] [<ffffffff81095b66>] hibernate+0x66/0x1c0 [ 819.774407] [<ffffffff81093931>] state_store+0x71/0xa0 [ 819.774507] [<ffffffff81331d8f>] kobj_attr_store+0xf/0x20 [ 819.774613] [<ffffffff811f8618>] sysfs_write_file+0x128/0x1c0 [ 819.774735] [<ffffffff8118579d>] vfs_write+0xbd/0x1e0 [ 819.774841] [<ffffffff811861d9>] SyS_write+0x49/0xa0 [ 819.774939] [<ffffffff816d1052>] system_call_fastpath+0x16/0x1b [ 819.775055] Code: 89 f8 48 89 e5 f6 82 c0 a6 84 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 a6 84 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80 [ 819.775760] RIP [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.775881] RSP <ffff8804015cbc70> [ 819.775949] CR2: 0000000000000000 [ 819.794175] ---[ end trace c4ef25127039952e ]--- Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Anton Vorontsov <anton@enomsg.org>
605 lines
14 KiB
C
605 lines
14 KiB
C
/*
|
|
* Universal power supply monitor class
|
|
*
|
|
* Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
|
|
* Copyright © 2004 Szabolcs Gyurko
|
|
* Copyright © 2003 Ian Molton <spyro@f2s.com>
|
|
*
|
|
* Modified: 2004, Oct Szabolcs Gyurko
|
|
*
|
|
* You may use this code as per GPL version 2
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/thermal.h>
|
|
#include "power_supply.h"
|
|
|
|
/* exported for the APM Power driver, APM emulation */
|
|
struct class *power_supply_class;
|
|
EXPORT_SYMBOL_GPL(power_supply_class);
|
|
|
|
static struct device_type power_supply_dev_type;
|
|
|
|
static bool __power_supply_is_supplied_by(struct power_supply *supplier,
|
|
struct power_supply *supply)
|
|
{
|
|
int i;
|
|
|
|
if (!supply->supplied_from && !supplier->supplied_to)
|
|
return false;
|
|
|
|
/* Support both supplied_to and supplied_from modes */
|
|
if (supply->supplied_from) {
|
|
if (!supplier->name)
|
|
return false;
|
|
for (i = 0; i < supply->num_supplies; i++)
|
|
if (!strcmp(supplier->name, supply->supplied_from[i]))
|
|
return true;
|
|
} else {
|
|
if (!supply->name)
|
|
return false;
|
|
for (i = 0; i < supplier->num_supplicants; i++)
|
|
if (!strcmp(supplier->supplied_to[i], supply->name))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int __power_supply_changed_work(struct device *dev, void *data)
|
|
{
|
|
struct power_supply *psy = (struct power_supply *)data;
|
|
struct power_supply *pst = dev_get_drvdata(dev);
|
|
|
|
if (__power_supply_is_supplied_by(psy, pst)) {
|
|
if (pst->external_power_changed)
|
|
pst->external_power_changed(pst);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void power_supply_changed_work(struct work_struct *work)
|
|
{
|
|
unsigned long flags;
|
|
struct power_supply *psy = container_of(work, struct power_supply,
|
|
changed_work);
|
|
|
|
dev_dbg(psy->dev, "%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&psy->changed_lock, flags);
|
|
if (psy->changed) {
|
|
psy->changed = false;
|
|
spin_unlock_irqrestore(&psy->changed_lock, flags);
|
|
class_for_each_device(power_supply_class, NULL, psy,
|
|
__power_supply_changed_work);
|
|
power_supply_update_leds(psy);
|
|
kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
|
|
spin_lock_irqsave(&psy->changed_lock, flags);
|
|
}
|
|
/*
|
|
* Dependent power supplies (e.g. battery) may have changed state
|
|
* as a result of this event, so poll again and hold the
|
|
* wakeup_source until all events are processed.
|
|
*/
|
|
if (!psy->changed)
|
|
pm_relax(psy->dev);
|
|
spin_unlock_irqrestore(&psy->changed_lock, flags);
|
|
}
|
|
|
|
void power_supply_changed(struct power_supply *psy)
|
|
{
|
|
unsigned long flags;
|
|
|
|
dev_dbg(psy->dev, "%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&psy->changed_lock, flags);
|
|
psy->changed = true;
|
|
pm_stay_awake(psy->dev);
|
|
spin_unlock_irqrestore(&psy->changed_lock, flags);
|
|
schedule_work(&psy->changed_work);
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_changed);
|
|
|
|
#ifdef CONFIG_OF
|
|
#include <linux/of.h>
|
|
|
|
static int __power_supply_populate_supplied_from(struct device *dev,
|
|
void *data)
|
|
{
|
|
struct power_supply *psy = (struct power_supply *)data;
|
|
struct power_supply *epsy = dev_get_drvdata(dev);
|
|
struct device_node *np;
|
|
int i = 0;
|
|
|
|
do {
|
|
np = of_parse_phandle(psy->of_node, "power-supplies", i++);
|
|
if (!np)
|
|
continue;
|
|
|
|
if (np == epsy->of_node) {
|
|
dev_info(psy->dev, "%s: Found supply : %s\n",
|
|
psy->name, epsy->name);
|
|
psy->supplied_from[i-1] = (char *)epsy->name;
|
|
psy->num_supplies++;
|
|
of_node_put(np);
|
|
break;
|
|
}
|
|
of_node_put(np);
|
|
} while (np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int power_supply_populate_supplied_from(struct power_supply *psy)
|
|
{
|
|
int error;
|
|
|
|
error = class_for_each_device(power_supply_class, NULL, psy,
|
|
__power_supply_populate_supplied_from);
|
|
|
|
dev_dbg(psy->dev, "%s %d\n", __func__, error);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int __power_supply_find_supply_from_node(struct device *dev,
|
|
void *data)
|
|
{
|
|
struct device_node *np = (struct device_node *)data;
|
|
struct power_supply *epsy = dev_get_drvdata(dev);
|
|
|
|
/* return error breaks out of class_for_each_device loop */
|
|
if (epsy->of_node == np)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int power_supply_find_supply_from_node(struct device_node *supply_node)
|
|
{
|
|
int error;
|
|
struct device *dev;
|
|
struct class_dev_iter iter;
|
|
|
|
/*
|
|
* Use iterator to see if any other device is registered.
|
|
* This is required since class_for_each_device returns 0
|
|
* if there are no devices registered.
|
|
*/
|
|
class_dev_iter_init(&iter, power_supply_class, NULL, NULL);
|
|
dev = class_dev_iter_next(&iter);
|
|
|
|
if (!dev)
|
|
return -EPROBE_DEFER;
|
|
|
|
/*
|
|
* We have to treat the return value as inverted, because if
|
|
* we return error on not found, then it won't continue looking.
|
|
* So we trick it by returning error on success to stop looking
|
|
* once the matching device is found.
|
|
*/
|
|
error = class_for_each_device(power_supply_class, NULL, supply_node,
|
|
__power_supply_find_supply_from_node);
|
|
|
|
return error ? 0 : -EPROBE_DEFER;
|
|
}
|
|
|
|
static int power_supply_check_supplies(struct power_supply *psy)
|
|
{
|
|
struct device_node *np;
|
|
int cnt = 0;
|
|
|
|
/* If there is already a list honor it */
|
|
if (psy->supplied_from && psy->num_supplies > 0)
|
|
return 0;
|
|
|
|
/* No device node found, nothing to do */
|
|
if (!psy->of_node)
|
|
return 0;
|
|
|
|
do {
|
|
int ret;
|
|
|
|
np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
|
|
if (!np)
|
|
continue;
|
|
|
|
ret = power_supply_find_supply_from_node(np);
|
|
if (ret) {
|
|
dev_dbg(psy->dev, "Failed to find supply, defer!\n");
|
|
of_node_put(np);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
of_node_put(np);
|
|
} while (np);
|
|
|
|
/* All supplies found, allocate char ** array for filling */
|
|
psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from),
|
|
GFP_KERNEL);
|
|
if (!psy->supplied_from) {
|
|
dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
*psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt,
|
|
GFP_KERNEL);
|
|
if (!*psy->supplied_from) {
|
|
dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return power_supply_populate_supplied_from(psy);
|
|
}
|
|
#else
|
|
static inline int power_supply_check_supplies(struct power_supply *psy)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __power_supply_am_i_supplied(struct device *dev, void *data)
|
|
{
|
|
union power_supply_propval ret = {0,};
|
|
struct power_supply *psy = (struct power_supply *)data;
|
|
struct power_supply *epsy = dev_get_drvdata(dev);
|
|
|
|
if (__power_supply_is_supplied_by(epsy, psy))
|
|
if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret)) {
|
|
if (ret.intval)
|
|
return ret.intval;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int power_supply_am_i_supplied(struct power_supply *psy)
|
|
{
|
|
int error;
|
|
|
|
error = class_for_each_device(power_supply_class, NULL, psy,
|
|
__power_supply_am_i_supplied);
|
|
|
|
dev_dbg(psy->dev, "%s %d\n", __func__, error);
|
|
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
|
|
|
|
static int __power_supply_is_system_supplied(struct device *dev, void *data)
|
|
{
|
|
union power_supply_propval ret = {0,};
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
unsigned int *count = data;
|
|
|
|
(*count)++;
|
|
if (psy->type != POWER_SUPPLY_TYPE_BATTERY) {
|
|
if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &ret))
|
|
return 0;
|
|
if (ret.intval)
|
|
return ret.intval;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int power_supply_is_system_supplied(void)
|
|
{
|
|
int error;
|
|
unsigned int count = 0;
|
|
|
|
error = class_for_each_device(power_supply_class, NULL, &count,
|
|
__power_supply_is_system_supplied);
|
|
|
|
/*
|
|
* If no power class device was found at all, most probably we are
|
|
* running on a desktop system, so assume we are on mains power.
|
|
*/
|
|
if (count == 0)
|
|
return 1;
|
|
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
|
|
|
|
int power_supply_set_battery_charged(struct power_supply *psy)
|
|
{
|
|
if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) {
|
|
psy->set_charged(psy);
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
|
|
|
|
static int power_supply_match_device_by_name(struct device *dev, const void *data)
|
|
{
|
|
const char *name = data;
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
|
|
return strcmp(psy->name, name) == 0;
|
|
}
|
|
|
|
struct power_supply *power_supply_get_by_name(const char *name)
|
|
{
|
|
struct device *dev = class_find_device(power_supply_class, NULL, name,
|
|
power_supply_match_device_by_name);
|
|
|
|
return dev ? dev_get_drvdata(dev) : NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_get_by_name);
|
|
|
|
int power_supply_powers(struct power_supply *psy, struct device *dev)
|
|
{
|
|
return sysfs_create_link(&psy->dev->kobj, &dev->kobj, "powers");
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_powers);
|
|
|
|
static void power_supply_dev_release(struct device *dev)
|
|
{
|
|
pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
|
|
kfree(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_THERMAL
|
|
static int power_supply_read_temp(struct thermal_zone_device *tzd,
|
|
unsigned long *temp)
|
|
{
|
|
struct power_supply *psy;
|
|
union power_supply_propval val;
|
|
int ret;
|
|
|
|
WARN_ON(tzd == NULL);
|
|
psy = tzd->devdata;
|
|
ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &val);
|
|
|
|
/* Convert tenths of degree Celsius to milli degree Celsius. */
|
|
if (!ret)
|
|
*temp = val.intval * 100;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct thermal_zone_device_ops psy_tzd_ops = {
|
|
.get_temp = power_supply_read_temp,
|
|
};
|
|
|
|
static int psy_register_thermal(struct power_supply *psy)
|
|
{
|
|
int i;
|
|
|
|
/* Register battery zone device psy reports temperature */
|
|
for (i = 0; i < psy->num_properties; i++) {
|
|
if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) {
|
|
psy->tzd = thermal_zone_device_register(psy->name, 0, 0,
|
|
psy, &psy_tzd_ops, NULL, 0, 0);
|
|
if (IS_ERR(psy->tzd))
|
|
return PTR_ERR(psy->tzd);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void psy_unregister_thermal(struct power_supply *psy)
|
|
{
|
|
if (IS_ERR_OR_NULL(psy->tzd))
|
|
return;
|
|
thermal_zone_device_unregister(psy->tzd);
|
|
}
|
|
|
|
/* thermal cooling device callbacks */
|
|
static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd,
|
|
unsigned long *state)
|
|
{
|
|
struct power_supply *psy;
|
|
union power_supply_propval val;
|
|
int ret;
|
|
|
|
psy = tcd->devdata;
|
|
ret = psy->get_property(psy,
|
|
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val);
|
|
if (!ret)
|
|
*state = val.intval;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ps_get_cur_chrage_cntl_limit(struct thermal_cooling_device *tcd,
|
|
unsigned long *state)
|
|
{
|
|
struct power_supply *psy;
|
|
union power_supply_propval val;
|
|
int ret;
|
|
|
|
psy = tcd->devdata;
|
|
ret = psy->get_property(psy,
|
|
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
|
|
if (!ret)
|
|
*state = val.intval;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ps_set_cur_charge_cntl_limit(struct thermal_cooling_device *tcd,
|
|
unsigned long state)
|
|
{
|
|
struct power_supply *psy;
|
|
union power_supply_propval val;
|
|
int ret;
|
|
|
|
psy = tcd->devdata;
|
|
val.intval = state;
|
|
ret = psy->set_property(psy,
|
|
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct thermal_cooling_device_ops psy_tcd_ops = {
|
|
.get_max_state = ps_get_max_charge_cntl_limit,
|
|
.get_cur_state = ps_get_cur_chrage_cntl_limit,
|
|
.set_cur_state = ps_set_cur_charge_cntl_limit,
|
|
};
|
|
|
|
static int psy_register_cooler(struct power_supply *psy)
|
|
{
|
|
int i;
|
|
|
|
/* Register for cooling device if psy can control charging */
|
|
for (i = 0; i < psy->num_properties; i++) {
|
|
if (psy->properties[i] ==
|
|
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT) {
|
|
psy->tcd = thermal_cooling_device_register(
|
|
(char *)psy->name,
|
|
psy, &psy_tcd_ops);
|
|
if (IS_ERR(psy->tcd))
|
|
return PTR_ERR(psy->tcd);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void psy_unregister_cooler(struct power_supply *psy)
|
|
{
|
|
if (IS_ERR_OR_NULL(psy->tcd))
|
|
return;
|
|
thermal_cooling_device_unregister(psy->tcd);
|
|
}
|
|
#else
|
|
static int psy_register_thermal(struct power_supply *psy)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void psy_unregister_thermal(struct power_supply *psy)
|
|
{
|
|
}
|
|
|
|
static int psy_register_cooler(struct power_supply *psy)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void psy_unregister_cooler(struct power_supply *psy)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
int power_supply_register(struct device *parent, struct power_supply *psy)
|
|
{
|
|
struct device *dev;
|
|
int rc;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
device_initialize(dev);
|
|
|
|
dev->class = power_supply_class;
|
|
dev->type = &power_supply_dev_type;
|
|
dev->parent = parent;
|
|
dev->release = power_supply_dev_release;
|
|
dev_set_drvdata(dev, psy);
|
|
psy->dev = dev;
|
|
|
|
rc = dev_set_name(dev, "%s", psy->name);
|
|
if (rc)
|
|
goto dev_set_name_failed;
|
|
|
|
INIT_WORK(&psy->changed_work, power_supply_changed_work);
|
|
|
|
rc = power_supply_check_supplies(psy);
|
|
if (rc) {
|
|
dev_info(dev, "Not all required supplies found, defer probe\n");
|
|
goto check_supplies_failed;
|
|
}
|
|
|
|
spin_lock_init(&psy->changed_lock);
|
|
rc = device_init_wakeup(dev, true);
|
|
if (rc)
|
|
goto wakeup_init_failed;
|
|
|
|
rc = device_add(dev);
|
|
if (rc)
|
|
goto device_add_failed;
|
|
|
|
rc = psy_register_thermal(psy);
|
|
if (rc)
|
|
goto register_thermal_failed;
|
|
|
|
rc = psy_register_cooler(psy);
|
|
if (rc)
|
|
goto register_cooler_failed;
|
|
|
|
rc = power_supply_create_triggers(psy);
|
|
if (rc)
|
|
goto create_triggers_failed;
|
|
|
|
power_supply_changed(psy);
|
|
|
|
goto success;
|
|
|
|
create_triggers_failed:
|
|
psy_unregister_cooler(psy);
|
|
register_cooler_failed:
|
|
psy_unregister_thermal(psy);
|
|
register_thermal_failed:
|
|
device_del(dev);
|
|
device_add_failed:
|
|
wakeup_init_failed:
|
|
check_supplies_failed:
|
|
dev_set_name_failed:
|
|
put_device(dev);
|
|
success:
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_register);
|
|
|
|
void power_supply_unregister(struct power_supply *psy)
|
|
{
|
|
cancel_work_sync(&psy->changed_work);
|
|
sysfs_remove_link(&psy->dev->kobj, "powers");
|
|
power_supply_remove_triggers(psy);
|
|
psy_unregister_cooler(psy);
|
|
psy_unregister_thermal(psy);
|
|
device_init_wakeup(psy->dev, false);
|
|
device_unregister(psy->dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(power_supply_unregister);
|
|
|
|
static int __init power_supply_class_init(void)
|
|
{
|
|
power_supply_class = class_create(THIS_MODULE, "power_supply");
|
|
|
|
if (IS_ERR(power_supply_class))
|
|
return PTR_ERR(power_supply_class);
|
|
|
|
power_supply_class->dev_uevent = power_supply_uevent;
|
|
power_supply_init_attrs(&power_supply_dev_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit power_supply_class_exit(void)
|
|
{
|
|
class_destroy(power_supply_class);
|
|
}
|
|
|
|
subsys_initcall(power_supply_class_init);
|
|
module_exit(power_supply_class_exit);
|
|
|
|
MODULE_DESCRIPTION("Universal power supply monitor class");
|
|
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>, "
|
|
"Szabolcs Gyurko, "
|
|
"Anton Vorontsov <cbou@mail.ru>");
|
|
MODULE_LICENSE("GPL");
|