iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/tty/serial
History
Sascha Hauer 8178eeb3e8 serial: imx: remove log spamming error message 
Each time the DMA engine signals a transaction error the driver prints
a message at error level. Getting transaction errors is pretty much
expected on baudrate mismatches and the correspoding error counters
are increased in this case properly. Remove the error message which
is possibly repeated at a very high rate which can lock up the whole
system.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 12:18:17 +02:00
..
8250
dmaengine updates for v5.2-rc1
2019-05-09 08:51:45 -07:00
cpm_uart
tty: add SPDX identifiers to Kconfig and Makefiles
2019-04-04 18:48:43 +02:00
jsm
tty: add SPDX identifiers to Kconfig and Makefiles
2019-04-04 18:48:43 +02:00
21285.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
altera_jtaguart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
altera_uart.c
serial: altera: set RRDY flag also without irq
2018-02-28 13:30:09 +01:00
amba-pl010.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
amba-pl011.c
serial: set suppress_bind_attrs flag only if builtin
2018-11-09 09:07:17 -08:00
amba-pl011.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
apbuart.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
apbuart.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
ar933x_uart.c
serial: ar933x_uart: Fix build failure with disabled console
2019-03-19 15:37:44 +01:00
arc_uart.c
serial: arc_uart: Fix out-of-bounds access through DT alias
2018-02-28 15:29:59 +01:00
atmel_serial.c
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
2019-03-28 00:27:48 +09:00
atmel_serial.h
tty/serial: atmel: add ISO7816 support
2018-10-02 13:38:55 -07:00
bcm63xx_uart.c
MIPS changes for 4.15
2017-11-15 11:36:08 -08:00
clps711x.c
serial: clps711x: Remove board support
2019-01-08 16:55:18 +01:00
digicolor-usart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
dz.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
dz.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
earlycon-arm-semihost.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
earlycon-riscv-sbi.c
tty/serial: use uart_console_write in the RISC-V SBL early console
2019-01-23 15:41:50 -08:00
earlycon.c
earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
2018-05-14 13:41:05 +02:00
efm32-uart.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
fsl_lpuart.c
serial: fsl_lpuart: DMA support for 32-bit variant
2019-01-30 09:31:30 +01:00
icom.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
icom.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ifx6x60.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
ifx6x60.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
imx.c
serial: imx: remove log spamming error message
2019-05-21 12:18:17 +02:00
ioc3_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ioc4_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ip22zilog.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
ip22zilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
Kconfig
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
kgdb_nmi.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
kgdboc.c
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
2019-03-28 00:27:48 +09:00
lantiq.c
serial: lantiq: Do not swap register read/writes
2019-01-08 16:53:36 +01:00
lpc32xx_hs.c
tty: serial: lpc32xx_hs: fix missing console boot messages
2019-01-18 11:23:00 +01:00
Makefile
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
max310x.c
serial: max310x: Fix to avoid potential NULL pointer dereference
2019-03-19 15:37:43 +01:00
max3100.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
mcf.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
men_z135_uart.c
drivers: Remove explicit invocations of mmiowb()
2019-04-08 12:01:02 +01:00
meson_uart.c
tty: serial: meson: if no alias specified use an available id
2019-01-18 11:22:22 +01:00
milbeaut_usio.c
serial: milbeaut_usio: Fix error handling in probe and remove
2019-04-29 16:20:24 +02:00
mpc52xx_uart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
mps2-uart.c
serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
2019-01-31 19:34:10 +01:00
mpsc.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
msm_serial.c
tty: serial: msm_serial: Fix XON/XOFF
2019-05-21 12:18:16 +02:00
mux.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
mvebu-uart.c
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-19 15:37:43 +01:00
mxs-auart.c
tty: mxs-auart: fix a potential NULL pointer dereference
2019-03-19 15:37:43 +01:00
netx-serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
omap-serial.c
tty: omap-serial: Fix initial on-boot RTS GPIO level
2018-01-09 16:45:17 +01:00
owl-uart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
pch_uart.c
PCI: Move Rohm Vendor ID to generic list
2019-02-01 17:24:52 -06:00
pic32_uart.c
serial: set suppress_bind_attrs flag only if builtin
2018-11-09 09:07:17 -08:00
pic32_uart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
pmac_zilog.c
tty: Use of_node_name_{eq,prefix} for node name comparisons
2018-12-17 16:12:17 +01:00
pmac_zilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
pnx8xxx_uart.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
pxa.c
serial: pxa: Fix an error handling path in 'serial_pxa_probe()'
2018-06-28 21:07:54 +09:00
qcom_geni_serial.c
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
2019-03-19 15:37:44 +01:00
rda-uart.c
tty: serial: Add RDA8810PL UART driver
2018-12-31 13:10:01 -08:00
rp2.c
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
sa1100.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
samsung.c
tty: serial: samsung: Enable baud clock during initialisation
2019-02-19 13:42:08 +01:00
samsung.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sb1250-duart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sc16is7xx.c
Merge 5.1-rc6 into tty-next
2019-04-21 23:20:08 +02:00
sccnxp.c
serial: sccnxp: Allow to use non-standard baud rates
2018-12-20 16:26:59 +01:00
serial_core.c
tty: serial_core: fix error code returned by uart_register_driver()
2019-04-25 11:39:51 +02:00
serial_ks8695.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
serial_mctrl_gpio.c
gpiolib: Pass array info to get/set array functions
2018-09-13 11:16:54 +02:00
serial_mctrl_gpio.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
serial_txx9.c
drivers: Remove explicit invocations of mmiowb()
2019-04-08 12:01:02 +01:00
serial-tegra.c
serial: tegra: fix some spelling mistakes
2018-11-09 08:58:18 -08:00
sh-sci.c
serial: sh-sci: Fix HSCIF RX sampling point adjustment
2019-04-16 15:24:38 +02:00
sh-sci.h
serial: sh-sci: Support for HSCIF RX sampling point adjustment
2018-04-23 10:08:18 +02:00
sifive.c
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
sirfsoc_uart.c
serial: sirf: Fix out-of-bounds access through DT alias
2018-02-28 15:30:00 +01:00
sirfsoc_uart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sn_console.c
tty: fix up a few remaining files without SPDX identifiers
2019-04-04 18:48:43 +02:00
sprd_serial.c
serial: sprd: Fix a copy-paste err in sprd_request_dma()
2019-04-16 15:21:33 +02:00
st-asc.c
tty: serial: simplify getting .drvdata
2018-04-22 17:29:43 +02:00
stm32-usart.c
serial: stm32: fix initialization of RS485 mode
2018-03-15 17:39:43 +01:00
stm32-usart.h
serial: stm32: add support for RS485 hardware control mode
2018-03-14 13:35:37 +01:00
suncore.c
tty: Use of_node_name_{eq,prefix} for node name comparisons
2018-12-17 16:12:17 +01:00
sunhv.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
sunsab.c
treewide: kzalloc() -> kcalloc()
2018-06-12 16:19:22 -07:00
sunsab.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
sunsu.c
TTY/Serial driver patches for 4.21-rc1
2018-12-28 20:33:54 -08:00
sunzilog.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
sunzilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
tegra-tcu.c
serial: Add Tegra Combined UART driver
2019-01-30 09:31:31 +01:00
timbuart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
timbuart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
uartlite.c
serial-uartlite: fix null pointer dereference on pointer port
2018-11-27 09:08:15 +01:00
ucc_uart.c
docs: serial: convert docs to ReST and rename to *.rst
2019-04-25 11:37:42 +02:00
vr41xx_siu.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
vt8500_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
xilinx_uartps.c
serial: uartps: Add support for cts-override
2019-04-29 16:20:24 +02:00
zs.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
zs.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00