844f104790
After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.
static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
struct dsa_user_priv *p = netdev_priv(dev);
return p->dp;
}
Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.
But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:
$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[ 43.309174] ==================================================================
[ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[ 43.330058]
[ 43.342436] Call trace:
[ 43.366542] dsa_user_prechangeupper+0x30/0xe8
[ 43.371024] dsa_user_netdevice_event+0xb38/0xee8
[ 43.375768] notifier_call_chain+0xa4/0x210
[ 43.379985] raw_notifier_call_chain+0x24/0x38
[ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8
[ 43.389120] netdev_upper_dev_link+0x70/0xa8
[ 43.393424] register_vlan_dev+0x1bc/0x310
[ 43.397554] vlan_newlink+0x210/0x248
[ 43.401247] rtnl_newlink+0x9fc/0xe30
[ 43.404942] rtnetlink_rcv_msg+0x378/0x580
Avoid the kernel oops by dereferencing after the type check, as customary.
Fixes: 4c3f80d22b
("net: dsa: walk through all changeupper notifier functions")
Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3708 lines
91 KiB
C
3708 lines
91 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* net/dsa/user.c - user device handling
|
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
|
*/
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phy_fixed.h>
|
|
#include <linux/phylink.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/mdio.h>
|
|
#include <net/rtnetlink.h>
|
|
#include <net/pkt_cls.h>
|
|
#include <net/selftests.h>
|
|
#include <net/tc_act/tc_mirred.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/if_hsr.h>
|
|
#include <net/dcbnl.h>
|
|
#include <linux/netpoll.h>
|
|
#include <linux/string.h>
|
|
|
|
#include "conduit.h"
|
|
#include "dsa.h"
|
|
#include "netlink.h"
|
|
#include "port.h"
|
|
#include "switch.h"
|
|
#include "tag.h"
|
|
#include "user.h"
|
|
|
|
struct dsa_switchdev_event_work {
|
|
struct net_device *dev;
|
|
struct net_device *orig_dev;
|
|
struct work_struct work;
|
|
unsigned long event;
|
|
/* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and
|
|
* SWITCHDEV_FDB_DEL_TO_DEVICE
|
|
*/
|
|
unsigned char addr[ETH_ALEN];
|
|
u16 vid;
|
|
bool host_addr;
|
|
};
|
|
|
|
enum dsa_standalone_event {
|
|
DSA_UC_ADD,
|
|
DSA_UC_DEL,
|
|
DSA_MC_ADD,
|
|
DSA_MC_DEL,
|
|
};
|
|
|
|
struct dsa_standalone_event_work {
|
|
struct work_struct work;
|
|
struct net_device *dev;
|
|
enum dsa_standalone_event event;
|
|
unsigned char addr[ETH_ALEN];
|
|
u16 vid;
|
|
};
|
|
|
|
struct dsa_host_vlan_rx_filtering_ctx {
|
|
struct net_device *dev;
|
|
const unsigned char *addr;
|
|
enum dsa_standalone_event event;
|
|
};
|
|
|
|
static bool dsa_switch_supports_uc_filtering(struct dsa_switch *ds)
|
|
{
|
|
return ds->ops->port_fdb_add && ds->ops->port_fdb_del &&
|
|
ds->fdb_isolation && !ds->vlan_filtering_is_global &&
|
|
!ds->needs_standalone_vlan_filtering;
|
|
}
|
|
|
|
static bool dsa_switch_supports_mc_filtering(struct dsa_switch *ds)
|
|
{
|
|
return ds->ops->port_mdb_add && ds->ops->port_mdb_del &&
|
|
ds->fdb_isolation && !ds->vlan_filtering_is_global &&
|
|
!ds->needs_standalone_vlan_filtering;
|
|
}
|
|
|
|
static void dsa_user_standalone_event_work(struct work_struct *work)
|
|
{
|
|
struct dsa_standalone_event_work *standalone_work =
|
|
container_of(work, struct dsa_standalone_event_work, work);
|
|
const unsigned char *addr = standalone_work->addr;
|
|
struct net_device *dev = standalone_work->dev;
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_mdb mdb;
|
|
struct dsa_switch *ds = dp->ds;
|
|
u16 vid = standalone_work->vid;
|
|
int err;
|
|
|
|
switch (standalone_work->event) {
|
|
case DSA_UC_ADD:
|
|
err = dsa_port_standalone_host_fdb_add(dp, addr, vid);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to add %pM vid %d to fdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case DSA_UC_DEL:
|
|
err = dsa_port_standalone_host_fdb_del(dp, addr, vid);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to delete %pM vid %d from fdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
}
|
|
|
|
break;
|
|
case DSA_MC_ADD:
|
|
ether_addr_copy(mdb.addr, addr);
|
|
mdb.vid = vid;
|
|
|
|
err = dsa_port_standalone_host_mdb_add(dp, &mdb);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to add %pM vid %d to mdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
break;
|
|
}
|
|
break;
|
|
case DSA_MC_DEL:
|
|
ether_addr_copy(mdb.addr, addr);
|
|
mdb.vid = vid;
|
|
|
|
err = dsa_port_standalone_host_mdb_del(dp, &mdb);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to delete %pM vid %d from mdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
kfree(standalone_work);
|
|
}
|
|
|
|
static int dsa_user_schedule_standalone_work(struct net_device *dev,
|
|
enum dsa_standalone_event event,
|
|
const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_standalone_event_work *standalone_work;
|
|
|
|
standalone_work = kzalloc(sizeof(*standalone_work), GFP_ATOMIC);
|
|
if (!standalone_work)
|
|
return -ENOMEM;
|
|
|
|
INIT_WORK(&standalone_work->work, dsa_user_standalone_event_work);
|
|
standalone_work->event = event;
|
|
standalone_work->dev = dev;
|
|
|
|
ether_addr_copy(standalone_work->addr, addr);
|
|
standalone_work->vid = vid;
|
|
|
|
dsa_schedule_work(&standalone_work->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_user_host_vlan_rx_filtering(void *arg, int vid)
|
|
{
|
|
struct dsa_host_vlan_rx_filtering_ctx *ctx = arg;
|
|
|
|
return dsa_user_schedule_standalone_work(ctx->dev, ctx->event,
|
|
ctx->addr, vid);
|
|
}
|
|
|
|
static int dsa_user_vlan_for_each(struct net_device *dev,
|
|
int (*cb)(void *arg, int vid), void *arg)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_vlan *v;
|
|
int err;
|
|
|
|
lockdep_assert_held(&dev->addr_list_lock);
|
|
|
|
err = cb(arg, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
list_for_each_entry(v, &dp->user_vlans, list) {
|
|
err = cb(arg, v->vid);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_user_sync_uc(struct net_device *dev,
|
|
const unsigned char *addr)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_host_vlan_rx_filtering_ctx ctx = {
|
|
.dev = dev,
|
|
.addr = addr,
|
|
.event = DSA_UC_ADD,
|
|
};
|
|
|
|
dev_uc_add(conduit, addr);
|
|
|
|
if (!dsa_switch_supports_uc_filtering(dp->ds))
|
|
return 0;
|
|
|
|
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
|
|
&ctx);
|
|
}
|
|
|
|
static int dsa_user_unsync_uc(struct net_device *dev,
|
|
const unsigned char *addr)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_host_vlan_rx_filtering_ctx ctx = {
|
|
.dev = dev,
|
|
.addr = addr,
|
|
.event = DSA_UC_DEL,
|
|
};
|
|
|
|
dev_uc_del(conduit, addr);
|
|
|
|
if (!dsa_switch_supports_uc_filtering(dp->ds))
|
|
return 0;
|
|
|
|
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
|
|
&ctx);
|
|
}
|
|
|
|
static int dsa_user_sync_mc(struct net_device *dev,
|
|
const unsigned char *addr)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_host_vlan_rx_filtering_ctx ctx = {
|
|
.dev = dev,
|
|
.addr = addr,
|
|
.event = DSA_MC_ADD,
|
|
};
|
|
|
|
dev_mc_add(conduit, addr);
|
|
|
|
if (!dsa_switch_supports_mc_filtering(dp->ds))
|
|
return 0;
|
|
|
|
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
|
|
&ctx);
|
|
}
|
|
|
|
static int dsa_user_unsync_mc(struct net_device *dev,
|
|
const unsigned char *addr)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_host_vlan_rx_filtering_ctx ctx = {
|
|
.dev = dev,
|
|
.addr = addr,
|
|
.event = DSA_MC_DEL,
|
|
};
|
|
|
|
dev_mc_del(conduit, addr);
|
|
|
|
if (!dsa_switch_supports_mc_filtering(dp->ds))
|
|
return 0;
|
|
|
|
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
|
|
&ctx);
|
|
}
|
|
|
|
void dsa_user_sync_ha(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netif_addr_lock_bh(dev);
|
|
|
|
netdev_for_each_synced_mc_addr(ha, dev)
|
|
dsa_user_sync_mc(dev, ha->addr);
|
|
|
|
netdev_for_each_synced_uc_addr(ha, dev)
|
|
dsa_user_sync_uc(dev, ha->addr);
|
|
|
|
netif_addr_unlock_bh(dev);
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds) ||
|
|
dsa_switch_supports_mc_filtering(ds))
|
|
dsa_flush_workqueue();
|
|
}
|
|
|
|
void dsa_user_unsync_ha(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netif_addr_lock_bh(dev);
|
|
|
|
netdev_for_each_synced_uc_addr(ha, dev)
|
|
dsa_user_unsync_uc(dev, ha->addr);
|
|
|
|
netdev_for_each_synced_mc_addr(ha, dev)
|
|
dsa_user_unsync_mc(dev, ha->addr);
|
|
|
|
netif_addr_unlock_bh(dev);
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds) ||
|
|
dsa_switch_supports_mc_filtering(ds))
|
|
dsa_flush_workqueue();
|
|
}
|
|
|
|
/* user mii_bus handling ***************************************************/
|
|
static int dsa_user_phy_read(struct mii_bus *bus, int addr, int reg)
|
|
{
|
|
struct dsa_switch *ds = bus->priv;
|
|
|
|
if (ds->phys_mii_mask & (1 << addr))
|
|
return ds->ops->phy_read(ds, addr, reg);
|
|
|
|
return 0xffff;
|
|
}
|
|
|
|
static int dsa_user_phy_write(struct mii_bus *bus, int addr, int reg, u16 val)
|
|
{
|
|
struct dsa_switch *ds = bus->priv;
|
|
|
|
if (ds->phys_mii_mask & (1 << addr))
|
|
return ds->ops->phy_write(ds, addr, reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dsa_user_mii_bus_init(struct dsa_switch *ds)
|
|
{
|
|
ds->user_mii_bus->priv = (void *)ds;
|
|
ds->user_mii_bus->name = "dsa user smi";
|
|
ds->user_mii_bus->read = dsa_user_phy_read;
|
|
ds->user_mii_bus->write = dsa_user_phy_write;
|
|
snprintf(ds->user_mii_bus->id, MII_BUS_ID_SIZE, "dsa-%d.%d",
|
|
ds->dst->index, ds->index);
|
|
ds->user_mii_bus->parent = ds->dev;
|
|
ds->user_mii_bus->phy_mask = ~ds->phys_mii_mask;
|
|
}
|
|
|
|
|
|
/* user device handling ****************************************************/
|
|
static int dsa_user_get_iflink(const struct net_device *dev)
|
|
{
|
|
return dsa_user_to_conduit(dev)->ifindex;
|
|
}
|
|
|
|
static int dsa_user_open(struct net_device *dev)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
err = dev_open(conduit, NULL);
|
|
if (err < 0) {
|
|
netdev_err(dev, "failed to open conduit %s\n", conduit->name);
|
|
goto out;
|
|
}
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds)) {
|
|
err = dsa_port_standalone_host_fdb_add(dp, dev->dev_addr, 0);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
|
|
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr)) {
|
|
err = dev_uc_add(conduit, dev->dev_addr);
|
|
if (err < 0)
|
|
goto del_host_addr;
|
|
}
|
|
|
|
err = dsa_port_enable_rt(dp, dev->phydev);
|
|
if (err)
|
|
goto del_unicast;
|
|
|
|
return 0;
|
|
|
|
del_unicast:
|
|
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
|
|
dev_uc_del(conduit, dev->dev_addr);
|
|
del_host_addr:
|
|
if (dsa_switch_supports_uc_filtering(ds))
|
|
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_close(struct net_device *dev)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
dsa_port_disable_rt(dp);
|
|
|
|
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
|
|
dev_uc_del(conduit, dev->dev_addr);
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds))
|
|
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_user_manage_host_flood(struct net_device *dev)
|
|
{
|
|
bool mc = dev->flags & (IFF_PROMISC | IFF_ALLMULTI);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
bool uc = dev->flags & IFF_PROMISC;
|
|
|
|
dsa_port_set_host_flood(dp, uc, mc);
|
|
}
|
|
|
|
static void dsa_user_change_rx_flags(struct net_device *dev, int change)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (change & IFF_ALLMULTI)
|
|
dev_set_allmulti(conduit,
|
|
dev->flags & IFF_ALLMULTI ? 1 : -1);
|
|
if (change & IFF_PROMISC)
|
|
dev_set_promiscuity(conduit,
|
|
dev->flags & IFF_PROMISC ? 1 : -1);
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds) &&
|
|
dsa_switch_supports_mc_filtering(ds))
|
|
dsa_user_manage_host_flood(dev);
|
|
}
|
|
|
|
static void dsa_user_set_rx_mode(struct net_device *dev)
|
|
{
|
|
__dev_mc_sync(dev, dsa_user_sync_mc, dsa_user_unsync_mc);
|
|
__dev_uc_sync(dev, dsa_user_sync_uc, dsa_user_unsync_uc);
|
|
}
|
|
|
|
static int dsa_user_set_mac_address(struct net_device *dev, void *a)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct sockaddr *addr = a;
|
|
int err;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
if (ds->ops->port_set_mac_address) {
|
|
err = ds->ops->port_set_mac_address(ds, dp->index,
|
|
addr->sa_data);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* If the port is down, the address isn't synced yet to hardware or
|
|
* to the DSA conduit, so there is nothing to change.
|
|
*/
|
|
if (!(dev->flags & IFF_UP))
|
|
goto out_change_dev_addr;
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds)) {
|
|
err = dsa_port_standalone_host_fdb_add(dp, addr->sa_data, 0);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (!ether_addr_equal(addr->sa_data, conduit->dev_addr)) {
|
|
err = dev_uc_add(conduit, addr->sa_data);
|
|
if (err < 0)
|
|
goto del_unicast;
|
|
}
|
|
|
|
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
|
|
dev_uc_del(conduit, dev->dev_addr);
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds))
|
|
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
|
|
|
|
out_change_dev_addr:
|
|
eth_hw_addr_set(dev, addr->sa_data);
|
|
|
|
return 0;
|
|
|
|
del_unicast:
|
|
if (dsa_switch_supports_uc_filtering(ds))
|
|
dsa_port_standalone_host_fdb_del(dp, addr->sa_data, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
struct dsa_user_dump_ctx {
|
|
struct net_device *dev;
|
|
struct sk_buff *skb;
|
|
struct netlink_callback *cb;
|
|
int idx;
|
|
};
|
|
|
|
static int
|
|
dsa_user_port_fdb_do_dump(const unsigned char *addr, u16 vid,
|
|
bool is_static, void *data)
|
|
{
|
|
struct dsa_user_dump_ctx *dump = data;
|
|
u32 portid = NETLINK_CB(dump->cb->skb).portid;
|
|
u32 seq = dump->cb->nlh->nlmsg_seq;
|
|
struct nlmsghdr *nlh;
|
|
struct ndmsg *ndm;
|
|
|
|
if (dump->idx < dump->cb->args[2])
|
|
goto skip;
|
|
|
|
nlh = nlmsg_put(dump->skb, portid, seq, RTM_NEWNEIGH,
|
|
sizeof(*ndm), NLM_F_MULTI);
|
|
if (!nlh)
|
|
return -EMSGSIZE;
|
|
|
|
ndm = nlmsg_data(nlh);
|
|
ndm->ndm_family = AF_BRIDGE;
|
|
ndm->ndm_pad1 = 0;
|
|
ndm->ndm_pad2 = 0;
|
|
ndm->ndm_flags = NTF_SELF;
|
|
ndm->ndm_type = 0;
|
|
ndm->ndm_ifindex = dump->dev->ifindex;
|
|
ndm->ndm_state = is_static ? NUD_NOARP : NUD_REACHABLE;
|
|
|
|
if (nla_put(dump->skb, NDA_LLADDR, ETH_ALEN, addr))
|
|
goto nla_put_failure;
|
|
|
|
if (vid && nla_put_u16(dump->skb, NDA_VLAN, vid))
|
|
goto nla_put_failure;
|
|
|
|
nlmsg_end(dump->skb, nlh);
|
|
|
|
skip:
|
|
dump->idx++;
|
|
return 0;
|
|
|
|
nla_put_failure:
|
|
nlmsg_cancel(dump->skb, nlh);
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
static int
|
|
dsa_user_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
|
|
struct net_device *dev, struct net_device *filter_dev,
|
|
int *idx)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_user_dump_ctx dump = {
|
|
.dev = dev,
|
|
.skb = skb,
|
|
.cb = cb,
|
|
.idx = *idx,
|
|
};
|
|
int err;
|
|
|
|
err = dsa_port_fdb_dump(dp, dsa_user_port_fdb_do_dump, &dump);
|
|
*idx = dump.idx;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct dsa_switch *ds = p->dp->ds;
|
|
int port = p->dp->index;
|
|
|
|
/* Pass through to switch driver if it supports timestamping */
|
|
switch (cmd) {
|
|
case SIOCGHWTSTAMP:
|
|
if (ds->ops->port_hwtstamp_get)
|
|
return ds->ops->port_hwtstamp_get(ds, port, ifr);
|
|
break;
|
|
case SIOCSHWTSTAMP:
|
|
if (ds->ops->port_hwtstamp_set)
|
|
return ds->ops->port_hwtstamp_set(ds, port, ifr);
|
|
break;
|
|
}
|
|
|
|
return phylink_mii_ioctl(p->dp->pl, ifr, cmd);
|
|
}
|
|
|
|
static int dsa_user_port_attr_set(struct net_device *dev, const void *ctx,
|
|
const struct switchdev_attr *attr,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
int ret;
|
|
|
|
if (ctx && ctx != dp)
|
|
return 0;
|
|
|
|
switch (attr->id) {
|
|
case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
|
|
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_set_state(dp, attr->u.stp_state, true);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_PORT_MST_STATE:
|
|
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_set_mst_state(dp, &attr->u.mst_state, extack);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
|
|
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_vlan_filtering(dp, attr->u.vlan_filtering,
|
|
extack);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME:
|
|
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_ageing_time(dp, attr->u.ageing_time);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_BRIDGE_MST:
|
|
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_mst_enable(dp, attr->u.mst, extack);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS:
|
|
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_pre_bridge_flags(dp, attr->u.brport_flags,
|
|
extack);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS:
|
|
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_bridge_flags(dp, attr->u.brport_flags, extack);
|
|
break;
|
|
case SWITCHDEV_ATTR_ID_VLAN_MSTI:
|
|
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = dsa_port_vlan_msti(dp, &attr->u.vlan_msti);
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Must be called under rcu_read_lock() */
|
|
static int
|
|
dsa_user_vlan_check_for_8021q_uppers(struct net_device *user,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct net_device *upper_dev;
|
|
struct list_head *iter;
|
|
|
|
netdev_for_each_upper_dev_rcu(user, upper_dev, iter) {
|
|
u16 vid;
|
|
|
|
if (!is_vlan_dev(upper_dev))
|
|
continue;
|
|
|
|
vid = vlan_dev_vlan_id(upper_dev);
|
|
if (vid == vlan->vid)
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_user_vlan_add(struct net_device *dev,
|
|
const struct switchdev_obj *obj,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan *vlan;
|
|
int err;
|
|
|
|
if (dsa_port_skip_vlan_configuration(dp)) {
|
|
NL_SET_ERR_MSG_MOD(extack, "skipping configuration of VLAN");
|
|
return 0;
|
|
}
|
|
|
|
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
|
|
|
|
/* Deny adding a bridge VLAN when there is already an 802.1Q upper with
|
|
* the same VID.
|
|
*/
|
|
if (br_vlan_enabled(dsa_port_bridge_dev_get(dp))) {
|
|
rcu_read_lock();
|
|
err = dsa_user_vlan_check_for_8021q_uppers(dev, vlan);
|
|
rcu_read_unlock();
|
|
if (err) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Port already has a VLAN upper with this VID");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return dsa_port_vlan_add(dp, vlan, extack);
|
|
}
|
|
|
|
/* Offload a VLAN installed on the bridge or on a foreign interface by
|
|
* installing it as a VLAN towards the CPU port.
|
|
*/
|
|
static int dsa_user_host_vlan_add(struct net_device *dev,
|
|
const struct switchdev_obj *obj,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan vlan;
|
|
|
|
/* Do nothing if this is a software bridge */
|
|
if (!dp->bridge)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (dsa_port_skip_vlan_configuration(dp)) {
|
|
NL_SET_ERR_MSG_MOD(extack, "skipping configuration of VLAN");
|
|
return 0;
|
|
}
|
|
|
|
vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
|
|
|
|
/* Even though drivers often handle CPU membership in special ways,
|
|
* it doesn't make sense to program a PVID, so clear this flag.
|
|
*/
|
|
vlan.flags &= ~BRIDGE_VLAN_INFO_PVID;
|
|
|
|
return dsa_port_host_vlan_add(dp, &vlan, extack);
|
|
}
|
|
|
|
static int dsa_user_port_obj_add(struct net_device *dev, const void *ctx,
|
|
const struct switchdev_obj *obj,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
int err;
|
|
|
|
if (ctx && ctx != dp)
|
|
return 0;
|
|
|
|
switch (obj->id) {
|
|
case SWITCHDEV_OBJ_ID_PORT_MDB:
|
|
if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_HOST_MDB:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_bridge_host_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_PORT_VLAN:
|
|
if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
|
|
err = dsa_user_vlan_add(dev, obj, extack);
|
|
else
|
|
err = dsa_user_host_vlan_add(dev, obj, extack);
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_MRP:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mrp_add(dp, SWITCHDEV_OBJ_MRP(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_RING_ROLE_MRP:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mrp_add_ring_role(dp,
|
|
SWITCHDEV_OBJ_RING_ROLE_MRP(obj));
|
|
break;
|
|
default:
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_vlan_del(struct net_device *dev,
|
|
const struct switchdev_obj *obj)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan *vlan;
|
|
|
|
if (dsa_port_skip_vlan_configuration(dp))
|
|
return 0;
|
|
|
|
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
|
|
|
|
return dsa_port_vlan_del(dp, vlan);
|
|
}
|
|
|
|
static int dsa_user_host_vlan_del(struct net_device *dev,
|
|
const struct switchdev_obj *obj)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan *vlan;
|
|
|
|
/* Do nothing if this is a software bridge */
|
|
if (!dp->bridge)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (dsa_port_skip_vlan_configuration(dp))
|
|
return 0;
|
|
|
|
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
|
|
|
|
return dsa_port_host_vlan_del(dp, vlan);
|
|
}
|
|
|
|
static int dsa_user_port_obj_del(struct net_device *dev, const void *ctx,
|
|
const struct switchdev_obj *obj)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
int err;
|
|
|
|
if (ctx && ctx != dp)
|
|
return 0;
|
|
|
|
switch (obj->id) {
|
|
case SWITCHDEV_OBJ_ID_PORT_MDB:
|
|
if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_HOST_MDB:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_bridge_host_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_PORT_VLAN:
|
|
if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
|
|
err = dsa_user_vlan_del(dev, obj);
|
|
else
|
|
err = dsa_user_host_vlan_del(dev, obj);
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_MRP:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mrp_del(dp, SWITCHDEV_OBJ_MRP(obj));
|
|
break;
|
|
case SWITCHDEV_OBJ_ID_RING_ROLE_MRP:
|
|
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dsa_port_mrp_del_ring_role(dp,
|
|
SWITCHDEV_OBJ_RING_ROLE_MRP(obj));
|
|
break;
|
|
default:
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static inline netdev_tx_t dsa_user_netpoll_send_skb(struct net_device *dev,
|
|
struct sk_buff *skb)
|
|
{
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
|
|
return netpoll_send_skb(p->netpoll, skb);
|
|
#else
|
|
BUG();
|
|
return NETDEV_TX_OK;
|
|
#endif
|
|
}
|
|
|
|
static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct dsa_switch *ds = p->dp->ds;
|
|
|
|
if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
|
|
return;
|
|
|
|
if (!ds->ops->port_txtstamp)
|
|
return;
|
|
|
|
ds->ops->port_txtstamp(ds, p->dp->index, skb);
|
|
}
|
|
|
|
netdev_tx_t dsa_enqueue_skb(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
/* SKB for netpoll still need to be mangled with the protocol-specific
|
|
* tag to be successfully transmitted
|
|
*/
|
|
if (unlikely(netpoll_tx_running(dev)))
|
|
return dsa_user_netpoll_send_skb(dev, skb);
|
|
|
|
/* Queue the SKB for transmission on the parent interface, but
|
|
* do not modify its EtherType
|
|
*/
|
|
skb->dev = dsa_user_to_conduit(dev);
|
|
dev_queue_xmit(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_enqueue_skb);
|
|
|
|
static netdev_tx_t dsa_user_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct sk_buff *nskb;
|
|
|
|
dev_sw_netstats_tx_add(dev, 1, skb->len);
|
|
|
|
memset(skb->cb, 0, sizeof(skb->cb));
|
|
|
|
/* Handle tx timestamp if any */
|
|
dsa_skb_tx_timestamp(p, skb);
|
|
|
|
if (skb_ensure_writable_head_tail(skb, dev)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* needed_tailroom should still be 'warm' in the cache line from
|
|
* skb_ensure_writable_head_tail(), which has also ensured that
|
|
* padding is safe.
|
|
*/
|
|
if (dev->needed_tailroom)
|
|
eth_skb_pad(skb);
|
|
|
|
/* Transmit function may have to reallocate the original SKB,
|
|
* in which case it must have freed it. Only free it here on error.
|
|
*/
|
|
nskb = p->xmit(skb, dev);
|
|
if (!nskb) {
|
|
kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
return dsa_enqueue_skb(nskb, dev);
|
|
}
|
|
|
|
/* ethtool operations *******************************************************/
|
|
|
|
static void dsa_user_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
strscpy(drvinfo->driver, "dsa", sizeof(drvinfo->driver));
|
|
strscpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
|
|
strscpy(drvinfo->bus_info, "platform", sizeof(drvinfo->bus_info));
|
|
}
|
|
|
|
static int dsa_user_get_regs_len(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_regs_len)
|
|
return ds->ops->get_regs_len(ds, dp->index);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static void
|
|
dsa_user_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *_p)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_regs)
|
|
ds->ops->get_regs(ds, dp->index, regs, _p);
|
|
}
|
|
|
|
static int dsa_user_nway_reset(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
|
|
return phylink_ethtool_nway_reset(dp->pl);
|
|
}
|
|
|
|
static int dsa_user_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->cd && ds->cd->eeprom_len)
|
|
return ds->cd->eeprom_len;
|
|
|
|
if (ds->ops->get_eeprom_len)
|
|
return ds->ops->get_eeprom_len(ds);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_user_get_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_eeprom)
|
|
return ds->ops->get_eeprom(ds, eeprom, data);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int dsa_user_set_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->set_eeprom)
|
|
return ds->ops->set_eeprom(ds, eeprom, data);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static void dsa_user_get_strings(struct net_device *dev,
|
|
uint32_t stringset, uint8_t *data)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (stringset == ETH_SS_STATS) {
|
|
int len = ETH_GSTRING_LEN;
|
|
|
|
strscpy_pad(data, "tx_packets", len);
|
|
strscpy_pad(data + len, "tx_bytes", len);
|
|
strscpy_pad(data + 2 * len, "rx_packets", len);
|
|
strscpy_pad(data + 3 * len, "rx_bytes", len);
|
|
if (ds->ops->get_strings)
|
|
ds->ops->get_strings(ds, dp->index, stringset,
|
|
data + 4 * len);
|
|
} else if (stringset == ETH_SS_TEST) {
|
|
net_selftest_get_strings(data);
|
|
}
|
|
|
|
}
|
|
|
|
static void dsa_user_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct pcpu_sw_netstats *s;
|
|
unsigned int start;
|
|
int i;
|
|
|
|
for_each_possible_cpu(i) {
|
|
u64 tx_packets, tx_bytes, rx_packets, rx_bytes;
|
|
|
|
s = per_cpu_ptr(dev->tstats, i);
|
|
do {
|
|
start = u64_stats_fetch_begin(&s->syncp);
|
|
tx_packets = u64_stats_read(&s->tx_packets);
|
|
tx_bytes = u64_stats_read(&s->tx_bytes);
|
|
rx_packets = u64_stats_read(&s->rx_packets);
|
|
rx_bytes = u64_stats_read(&s->rx_bytes);
|
|
} while (u64_stats_fetch_retry(&s->syncp, start));
|
|
data[0] += tx_packets;
|
|
data[1] += tx_bytes;
|
|
data[2] += rx_packets;
|
|
data[3] += rx_bytes;
|
|
}
|
|
if (ds->ops->get_ethtool_stats)
|
|
ds->ops->get_ethtool_stats(ds, dp->index, data + 4);
|
|
}
|
|
|
|
static int dsa_user_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (sset == ETH_SS_STATS) {
|
|
int count = 0;
|
|
|
|
if (ds->ops->get_sset_count) {
|
|
count = ds->ops->get_sset_count(ds, dp->index, sset);
|
|
if (count < 0)
|
|
return count;
|
|
}
|
|
|
|
return count + 4;
|
|
} else if (sset == ETH_SS_TEST) {
|
|
return net_selftest_get_count();
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static void dsa_user_get_eth_phy_stats(struct net_device *dev,
|
|
struct ethtool_eth_phy_stats *phy_stats)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_eth_phy_stats)
|
|
ds->ops->get_eth_phy_stats(ds, dp->index, phy_stats);
|
|
}
|
|
|
|
static void dsa_user_get_eth_mac_stats(struct net_device *dev,
|
|
struct ethtool_eth_mac_stats *mac_stats)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_eth_mac_stats)
|
|
ds->ops->get_eth_mac_stats(ds, dp->index, mac_stats);
|
|
}
|
|
|
|
static void
|
|
dsa_user_get_eth_ctrl_stats(struct net_device *dev,
|
|
struct ethtool_eth_ctrl_stats *ctrl_stats)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_eth_ctrl_stats)
|
|
ds->ops->get_eth_ctrl_stats(ds, dp->index, ctrl_stats);
|
|
}
|
|
|
|
static void
|
|
dsa_user_get_rmon_stats(struct net_device *dev,
|
|
struct ethtool_rmon_stats *rmon_stats,
|
|
const struct ethtool_rmon_hist_range **ranges)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_rmon_stats)
|
|
ds->ops->get_rmon_stats(ds, dp->index, rmon_stats, ranges);
|
|
}
|
|
|
|
static void dsa_user_net_selftest(struct net_device *ndev,
|
|
struct ethtool_test *etest, u64 *buf)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(ndev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->self_test) {
|
|
ds->ops->self_test(ds, dp->index, etest, buf);
|
|
return;
|
|
}
|
|
|
|
net_selftest(ndev, etest, buf);
|
|
}
|
|
|
|
static int dsa_user_get_mm(struct net_device *dev,
|
|
struct ethtool_mm_state *state)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->get_mm)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->get_mm(ds, dp->index, state);
|
|
}
|
|
|
|
static int dsa_user_set_mm(struct net_device *dev, struct ethtool_mm_cfg *cfg,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->set_mm)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->set_mm(ds, dp->index, cfg, extack);
|
|
}
|
|
|
|
static void dsa_user_get_mm_stats(struct net_device *dev,
|
|
struct ethtool_mm_stats *stats)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_mm_stats)
|
|
ds->ops->get_mm_stats(ds, dp->index, stats);
|
|
}
|
|
|
|
static void dsa_user_get_wol(struct net_device *dev, struct ethtool_wolinfo *w)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
phylink_ethtool_get_wol(dp->pl, w);
|
|
|
|
if (ds->ops->get_wol)
|
|
ds->ops->get_wol(ds, dp->index, w);
|
|
}
|
|
|
|
static int dsa_user_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
phylink_ethtool_set_wol(dp->pl, w);
|
|
|
|
if (ds->ops->set_wol)
|
|
ret = ds->ops->set_wol(ds, dp->index, w);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dsa_user_set_eee(struct net_device *dev, struct ethtool_eee *e)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int ret;
|
|
|
|
/* Port's PHY and MAC both need to be EEE capable */
|
|
if (!dev->phydev || !dp->pl)
|
|
return -ENODEV;
|
|
|
|
if (!ds->ops->set_mac_eee)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = ds->ops->set_mac_eee(ds, dp->index, e);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return phylink_ethtool_set_eee(dp->pl, e);
|
|
}
|
|
|
|
static int dsa_user_get_eee(struct net_device *dev, struct ethtool_eee *e)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int ret;
|
|
|
|
/* Port's PHY and MAC both need to be EEE capable */
|
|
if (!dev->phydev || !dp->pl)
|
|
return -ENODEV;
|
|
|
|
if (!ds->ops->get_mac_eee)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = ds->ops->get_mac_eee(ds, dp->index, e);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return phylink_ethtool_get_eee(dp->pl, e);
|
|
}
|
|
|
|
static int dsa_user_get_link_ksettings(struct net_device *dev,
|
|
struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
|
|
return phylink_ethtool_ksettings_get(dp->pl, cmd);
|
|
}
|
|
|
|
static int dsa_user_set_link_ksettings(struct net_device *dev,
|
|
const struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
|
|
return phylink_ethtool_ksettings_set(dp->pl, cmd);
|
|
}
|
|
|
|
static void dsa_user_get_pause_stats(struct net_device *dev,
|
|
struct ethtool_pause_stats *pause_stats)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_pause_stats)
|
|
ds->ops->get_pause_stats(ds, dp->index, pause_stats);
|
|
}
|
|
|
|
static void dsa_user_get_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
|
|
phylink_ethtool_get_pauseparam(dp->pl, pause);
|
|
}
|
|
|
|
static int dsa_user_set_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
|
|
return phylink_ethtool_set_pauseparam(dp->pl, pause);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static int dsa_user_netpoll_setup(struct net_device *dev,
|
|
struct netpoll_info *ni)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct netpoll *netpoll;
|
|
int err = 0;
|
|
|
|
netpoll = kzalloc(sizeof(*netpoll), GFP_KERNEL);
|
|
if (!netpoll)
|
|
return -ENOMEM;
|
|
|
|
err = __netpoll_setup(netpoll, conduit);
|
|
if (err) {
|
|
kfree(netpoll);
|
|
goto out;
|
|
}
|
|
|
|
p->netpoll = netpoll;
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void dsa_user_netpoll_cleanup(struct net_device *dev)
|
|
{
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct netpoll *netpoll = p->netpoll;
|
|
|
|
if (!netpoll)
|
|
return;
|
|
|
|
p->netpoll = NULL;
|
|
|
|
__netpoll_free(netpoll);
|
|
}
|
|
|
|
static void dsa_user_poll_controller(struct net_device *dev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static struct dsa_mall_tc_entry *
|
|
dsa_user_mall_tc_entry_find(struct net_device *dev, unsigned long cookie)
|
|
{
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct dsa_mall_tc_entry *mall_tc_entry;
|
|
|
|
list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list)
|
|
if (mall_tc_entry->cookie == cookie)
|
|
return mall_tc_entry;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
dsa_user_add_cls_matchall_mirred(struct net_device *dev,
|
|
struct tc_cls_matchall_offload *cls,
|
|
bool ingress)
|
|
{
|
|
struct netlink_ext_ack *extack = cls->common.extack;
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct dsa_mall_mirror_tc_entry *mirror;
|
|
struct dsa_mall_tc_entry *mall_tc_entry;
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct flow_action_entry *act;
|
|
struct dsa_port *to_dp;
|
|
int err;
|
|
|
|
if (!ds->ops->port_mirror_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (!flow_action_basic_hw_stats_check(&cls->rule->action,
|
|
cls->common.extack))
|
|
return -EOPNOTSUPP;
|
|
|
|
act = &cls->rule->action.entries[0];
|
|
|
|
if (!act->dev)
|
|
return -EINVAL;
|
|
|
|
if (!dsa_user_dev_check(act->dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
|
|
if (!mall_tc_entry)
|
|
return -ENOMEM;
|
|
|
|
mall_tc_entry->cookie = cls->cookie;
|
|
mall_tc_entry->type = DSA_PORT_MALL_MIRROR;
|
|
mirror = &mall_tc_entry->mirror;
|
|
|
|
to_dp = dsa_user_to_port(act->dev);
|
|
|
|
mirror->to_local_port = to_dp->index;
|
|
mirror->ingress = ingress;
|
|
|
|
err = ds->ops->port_mirror_add(ds, dp->index, mirror, ingress, extack);
|
|
if (err) {
|
|
kfree(mall_tc_entry);
|
|
return err;
|
|
}
|
|
|
|
list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
dsa_user_add_cls_matchall_police(struct net_device *dev,
|
|
struct tc_cls_matchall_offload *cls,
|
|
bool ingress)
|
|
{
|
|
struct netlink_ext_ack *extack = cls->common.extack;
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct dsa_mall_policer_tc_entry *policer;
|
|
struct dsa_mall_tc_entry *mall_tc_entry;
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct flow_action_entry *act;
|
|
int err;
|
|
|
|
if (!ds->ops->port_policer_add) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Policing offload not implemented");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (!ingress) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Only supported on ingress qdisc");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (!flow_action_basic_hw_stats_check(&cls->rule->action,
|
|
cls->common.extack))
|
|
return -EOPNOTSUPP;
|
|
|
|
list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list) {
|
|
if (mall_tc_entry->type == DSA_PORT_MALL_POLICER) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Only one port policer allowed");
|
|
return -EEXIST;
|
|
}
|
|
}
|
|
|
|
act = &cls->rule->action.entries[0];
|
|
|
|
mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
|
|
if (!mall_tc_entry)
|
|
return -ENOMEM;
|
|
|
|
mall_tc_entry->cookie = cls->cookie;
|
|
mall_tc_entry->type = DSA_PORT_MALL_POLICER;
|
|
policer = &mall_tc_entry->policer;
|
|
policer->rate_bytes_per_sec = act->police.rate_bytes_ps;
|
|
policer->burst = act->police.burst;
|
|
|
|
err = ds->ops->port_policer_add(ds, dp->index, policer);
|
|
if (err) {
|
|
kfree(mall_tc_entry);
|
|
return err;
|
|
}
|
|
|
|
list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_add_cls_matchall(struct net_device *dev,
|
|
struct tc_cls_matchall_offload *cls,
|
|
bool ingress)
|
|
{
|
|
int err = -EOPNOTSUPP;
|
|
|
|
if (cls->common.protocol == htons(ETH_P_ALL) &&
|
|
flow_offload_has_one_action(&cls->rule->action) &&
|
|
cls->rule->action.entries[0].id == FLOW_ACTION_MIRRED)
|
|
err = dsa_user_add_cls_matchall_mirred(dev, cls, ingress);
|
|
else if (flow_offload_has_one_action(&cls->rule->action) &&
|
|
cls->rule->action.entries[0].id == FLOW_ACTION_POLICE)
|
|
err = dsa_user_add_cls_matchall_police(dev, cls, ingress);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_user_del_cls_matchall(struct net_device *dev,
|
|
struct tc_cls_matchall_offload *cls)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_mall_tc_entry *mall_tc_entry;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
mall_tc_entry = dsa_user_mall_tc_entry_find(dev, cls->cookie);
|
|
if (!mall_tc_entry)
|
|
return;
|
|
|
|
list_del(&mall_tc_entry->list);
|
|
|
|
switch (mall_tc_entry->type) {
|
|
case DSA_PORT_MALL_MIRROR:
|
|
if (ds->ops->port_mirror_del)
|
|
ds->ops->port_mirror_del(ds, dp->index,
|
|
&mall_tc_entry->mirror);
|
|
break;
|
|
case DSA_PORT_MALL_POLICER:
|
|
if (ds->ops->port_policer_del)
|
|
ds->ops->port_policer_del(ds, dp->index);
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
}
|
|
|
|
kfree(mall_tc_entry);
|
|
}
|
|
|
|
static int dsa_user_setup_tc_cls_matchall(struct net_device *dev,
|
|
struct tc_cls_matchall_offload *cls,
|
|
bool ingress)
|
|
{
|
|
if (cls->common.chain_index)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (cls->command) {
|
|
case TC_CLSMATCHALL_REPLACE:
|
|
return dsa_user_add_cls_matchall(dev, cls, ingress);
|
|
case TC_CLSMATCHALL_DESTROY:
|
|
dsa_user_del_cls_matchall(dev, cls);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dsa_user_add_cls_flower(struct net_device *dev,
|
|
struct flow_cls_offload *cls,
|
|
bool ingress)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->cls_flower_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->cls_flower_add(ds, port, cls, ingress);
|
|
}
|
|
|
|
static int dsa_user_del_cls_flower(struct net_device *dev,
|
|
struct flow_cls_offload *cls,
|
|
bool ingress)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->cls_flower_del)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->cls_flower_del(ds, port, cls, ingress);
|
|
}
|
|
|
|
static int dsa_user_stats_cls_flower(struct net_device *dev,
|
|
struct flow_cls_offload *cls,
|
|
bool ingress)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->cls_flower_stats)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->cls_flower_stats(ds, port, cls, ingress);
|
|
}
|
|
|
|
static int dsa_user_setup_tc_cls_flower(struct net_device *dev,
|
|
struct flow_cls_offload *cls,
|
|
bool ingress)
|
|
{
|
|
switch (cls->command) {
|
|
case FLOW_CLS_REPLACE:
|
|
return dsa_user_add_cls_flower(dev, cls, ingress);
|
|
case FLOW_CLS_DESTROY:
|
|
return dsa_user_del_cls_flower(dev, cls, ingress);
|
|
case FLOW_CLS_STATS:
|
|
return dsa_user_stats_cls_flower(dev, cls, ingress);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dsa_user_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
|
|
void *cb_priv, bool ingress)
|
|
{
|
|
struct net_device *dev = cb_priv;
|
|
|
|
if (!tc_can_offload(dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (type) {
|
|
case TC_SETUP_CLSMATCHALL:
|
|
return dsa_user_setup_tc_cls_matchall(dev, type_data, ingress);
|
|
case TC_SETUP_CLSFLOWER:
|
|
return dsa_user_setup_tc_cls_flower(dev, type_data, ingress);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dsa_user_setup_tc_block_cb_ig(enum tc_setup_type type,
|
|
void *type_data, void *cb_priv)
|
|
{
|
|
return dsa_user_setup_tc_block_cb(type, type_data, cb_priv, true);
|
|
}
|
|
|
|
static int dsa_user_setup_tc_block_cb_eg(enum tc_setup_type type,
|
|
void *type_data, void *cb_priv)
|
|
{
|
|
return dsa_user_setup_tc_block_cb(type, type_data, cb_priv, false);
|
|
}
|
|
|
|
static LIST_HEAD(dsa_user_block_cb_list);
|
|
|
|
static int dsa_user_setup_tc_block(struct net_device *dev,
|
|
struct flow_block_offload *f)
|
|
{
|
|
struct flow_block_cb *block_cb;
|
|
flow_setup_cb_t *cb;
|
|
|
|
if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
|
|
cb = dsa_user_setup_tc_block_cb_ig;
|
|
else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS)
|
|
cb = dsa_user_setup_tc_block_cb_eg;
|
|
else
|
|
return -EOPNOTSUPP;
|
|
|
|
f->driver_block_list = &dsa_user_block_cb_list;
|
|
|
|
switch (f->command) {
|
|
case FLOW_BLOCK_BIND:
|
|
if (flow_block_cb_is_busy(cb, dev, &dsa_user_block_cb_list))
|
|
return -EBUSY;
|
|
|
|
block_cb = flow_block_cb_alloc(cb, dev, dev, NULL);
|
|
if (IS_ERR(block_cb))
|
|
return PTR_ERR(block_cb);
|
|
|
|
flow_block_cb_add(block_cb, f);
|
|
list_add_tail(&block_cb->driver_list, &dsa_user_block_cb_list);
|
|
return 0;
|
|
case FLOW_BLOCK_UNBIND:
|
|
block_cb = flow_block_cb_lookup(f->block, cb, dev);
|
|
if (!block_cb)
|
|
return -ENOENT;
|
|
|
|
flow_block_cb_remove(block_cb, f);
|
|
list_del(&block_cb->driver_list);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dsa_user_setup_ft_block(struct dsa_switch *ds, int port,
|
|
void *type_data)
|
|
{
|
|
struct net_device *conduit = dsa_port_to_conduit(dsa_to_port(ds, port));
|
|
|
|
if (!conduit->netdev_ops->ndo_setup_tc)
|
|
return -EOPNOTSUPP;
|
|
|
|
return conduit->netdev_ops->ndo_setup_tc(conduit, TC_SETUP_FT, type_data);
|
|
}
|
|
|
|
static int dsa_user_setup_tc(struct net_device *dev, enum tc_setup_type type,
|
|
void *type_data)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
switch (type) {
|
|
case TC_SETUP_BLOCK:
|
|
return dsa_user_setup_tc_block(dev, type_data);
|
|
case TC_SETUP_FT:
|
|
return dsa_user_setup_ft_block(ds, dp->index, type_data);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (!ds->ops->port_setup_tc)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->port_setup_tc(ds, dp->index, type, type_data);
|
|
}
|
|
|
|
static int dsa_user_get_rxnfc(struct net_device *dev,
|
|
struct ethtool_rxnfc *nfc, u32 *rule_locs)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->get_rxnfc)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->get_rxnfc(ds, dp->index, nfc, rule_locs);
|
|
}
|
|
|
|
static int dsa_user_set_rxnfc(struct net_device *dev,
|
|
struct ethtool_rxnfc *nfc)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->set_rxnfc)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->set_rxnfc(ds, dp->index, nfc);
|
|
}
|
|
|
|
static int dsa_user_get_ts_info(struct net_device *dev,
|
|
struct ethtool_ts_info *ts)
|
|
{
|
|
struct dsa_user_priv *p = netdev_priv(dev);
|
|
struct dsa_switch *ds = p->dp->ds;
|
|
|
|
if (!ds->ops->get_ts_info)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->get_ts_info(ds, p->dp->index, ts);
|
|
}
|
|
|
|
static int dsa_user_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
|
|
u16 vid)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan vlan = {
|
|
.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
|
|
.vid = vid,
|
|
/* This API only allows programming tagged, non-PVID VIDs */
|
|
.flags = 0,
|
|
};
|
|
struct netlink_ext_ack extack = {0};
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct netdev_hw_addr *ha;
|
|
struct dsa_vlan *v;
|
|
int ret;
|
|
|
|
/* User port... */
|
|
ret = dsa_port_vlan_add(dp, &vlan, &extack);
|
|
if (ret) {
|
|
if (extack._msg)
|
|
netdev_err(dev, "%s\n", extack._msg);
|
|
return ret;
|
|
}
|
|
|
|
/* And CPU port... */
|
|
ret = dsa_port_host_vlan_add(dp, &vlan, &extack);
|
|
if (ret) {
|
|
if (extack._msg)
|
|
netdev_err(dev, "CPU port %d: %s\n", dp->cpu_dp->index,
|
|
extack._msg);
|
|
return ret;
|
|
}
|
|
|
|
if (!dsa_switch_supports_uc_filtering(ds) &&
|
|
!dsa_switch_supports_mc_filtering(ds))
|
|
return 0;
|
|
|
|
v = kzalloc(sizeof(*v), GFP_KERNEL);
|
|
if (!v) {
|
|
ret = -ENOMEM;
|
|
goto rollback;
|
|
}
|
|
|
|
netif_addr_lock_bh(dev);
|
|
|
|
v->vid = vid;
|
|
list_add_tail(&v->list, &dp->user_vlans);
|
|
|
|
if (dsa_switch_supports_mc_filtering(ds)) {
|
|
netdev_for_each_synced_mc_addr(ha, dev) {
|
|
dsa_user_schedule_standalone_work(dev, DSA_MC_ADD,
|
|
ha->addr, vid);
|
|
}
|
|
}
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds)) {
|
|
netdev_for_each_synced_uc_addr(ha, dev) {
|
|
dsa_user_schedule_standalone_work(dev, DSA_UC_ADD,
|
|
ha->addr, vid);
|
|
}
|
|
}
|
|
|
|
netif_addr_unlock_bh(dev);
|
|
|
|
dsa_flush_workqueue();
|
|
|
|
return 0;
|
|
|
|
rollback:
|
|
dsa_port_host_vlan_del(dp, &vlan);
|
|
dsa_port_vlan_del(dp, &vlan);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dsa_user_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
|
|
u16 vid)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct switchdev_obj_port_vlan vlan = {
|
|
.vid = vid,
|
|
/* This API only allows programming tagged, non-PVID VIDs */
|
|
.flags = 0,
|
|
};
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct netdev_hw_addr *ha;
|
|
struct dsa_vlan *v;
|
|
int err;
|
|
|
|
err = dsa_port_vlan_del(dp, &vlan);
|
|
if (err)
|
|
return err;
|
|
|
|
err = dsa_port_host_vlan_del(dp, &vlan);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!dsa_switch_supports_uc_filtering(ds) &&
|
|
!dsa_switch_supports_mc_filtering(ds))
|
|
return 0;
|
|
|
|
netif_addr_lock_bh(dev);
|
|
|
|
v = dsa_vlan_find(&dp->user_vlans, &vlan);
|
|
if (!v) {
|
|
netif_addr_unlock_bh(dev);
|
|
return -ENOENT;
|
|
}
|
|
|
|
list_del(&v->list);
|
|
kfree(v);
|
|
|
|
if (dsa_switch_supports_mc_filtering(ds)) {
|
|
netdev_for_each_synced_mc_addr(ha, dev) {
|
|
dsa_user_schedule_standalone_work(dev, DSA_MC_DEL,
|
|
ha->addr, vid);
|
|
}
|
|
}
|
|
|
|
if (dsa_switch_supports_uc_filtering(ds)) {
|
|
netdev_for_each_synced_uc_addr(ha, dev) {
|
|
dsa_user_schedule_standalone_work(dev, DSA_UC_DEL,
|
|
ha->addr, vid);
|
|
}
|
|
}
|
|
|
|
netif_addr_unlock_bh(dev);
|
|
|
|
dsa_flush_workqueue();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_user_restore_vlan(struct net_device *vdev, int vid, void *arg)
|
|
{
|
|
__be16 proto = vdev ? vlan_dev_vlan_proto(vdev) : htons(ETH_P_8021Q);
|
|
|
|
return dsa_user_vlan_rx_add_vid(arg, proto, vid);
|
|
}
|
|
|
|
static int dsa_user_clear_vlan(struct net_device *vdev, int vid, void *arg)
|
|
{
|
|
__be16 proto = vdev ? vlan_dev_vlan_proto(vdev) : htons(ETH_P_8021Q);
|
|
|
|
return dsa_user_vlan_rx_kill_vid(arg, proto, vid);
|
|
}
|
|
|
|
/* Keep the VLAN RX filtering list in sync with the hardware only if VLAN
|
|
* filtering is enabled. The baseline is that only ports that offload a
|
|
* VLAN-aware bridge are VLAN-aware, and standalone ports are VLAN-unaware,
|
|
* but there are exceptions for quirky hardware.
|
|
*
|
|
* If ds->vlan_filtering_is_global = true, then standalone ports which share
|
|
* the same switch with other ports that offload a VLAN-aware bridge are also
|
|
* inevitably VLAN-aware.
|
|
*
|
|
* To summarize, a DSA switch port offloads:
|
|
*
|
|
* - If standalone (this includes software bridge, software LAG):
|
|
* - if ds->needs_standalone_vlan_filtering = true, OR if
|
|
* (ds->vlan_filtering_is_global = true AND there are bridges spanning
|
|
* this switch chip which have vlan_filtering=1)
|
|
* - the 8021q upper VLANs
|
|
* - else (standalone VLAN filtering is not needed, VLAN filtering is not
|
|
* global, or it is, but no port is under a VLAN-aware bridge):
|
|
* - no VLAN (any 8021q upper is a software VLAN)
|
|
*
|
|
* - If under a vlan_filtering=0 bridge which it offload:
|
|
* - if ds->configure_vlan_while_not_filtering = true (default):
|
|
* - the bridge VLANs. These VLANs are committed to hardware but inactive.
|
|
* - else (deprecated):
|
|
* - no VLAN. The bridge VLANs are not restored when VLAN awareness is
|
|
* enabled, so this behavior is broken and discouraged.
|
|
*
|
|
* - If under a vlan_filtering=1 bridge which it offload:
|
|
* - the bridge VLANs
|
|
* - the 8021q upper VLANs
|
|
*/
|
|
int dsa_user_manage_vlan_filtering(struct net_device *user,
|
|
bool vlan_filtering)
|
|
{
|
|
int err;
|
|
|
|
if (vlan_filtering) {
|
|
user->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
|
|
err = vlan_for_each(user, dsa_user_restore_vlan, user);
|
|
if (err) {
|
|
vlan_for_each(user, dsa_user_clear_vlan, user);
|
|
user->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
return err;
|
|
}
|
|
} else {
|
|
err = vlan_for_each(user, dsa_user_clear_vlan, user);
|
|
if (err)
|
|
return err;
|
|
|
|
user->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct dsa_hw_port {
|
|
struct list_head list;
|
|
struct net_device *dev;
|
|
int old_mtu;
|
|
};
|
|
|
|
static int dsa_hw_port_list_set_mtu(struct list_head *hw_port_list, int mtu)
|
|
{
|
|
const struct dsa_hw_port *p;
|
|
int err;
|
|
|
|
list_for_each_entry(p, hw_port_list, list) {
|
|
if (p->dev->mtu == mtu)
|
|
continue;
|
|
|
|
err = dev_set_mtu(p->dev, mtu);
|
|
if (err)
|
|
goto rollback;
|
|
}
|
|
|
|
return 0;
|
|
|
|
rollback:
|
|
list_for_each_entry_continue_reverse(p, hw_port_list, list) {
|
|
if (p->dev->mtu == p->old_mtu)
|
|
continue;
|
|
|
|
if (dev_set_mtu(p->dev, p->old_mtu))
|
|
netdev_err(p->dev, "Failed to restore MTU\n");
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_hw_port_list_free(struct list_head *hw_port_list)
|
|
{
|
|
struct dsa_hw_port *p, *n;
|
|
|
|
list_for_each_entry_safe(p, n, hw_port_list, list)
|
|
kfree(p);
|
|
}
|
|
|
|
/* Make the hardware datapath to/from @dev limited to a common MTU */
|
|
static void dsa_bridge_mtu_normalization(struct dsa_port *dp)
|
|
{
|
|
struct list_head hw_port_list;
|
|
struct dsa_switch_tree *dst;
|
|
int min_mtu = ETH_MAX_MTU;
|
|
struct dsa_port *other_dp;
|
|
int err;
|
|
|
|
if (!dp->ds->mtu_enforcement_ingress)
|
|
return;
|
|
|
|
if (!dp->bridge)
|
|
return;
|
|
|
|
INIT_LIST_HEAD(&hw_port_list);
|
|
|
|
/* Populate the list of ports that are part of the same bridge
|
|
* as the newly added/modified port
|
|
*/
|
|
list_for_each_entry(dst, &dsa_tree_list, list) {
|
|
list_for_each_entry(other_dp, &dst->ports, list) {
|
|
struct dsa_hw_port *hw_port;
|
|
struct net_device *user;
|
|
|
|
if (other_dp->type != DSA_PORT_TYPE_USER)
|
|
continue;
|
|
|
|
if (!dsa_port_bridge_same(dp, other_dp))
|
|
continue;
|
|
|
|
if (!other_dp->ds->mtu_enforcement_ingress)
|
|
continue;
|
|
|
|
user = other_dp->user;
|
|
|
|
if (min_mtu > user->mtu)
|
|
min_mtu = user->mtu;
|
|
|
|
hw_port = kzalloc(sizeof(*hw_port), GFP_KERNEL);
|
|
if (!hw_port)
|
|
goto out;
|
|
|
|
hw_port->dev = user;
|
|
hw_port->old_mtu = user->mtu;
|
|
|
|
list_add(&hw_port->list, &hw_port_list);
|
|
}
|
|
}
|
|
|
|
/* Attempt to configure the entire hardware bridge to the newly added
|
|
* interface's MTU first, regardless of whether the intention of the
|
|
* user was to raise or lower it.
|
|
*/
|
|
err = dsa_hw_port_list_set_mtu(&hw_port_list, dp->user->mtu);
|
|
if (!err)
|
|
goto out;
|
|
|
|
/* Clearly that didn't work out so well, so just set the minimum MTU on
|
|
* all hardware bridge ports now. If this fails too, then all ports will
|
|
* still have their old MTU rolled back anyway.
|
|
*/
|
|
dsa_hw_port_list_set_mtu(&hw_port_list, min_mtu);
|
|
|
|
out:
|
|
dsa_hw_port_list_free(&hw_port_list);
|
|
}
|
|
|
|
int dsa_user_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct dsa_port *other_dp;
|
|
int largest_mtu = 0;
|
|
int new_conduit_mtu;
|
|
int old_conduit_mtu;
|
|
int mtu_limit;
|
|
int overhead;
|
|
int cpu_mtu;
|
|
int err;
|
|
|
|
if (!ds->ops->port_change_mtu)
|
|
return -EOPNOTSUPP;
|
|
|
|
dsa_tree_for_each_user_port(other_dp, ds->dst) {
|
|
int user_mtu;
|
|
|
|
/* During probe, this function will be called for each user
|
|
* device, while not all of them have been allocated. That's
|
|
* ok, it doesn't change what the maximum is, so ignore it.
|
|
*/
|
|
if (!other_dp->user)
|
|
continue;
|
|
|
|
/* Pretend that we already applied the setting, which we
|
|
* actually haven't (still haven't done all integrity checks)
|
|
*/
|
|
if (dp == other_dp)
|
|
user_mtu = new_mtu;
|
|
else
|
|
user_mtu = other_dp->user->mtu;
|
|
|
|
if (largest_mtu < user_mtu)
|
|
largest_mtu = user_mtu;
|
|
}
|
|
|
|
overhead = dsa_tag_protocol_overhead(cpu_dp->tag_ops);
|
|
mtu_limit = min_t(int, conduit->max_mtu, dev->max_mtu + overhead);
|
|
old_conduit_mtu = conduit->mtu;
|
|
new_conduit_mtu = largest_mtu + overhead;
|
|
if (new_conduit_mtu > mtu_limit)
|
|
return -ERANGE;
|
|
|
|
/* If the conduit MTU isn't over limit, there's no need to check the CPU
|
|
* MTU, since that surely isn't either.
|
|
*/
|
|
cpu_mtu = largest_mtu;
|
|
|
|
/* Start applying stuff */
|
|
if (new_conduit_mtu != old_conduit_mtu) {
|
|
err = dev_set_mtu(conduit, new_conduit_mtu);
|
|
if (err < 0)
|
|
goto out_conduit_failed;
|
|
|
|
/* We only need to propagate the MTU of the CPU port to
|
|
* upstream switches, so emit a notifier which updates them.
|
|
*/
|
|
err = dsa_port_mtu_change(cpu_dp, cpu_mtu);
|
|
if (err)
|
|
goto out_cpu_failed;
|
|
}
|
|
|
|
err = ds->ops->port_change_mtu(ds, dp->index, new_mtu);
|
|
if (err)
|
|
goto out_port_failed;
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
dsa_bridge_mtu_normalization(dp);
|
|
|
|
return 0;
|
|
|
|
out_port_failed:
|
|
if (new_conduit_mtu != old_conduit_mtu)
|
|
dsa_port_mtu_change(cpu_dp, old_conduit_mtu - overhead);
|
|
out_cpu_failed:
|
|
if (new_conduit_mtu != old_conduit_mtu)
|
|
dev_set_mtu(conduit, old_conduit_mtu);
|
|
out_conduit_failed:
|
|
return err;
|
|
}
|
|
|
|
static int __maybe_unused
|
|
dsa_user_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
unsigned long mask, new_prio;
|
|
int err, port = dp->index;
|
|
|
|
if (!ds->ops->port_set_default_prio)
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dcb_ieee_setapp(dev, app);
|
|
if (err)
|
|
return err;
|
|
|
|
mask = dcb_ieee_getapp_mask(dev, app);
|
|
new_prio = __fls(mask);
|
|
|
|
err = ds->ops->port_set_default_prio(ds, port, new_prio);
|
|
if (err) {
|
|
dcb_ieee_delapp(dev, app);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused
|
|
dsa_user_dcbnl_add_dscp_prio(struct net_device *dev, struct dcb_app *app)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
unsigned long mask, new_prio;
|
|
int err, port = dp->index;
|
|
u8 dscp = app->protocol;
|
|
|
|
if (!ds->ops->port_add_dscp_prio)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (dscp >= 64) {
|
|
netdev_err(dev, "DSCP APP entry with protocol value %u is invalid\n",
|
|
dscp);
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = dcb_ieee_setapp(dev, app);
|
|
if (err)
|
|
return err;
|
|
|
|
mask = dcb_ieee_getapp_mask(dev, app);
|
|
new_prio = __fls(mask);
|
|
|
|
err = ds->ops->port_add_dscp_prio(ds, port, dscp, new_prio);
|
|
if (err) {
|
|
dcb_ieee_delapp(dev, app);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dsa_user_dcbnl_ieee_setapp(struct net_device *dev,
|
|
struct dcb_app *app)
|
|
{
|
|
switch (app->selector) {
|
|
case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
|
|
switch (app->protocol) {
|
|
case 0:
|
|
return dsa_user_dcbnl_set_default_prio(dev, app);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case IEEE_8021QAZ_APP_SEL_DSCP:
|
|
return dsa_user_dcbnl_add_dscp_prio(dev, app);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int __maybe_unused
|
|
dsa_user_dcbnl_del_default_prio(struct net_device *dev, struct dcb_app *app)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
unsigned long mask, new_prio;
|
|
int err, port = dp->index;
|
|
|
|
if (!ds->ops->port_set_default_prio)
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dcb_ieee_delapp(dev, app);
|
|
if (err)
|
|
return err;
|
|
|
|
mask = dcb_ieee_getapp_mask(dev, app);
|
|
new_prio = mask ? __fls(mask) : 0;
|
|
|
|
err = ds->ops->port_set_default_prio(ds, port, new_prio);
|
|
if (err) {
|
|
dcb_ieee_setapp(dev, app);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused
|
|
dsa_user_dcbnl_del_dscp_prio(struct net_device *dev, struct dcb_app *app)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err, port = dp->index;
|
|
u8 dscp = app->protocol;
|
|
|
|
if (!ds->ops->port_del_dscp_prio)
|
|
return -EOPNOTSUPP;
|
|
|
|
err = dcb_ieee_delapp(dev, app);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds->ops->port_del_dscp_prio(ds, port, dscp, app->priority);
|
|
if (err) {
|
|
dcb_ieee_setapp(dev, app);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dsa_user_dcbnl_ieee_delapp(struct net_device *dev,
|
|
struct dcb_app *app)
|
|
{
|
|
switch (app->selector) {
|
|
case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
|
|
switch (app->protocol) {
|
|
case 0:
|
|
return dsa_user_dcbnl_del_default_prio(dev, app);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case IEEE_8021QAZ_APP_SEL_DSCP:
|
|
return dsa_user_dcbnl_del_dscp_prio(dev, app);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/* Pre-populate the DCB application priority table with the priorities
|
|
* configured during switch setup, which we read from hardware here.
|
|
*/
|
|
static int dsa_user_dcbnl_init(struct net_device *dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
int err;
|
|
|
|
if (ds->ops->port_get_default_prio) {
|
|
int prio = ds->ops->port_get_default_prio(ds, port);
|
|
struct dcb_app app = {
|
|
.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE,
|
|
.protocol = 0,
|
|
.priority = prio,
|
|
};
|
|
|
|
if (prio < 0)
|
|
return prio;
|
|
|
|
err = dcb_ieee_setapp(dev, &app);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (ds->ops->port_get_dscp_prio) {
|
|
int protocol;
|
|
|
|
for (protocol = 0; protocol < 64; protocol++) {
|
|
struct dcb_app app = {
|
|
.selector = IEEE_8021QAZ_APP_SEL_DSCP,
|
|
.protocol = protocol,
|
|
};
|
|
int prio;
|
|
|
|
prio = ds->ops->port_get_dscp_prio(ds, port, protocol);
|
|
if (prio == -EOPNOTSUPP)
|
|
continue;
|
|
if (prio < 0)
|
|
return prio;
|
|
|
|
app.priority = prio;
|
|
|
|
err = dcb_ieee_setapp(dev, &app);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops dsa_user_ethtool_ops = {
|
|
.get_drvinfo = dsa_user_get_drvinfo,
|
|
.get_regs_len = dsa_user_get_regs_len,
|
|
.get_regs = dsa_user_get_regs,
|
|
.nway_reset = dsa_user_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = dsa_user_get_eeprom_len,
|
|
.get_eeprom = dsa_user_get_eeprom,
|
|
.set_eeprom = dsa_user_set_eeprom,
|
|
.get_strings = dsa_user_get_strings,
|
|
.get_ethtool_stats = dsa_user_get_ethtool_stats,
|
|
.get_sset_count = dsa_user_get_sset_count,
|
|
.get_eth_phy_stats = dsa_user_get_eth_phy_stats,
|
|
.get_eth_mac_stats = dsa_user_get_eth_mac_stats,
|
|
.get_eth_ctrl_stats = dsa_user_get_eth_ctrl_stats,
|
|
.get_rmon_stats = dsa_user_get_rmon_stats,
|
|
.set_wol = dsa_user_set_wol,
|
|
.get_wol = dsa_user_get_wol,
|
|
.set_eee = dsa_user_set_eee,
|
|
.get_eee = dsa_user_get_eee,
|
|
.get_link_ksettings = dsa_user_get_link_ksettings,
|
|
.set_link_ksettings = dsa_user_set_link_ksettings,
|
|
.get_pause_stats = dsa_user_get_pause_stats,
|
|
.get_pauseparam = dsa_user_get_pauseparam,
|
|
.set_pauseparam = dsa_user_set_pauseparam,
|
|
.get_rxnfc = dsa_user_get_rxnfc,
|
|
.set_rxnfc = dsa_user_set_rxnfc,
|
|
.get_ts_info = dsa_user_get_ts_info,
|
|
.self_test = dsa_user_net_selftest,
|
|
.get_mm = dsa_user_get_mm,
|
|
.set_mm = dsa_user_set_mm,
|
|
.get_mm_stats = dsa_user_get_mm_stats,
|
|
};
|
|
|
|
static const struct dcbnl_rtnl_ops __maybe_unused dsa_user_dcbnl_ops = {
|
|
.ieee_setapp = dsa_user_dcbnl_ieee_setapp,
|
|
.ieee_delapp = dsa_user_dcbnl_ieee_delapp,
|
|
};
|
|
|
|
static void dsa_user_get_stats64(struct net_device *dev,
|
|
struct rtnl_link_stats64 *s)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ds->ops->get_stats64)
|
|
ds->ops->get_stats64(ds, dp->index, s);
|
|
else
|
|
dev_get_tstats64(dev, s);
|
|
}
|
|
|
|
static int dsa_user_fill_forward_path(struct net_device_path_ctx *ctx,
|
|
struct net_device_path *path)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(ctx->dev);
|
|
struct net_device *conduit = dsa_port_to_conduit(dp);
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
path->dev = ctx->dev;
|
|
path->type = DEV_PATH_DSA;
|
|
path->dsa.proto = cpu_dp->tag_ops->proto;
|
|
path->dsa.port = dp->index;
|
|
ctx->dev = conduit;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops dsa_user_netdev_ops = {
|
|
.ndo_open = dsa_user_open,
|
|
.ndo_stop = dsa_user_close,
|
|
.ndo_start_xmit = dsa_user_xmit,
|
|
.ndo_change_rx_flags = dsa_user_change_rx_flags,
|
|
.ndo_set_rx_mode = dsa_user_set_rx_mode,
|
|
.ndo_set_mac_address = dsa_user_set_mac_address,
|
|
.ndo_fdb_dump = dsa_user_fdb_dump,
|
|
.ndo_eth_ioctl = dsa_user_ioctl,
|
|
.ndo_get_iflink = dsa_user_get_iflink,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_netpoll_setup = dsa_user_netpoll_setup,
|
|
.ndo_netpoll_cleanup = dsa_user_netpoll_cleanup,
|
|
.ndo_poll_controller = dsa_user_poll_controller,
|
|
#endif
|
|
.ndo_setup_tc = dsa_user_setup_tc,
|
|
.ndo_get_stats64 = dsa_user_get_stats64,
|
|
.ndo_vlan_rx_add_vid = dsa_user_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = dsa_user_vlan_rx_kill_vid,
|
|
.ndo_change_mtu = dsa_user_change_mtu,
|
|
.ndo_fill_forward_path = dsa_user_fill_forward_path,
|
|
};
|
|
|
|
static struct device_type dsa_type = {
|
|
.name = "dsa",
|
|
};
|
|
|
|
void dsa_port_phylink_mac_change(struct dsa_switch *ds, int port, bool up)
|
|
{
|
|
const struct dsa_port *dp = dsa_to_port(ds, port);
|
|
|
|
if (dp->pl)
|
|
phylink_mac_change(dp->pl, up);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_change);
|
|
|
|
static void dsa_user_phylink_fixed_state(struct phylink_config *config,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
/* No need to check that this operation is valid, the callback would
|
|
* not be called if it was not.
|
|
*/
|
|
ds->ops->phylink_fixed_state(ds, dp->index, state);
|
|
}
|
|
|
|
/* user device setup *******************************************************/
|
|
static int dsa_user_phy_connect(struct net_device *user_dev, int addr,
|
|
u32 flags)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(user_dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
user_dev->phydev = mdiobus_get_phy(ds->user_mii_bus, addr);
|
|
if (!user_dev->phydev) {
|
|
netdev_err(user_dev, "no phy at %d\n", addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
user_dev->phydev->dev_flags |= flags;
|
|
|
|
return phylink_connect_phy(dp->pl, user_dev->phydev);
|
|
}
|
|
|
|
static int dsa_user_phy_setup(struct net_device *user_dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(user_dev);
|
|
struct device_node *port_dn = dp->dn;
|
|
struct dsa_switch *ds = dp->ds;
|
|
u32 phy_flags = 0;
|
|
int ret;
|
|
|
|
dp->pl_config.dev = &user_dev->dev;
|
|
dp->pl_config.type = PHYLINK_NETDEV;
|
|
|
|
/* The get_fixed_state callback takes precedence over polling the
|
|
* link GPIO in PHYLINK (see phylink_get_fixed_state). Only set
|
|
* this if the switch provides such a callback.
|
|
*/
|
|
if (ds->ops->phylink_fixed_state) {
|
|
dp->pl_config.get_fixed_state = dsa_user_phylink_fixed_state;
|
|
dp->pl_config.poll_fixed_state = true;
|
|
}
|
|
|
|
ret = dsa_port_phylink_create(dp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ds->ops->get_phy_flags)
|
|
phy_flags = ds->ops->get_phy_flags(ds, dp->index);
|
|
|
|
ret = phylink_of_phy_connect(dp->pl, port_dn, phy_flags);
|
|
if (ret == -ENODEV && ds->user_mii_bus) {
|
|
/* We could not connect to a designated PHY or SFP, so try to
|
|
* use the switch internal MDIO bus instead
|
|
*/
|
|
ret = dsa_user_phy_connect(user_dev, dp->index, phy_flags);
|
|
}
|
|
if (ret) {
|
|
netdev_err(user_dev, "failed to connect to PHY: %pe\n",
|
|
ERR_PTR(ret));
|
|
dsa_port_phylink_destroy(dp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
void dsa_user_setup_tagger(struct net_device *user)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(user);
|
|
struct net_device *conduit = dsa_port_to_conduit(dp);
|
|
struct dsa_user_priv *p = netdev_priv(user);
|
|
const struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
const struct dsa_switch *ds = dp->ds;
|
|
|
|
user->needed_headroom = cpu_dp->tag_ops->needed_headroom;
|
|
user->needed_tailroom = cpu_dp->tag_ops->needed_tailroom;
|
|
/* Try to save one extra realloc later in the TX path (in the conduit)
|
|
* by also inheriting the conduit's needed headroom and tailroom.
|
|
* The 8021q driver also does this.
|
|
*/
|
|
user->needed_headroom += conduit->needed_headroom;
|
|
user->needed_tailroom += conduit->needed_tailroom;
|
|
|
|
p->xmit = cpu_dp->tag_ops->xmit;
|
|
|
|
user->features = conduit->vlan_features | NETIF_F_HW_TC;
|
|
user->hw_features |= NETIF_F_HW_TC;
|
|
user->features |= NETIF_F_LLTX;
|
|
if (user->needed_tailroom)
|
|
user->features &= ~(NETIF_F_SG | NETIF_F_FRAGLIST);
|
|
if (ds->needs_standalone_vlan_filtering)
|
|
user->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
}
|
|
|
|
int dsa_user_suspend(struct net_device *user_dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(user_dev);
|
|
|
|
if (!netif_running(user_dev))
|
|
return 0;
|
|
|
|
netif_device_detach(user_dev);
|
|
|
|
rtnl_lock();
|
|
phylink_stop(dp->pl);
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_user_resume(struct net_device *user_dev)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(user_dev);
|
|
|
|
if (!netif_running(user_dev))
|
|
return 0;
|
|
|
|
netif_device_attach(user_dev);
|
|
|
|
rtnl_lock();
|
|
phylink_start(dp->pl);
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_user_create(struct dsa_port *port)
|
|
{
|
|
struct net_device *conduit = dsa_port_to_conduit(port);
|
|
struct dsa_switch *ds = port->ds;
|
|
struct net_device *user_dev;
|
|
struct dsa_user_priv *p;
|
|
const char *name;
|
|
int assign_type;
|
|
int ret;
|
|
|
|
if (!ds->num_tx_queues)
|
|
ds->num_tx_queues = 1;
|
|
|
|
if (port->name) {
|
|
name = port->name;
|
|
assign_type = NET_NAME_PREDICTABLE;
|
|
} else {
|
|
name = "eth%d";
|
|
assign_type = NET_NAME_ENUM;
|
|
}
|
|
|
|
user_dev = alloc_netdev_mqs(sizeof(struct dsa_user_priv), name,
|
|
assign_type, ether_setup,
|
|
ds->num_tx_queues, 1);
|
|
if (user_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
user_dev->rtnl_link_ops = &dsa_link_ops;
|
|
user_dev->ethtool_ops = &dsa_user_ethtool_ops;
|
|
#if IS_ENABLED(CONFIG_DCB)
|
|
user_dev->dcbnl_ops = &dsa_user_dcbnl_ops;
|
|
#endif
|
|
if (!is_zero_ether_addr(port->mac))
|
|
eth_hw_addr_set(user_dev, port->mac);
|
|
else
|
|
eth_hw_addr_inherit(user_dev, conduit);
|
|
user_dev->priv_flags |= IFF_NO_QUEUE;
|
|
if (dsa_switch_supports_uc_filtering(ds))
|
|
user_dev->priv_flags |= IFF_UNICAST_FLT;
|
|
user_dev->netdev_ops = &dsa_user_netdev_ops;
|
|
if (ds->ops->port_max_mtu)
|
|
user_dev->max_mtu = ds->ops->port_max_mtu(ds, port->index);
|
|
SET_NETDEV_DEVTYPE(user_dev, &dsa_type);
|
|
|
|
SET_NETDEV_DEV(user_dev, port->ds->dev);
|
|
SET_NETDEV_DEVLINK_PORT(user_dev, &port->devlink_port);
|
|
user_dev->dev.of_node = port->dn;
|
|
user_dev->vlan_features = conduit->vlan_features;
|
|
|
|
p = netdev_priv(user_dev);
|
|
user_dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
|
|
if (!user_dev->tstats) {
|
|
free_netdev(user_dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = gro_cells_init(&p->gcells, user_dev);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
p->dp = port;
|
|
INIT_LIST_HEAD(&p->mall_tc_list);
|
|
port->user = user_dev;
|
|
dsa_user_setup_tagger(user_dev);
|
|
|
|
netif_carrier_off(user_dev);
|
|
|
|
ret = dsa_user_phy_setup(user_dev);
|
|
if (ret) {
|
|
netdev_err(user_dev,
|
|
"error %d setting up PHY for tree %d, switch %d, port %d\n",
|
|
ret, ds->dst->index, ds->index, port->index);
|
|
goto out_gcells;
|
|
}
|
|
|
|
rtnl_lock();
|
|
|
|
ret = dsa_user_change_mtu(user_dev, ETH_DATA_LEN);
|
|
if (ret && ret != -EOPNOTSUPP)
|
|
dev_warn(ds->dev, "nonfatal error %d setting MTU to %d on port %d\n",
|
|
ret, ETH_DATA_LEN, port->index);
|
|
|
|
ret = register_netdevice(user_dev);
|
|
if (ret) {
|
|
netdev_err(conduit, "error %d registering interface %s\n",
|
|
ret, user_dev->name);
|
|
rtnl_unlock();
|
|
goto out_phy;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_DCB)) {
|
|
ret = dsa_user_dcbnl_init(user_dev);
|
|
if (ret) {
|
|
netdev_err(user_dev,
|
|
"failed to initialize DCB: %pe\n",
|
|
ERR_PTR(ret));
|
|
rtnl_unlock();
|
|
goto out_unregister;
|
|
}
|
|
}
|
|
|
|
ret = netdev_upper_dev_link(conduit, user_dev, NULL);
|
|
|
|
rtnl_unlock();
|
|
|
|
if (ret)
|
|
goto out_unregister;
|
|
|
|
return 0;
|
|
|
|
out_unregister:
|
|
unregister_netdev(user_dev);
|
|
out_phy:
|
|
rtnl_lock();
|
|
phylink_disconnect_phy(p->dp->pl);
|
|
rtnl_unlock();
|
|
dsa_port_phylink_destroy(p->dp);
|
|
out_gcells:
|
|
gro_cells_destroy(&p->gcells);
|
|
out_free:
|
|
free_percpu(user_dev->tstats);
|
|
free_netdev(user_dev);
|
|
port->user = NULL;
|
|
return ret;
|
|
}
|
|
|
|
void dsa_user_destroy(struct net_device *user_dev)
|
|
{
|
|
struct net_device *conduit = dsa_user_to_conduit(user_dev);
|
|
struct dsa_port *dp = dsa_user_to_port(user_dev);
|
|
struct dsa_user_priv *p = netdev_priv(user_dev);
|
|
|
|
netif_carrier_off(user_dev);
|
|
rtnl_lock();
|
|
netdev_upper_dev_unlink(conduit, user_dev);
|
|
unregister_netdevice(user_dev);
|
|
phylink_disconnect_phy(dp->pl);
|
|
rtnl_unlock();
|
|
|
|
dsa_port_phylink_destroy(dp);
|
|
gro_cells_destroy(&p->gcells);
|
|
free_percpu(user_dev->tstats);
|
|
free_netdev(user_dev);
|
|
}
|
|
|
|
int dsa_user_change_conduit(struct net_device *dev, struct net_device *conduit,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct net_device *old_conduit = dsa_user_to_conduit(dev);
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct net_device *upper;
|
|
struct list_head *iter;
|
|
int err;
|
|
|
|
if (conduit == old_conduit)
|
|
return 0;
|
|
|
|
if (!ds->ops->port_change_conduit) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Driver does not support changing DSA conduit");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (!netdev_uses_dsa(conduit)) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Interface not eligible as DSA conduit");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
netdev_for_each_upper_dev_rcu(conduit, upper, iter) {
|
|
if (dsa_user_dev_check(upper))
|
|
continue;
|
|
if (netif_is_bridge_master(upper))
|
|
continue;
|
|
NL_SET_ERR_MSG_MOD(extack, "Cannot join conduit with unknown uppers");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* Since we allow live-changing the DSA conduit, plus we auto-open the
|
|
* DSA conduit when the user port opens => we need to ensure that the
|
|
* new DSA conduit is open too.
|
|
*/
|
|
if (dev->flags & IFF_UP) {
|
|
err = dev_open(conduit, extack);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
netdev_upper_dev_unlink(old_conduit, dev);
|
|
|
|
err = netdev_upper_dev_link(conduit, dev, extack);
|
|
if (err)
|
|
goto out_revert_old_conduit_unlink;
|
|
|
|
err = dsa_port_change_conduit(dp, conduit, extack);
|
|
if (err)
|
|
goto out_revert_conduit_link;
|
|
|
|
/* Update the MTU of the new CPU port through cross-chip notifiers */
|
|
err = dsa_user_change_mtu(dev, dev->mtu);
|
|
if (err && err != -EOPNOTSUPP) {
|
|
netdev_warn(dev,
|
|
"nonfatal error updating MTU with new conduit: %pe\n",
|
|
ERR_PTR(err));
|
|
}
|
|
|
|
/* If the port doesn't have its own MAC address and relies on the DSA
|
|
* conduit's one, inherit it again from the new DSA conduit.
|
|
*/
|
|
if (is_zero_ether_addr(dp->mac))
|
|
eth_hw_addr_inherit(dev, conduit);
|
|
|
|
return 0;
|
|
|
|
out_revert_conduit_link:
|
|
netdev_upper_dev_unlink(conduit, dev);
|
|
out_revert_old_conduit_unlink:
|
|
netdev_upper_dev_link(old_conduit, dev, NULL);
|
|
return err;
|
|
}
|
|
|
|
bool dsa_user_dev_check(const struct net_device *dev)
|
|
{
|
|
return dev->netdev_ops == &dsa_user_netdev_ops;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_user_dev_check);
|
|
|
|
static int dsa_user_changeupper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct netlink_ext_ack *extack;
|
|
int err = NOTIFY_DONE;
|
|
struct dsa_port *dp;
|
|
|
|
if (!dsa_user_dev_check(dev))
|
|
return err;
|
|
|
|
dp = dsa_user_to_port(dev);
|
|
extack = netdev_notifier_info_to_extack(&info->info);
|
|
|
|
if (netif_is_bridge_master(info->upper_dev)) {
|
|
if (info->linking) {
|
|
err = dsa_port_bridge_join(dp, info->upper_dev, extack);
|
|
if (!err)
|
|
dsa_bridge_mtu_normalization(dp);
|
|
if (err == -EOPNOTSUPP) {
|
|
NL_SET_ERR_MSG_WEAK_MOD(extack,
|
|
"Offloading not supported");
|
|
err = 0;
|
|
}
|
|
err = notifier_from_errno(err);
|
|
} else {
|
|
dsa_port_bridge_leave(dp, info->upper_dev);
|
|
err = NOTIFY_OK;
|
|
}
|
|
} else if (netif_is_lag_master(info->upper_dev)) {
|
|
if (info->linking) {
|
|
err = dsa_port_lag_join(dp, info->upper_dev,
|
|
info->upper_info, extack);
|
|
if (err == -EOPNOTSUPP) {
|
|
NL_SET_ERR_MSG_WEAK_MOD(extack,
|
|
"Offloading not supported");
|
|
err = 0;
|
|
}
|
|
err = notifier_from_errno(err);
|
|
} else {
|
|
dsa_port_lag_leave(dp, info->upper_dev);
|
|
err = NOTIFY_OK;
|
|
}
|
|
} else if (is_hsr_master(info->upper_dev)) {
|
|
if (info->linking) {
|
|
err = dsa_port_hsr_join(dp, info->upper_dev, extack);
|
|
if (err == -EOPNOTSUPP) {
|
|
NL_SET_ERR_MSG_WEAK_MOD(extack,
|
|
"Offloading not supported");
|
|
err = 0;
|
|
}
|
|
err = notifier_from_errno(err);
|
|
} else {
|
|
dsa_port_hsr_leave(dp, info->upper_dev);
|
|
err = NOTIFY_OK;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_prechangeupper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
if (!dsa_user_dev_check(dev))
|
|
return NOTIFY_DONE;
|
|
|
|
dp = dsa_user_to_port(dev);
|
|
|
|
if (netif_is_bridge_master(info->upper_dev) && !info->linking)
|
|
dsa_port_pre_bridge_leave(dp, info->upper_dev);
|
|
else if (netif_is_lag_master(info->upper_dev) && !info->linking)
|
|
dsa_port_pre_lag_leave(dp, info->upper_dev);
|
|
/* dsa_port_pre_hsr_leave is not yet necessary since hsr devices cannot
|
|
* meaningfully placed under a bridge yet
|
|
*/
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int
|
|
dsa_user_lag_changeupper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct net_device *lower;
|
|
struct list_head *iter;
|
|
int err = NOTIFY_DONE;
|
|
struct dsa_port *dp;
|
|
|
|
if (!netif_is_lag_master(dev))
|
|
return err;
|
|
|
|
netdev_for_each_lower_dev(dev, lower, iter) {
|
|
if (!dsa_user_dev_check(lower))
|
|
continue;
|
|
|
|
dp = dsa_user_to_port(lower);
|
|
if (!dp->lag)
|
|
/* Software LAG */
|
|
continue;
|
|
|
|
err = dsa_user_changeupper(lower, info);
|
|
if (notifier_to_errno(err))
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Same as dsa_user_lag_changeupper() except that it calls
|
|
* dsa_user_prechangeupper()
|
|
*/
|
|
static int
|
|
dsa_user_lag_prechangeupper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct net_device *lower;
|
|
struct list_head *iter;
|
|
int err = NOTIFY_DONE;
|
|
struct dsa_port *dp;
|
|
|
|
if (!netif_is_lag_master(dev))
|
|
return err;
|
|
|
|
netdev_for_each_lower_dev(dev, lower, iter) {
|
|
if (!dsa_user_dev_check(lower))
|
|
continue;
|
|
|
|
dp = dsa_user_to_port(lower);
|
|
if (!dp->lag)
|
|
/* Software LAG */
|
|
continue;
|
|
|
|
err = dsa_user_prechangeupper(lower, info);
|
|
if (notifier_to_errno(err))
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
dsa_prevent_bridging_8021q_upper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct netlink_ext_ack *ext_ack;
|
|
struct net_device *user, *br;
|
|
struct dsa_port *dp;
|
|
|
|
ext_ack = netdev_notifier_info_to_extack(&info->info);
|
|
|
|
if (!is_vlan_dev(dev))
|
|
return NOTIFY_DONE;
|
|
|
|
user = vlan_dev_real_dev(dev);
|
|
if (!dsa_user_dev_check(user))
|
|
return NOTIFY_DONE;
|
|
|
|
dp = dsa_user_to_port(user);
|
|
br = dsa_port_bridge_dev_get(dp);
|
|
if (!br)
|
|
return NOTIFY_DONE;
|
|
|
|
/* Deny enslaving a VLAN device into a VLAN-aware bridge */
|
|
if (br_vlan_enabled(br) &&
|
|
netif_is_bridge_master(info->upper_dev) && info->linking) {
|
|
NL_SET_ERR_MSG_MOD(ext_ack,
|
|
"Cannot make VLAN device join VLAN-aware bridge");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int
|
|
dsa_user_check_8021q_upper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct net_device *br = dsa_port_bridge_dev_get(dp);
|
|
struct bridge_vlan_info br_info;
|
|
struct netlink_ext_ack *extack;
|
|
int err = NOTIFY_DONE;
|
|
u16 vid;
|
|
|
|
if (!br || !br_vlan_enabled(br))
|
|
return NOTIFY_DONE;
|
|
|
|
extack = netdev_notifier_info_to_extack(&info->info);
|
|
vid = vlan_dev_vlan_id(info->upper_dev);
|
|
|
|
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
|
|
* device, respectively the VID is not found, returning
|
|
* 0 means success, which is a failure for us here.
|
|
*/
|
|
err = br_vlan_get_info(br, vid, &br_info);
|
|
if (err == 0) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"This VLAN is already configured by the bridge");
|
|
return notifier_from_errno(-EBUSY);
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int
|
|
dsa_user_prechangeupper_sanity_check(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct dsa_switch *ds;
|
|
struct dsa_port *dp;
|
|
int err;
|
|
|
|
if (!dsa_user_dev_check(dev))
|
|
return dsa_prevent_bridging_8021q_upper(dev, info);
|
|
|
|
dp = dsa_user_to_port(dev);
|
|
ds = dp->ds;
|
|
|
|
if (ds->ops->port_prechangeupper) {
|
|
err = ds->ops->port_prechangeupper(ds, dp->index, info);
|
|
if (err)
|
|
return notifier_from_errno(err);
|
|
}
|
|
|
|
if (is_vlan_dev(info->upper_dev))
|
|
return dsa_user_check_8021q_upper(dev, info);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/* To be eligible as a DSA conduit, a LAG must have all lower interfaces be
|
|
* eligible DSA conduits. Additionally, all LAG slaves must be DSA conduits of
|
|
* switches in the same switch tree.
|
|
*/
|
|
static int dsa_lag_conduit_validate(struct net_device *lag_dev,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct net_device *lower1, *lower2;
|
|
struct list_head *iter1, *iter2;
|
|
|
|
netdev_for_each_lower_dev(lag_dev, lower1, iter1) {
|
|
netdev_for_each_lower_dev(lag_dev, lower2, iter2) {
|
|
if (!netdev_uses_dsa(lower1) ||
|
|
!netdev_uses_dsa(lower2)) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"All LAG ports must be eligible as DSA conduits");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
|
|
if (lower1 == lower2)
|
|
continue;
|
|
|
|
if (!dsa_port_tree_same(lower1->dsa_ptr,
|
|
lower2->dsa_ptr)) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"LAG contains DSA conduits of disjoint switch trees");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
}
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int
|
|
dsa_conduit_prechangeupper_sanity_check(struct net_device *conduit,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(&info->info);
|
|
|
|
if (!netdev_uses_dsa(conduit))
|
|
return NOTIFY_DONE;
|
|
|
|
if (!info->linking)
|
|
return NOTIFY_DONE;
|
|
|
|
/* Allow DSA switch uppers */
|
|
if (dsa_user_dev_check(info->upper_dev))
|
|
return NOTIFY_DONE;
|
|
|
|
/* Allow bridge uppers of DSA conduits, subject to further
|
|
* restrictions in dsa_bridge_prechangelower_sanity_check()
|
|
*/
|
|
if (netif_is_bridge_master(info->upper_dev))
|
|
return NOTIFY_DONE;
|
|
|
|
/* Allow LAG uppers, subject to further restrictions in
|
|
* dsa_lag_conduit_prechangelower_sanity_check()
|
|
*/
|
|
if (netif_is_lag_master(info->upper_dev))
|
|
return dsa_lag_conduit_validate(info->upper_dev, extack);
|
|
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"DSA conduit cannot join unknown upper interfaces");
|
|
return notifier_from_errno(-EBUSY);
|
|
}
|
|
|
|
static int
|
|
dsa_lag_conduit_prechangelower_sanity_check(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(&info->info);
|
|
struct net_device *lag_dev = info->upper_dev;
|
|
struct net_device *lower;
|
|
struct list_head *iter;
|
|
|
|
if (!netdev_uses_dsa(lag_dev) || !netif_is_lag_master(lag_dev))
|
|
return NOTIFY_DONE;
|
|
|
|
if (!info->linking)
|
|
return NOTIFY_DONE;
|
|
|
|
if (!netdev_uses_dsa(dev)) {
|
|
NL_SET_ERR_MSG(extack,
|
|
"Only DSA conduits can join a LAG DSA conduit");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
|
|
netdev_for_each_lower_dev(lag_dev, lower, iter) {
|
|
if (!dsa_port_tree_same(dev->dsa_ptr, lower->dsa_ptr)) {
|
|
NL_SET_ERR_MSG(extack,
|
|
"Interface is DSA conduit for a different switch tree than this LAG");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/* Don't allow bridging of DSA conduits, since the bridge layer rx_handler
|
|
* prevents the DSA fake ethertype handler to be invoked, so we don't get the
|
|
* chance to strip off and parse the DSA switch tag protocol header (the bridge
|
|
* layer just returns RX_HANDLER_CONSUMED, stopping RX processing for these
|
|
* frames).
|
|
* The only case where that would not be an issue is when bridging can already
|
|
* be offloaded, such as when the DSA conduit is itself a DSA or plain switchdev
|
|
* port, and is bridged only with other ports from the same hardware device.
|
|
*/
|
|
static int
|
|
dsa_bridge_prechangelower_sanity_check(struct net_device *new_lower,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct net_device *br = info->upper_dev;
|
|
struct netlink_ext_ack *extack;
|
|
struct net_device *lower;
|
|
struct list_head *iter;
|
|
|
|
if (!netif_is_bridge_master(br))
|
|
return NOTIFY_DONE;
|
|
|
|
if (!info->linking)
|
|
return NOTIFY_DONE;
|
|
|
|
extack = netdev_notifier_info_to_extack(&info->info);
|
|
|
|
netdev_for_each_lower_dev(br, lower, iter) {
|
|
if (!netdev_uses_dsa(new_lower) && !netdev_uses_dsa(lower))
|
|
continue;
|
|
|
|
if (!netdev_port_same_parent_id(lower, new_lower)) {
|
|
NL_SET_ERR_MSG(extack,
|
|
"Cannot do software bridging with a DSA conduit");
|
|
return notifier_from_errno(-EINVAL);
|
|
}
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static void dsa_tree_migrate_ports_from_lag_conduit(struct dsa_switch_tree *dst,
|
|
struct net_device *lag_dev)
|
|
{
|
|
struct net_device *new_conduit = dsa_tree_find_first_conduit(dst);
|
|
struct dsa_port *dp;
|
|
int err;
|
|
|
|
dsa_tree_for_each_user_port(dp, dst) {
|
|
if (dsa_port_to_conduit(dp) != lag_dev)
|
|
continue;
|
|
|
|
err = dsa_user_change_conduit(dp->user, new_conduit, NULL);
|
|
if (err) {
|
|
netdev_err(dp->user,
|
|
"failed to restore conduit to %s: %pe\n",
|
|
new_conduit->name, ERR_PTR(err));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int dsa_conduit_lag_join(struct net_device *conduit,
|
|
struct net_device *lag_dev,
|
|
struct netdev_lag_upper_info *uinfo,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_port *cpu_dp = conduit->dsa_ptr;
|
|
struct dsa_switch_tree *dst = cpu_dp->dst;
|
|
struct dsa_port *dp;
|
|
int err;
|
|
|
|
err = dsa_conduit_lag_setup(lag_dev, cpu_dp, uinfo, extack);
|
|
if (err)
|
|
return err;
|
|
|
|
dsa_tree_for_each_user_port(dp, dst) {
|
|
if (dsa_port_to_conduit(dp) != conduit)
|
|
continue;
|
|
|
|
err = dsa_user_change_conduit(dp->user, lag_dev, extack);
|
|
if (err)
|
|
goto restore;
|
|
}
|
|
|
|
return 0;
|
|
|
|
restore:
|
|
dsa_tree_for_each_user_port_continue_reverse(dp, dst) {
|
|
if (dsa_port_to_conduit(dp) != lag_dev)
|
|
continue;
|
|
|
|
err = dsa_user_change_conduit(dp->user, conduit, NULL);
|
|
if (err) {
|
|
netdev_err(dp->user,
|
|
"failed to restore conduit to %s: %pe\n",
|
|
conduit->name, ERR_PTR(err));
|
|
}
|
|
}
|
|
|
|
dsa_conduit_lag_teardown(lag_dev, conduit->dsa_ptr);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_conduit_lag_leave(struct net_device *conduit,
|
|
struct net_device *lag_dev)
|
|
{
|
|
struct dsa_port *dp, *cpu_dp = lag_dev->dsa_ptr;
|
|
struct dsa_switch_tree *dst = cpu_dp->dst;
|
|
struct dsa_port *new_cpu_dp = NULL;
|
|
struct net_device *lower;
|
|
struct list_head *iter;
|
|
|
|
netdev_for_each_lower_dev(lag_dev, lower, iter) {
|
|
if (netdev_uses_dsa(lower)) {
|
|
new_cpu_dp = lower->dsa_ptr;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (new_cpu_dp) {
|
|
/* Update the CPU port of the user ports still under the LAG
|
|
* so that dsa_port_to_conduit() continues to work properly
|
|
*/
|
|
dsa_tree_for_each_user_port(dp, dst)
|
|
if (dsa_port_to_conduit(dp) == lag_dev)
|
|
dp->cpu_dp = new_cpu_dp;
|
|
|
|
/* Update the index of the virtual CPU port to match the lowest
|
|
* physical CPU port
|
|
*/
|
|
lag_dev->dsa_ptr = new_cpu_dp;
|
|
wmb();
|
|
} else {
|
|
/* If the LAG DSA conduit has no ports left, migrate back all
|
|
* user ports to the first physical CPU port
|
|
*/
|
|
dsa_tree_migrate_ports_from_lag_conduit(dst, lag_dev);
|
|
}
|
|
|
|
/* This DSA conduit has left its LAG in any case, so let
|
|
* the CPU port leave the hardware LAG as well
|
|
*/
|
|
dsa_conduit_lag_teardown(lag_dev, conduit->dsa_ptr);
|
|
}
|
|
|
|
static int dsa_conduit_changeupper(struct net_device *dev,
|
|
struct netdev_notifier_changeupper_info *info)
|
|
{
|
|
struct netlink_ext_ack *extack;
|
|
int err = NOTIFY_DONE;
|
|
|
|
if (!netdev_uses_dsa(dev))
|
|
return err;
|
|
|
|
extack = netdev_notifier_info_to_extack(&info->info);
|
|
|
|
if (netif_is_lag_master(info->upper_dev)) {
|
|
if (info->linking) {
|
|
err = dsa_conduit_lag_join(dev, info->upper_dev,
|
|
info->upper_info, extack);
|
|
err = notifier_from_errno(err);
|
|
} else {
|
|
dsa_conduit_lag_leave(dev, info->upper_dev);
|
|
err = NOTIFY_OK;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_user_netdevice_event(struct notifier_block *nb,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
|
|
|
|
switch (event) {
|
|
case NETDEV_PRECHANGEUPPER: {
|
|
struct netdev_notifier_changeupper_info *info = ptr;
|
|
int err;
|
|
|
|
err = dsa_user_prechangeupper_sanity_check(dev, info);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_conduit_prechangeupper_sanity_check(dev, info);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_lag_conduit_prechangelower_sanity_check(dev, info);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_bridge_prechangelower_sanity_check(dev, info);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_user_prechangeupper(dev, ptr);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_user_lag_prechangeupper(dev, ptr);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
break;
|
|
}
|
|
case NETDEV_CHANGEUPPER: {
|
|
int err;
|
|
|
|
err = dsa_user_changeupper(dev, ptr);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_user_lag_changeupper(dev, ptr);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
err = dsa_conduit_changeupper(dev, ptr);
|
|
if (notifier_to_errno(err))
|
|
return err;
|
|
|
|
break;
|
|
}
|
|
case NETDEV_CHANGELOWERSTATE: {
|
|
struct netdev_notifier_changelowerstate_info *info = ptr;
|
|
struct dsa_port *dp;
|
|
int err = 0;
|
|
|
|
if (dsa_user_dev_check(dev)) {
|
|
dp = dsa_user_to_port(dev);
|
|
|
|
err = dsa_port_lag_change(dp, info->lower_state_info);
|
|
}
|
|
|
|
/* Mirror LAG port events on DSA conduits that are in
|
|
* a LAG towards their respective switch CPU ports
|
|
*/
|
|
if (netdev_uses_dsa(dev)) {
|
|
dp = dev->dsa_ptr;
|
|
|
|
err = dsa_port_lag_change(dp, info->lower_state_info);
|
|
}
|
|
|
|
return notifier_from_errno(err);
|
|
}
|
|
case NETDEV_CHANGE:
|
|
case NETDEV_UP: {
|
|
/* Track state of conduit port.
|
|
* DSA driver may require the conduit port (and indirectly
|
|
* the tagger) to be available for some special operation.
|
|
*/
|
|
if (netdev_uses_dsa(dev)) {
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch_tree *dst = cpu_dp->ds->dst;
|
|
|
|
/* Track when the conduit port is UP */
|
|
dsa_tree_conduit_oper_state_change(dst, dev,
|
|
netif_oper_up(dev));
|
|
|
|
/* Track when the conduit port is ready and can accept
|
|
* packet.
|
|
* NETDEV_UP event is not enough to flag a port as ready.
|
|
* We also have to wait for linkwatch_do_dev to dev_activate
|
|
* and emit a NETDEV_CHANGE event.
|
|
* We check if a conduit port is ready by checking if the dev
|
|
* have a qdisc assigned and is not noop.
|
|
*/
|
|
dsa_tree_conduit_admin_state_change(dst, dev,
|
|
!qdisc_tx_is_noop(dev));
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
case NETDEV_GOING_DOWN: {
|
|
struct dsa_port *dp, *cpu_dp;
|
|
struct dsa_switch_tree *dst;
|
|
LIST_HEAD(close_list);
|
|
|
|
if (!netdev_uses_dsa(dev))
|
|
return NOTIFY_DONE;
|
|
|
|
cpu_dp = dev->dsa_ptr;
|
|
dst = cpu_dp->ds->dst;
|
|
|
|
dsa_tree_conduit_admin_state_change(dst, dev, false);
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (!dsa_port_is_user(dp))
|
|
continue;
|
|
|
|
if (dp->cpu_dp != cpu_dp)
|
|
continue;
|
|
|
|
list_add(&dp->user->close_list, &close_list);
|
|
}
|
|
|
|
dev_close_many(&close_list, true);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static void
|
|
dsa_fdb_offload_notify(struct dsa_switchdev_event_work *switchdev_work)
|
|
{
|
|
struct switchdev_notifier_fdb_info info = {};
|
|
|
|
info.addr = switchdev_work->addr;
|
|
info.vid = switchdev_work->vid;
|
|
info.offloaded = true;
|
|
call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED,
|
|
switchdev_work->orig_dev, &info.info, NULL);
|
|
}
|
|
|
|
static void dsa_user_switchdev_event_work(struct work_struct *work)
|
|
{
|
|
struct dsa_switchdev_event_work *switchdev_work =
|
|
container_of(work, struct dsa_switchdev_event_work, work);
|
|
const unsigned char *addr = switchdev_work->addr;
|
|
struct net_device *dev = switchdev_work->dev;
|
|
u16 vid = switchdev_work->vid;
|
|
struct dsa_switch *ds;
|
|
struct dsa_port *dp;
|
|
int err;
|
|
|
|
dp = dsa_user_to_port(dev);
|
|
ds = dp->ds;
|
|
|
|
switch (switchdev_work->event) {
|
|
case SWITCHDEV_FDB_ADD_TO_DEVICE:
|
|
if (switchdev_work->host_addr)
|
|
err = dsa_port_bridge_host_fdb_add(dp, addr, vid);
|
|
else if (dp->lag)
|
|
err = dsa_port_lag_fdb_add(dp, addr, vid);
|
|
else
|
|
err = dsa_port_fdb_add(dp, addr, vid);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to add %pM vid %d to fdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
break;
|
|
}
|
|
dsa_fdb_offload_notify(switchdev_work);
|
|
break;
|
|
|
|
case SWITCHDEV_FDB_DEL_TO_DEVICE:
|
|
if (switchdev_work->host_addr)
|
|
err = dsa_port_bridge_host_fdb_del(dp, addr, vid);
|
|
else if (dp->lag)
|
|
err = dsa_port_lag_fdb_del(dp, addr, vid);
|
|
else
|
|
err = dsa_port_fdb_del(dp, addr, vid);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"port %d failed to delete %pM vid %d from fdb: %d\n",
|
|
dp->index, addr, vid, err);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
kfree(switchdev_work);
|
|
}
|
|
|
|
static bool dsa_foreign_dev_check(const struct net_device *dev,
|
|
const struct net_device *foreign_dev)
|
|
{
|
|
const struct dsa_port *dp = dsa_user_to_port(dev);
|
|
struct dsa_switch_tree *dst = dp->ds->dst;
|
|
|
|
if (netif_is_bridge_master(foreign_dev))
|
|
return !dsa_tree_offloads_bridge_dev(dst, foreign_dev);
|
|
|
|
if (netif_is_bridge_port(foreign_dev))
|
|
return !dsa_tree_offloads_bridge_port(dst, foreign_dev);
|
|
|
|
/* Everything else is foreign */
|
|
return true;
|
|
}
|
|
|
|
static int dsa_user_fdb_event(struct net_device *dev,
|
|
struct net_device *orig_dev,
|
|
unsigned long event, const void *ctx,
|
|
const struct switchdev_notifier_fdb_info *fdb_info)
|
|
{
|
|
struct dsa_switchdev_event_work *switchdev_work;
|
|
struct dsa_port *dp = dsa_user_to_port(dev);
|
|
bool host_addr = fdb_info->is_local;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (ctx && ctx != dp)
|
|
return 0;
|
|
|
|
if (!dp->bridge)
|
|
return 0;
|
|
|
|
if (switchdev_fdb_is_dynamically_learned(fdb_info)) {
|
|
if (dsa_port_offloads_bridge_port(dp, orig_dev))
|
|
return 0;
|
|
|
|
/* FDB entries learned by the software bridge or by foreign
|
|
* bridge ports should be installed as host addresses only if
|
|
* the driver requests assisted learning.
|
|
*/
|
|
if (!ds->assisted_learning_on_cpu_port)
|
|
return 0;
|
|
}
|
|
|
|
/* Also treat FDB entries on foreign interfaces bridged with us as host
|
|
* addresses.
|
|
*/
|
|
if (dsa_foreign_dev_check(dev, orig_dev))
|
|
host_addr = true;
|
|
|
|
/* Check early that we're not doing work in vain.
|
|
* Host addresses on LAG ports still require regular FDB ops,
|
|
* since the CPU port isn't in a LAG.
|
|
*/
|
|
if (dp->lag && !host_addr) {
|
|
if (!ds->ops->lag_fdb_add || !ds->ops->lag_fdb_del)
|
|
return -EOPNOTSUPP;
|
|
} else {
|
|
if (!ds->ops->port_fdb_add || !ds->ops->port_fdb_del)
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
|
|
if (!switchdev_work)
|
|
return -ENOMEM;
|
|
|
|
netdev_dbg(dev, "%s FDB entry towards %s, addr %pM vid %d%s\n",
|
|
event == SWITCHDEV_FDB_ADD_TO_DEVICE ? "Adding" : "Deleting",
|
|
orig_dev->name, fdb_info->addr, fdb_info->vid,
|
|
host_addr ? " as host address" : "");
|
|
|
|
INIT_WORK(&switchdev_work->work, dsa_user_switchdev_event_work);
|
|
switchdev_work->event = event;
|
|
switchdev_work->dev = dev;
|
|
switchdev_work->orig_dev = orig_dev;
|
|
|
|
ether_addr_copy(switchdev_work->addr, fdb_info->addr);
|
|
switchdev_work->vid = fdb_info->vid;
|
|
switchdev_work->host_addr = host_addr;
|
|
|
|
dsa_schedule_work(&switchdev_work->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called under rcu_read_lock() */
|
|
static int dsa_user_switchdev_event(struct notifier_block *unused,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
|
|
int err;
|
|
|
|
switch (event) {
|
|
case SWITCHDEV_PORT_ATTR_SET:
|
|
err = switchdev_handle_port_attr_set(dev, ptr,
|
|
dsa_user_dev_check,
|
|
dsa_user_port_attr_set);
|
|
return notifier_from_errno(err);
|
|
case SWITCHDEV_FDB_ADD_TO_DEVICE:
|
|
case SWITCHDEV_FDB_DEL_TO_DEVICE:
|
|
err = switchdev_handle_fdb_event_to_device(dev, event, ptr,
|
|
dsa_user_dev_check,
|
|
dsa_foreign_dev_check,
|
|
dsa_user_fdb_event);
|
|
return notifier_from_errno(err);
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int dsa_user_switchdev_blocking_event(struct notifier_block *unused,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
|
|
int err;
|
|
|
|
switch (event) {
|
|
case SWITCHDEV_PORT_OBJ_ADD:
|
|
err = switchdev_handle_port_obj_add_foreign(dev, ptr,
|
|
dsa_user_dev_check,
|
|
dsa_foreign_dev_check,
|
|
dsa_user_port_obj_add);
|
|
return notifier_from_errno(err);
|
|
case SWITCHDEV_PORT_OBJ_DEL:
|
|
err = switchdev_handle_port_obj_del_foreign(dev, ptr,
|
|
dsa_user_dev_check,
|
|
dsa_foreign_dev_check,
|
|
dsa_user_port_obj_del);
|
|
return notifier_from_errno(err);
|
|
case SWITCHDEV_PORT_ATTR_SET:
|
|
err = switchdev_handle_port_attr_set(dev, ptr,
|
|
dsa_user_dev_check,
|
|
dsa_user_port_attr_set);
|
|
return notifier_from_errno(err);
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block dsa_user_nb __read_mostly = {
|
|
.notifier_call = dsa_user_netdevice_event,
|
|
};
|
|
|
|
struct notifier_block dsa_user_switchdev_notifier = {
|
|
.notifier_call = dsa_user_switchdev_event,
|
|
};
|
|
|
|
struct notifier_block dsa_user_switchdev_blocking_notifier = {
|
|
.notifier_call = dsa_user_switchdev_blocking_event,
|
|
};
|
|
|
|
int dsa_user_register_notifier(void)
|
|
{
|
|
struct notifier_block *nb;
|
|
int err;
|
|
|
|
err = register_netdevice_notifier(&dsa_user_nb);
|
|
if (err)
|
|
return err;
|
|
|
|
err = register_switchdev_notifier(&dsa_user_switchdev_notifier);
|
|
if (err)
|
|
goto err_switchdev_nb;
|
|
|
|
nb = &dsa_user_switchdev_blocking_notifier;
|
|
err = register_switchdev_blocking_notifier(nb);
|
|
if (err)
|
|
goto err_switchdev_blocking_nb;
|
|
|
|
return 0;
|
|
|
|
err_switchdev_blocking_nb:
|
|
unregister_switchdev_notifier(&dsa_user_switchdev_notifier);
|
|
err_switchdev_nb:
|
|
unregister_netdevice_notifier(&dsa_user_nb);
|
|
return err;
|
|
}
|
|
|
|
void dsa_user_unregister_notifier(void)
|
|
{
|
|
struct notifier_block *nb;
|
|
int err;
|
|
|
|
nb = &dsa_user_switchdev_blocking_notifier;
|
|
err = unregister_switchdev_blocking_notifier(nb);
|
|
if (err)
|
|
pr_err("DSA: failed to unregister switchdev blocking notifier (%d)\n", err);
|
|
|
|
err = unregister_switchdev_notifier(&dsa_user_switchdev_notifier);
|
|
if (err)
|
|
pr_err("DSA: failed to unregister switchdev notifier (%d)\n", err);
|
|
|
|
err = unregister_netdevice_notifier(&dsa_user_nb);
|
|
if (err)
|
|
pr_err("DSA: failed to unregister user notifier (%d)\n", err);
|
|
}
|