linux/drivers/usb
Ruslan Bilovol 8408fd1d83 usb: musb: implement (un)map_urb_for_dma hooks
MUSB controller cannot work in DMA mode with misaligned buffers,
switching in PIO mode.

HCD core has hooks that allow to override the default DMA
mapping and unmapping routines for host controllers that have
special DMA requirements, such as alignment constraints.

It is observed that work in PIO mode is slow and it's better
to align buffers properly before passing them to MUSB

This increased throughput 80->120 MBits/s over musb@omap4 with
USB Gigabit Ethernet adapter attached.

Some ideas are taken from ehci-tegra.c

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-02 11:42:49 +03:00
..
atm Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea usb: chipidea: udc: don't assign gadget.dev.release directly 2013-03-18 11:17:45 +02:00
class USB: cdc-wdm: fix buffer overflow 2013-03-12 16:33:05 -07:00
core ACPI / glue: Add .match() callback to struct acpi_bus_type 2013-03-04 14:23:40 +01:00
dwc3 usb: dwc3: fix PHY error handling 2013-03-18 11:18:28 +02:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: gadget/uvc: Add support for 'get_unmapped_area' for MMUless architectures 2013-04-02 11:42:49 +03:00
host usb: ehci: mv_ehci: remove unused clock 2013-04-02 11:42:46 +03:00
image
misc USB: altsetting overrides for usbtest 2013-01-31 10:09:19 +01:00
mon mm: kill vma flag VM_RESERVED and mm->reserved_vm counter 2012-10-09 16:22:19 +09:00
musb usb: musb: implement (un)map_urb_for_dma hooks 2013-04-02 11:42:49 +03:00
phy usb: otg: mv_otg: remove unused clock 2013-04-02 11:42:45 +03:00
renesas_usbhs usb: renesas_usbhs: fixup sparse errors for common.c 2013-04-02 11:42:48 +03:00
serial USB: quatech2: only write to the tty if the port is open. 2013-03-13 12:32:47 -07:00
storage USB: storage: fix Huawei mode switching regression 2013-03-07 12:23:17 +08:00
wusbcore USB: wusbcore/wa-xfer: error handling fixes in setup_segs() 2013-02-06 11:38:14 -08:00
Kconfig usb: phy: move all PHY drivers to drivers/usb/phy/ 2013-03-18 11:18:04 +02:00
Makefile usb: phy: remove CONFIG_USB_OTG_UTILS 2013-03-18 11:18:08 +02:00
README
usb-common.c usb: otg: move usb_otg_state_string to usb-common.c 2013-03-18 11:18:03 +02:00
usb-skeleton.c USB: usb-skeleton.c: fix compilation error and restored kref_put on fail in skel_open 2012-10-24 14:40:50 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.