linux/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
Rob Herring 7f464532b0 dt-bindings: Add missing 'additionalProperties: false'
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.

Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.

So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
2020-03-31 09:03:17 -06:00

40 lines
769 B
YAML

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GPIO vibrator
maintainers:
- Luca Weiss <luca@z3ntu.xyz>
description: |+
Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO.
properties:
compatible:
const: gpio-vibrator
enable-gpios:
maxItems: 1
vcc-supply:
description: Regulator that provides power
required:
- compatible
- enable-gpios
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};