Daniel Golle 87c5cbf71e serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
On AR934x this UART is usually not initialized by the bootloader
as it is only used as a secondary serial port while the primary
UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS
hardware flow control, one needs to set the
UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
UART is used as primary/console, the bootloader on AR934x typically
doesn't set those bits.
Setting them explicitely on AR933x should not do any harm, so just
set them unconditionally.

Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10 12:26:44 -08:00
..
2020-02-07 12:51:54 -08:00
2020-01-29 18:53:37 -08:00
2020-02-06 06:11:50 +00:00
2020-02-08 14:04:19 -08:00
2020-02-08 14:04:19 -08:00
2020-02-08 14:17:27 -08:00
2020-02-08 14:17:27 -08:00
2020-02-08 14:04:19 -08:00
2020-02-08 14:04:19 -08:00
2020-02-08 13:58:44 -08:00
2020-01-27 13:03:00 -08:00
2020-02-08 14:04:19 -08:00
2020-02-09 16:05:50 -08:00
2020-01-30 08:04:01 -08:00
2020-02-08 14:04:19 -08:00
2020-02-04 07:17:41 +00:00
2020-01-31 14:40:36 -08:00
2020-02-05 17:49:54 +00:00
2020-02-04 13:06:46 +00:00
2020-02-04 07:17:41 +00:00
2020-02-04 07:17:41 +00:00
2020-01-27 13:03:00 -08:00
2020-02-06 06:15:23 +00:00
2020-02-08 14:04:19 -08:00
2020-01-27 13:03:00 -08:00
2020-02-06 14:17:38 +00:00
2020-02-08 13:55:25 -08:00
2020-02-03 14:51:57 +00:00
2020-02-04 07:17:41 +00:00
2020-02-08 17:24:41 -08:00
2020-02-08 14:04:19 -08:00
2020-01-29 18:16:16 -08:00
2020-01-31 11:28:31 -08:00
2020-02-08 14:04:19 -08:00
2020-02-03 22:22:05 +00:00
2020-02-09 16:05:50 -08:00
2020-01-29 10:35:54 -08:00
2020-01-29 10:35:54 -08:00
2020-02-07 12:30:16 -08:00
2020-02-05 17:44:14 +00:00
2020-02-09 16:05:50 -08:00