Boris BREZILLON 87e2ed338f clk: at91: fix recalc_rate implementation of PLL driver ... Use the cached values to calculate PLL rate instead of the register values. This is required to prevent erroneous PLL rate return when the PLL rate has been configured but the PLL is not prepared yet. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Gaël PORTAY <gael.portay@gmail.com> Tested-by: Gaël PORTAY <gael.portay@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>		2014-09-02 15:37:17 -07:00
..
clk-main.c	clk: at91: main: warn when the main crystal frequency is not set	2014-07-02 09:00:52 -07:00
clk-master.c	clk:at91: Fix memory leak in of_at91_clk_master_setup()	2014-02-26 18:00:56 -08:00
clk-peripheral.c	clk: at91: add PMC peripheral clocks	2013-12-02 15:31:24 +01:00
clk-pll.c	clk: at91: fix recalc_rate implementation of PLL driver	2014-09-02 15:37:17 -07:00
clk-plldiv.c	clk: at91: add PMC pll clocks	2013-12-02 15:31:22 +01:00
clk-programmable.c	clk: at91: optimization of the set_rate callback	2014-03-19 15:22:02 -07:00
clk-slow.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
clk-smd.c	clk: at91: add PMC smd clock	2013-12-02 15:31:25 +01:00
clk-system.c	clk: at91: fix programmable clk irq handling	2014-03-19 15:21:56 -07:00
clk-usb.c	clk: at91: add PMC usb clock	2013-12-02 15:31:25 +01:00
clk-utmi.c	clk: at91: add PMC utmi clock	2013-12-02 15:31:25 +01:00
Makefile	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
pmc.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
pmc.h	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
sckc.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
sckc.h	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00