iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
893911e657
linux/drivers/clk/clk-renesas-pcie.c
Linus Torvalds e81507acdc Nothing looks out of the ordinary in this batch of clk driver updates. There 
are a couple patches to the core clk framework, but they're all basically
 cleanups or debugging aids. The driver updates and new additions are dominated
 in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
 new drivers for various SoCs, and MediaTek gained a bunch of drivers for
 MT8188. The MediaTek drivers are being modernized as well, so there are
 updates all over that vendor's clk drivers. There's also a couple other new clk
 drivers in here, for example the Starfive JH7110 SoC support is added.
 
 Outside of the two major SoC vendors though, we have the usual collection of
 non-critical fixes and cleanups to various clk drivers. It's good to see that
 we're getting more cleanups and modernization patches. Maybe one day we'll be
 able to properly split clk providers from clk consumers.
 
 Core:
  - Print an informational message before disabling unused clks
 
 New Drivers:
  - BCM63268 timer clock and reset controller
  - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
    MT8195 SoCs
  - Mediatek MT8188 SoC clk drivers
  - Clock driver for Sunplus SP7021 SoC
  - Clk driver support for Loongson-2 SoCs
  - Clock driver for Skyworks Si521xx I2C PCIe clock generators
  - Initial Starfive JH7110 clk/reset support
  - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
  - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
 
 Updates:
  - Shrink size of clk_fractional_divider a little
  - Convert various clk drivers to devm_of_clk_add_hw_provider()
  - Convert platform clk drivers to remove_new()
  - Converted most Mediatek clock drivers to struct platform_driver
  - MediaTek clock drivers can be built as modules
  - Reimplement Loongson-1 clk driver with DT support
  - Migrate socfpga clk driver to of_clk_add_hw_provider()
  - Support for i3c clks on Aspeed ast2600 SoCs
  - Add clock generic devm_clk_hw_register_gate_parent_data
  - Add audiomix block control for i.MX8MP
  - Add support for determine_rate to i.MX composite-8m
  - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
  - Provide clock name in error message for clk-gpr-mux on get parent failure
  - Drop duplicate imx_clk_mux_flags macro
  - Register the i.MX8MP Media Disp2 Pix clock as bus clock
  - Add Media LDB root clock to i.MX8MP
  - Make i.MX8MP nand_usdhc_bus clock as non-critical
  - Fix the rate table for i.MX fracn-gppll
  - Disable HW control for the fracn-gppll in order to be controlled by
    register write
  - Add support for interger PLL in fracn-gppll
  - Add mcore_booted module parameter to i.MX93 provider
  - Add NIC, A55 and ARM PLL clocks to i.MX93
  - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
  - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
    get more accurate clock rates
  - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
  - Update some of the i.MX critical clocks flags to allow glitchless
    on-the-fly rate change.
  - Add I2C5 clock on Renesas R-Car V3H
  - Exynos850: Add CMU_G3D clock controller for the Mali GPU
  - Extract Exynos5433 (ARM64) clock controller power management code to
    common driver parts
  - Exynos850: make PMU_ALIVE_PCLK clock critical
  - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
    Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
  - Add video capture (VIN) clocks on Renesas R-Car V3H
  - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
  - Support for Stromer Plus PLL on Qualcomm IPQ5332
  - Add a missing reset to Qualcomm QCM2290
  - Migrate Qualcomm IPQ4019 to clk_parent_data
  - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
    MSM8996 and MSM8998 SoCs
  - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
  - Add two EMAC GDSCs on Qualcomm SC8280XP
  - Use shared rcg clk ops in Qualcomm SM6115 GCC
  - Park Qualcomm SM8350 PCIe PIPE clks when disabled
  - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
  - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
  - Convert some Qualcomm clk DT bindings to YAML
  - Reparenting fix for the clock supplying camera modules on Rockchip rk3399
  - Mark more critical (bus-)clocks on Rockchip rk3588
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmRMbQURHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUvyw//Vcqg0h8s+9npz0JsW+nffAXRguy1jum6
 tj10++zA+NBhKxmfhyOs/v9UK1nb2DXAhcTIjUDcTDkVy0b2pBUQoGEGMyy9TLve
 q4MfWx7CwKwASUG2Lr3f1n4qi/vT4PEDlvYzUO94p7c6Y6f6P4JHTCJlJR7cNb4o
 MyXgiXMxQGaxT0XucSR9J32VxqSbF9KQvb8q+tPV3CDMIWi96aO5ZyewY6KF8a/7
 chdXKYQXaYYG4/q4lNjZuvNQ2jidWqp0NlNw7M96U7SK5ESBryk4B4d1/J+QtzxX
 cuBTF1eoTKYlS3kPhhsuOhbsDi2SFE6D75ps5i9Y57ezSdS9qFcUsaNzUiN6t9ng
 uW+MRBTz20JDKBTLk6vD75O63fVDg3KG+kkLaF0Ax1Xa99sbrgBdNkPQ0Iu2AbSh
 assUmbz3s9MaPWj8LpOKLmactm4GbrQ2wtCEjguuynjaFoPUuyunReNkZ1yxfUUl
 MjRIYpvqVvYp29xHlBjN2cgttHjqVCBg8y7Io6RQonbIvnuN7Zo2cu+vbF7w7mdR
 2HtGBe/OFsnZmmsr0pIGQOU25otheIHPudEYLlXEKx03FaMzAXnnDe9f6xXWaWxk
 Wz0YBofejlkP9ycLjRas2BZo3T66TtAlbQH2UhrSpJZV02Jwfi+JwBaLi9dOwZ7O
 VL5HI5FSlG8=
 =bTtL
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...
2023-04-29 17:29:39 -07:00

424 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for Renesas 9-series PCIe clock generator driver
*
* The following series can be supported:
* - 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ
* Currently supported:
* - 9FGV0241
* - 9FGV0441
*
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
*/
#include <linux/clk-provider.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#define RS9_REG_OE 0x0
#define RS9_REG_SS 0x1
#define RS9_REG_SS_AMP_0V6 0x0
#define RS9_REG_SS_AMP_0V7 0x1
#define RS9_REG_SS_AMP_0V8 0x2
#define RS9_REG_SS_AMP_0V9 0x3
#define RS9_REG_SS_AMP_MASK 0x3
#define RS9_REG_SS_SSC_100 0
#define RS9_REG_SS_SSC_M025 (1 << 3)
#define RS9_REG_SS_SSC_M050 (3 << 3)
#define RS9_REG_SS_SSC_MASK (3 << 3)
#define RS9_REG_SS_SSC_LOCK BIT(5)
#define RS9_REG_SR 0x2
#define RS9_REG_REF 0x3
#define RS9_REG_REF_OE BIT(4)
#define RS9_REG_REF_OD BIT(5)
#define RS9_REG_REF_SR_SLOWEST 0
#define RS9_REG_REF_SR_SLOW (1 << 6)
#define RS9_REG_REF_SR_FAST (2 << 6)
#define RS9_REG_REF_SR_FASTER (3 << 6)
#define RS9_REG_VID 0x5
#define RS9_REG_DID 0x6
#define RS9_REG_BCP 0x7
#define RS9_REG_VID_IDT 0x01
#define RS9_REG_DID_TYPE_FGV (0x0 << RS9_REG_DID_TYPE_SHIFT)
#define RS9_REG_DID_TYPE_DBV (0x1 << RS9_REG_DID_TYPE_SHIFT)
#define RS9_REG_DID_TYPE_DMV (0x2 << RS9_REG_DID_TYPE_SHIFT)
#define RS9_REG_DID_TYPE_SHIFT 0x6
/* Supported Renesas 9-series models. */
enum rs9_model {
RENESAS_9FGV0241,
RENESAS_9FGV0441,
};
/* Structure to describe features of a particular 9-series model */
struct rs9_chip_info {
const enum rs9_model model;
unsigned int num_clks;
u8 did;
};
struct rs9_driver_data {
struct i2c_client *client;
struct regmap *regmap;
const struct rs9_chip_info *chip_info;
struct clk_hw *clk_dif[4];
u8 pll_amplitude;
u8 pll_ssc;
u8 clk_dif_sr;
};
/*
* Renesas 9-series i2c regmap
*/
static const struct regmap_range rs9_readable_ranges[] = {
regmap_reg_range(RS9_REG_OE, RS9_REG_REF),
regmap_reg_range(RS9_REG_VID, RS9_REG_BCP),
};
static const struct regmap_access_table rs9_readable_table = {
.yes_ranges = rs9_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(rs9_readable_ranges),
};
static const struct regmap_range rs9_writeable_ranges[] = {
regmap_reg_range(RS9_REG_OE, RS9_REG_REF),
regmap_reg_range(RS9_REG_BCP, RS9_REG_BCP),
};
static const struct regmap_access_table rs9_writeable_table = {
.yes_ranges = rs9_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(rs9_writeable_ranges),
};
static int rs9_regmap_i2c_write(void *context,
unsigned int reg, unsigned int val)
{
struct i2c_client *i2c = context;
const u8 data[3] = { reg, 1, val };
const int count = ARRAY_SIZE(data);
int ret;
ret = i2c_master_send(i2c, data, count);
if (ret == count)
return 0;
else if (ret < 0)
return ret;
else
return -EIO;
}
static int rs9_regmap_i2c_read(void *context,
unsigned int reg, unsigned int *val)
{
struct i2c_client *i2c = context;
struct i2c_msg xfer[2];
u8 txdata = reg;
u8 rxdata[2];
int ret;
xfer[0].addr = i2c->addr;
xfer[0].flags = 0;
xfer[0].len = 1;
xfer[0].buf = (void *)&txdata;
xfer[1].addr = i2c->addr;
xfer[1].flags = I2C_M_RD;
xfer[1].len = 2;
xfer[1].buf = (void *)rxdata;
ret = i2c_transfer(i2c->adapter, xfer, 2);
if (ret < 0)
return ret;
if (ret != 2)
return -EIO;
/*
* Byte 0 is transfer length, which is always 1 due
* to BCP register programming to 1 in rs9_probe(),
* ignore it and use data from Byte 1.
*/
*val = rxdata[1];
return 0;
}
static const struct regmap_config rs9_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_FLAT,
.max_register = RS9_REG_BCP,
.num_reg_defaults_raw = 0x8,
.rd_table = &rs9_readable_table,
.wr_table = &rs9_writeable_table,
.reg_write = rs9_regmap_i2c_write,
.reg_read = rs9_regmap_i2c_read,
};
static u8 rs9_calc_dif(const struct rs9_driver_data *rs9, int idx)
{
enum rs9_model model = rs9->chip_info->model;
if (model == RENESAS_9FGV0241)
return BIT(idx) + 1;
else if (model == RENESAS_9FGV0441)
return BIT(idx);
return 0;
}
static int rs9_get_output_config(struct rs9_driver_data *rs9, int idx)
{
struct i2c_client *client = rs9->client;
u8 dif = rs9_calc_dif(rs9, idx);
unsigned char name[5] = "DIF0";
struct device_node *np;
int ret;
u32 sr;
/* Set defaults */
rs9->clk_dif_sr |= dif;
snprintf(name, 5, "DIF%d", idx);
np = of_get_child_by_name(client->dev.of_node, name);
if (!np)
return 0;
/* Output clock slew rate */
ret = of_property_read_u32(np, "renesas,slew-rate", &sr);
of_node_put(np);
if (!ret) {
if (sr == 2000000) { /* 2V/ns */
rs9->clk_dif_sr &= ~dif;
} else if (sr == 3000000) { /* 3V/ns (default) */
rs9->clk_dif_sr |= dif;
} else
ret = dev_err_probe(&client->dev, -EINVAL,
"Invalid renesas,slew-rate value\n");
}
return ret;
}
static int rs9_get_common_config(struct rs9_driver_data *rs9)
{
struct i2c_client *client = rs9->client;
struct device_node *np = client->dev.of_node;
unsigned int amp, ssc;
int ret;
/* Set defaults */
rs9->pll_amplitude = RS9_REG_SS_AMP_0V7;
rs9->pll_ssc = RS9_REG_SS_SSC_100;
/* Output clock amplitude */
ret = of_property_read_u32(np, "renesas,out-amplitude-microvolt",
&amp);
if (!ret) {
if (amp == 600000) /* 0.6V */
rs9->pll_amplitude = RS9_REG_SS_AMP_0V6;
else if (amp == 700000) /* 0.7V (default) */
rs9->pll_amplitude = RS9_REG_SS_AMP_0V7;
else if (amp == 800000) /* 0.8V */
rs9->pll_amplitude = RS9_REG_SS_AMP_0V8;
else if (amp == 900000) /* 0.9V */
rs9->pll_amplitude = RS9_REG_SS_AMP_0V9;
else
return dev_err_probe(&client->dev, -EINVAL,
"Invalid renesas,out-amplitude-microvolt value\n");
}
/* Output clock spread spectrum */
ret = of_property_read_u32(np, "renesas,out-spread-spectrum", &ssc);
if (!ret) {
if (ssc == 100000) /* 100% ... no spread (default) */
rs9->pll_ssc = RS9_REG_SS_SSC_100;
else if (ssc == 99750) /* -0.25% ... down spread */
rs9->pll_ssc = RS9_REG_SS_SSC_M025;
else if (ssc == 99500) /* -0.50% ... down spread */
rs9->pll_ssc = RS9_REG_SS_SSC_M050;
else
return dev_err_probe(&client->dev, -EINVAL,
"Invalid renesas,out-spread-spectrum value\n");
}
return 0;
}
static void rs9_update_config(struct rs9_driver_data *rs9)
{
int i;
/* If amplitude is non-default, update it. */
if (rs9->pll_amplitude != RS9_REG_SS_AMP_0V7) {
regmap_update_bits(rs9->regmap, RS9_REG_SS, RS9_REG_SS_AMP_MASK,
rs9->pll_amplitude);
}
/* If SSC is non-default, update it. */
if (rs9->pll_ssc != RS9_REG_SS_SSC_100) {
regmap_update_bits(rs9->regmap, RS9_REG_SS, RS9_REG_SS_SSC_MASK,
rs9->pll_ssc);
}
for (i = 0; i < rs9->chip_info->num_clks; i++) {
u8 dif = rs9_calc_dif(rs9, i);
if (rs9->clk_dif_sr & dif)
continue;
regmap_update_bits(rs9->regmap, RS9_REG_SR, dif,
rs9->clk_dif_sr & dif);
}
}
static struct clk_hw *
rs9_of_clk_get(struct of_phandle_args *clkspec, void *data)
{
struct rs9_driver_data *rs9 = data;
unsigned int idx = clkspec->args[0];
return rs9->clk_dif[idx];
}
static int rs9_probe(struct i2c_client *client)
{
unsigned char name[5] = "DIF0";
struct rs9_driver_data *rs9;
unsigned int vid, did;
struct clk_hw *hw;
int i, ret;
rs9 = devm_kzalloc(&client->dev, sizeof(*rs9), GFP_KERNEL);
if (!rs9)
return -ENOMEM;
i2c_set_clientdata(client, rs9);
rs9->client = client;
rs9->chip_info = device_get_match_data(&client->dev);
if (!rs9->chip_info)
return -EINVAL;
/* Fetch common configuration from DT (if specified) */
ret = rs9_get_common_config(rs9);
if (ret)
return ret;
/* Fetch DIFx output configuration from DT (if specified) */
for (i = 0; i < rs9->chip_info->num_clks; i++) {
ret = rs9_get_output_config(rs9, i);
if (ret)
return ret;
}
rs9->regmap = devm_regmap_init(&client->dev, NULL,
client, &rs9_regmap_config);
if (IS_ERR(rs9->regmap))
return dev_err_probe(&client->dev, PTR_ERR(rs9->regmap),
"Failed to allocate register map\n");
/* Always read back 1 Byte via I2C */
ret = regmap_write(rs9->regmap, RS9_REG_BCP, 1);
if (ret < 0)
return ret;
ret = regmap_read(rs9->regmap, RS9_REG_VID, &vid);
if (ret < 0)
return ret;
ret = regmap_read(rs9->regmap, RS9_REG_DID, &did);
if (ret < 0)
return ret;
if (vid != RS9_REG_VID_IDT || did != rs9->chip_info->did)
return dev_err_probe(&client->dev, -ENODEV,
"Incorrect VID/DID: %#02x, %#02x. Expected %#02x, %#02x\n",
vid, did, RS9_REG_VID_IDT,
rs9->chip_info->did);
/* Register clock */
for (i = 0; i < rs9->chip_info->num_clks; i++) {
snprintf(name, 5, "DIF%d", i);
hw = devm_clk_hw_register_fixed_factor_index(&client->dev, name,
0, 0, 4, 1);
if (IS_ERR(hw))
return PTR_ERR(hw);
rs9->clk_dif[i] = hw;
}
ret = devm_of_clk_add_hw_provider(&client->dev, rs9_of_clk_get, rs9);
if (!ret)
rs9_update_config(rs9);
return ret;
}
static int __maybe_unused rs9_suspend(struct device *dev)
{
struct rs9_driver_data *rs9 = dev_get_drvdata(dev);
regcache_cache_only(rs9->regmap, true);
regcache_mark_dirty(rs9->regmap);
return 0;
}
static int __maybe_unused rs9_resume(struct device *dev)
{
struct rs9_driver_data *rs9 = dev_get_drvdata(dev);
int ret;
regcache_cache_only(rs9->regmap, false);
ret = regcache_sync(rs9->regmap);
if (ret)
dev_err(dev, "Failed to restore register map: %d\n", ret);
return ret;
}
static const struct rs9_chip_info renesas_9fgv0241_info = {
.model = RENESAS_9FGV0241,
.num_clks = 2,
.did = RS9_REG_DID_TYPE_FGV | 0x02,
};
static const struct rs9_chip_info renesas_9fgv0441_info = {
.model = RENESAS_9FGV0441,
.num_clks = 4,
.did = RS9_REG_DID_TYPE_FGV | 0x04,
};
static const struct i2c_device_id rs9_id[] = {
{ "9fgv0241", .driver_data = RENESAS_9FGV0241 },
{ "9fgv0441", .driver_data = RENESAS_9FGV0441 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rs9_id);
static const struct of_device_id clk_rs9_of_match[] = {
{ .compatible = "renesas,9fgv0241", .data = &renesas_9fgv0241_info },
{ .compatible = "renesas,9fgv0441", .data = &renesas_9fgv0441_info },
{ }
};
MODULE_DEVICE_TABLE(of, clk_rs9_of_match);
static SIMPLE_DEV_PM_OPS(rs9_pm_ops, rs9_suspend, rs9_resume);
static struct i2c_driver rs9_driver = {
.driver = {
.name = "clk-renesas-pcie-9series",
.pm = &rs9_pm_ops,
.of_match_table = clk_rs9_of_match,
},
.probe_new = rs9_probe,
.id_table = rs9_id,
};
module_i2c_driver(rs9_driver);
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_DESCRIPTION("Renesas 9-series PCIe clock generator driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink