5b4248bfee
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
64 lines
1.2 KiB
YAML
64 lines
1.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
|
|
|
|
description:
|
|
The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
|
|
data interface and an SPI control interface.
|
|
|
|
maintainers:
|
|
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
|
|
allOf:
|
|
- $ref: panel-common.yaml#
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: nec,nl8048hl11
|
|
|
|
label: true
|
|
port: true
|
|
reg: true
|
|
reset-gpios: true
|
|
|
|
spi-max-frequency:
|
|
maximum: 10000000
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reset-gpios
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
spi0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
lcd_panel: panel@0 {
|
|
compatible = "nec,nl8048hl11";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
|
|
|
|
port {
|
|
lcd_in: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|