iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-imx
History
Fabio Estevam 8c4300c227 ARM: mx25: Add basic suspend/resume support 
Tested basic suspend/resume on a mx25pdk:

$ echo enabled > /sys/class/tty/ttymxc0/power/wakeup
$ echo mem > /sys/power/state

Then press any key in the serial console and the system wakes up.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-14 11:24:18 +08:00
..
devices
[media] move media platform data to linux/platform_data/media
2015-11-19 08:09:38 -02:00
3ds_debugboard.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
3ds_debugboard.h
ARM: imx: include board headers in the same folder
2012-10-15 09:18:14 +08:00
anatop.c
ARM: imx: Add msl code support for imx6qp
2016-02-14 11:07:17 +08:00
avic.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
board-mx31lilly.h
ARM: imx: include board headers in the same folder
2012-10-15 09:18:14 +08:00
board-mx31lite.h
ARM: imx: include board headers in the same folder
2012-10-15 09:18:14 +08:00
board-mx31moboard.h
ARM: imx: include board headers in the same folder
2012-10-15 09:18:14 +08:00
common.h
ARM: mx25: Add basic suspend/resume support
2016-02-14 11:24:18 +08:00
cpu-imx5.c
ARM: imx5: retrieve iim base from device tree
2014-07-18 16:10:07 +08:00
cpu-imx25.c
ARM: mx25: Retrieve IIM base from dt
2015-03-13 22:06:35 +08:00
cpu-imx27.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
cpu-imx31.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
cpu-imx35.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
cpu.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
cpuidle-imx5.c
cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic
2014-11-12 21:17:27 +01:00
cpuidle-imx6q.c
ARM: imx6: set initial power mode in pm function
2015-06-03 14:44:31 +08:00
cpuidle-imx6sl.c
ARM: imx6: set initial power mode in pm function
2015-06-03 14:44:31 +08:00
cpuidle-imx6sx.c
ARM: imx6: set initial power mode in pm function
2015-06-03 14:44:31 +08:00
cpuidle.h
ARM: imx: support arm power off in cpuidle for i.mx6sx
2015-01-05 21:34:29 +08:00
crmregs-imx3.h
…
devices-imx1.h
ARM: imx: move platform device code into mach-imx
2012-10-15 09:18:15 +08:00
devices-imx21.h
ARM: imx: move platform device code into mach-imx
2012-10-15 09:18:15 +08:00
devices-imx27.h
ARM : i.MX27 : split code for allocation of ressources of camera and eMMA
2012-11-16 16:21:48 +01:00
devices-imx31.h
ARM: imx: move platform device code into mach-imx
2012-10-15 09:18:15 +08:00
devices-imx35.h
ARM: imx: prepare for removal of flexcan_platform_data
2013-06-27 15:15:08 +02:00
ehci-imx27.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
ehci-imx31.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
ehci-imx35.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
ehci.h
ARM: imx5: remove imx51 non-DT support files
2014-07-18 16:10:05 +08:00
epit.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
eukrea-baseboards.h
ARM: i.MX: Remove mach-cpuimx27sd board file
2014-09-01 22:00:01 +08:00
gpc.c
ARM: imx: add platform irq type setting in gpc
2015-11-23 13:12:07 +08:00
hardware.h
ARM: imx: move revision definitions and declarations into a header
2015-06-03 14:44:30 +08:00
headsmp.S
ARM: imx: enable big endian mode
2016-02-02 13:31:19 +08:00
hotplug.c
ARM: imx: do not return from imx_cpu_die() call
2013-10-21 09:37:31 +08:00
iim.h
ARM: imx: include iim.h rather than mach/iim.h
2012-10-15 10:03:10 +08:00
imx1-dt.c
ARM: i.MX1: Add devicetree support
2014-09-16 10:06:44 +08:00
imx27-dt.c
ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
2014-11-22 07:39:36 +08:00
imx31-dt.c
ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
2014-11-22 07:39:36 +08:00
imx35-dt.c
ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
2014-11-22 07:39:36 +08:00
iomux-imx31.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
iomux-mx1.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-mx2x.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-mx3.h
ARM: imx: Fix trivial typo in comments
2015-03-03 12:05:46 +08:00
iomux-mx21.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-mx27.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-mx35.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-v1.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
iomux-v1.h
ARM: imx: move iomux drivers and headers into mach-imx
2012-10-15 09:18:14 +08:00
iomux-v3.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
iomux-v3.h
ARM: imx: Fix trivial typo in comments
2015-03-03 12:05:46 +08:00
irq-common.c
ARM: imx: irq-common: Include header to avoid sparse warning
2013-06-17 15:45:14 +08:00
irq-common.h
ARM: imx: drop support for irq priorisation
2013-12-09 13:18:25 +08:00
Kconfig
ARM: imx: enable big endian mode
2016-02-02 13:31:19 +08:00
mach-apf9328.c
ARM: i.MX: Setup IRQ handler from IRQ driver
2014-05-12 22:58:51 +08:00
mach-armadillo5x0.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-bug.c
ARM: i.MX: Setup IRQ handler from IRQ driver
2014-05-12 22:58:51 +08:00
mach-imx6q.c
ARM: imx: Add msl code support for imx6qp
2016-02-14 11:07:17 +08:00
mach-imx6sl.c
ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier
2015-06-03 14:49:18 +08:00
mach-imx6sx.c
ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier
2015-06-03 14:49:18 +08:00
mach-imx6ul.c
mach-imx/mach-imx6ul.c: proper constness with __initconst
2015-11-25 11:06:52 +08:00
mach-imx7d.c
ARM: imx: enable cpufreq device on i.mx7d
2015-12-02 13:38:03 +08:00
mach-imx25.c
ARM: mx25: Add basic suspend/resume support
2016-02-14 11:24:18 +08:00
mach-imx27_visstrim_m10.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
mach-imx50.c
ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
2014-11-22 07:39:36 +08:00
mach-imx51.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-imx53.c
ARM: SoC platform changes for 3.19
2014-12-09 14:38:28 -08:00
mach-kzm_arm11_01.c
ARM: i.MX: Setup IRQ handler from IRQ driver
2014-05-12 22:58:51 +08:00
mach-ls1021a.c
ARM: imx: Add Freescale LS1021A SMP support
2014-11-23 14:56:21 +08:00
mach-mx21ads.c
gpio: generic: factor into gpio_chip struct
2016-01-05 11:21:00 +01:00
mach-mx27_3ds.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
mach-mx27ads.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-mx31_3ds.c
arm: mach-imx: Convert pr_warning to pr_warn
2014-09-16 10:09:41 +08:00
mach-mx31ads.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-mx31lilly.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
mach-mx31lite.c
arm: mach-imx: Convert pr_warning to pr_warn
2014-09-16 10:09:41 +08:00
mach-mx31moboard.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-mx35_3ds.c
ARM: imx/iomux-v3: allow pad_list to be const
2015-03-03 12:04:41 +08:00
mach-pca100.c
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
mach-pcm037_eet.c
ARM: imx: include common.h rather than mach/common.h
2012-10-15 10:03:10 +08:00
mach-pcm037.c
arm: mach-imx: Convert pr_warning to pr_warn
2014-09-16 10:09:41 +08:00
mach-pcm043.c
ARM: imx/iomux-v3: allow pad_list to be const
2015-03-03 12:04:41 +08:00
mach-qong.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
mach-scb9328.c
ARM: i.MX: Setup IRQ handler from IRQ driver
2014-05-12 22:58:51 +08:00
mach-vf610.c
ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC
2015-05-20 23:10:14 +02:00
mach-vpr200.c
ARM: imx/iomux-v3: allow pad_list to be const
2015-03-03 12:04:41 +08:00
Makefile
ARM: mx25: Add basic suspend/resume support
2016-02-14 11:24:18 +08:00
Makefile.boot
ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC
2015-05-20 23:10:14 +02:00
mm-imx1.c
ARM: imx: move clk_prepare() out from mxc_restart()
2013-06-17 15:45:10 +08:00
mm-imx3.c
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
2013-07-03 09:46:29 -07:00
mm-imx21.c
ARM: imx: move clk_prepare() out from mxc_restart()
2013-06-17 15:45:10 +08:00
mm-imx27.c
ARM: imx: move clk_prepare() out from mxc_restart()
2013-06-17 15:45:10 +08:00
mmdc.c
ARM: imx: mmdc: Include "common.h" header file
2015-06-03 14:49:34 +08:00
mx1.h
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mx2x.h
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mx3x.h
ARM: imx: move revision definitions and declarations into a header
2015-06-03 14:44:30 +08:00
mx21.h
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mx27.h
ARM: imx: move revision definitions and declarations into a header
2015-06-03 14:44:30 +08:00
mx31.h
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mx31lilly-db.c
ARM: imx: remove IRQF_DISABLED
2013-10-21 09:11:05 +08:00
mx31lite-db.c
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mx31moboard-devboard.c
ARM: imx: use PTR_ERR_OR_ZERO
2014-07-18 16:11:36 +08:00
mx31moboard-marxbot.c
ARM: imx: use PTR_ERR_OR_ZERO
2014-07-18 16:11:36 +08:00
mx31moboard-smartbot.c
ARM: imx: use PTR_ERR_OR_ZERO
2014-07-18 16:11:36 +08:00
mx35.h
ARM: imx: include hardware.h rather than mach/hardware.h
2012-10-15 10:05:43 +08:00
mxc.h
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
pcm037.h
…
platsmp.c
ARM: use const and __initconst for smp_operations
2015-12-01 22:17:45 +01:00
pm-imx3.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
pm-imx5.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
pm-imx6.c
ARM: imx6: fix cleanup path in imx6q_suspend_init()
2016-01-28 16:31:45 +08:00
pm-imx25.c
ARM: mx25: Add basic suspend/resume support
2016-02-14 11:24:18 +08:00
pm-imx27.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
src.c
ARM: imx: remove imx_src_prepare_restart() call
2013-11-11 22:58:43 +08:00
ssi-fiq-ksym.c
ARM: imx: merge plat-mxc into mach-imx
2012-10-15 10:02:19 +08:00
ssi-fiq.S
ARM: imx: merge plat-mxc into mach-imx
2012-10-15 10:02:19 +08:00
suspend-imx6.S
ARM: imx: add suspend/resume support for i.mx6ul
2015-09-17 08:54:35 +08:00
suspend-imx53.S
ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.
2015-06-03 14:49:36 +08:00
system.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
tzic.c
ARM: imx: use endian-safe readl/readw/writel/writew
2016-02-02 13:24:17 +08:00
ulpi.h
ARM: imx: Remove mxc specific ulpi access ops
2013-06-17 15:45:16 +08:00