0f3dd4e09a
Kconfig generates include/generated/autoconf.h to make CONFIG options
available to the pre-processor. Symbols with the value 'm' are suffixed
with '_MODULE'
Here is a conflict; CONFIG_FOO=m results in '#define CONFIG_FOO_MODULE 1',
but CONFIG_FOO_MODULE=y also results in the same define.
Also, CONFIG options that end with '_MODULE' confuse the Kconfig/fixdep
interaction; fixdep always assumes CONFIG_FOO_MODULE comes from
CONFIG_FOO=m, so the dependency is not properly tracked for symbols
that end with '_MODULE'.
For these reasons, CONFIG options that end with '_MODULE' should be
avoided in general. (I am planning on adding a check in Kconfig.)
This is the only case in the current kernel.
The new option name was suggested by Péter Ujfalusi. [1]
[1] https://lore.kernel.org/all/d9e777dc-d274-92ee-4d77-711bfd553611@gmail.com/
Fixes: 147162f575 ("ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210901164009.1546967-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
235 lines
7.6 KiB
Plaintext
235 lines
7.6 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menu "Audio support for Texas Instruments SoCs"
|
|
depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST
|
|
|
|
config SND_SOC_TI_EDMA_PCM
|
|
tristate
|
|
select SND_SOC_GENERIC_DMAENGINE_PCM
|
|
|
|
config SND_SOC_TI_SDMA_PCM
|
|
tristate
|
|
select SND_SOC_GENERIC_DMAENGINE_PCM
|
|
|
|
config SND_SOC_TI_UDMA_PCM
|
|
tristate
|
|
select SND_SOC_GENERIC_DMAENGINE_PCM
|
|
|
|
comment "Texas Instruments DAI support for:"
|
|
config SND_SOC_DAVINCI_ASP
|
|
tristate "daVinci Audio Serial Port (ASP) or McBSP support"
|
|
depends on ARCH_DAVINCI || COMPILE_TEST
|
|
select SND_SOC_TI_EDMA_PCM
|
|
help
|
|
Say Y or M here if you want audio support via daVinci ASP or McBSP.
|
|
The driver only implements the ASP support which is a subset of
|
|
daVinci McBSP (w/o the multichannel support).
|
|
|
|
config SND_SOC_DAVINCI_MCASP
|
|
tristate "Multichannel Audio Serial Port (McASP) support"
|
|
depends on COMMON_CLK
|
|
select SND_SOC_TI_EDMA_PCM
|
|
select SND_SOC_TI_SDMA_PCM
|
|
select SND_SOC_TI_UDMA_PCM
|
|
help
|
|
Say Y or M here if you want to have support for McASP IP found in
|
|
various Texas Instruments SoCs like:
|
|
- daVinci devices
|
|
- Sitara line of SoCs (AM335x, AM438x, etc)
|
|
- OMAP4
|
|
- DRA7x devices
|
|
- Keystone devices
|
|
- K3 devices (am654, j721e)
|
|
|
|
config SND_SOC_DAVINCI_VCIF
|
|
tristate "daVinci Voice Interface (VCIF) support"
|
|
depends on ARCH_DAVINCI || COMPILE_TEST
|
|
select SND_SOC_TI_EDMA_PCM
|
|
help
|
|
Say Y or M here if you want audio support via daVinci VCIF.
|
|
|
|
config SND_SOC_OMAP_DMIC
|
|
tristate "Digital Microphone Module (DMIC) support"
|
|
depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST && COMMON_CLK
|
|
select SND_SOC_TI_SDMA_PCM
|
|
help
|
|
Say Y or M here if you want to have support for DMIC IP found in
|
|
OMAP4 and OMAP5.
|
|
|
|
config SND_SOC_OMAP_MCBSP
|
|
tristate "Multichannel Buffered Serial Port (McBSP) support"
|
|
depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST && COMMON_CLK
|
|
select SND_SOC_TI_SDMA_PCM
|
|
help
|
|
Say Y or M here if you want to have support for McBSP IP found in
|
|
Texas Instruments OMAP1/2/3/4/5 SoCs.
|
|
|
|
config SND_SOC_OMAP_MCPDM
|
|
tristate "Multichannel PDM Controller (McPDM) support"
|
|
depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
|
|
select SND_SOC_TI_SDMA_PCM
|
|
help
|
|
Say Y or M here if you want to have support for McPDM IP found in
|
|
OMAP4 and OMAP5.
|
|
|
|
comment "Audio support for boards with Texas Instruments SoCs"
|
|
config SND_SOC_NOKIA_N810
|
|
tristate "SoC Audio support for Nokia N810"
|
|
depends on MACH_NOKIA_N810 && I2C
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_TLV320AIC3X
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on Nokia N810.
|
|
|
|
config SND_SOC_NOKIA_RX51
|
|
tristate "SoC Audio support for Nokia RX-51"
|
|
depends on ARCH_OMAP3 && I2C && GPIOLIB
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_TLV320AIC3X
|
|
select SND_SOC_TPA6130A2
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on Nokia RX-51
|
|
hardware. This is also known as Nokia N900 product.
|
|
|
|
config SND_SOC_OMAP3_PANDORA
|
|
tristate "SoC Audio support for OMAP3 Pandora"
|
|
depends on ARCH_OMAP3
|
|
depends on TWL4030_CORE
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_TWL4030
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora.
|
|
|
|
config SND_SOC_OMAP3_TWL4030
|
|
tristate "SoC Audio support for OMAP3 based boards with twl4030 codec"
|
|
depends on ARCH_OMAP3 || COMPILE_TEST && COMMON_CLK
|
|
depends on TWL4030_CORE
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_TWL4030
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on OMAP3 based
|
|
boards using twl4030 as codec. This driver currently supports:
|
|
- Beagleboard or Devkit8000
|
|
- Gumstix Overo or CompuLab CM-T35/CM-T3730
|
|
- IGEP v2
|
|
- OMAP3EVM
|
|
- SDP3430
|
|
- Zoom2
|
|
|
|
config SND_SOC_OMAP_ABE_TWL6040
|
|
tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
|
|
depends on TWL6040_CORE && COMMON_CLK
|
|
depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
|
|
select SND_SOC_OMAP_DMIC
|
|
select SND_SOC_OMAP_MCPDM
|
|
select SND_SOC_TWL6040
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on OMAP boards
|
|
using ABE and twl6040 codec. This driver currently supports:
|
|
- SDP4430/Blaze boards
|
|
- PandaBoard (4430)
|
|
- PandaBoardES (4460)
|
|
- OMAP5 uEVM
|
|
|
|
config SND_SOC_OMAP_AMS_DELTA
|
|
tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
|
|
depends on MACH_AMS_DELTA && TTY
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_CX20442
|
|
help
|
|
Say Y or M if you want to add support for SoC audio device
|
|
connected to a handset and a speakerphone found on Amstrad E3 (Delta)
|
|
videophone.
|
|
|
|
Note that in order to get those devices fully supported, you have to
|
|
build the kernel with standard serial port driver included and
|
|
configured for at least 4 ports. Then, from userspace, you must load
|
|
a line discipline #19 on the modem (ttyS3) serial line. The simplest
|
|
way to achieve this is to install util-linux-ng and use the included
|
|
ldattach utility. This can be started automatically from udev,
|
|
a simple rule like this one should do the trick (it does for me):
|
|
ACTION=="add", KERNEL=="controlC0", \
|
|
RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
|
|
|
|
config SND_SOC_OMAP_HDMI
|
|
tristate "OMAP4/5 HDMI audio support"
|
|
depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST
|
|
select SND_SOC_TI_SDMA_PCM
|
|
help
|
|
For HDMI audio to work OMAPDSS HDMI support should be
|
|
enabled.
|
|
The hdmi audio driver implements cpu-dai component using the
|
|
callbacks provided by OMAPDSS and registers the component
|
|
under DSS HDMI device. Omap-pcm is registered for platform
|
|
component also under DSS HDMI device. Dummy codec is used as
|
|
as codec component. The hdmi audio driver implements also
|
|
the card and registers it under its own platform device.
|
|
The device for the driver is registered by OMAPDSS hdmi
|
|
driver.
|
|
|
|
config SND_SOC_OMAP_OSK5912
|
|
tristate "SoC Audio support for omap osk5912"
|
|
depends on MACH_OMAP_OSK && I2C
|
|
select SND_SOC_OMAP_MCBSP
|
|
select SND_SOC_TLV320AIC23_I2C
|
|
help
|
|
Say Y or M if you want to add support for SoC audio on osk5912.
|
|
|
|
config SND_SOC_DAVINCI_EVM
|
|
tristate "SoC Audio support for DaVinci EVMs"
|
|
depends on ARCH_DAVINCI && I2C
|
|
select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM
|
|
select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC
|
|
select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC
|
|
select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446
|
|
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM
|
|
select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM
|
|
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM
|
|
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM
|
|
select SND_SOC_TLV320AIC3X
|
|
help
|
|
Say Y if you want to add support for SoC audio on the following TI
|
|
DaVinci EVM platforms:
|
|
- DM355
|
|
- DM365
|
|
- DM6446
|
|
- DM6447
|
|
- DM830
|
|
- DM850
|
|
|
|
choice
|
|
prompt "DM365 codec select"
|
|
depends on SND_SOC_DAVINCI_EVM
|
|
depends on MACH_DAVINCI_DM365_EVM
|
|
|
|
config SND_SOC_DM365_AIC3X_CODEC
|
|
bool "Audio Codec - AIC3101"
|
|
help
|
|
Say Y if you want to add support for AIC3101 audio codec
|
|
|
|
config SND_SOC_DM365_VOICE_CODEC
|
|
bool "Voice Codec - CQ93VC"
|
|
help
|
|
Say Y if you want to add support for SoC On-chip voice codec
|
|
endchoice
|
|
|
|
config SND_SOC_DM365_SELECT_VOICE_CODECS
|
|
def_tristate y
|
|
depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC
|
|
select MFD_DAVINCI_VOICECODEC
|
|
select SND_SOC_CQ0093VC
|
|
help
|
|
The is an internal symbol needed to ensure that the codec
|
|
and MFD driver can be built as loadable modules if necessary.
|
|
|
|
config SND_SOC_J721E_EVM
|
|
tristate "SoC Audio support for j721e EVM"
|
|
depends on ARCH_K3 || COMPILE_TEST && COMMON_CLK
|
|
depends on I2C
|
|
select SND_SOC_PCM3168A_I2C
|
|
select SND_SOC_DAVINCI_MCASP
|
|
help
|
|
Say Y if you want to add support for SoC audio on j721e Common
|
|
Processor Board and Infotainment expansion board.
|
|
endmenu
|
|
|