iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
AnilKumar Ch 8f31cefe32 ARM: OMAP2+: select PINCTRL in Kconfig 
Select PINCTRL in Kconfig under Typical OMAP configuration, this
is required to add pinctrl driver to omap2+ family of devices.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
[tony@atomide.com: updated to select pinctrl-single in defconfig]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10 10:45:59 -07:00
..
include/mach
arm-soc: new SoC support
2012-07-23 16:31:31 -07:00
am35xx-emac.c
ARM: OMAP AM35x: EMAC/MDIO integration: Add Davinci EMAC/MDIO hwmod support
2012-06-27 14:59:57 -06:00
am35xx-emac.h
ARM: OMAP: move generic EMAC init to separate file
2012-03-05 11:08:36 -08:00
board-2430sdp.c
arm-soc: general cleanups
2012-07-23 16:04:15 -07:00
board-3430sdp.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-3630sdp.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-4430sdp.c
ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
2012-07-09 05:07:17 -07:00
board-am3517crane.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-am3517evm.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-apollon.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2012-07-24 13:34:56 -07:00
board-cm-t35.c
ARM: OMAP3: cm-t35: add tvp5150 decoder support
2012-07-02 04:09:06 -07:00
board-cm-t3517.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-devkit8000.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-flash.c
ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
2012-06-26 03:29:57 -07:00
board-flash.h
ARM: OMAP2+: nand: Make board_onenand_init() visible to board code
2012-05-09 14:19:14 -07:00
board-generic.c
ARM: OMAP5: board-generic: Add device tree support
2012-07-09 19:14:39 +05:30
board-h4.c
ARM: OMAP2: Remove legacy USB FS support
2012-06-04 00:57:22 -07:00
board-igep0020.c
ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin
2012-08-07 00:01:42 -07:00
board-ldp.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-n8x0.c
ARM: omap: remove mmc platform data dma_mask and initialization
2012-07-31 12:06:23 +01:00
board-omap3beagle.c
Some OMAP AM35xx fixes.
2012-06-29 06:07:08 -07:00
board-omap3evm.c
ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
2012-07-09 23:22:24 -07:00
board-omap3logic.c
ARM: OMAP2+: TWL: remove usage of pdata->irq_base/_end
2012-06-19 15:24:34 -07:00
board-omap3pandora.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-omap3stalker.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-omap3touchbook.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-omap4panda.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2012-07-24 13:34:56 -07:00
board-overo.c
ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure
2012-07-02 04:58:47 -07:00
board-rm680.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-rx51-peripherals.c
ARM: OMAP: Fix lis3lv02d accelerometer to use gpio_to_irq
2012-06-04 02:41:54 -07:00
board-rx51-video.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-rx51.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
board-ti8168evm.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
board-zoom-debugboard.c
ARM: OMAP2+: smsc911x: Add fixed board regulators
2012-04-03 10:33:19 -07:00
board-zoom-display.c
ARM: OMAP: add includes for missing prototypes
2012-04-13 06:34:26 -06:00
board-zoom-peripherals.c
Merge branch 'fixes-gpio-to-irq' into fixes
2012-03-29 10:16:04 -07:00
board-zoom.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
clkt2xxx_apll.c
OMAP2xxx: clock: add clockfw autoidle support for APLLs
2011-03-07 20:02:13 -07:00
clkt2xxx_dpll.c
OMAP2: clock: add DPLL autoidle support
2011-03-07 20:02:05 -07:00
clkt2xxx_dpllcore.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c
OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control
2011-03-07 20:02:21 -07:00
clkt2xxx_sys.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c
ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors
2012-04-14 17:49:07 -07:00
clkt34xx_dpll3m2.c
OMAP3: set the core dpll clk rate in its set_rate function
2011-05-13 07:08:18 -07:00
clkt_clksel.c
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
2012-03-07 17:29:34 -08:00
clkt_dpll.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
clkt_iclk.c
OMAP2430/3xxx: clock: add modem clock autoidle support
2011-03-07 20:03:12 -07:00
clock2xxx.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
clock2xxx.h
OMAP: clock: fix compile warning
2011-03-09 18:44:28 -07:00
clock3xxx_data.c
USB patches for 3.6-rc1
2012-07-26 10:23:47 -07:00
clock3xxx.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock33xx_data.c
OMAP AM33xx clock data
2012-07-05 08:18:04 -07:00
clock34xx.c
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock34xx.h
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
This branch adds clock data for am33xx. Note that eventually these
2012-07-10 17:41:13 +02:00
clock44xx.h
ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABE
2011-10-07 00:52:58 -06:00
clock2420_data.c
arm-soc: timer updates
2012-07-23 16:21:23 -07:00
clock2430_data.c
arm-soc: timer updates
2012-07-23 16:21:23 -07:00
clock2430.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
clock3517.c
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file
2012-06-26 20:57:22 -06:00
clock.c
ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c
2012-07-05 08:05:15 -07:00
clock.h
ARM: OMAP3+: clock33xx: Add AM33XX clock tree data
2012-06-29 16:16:40 -06:00
clockdomain2xxx_3xxx.c
OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain
2011-09-14 16:01:21 -06:00
clockdomain33xx.c
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
2012-06-18 12:08:06 -06:00
clockdomain44xx.c
ARM: OMAP4: clockdomain/CM code: Update supported transition modes
2012-07-04 03:45:53 -06:00
clockdomain.c
ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API
2012-05-07 23:55:38 -06:00
clockdomain.h
arm-soc: soc-specific updates
2012-07-23 16:08:40 -07:00
clockdomains2xxx_3xxx_data.c
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c
arm-soc: general cleanups
2012-07-23 16:04:15 -07:00
clockdomains33xx_data.c
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
2012-06-18 12:08:06 -06:00
clockdomains44xx_data.c
arm-soc: general cleanups
2012-07-23 16:04:15 -07:00
clockdomains2420_data.c
ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain
2012-06-19 15:01:02 -06:00
clockdomains2430_data.c
ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain
2012-06-19 15:01:02 -06:00
cm1_44xx.h
OMAP4: cm: Remove RESTORE macros to avoid access from SW
2011-07-09 19:15:05 -06:00
cm2_44xx.h
OMAP4: cm: Remove RESTORE macros to avoid access from SW
2011-07-09 19:15:05 -06:00
cm2xxx_3xxx.c
ARM: OMAP2+: Fix build error after merge
2012-03-07 09:03:03 -08:00
cm2xxx_3xxx.h
OMAP2xxx: clock: add clockfw autoidle support for APLLs
2011-03-07 20:02:13 -07:00
cm33xx.c
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
2012-06-18 12:08:06 -06:00
cm33xx.h
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
2012-06-18 12:08:06 -06:00
cm44xx.c
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
cm44xx.h
OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros
2011-07-10 05:56:30 -06:00
cm-regbits-24xx.h
OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:02:57 -07:00
cm-regbits-33xx.h
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
2012-06-18 12:08:06 -06:00
cm-regbits-34xx.h
ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data
2012-06-27 14:53:46 -06:00
cm-regbits-44xx.h
Merge branch 'next/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
2011-07-26 17:09:31 -07:00
cm.h
ARM: OMAP2+: CM: increase the module disable timeout
2012-06-21 18:08:47 -06:00
cminst44xx.c
ARM: OMAP4: clockdomain/CM code: Update supported transition modes
2012-07-04 03:45:53 -06:00
cminst44xx.h
ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c file and make them __weak
2012-07-04 05:04:00 -06:00
common-board-devices.c
arm-soc: board specific updates
2012-07-23 17:34:48 -07:00
common-board-devices.h
ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
2012-07-06 01:37:25 -07:00
common.c
ARM: OMAP5: Add minimal support for OMAP5430 SOC
2012-07-09 19:14:39 +05:30
common.h
ARM: omap2+: board-generic: clean up the irq data from board file
2012-07-09 19:14:39 +05:30
control.c
ARM: OMAP2+: control: new APIs to configure boot address and mode
2012-06-18 16:18:09 -06:00
control.h
arm-soc: soc-specific updates
2012-07-23 16:08:40 -07:00
cpuidle34xx.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
cpuidle44xx.c
ARM: arm-soc: cpuidle enablement for OMAP
2012-08-02 11:48:54 -07:00
devices.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
devices.h
[media] omap3: Add function to register omap3isp platform device structure
2011-03-22 04:53:42 -03:00
display.c
ARM: OMAP2PLUS: DSS: Disable LCD3 output when resetting DSS
2012-06-29 10:37:53 +03:00
display.h
ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
2011-11-08 03:16:46 -07:00
dma.c
ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.
2012-05-08 11:54:24 +05:30
dpll3xxx.c
ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c
2012-07-05 08:05:15 -07:00
dpll44xx.c
ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABE
2011-10-07 00:52:58 -06:00
drm.c
omap2+: add drm device
2012-07-02 04:05:57 -07:00
dsp.c
Merge branch 'cleanup-hwmod' into cleanup
2012-06-28 05:47:01 -07:00
emu.c
ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
2012-02-28 17:33:41 -08:00
gpio.c
GPIO driver changes for v3.5 merge window
2012-05-24 14:01:46 -07:00
gpmc-nand.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
gpmc-onenand.c
ARM: OMAP2+: clean up some cppcheck warnings
2012-04-17 15:50:47 -06:00
gpmc-smc91x.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
gpmc-smsc911x.c
ARM: OMAP2+: smsc911x: Remove regulator support from gmpc-smsc911x
2012-04-03 10:31:34 -07:00
gpmc.c
ARM: OMAP5: gpmc: Update gpmc_init()
2012-07-09 19:14:39 +05:30
hdq1w.c
ARM: OMAP2+: HDQ1W: use omap_device
2012-06-21 21:40:38 -06:00
hsmmc.c
ARM: omap: remove mmc platform data dma_mask and initialization
2012-07-31 12:06:23 +01:00
hsmmc.h
MMC highlights for 3.4:
2012-03-28 20:59:45 -07:00
hwspinlock.c
ARM: OMAP4: hwspinlocks_init() should be static
2012-05-13 16:11:29 +03:00
i2c.c
ARM: 7159/1: OMAP: Introduce local common.h files
2011-11-17 17:09:30 +00:00
id.c
ARM: OMAP5: id: Add cpu id for ES versions
2012-07-09 19:14:39 +05:30
io.c
arm-soc: clk changes
2012-07-23 17:51:03 -07:00
iomap.h
ARM: OMAP5: Add minimal support for OMAP5430 SOC
2012-07-09 19:14:39 +05:30
iommu2.c
omap: iommu: omapify 'struct iommu' and exposed API
2011-08-26 11:46:01 +02:00
irq.c
arm-soc: new SoC support
2012-07-23 16:31:31 -07:00
Kconfig
ARM: OMAP2+: select PINCTRL in Kconfig
2012-09-10 10:45:59 -07:00
mailbox.c
Merge branch 'fixes-omap4-dsp' into fixes-non-critical
2012-06-28 00:07:30 -07:00
Makefile
arm-soc: clk changes
2012-07-23 17:51:03 -07:00
Makefile.boot
arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
2012-09-10 10:34:51 -07:00
mcbsp.c
ARM: Non-critical bug fixes
2012-03-27 15:55:54 -07:00
msdi.c
ARM: OMAP2: Use hwmod to initialize mmc for 2420
2012-06-26 03:14:20 -07:00
mux34xx.c
omap3|4: mux: make local structures static
2011-01-06 19:58:28 -08:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux44xx.c
ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
2011-06-01 02:25:04 -07:00
mux44xx.h
OMAP4: mux: Add CBS package data for OMAP4430 ES2
2010-11-17 12:01:52 +01:00
mux2420.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2420.h
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2430.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2430.h
Fix common misspellings
2011-03-31 11:26:23 -03:00
mux.c
Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc
2012-06-23 16:16:29 -07:00
mux.h
OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup
2012-06-05 04:04:11 -07:00
omap4-common.c
ARM: OMAP4: Add L2 Cache Controller in Device Tree
2012-09-07 19:18:41 +02:00
omap4-sar-layout.h
ARM: OMAP5: Add the WakeupGen IP updates
2012-07-09 19:14:39 +05:30
omap_hwmod_2xxx_3xxx_interconnect_data.c
ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data
2012-05-08 17:25:36 -06:00
omap_hwmod_2xxx_3xxx_ipblock_data.c
ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data
2012-05-08 17:25:36 -06:00
omap_hwmod_2xxx_interconnect_data.c
ARM: OMAP2xxx: hwmod data: share common interface data
2012-04-19 04:25:06 -06:00
omap_hwmod_2xxx_ipblock_data.c
ARM: OMAP2+: Fix external clock support for dmtimers
2012-06-14 02:39:47 -07:00
omap_hwmod_3xxx_data.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
omap_hwmod_44xx_data.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
omap_hwmod_2420_data.c
Merge branches 'clock_cleanup_misc_3.6', 'control_clean_dspbridge_writes_cleanup_3.6', 'hwmod_soc_conditional_cleanup_3.6', 'mcbsp_clock_aliases_cleanup_3.6' and 'remove_clkdm_requirement_from_hwmod_3.6' into omap_cleanup_a_3.6
2012-06-20 20:11:36 -06:00
omap_hwmod_2430_data.c
Merge branches 'clock_cleanup_misc_3.6', 'control_clean_dspbridge_writes_cleanup_3.6', 'hwmod_soc_conditional_cleanup_3.6', 'mcbsp_clock_aliases_cleanup_3.6' and 'remove_clkdm_requirement_from_hwmod_3.6' into omap_cleanup_a_3.6
2012-06-20 20:11:36 -06:00
omap_hwmod_common_data.c
Merge branches 'hwmod_am335x_support_3.6', 'clkdm_pwrdm_devel_a_3.6' and 'misc_devel_3.6' into omap_devel_f_3.6
2012-07-04 06:05:51 -06:00
omap_hwmod_common_data.h
ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database
2012-05-08 17:25:36 -06:00
omap_hwmod.c
ARM: OMAP: omap_device: Do not overwrite resources allocated by OF layer
2012-09-07 19:17:40 +02:00
omap_l3_noc.c
ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module
2011-11-23 14:45:37 -08:00
omap_l3_noc.h
ARM: OMAP5: l3: Add l3 error handler support for omap5
2012-07-09 19:14:39 +05:30
omap_l3_smx.c
ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set
2012-06-06 01:42:20 -07:00
omap_l3_smx.h
OMAP: Fix sparse warnings in l3 error handler.
2011-09-24 13:28:57 +05:30
omap_opp_data.h
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
omap_phy_internal.c
ARM: OMAP2+: Fix MUSB ifdefs for platform init code
2012-06-20 07:18:15 -07:00
omap_twl.c
OMAP4: PM: TWL6030: add cmd register
2011-09-15 12:09:37 -07:00
omap-headsmp.S
ARM: OMAP5: Add SMP support
2012-07-09 19:14:39 +05:30
omap-hotplug.c
ARM: OMAP5: Add the WakeupGen IP updates
2012-07-09 19:14:39 +05:30
omap-iommu.c
ARM: OMAP4: fix irq and clock name for dsp-iommu
2012-05-13 16:09:46 +03:00
omap-mpuss-lowpower.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2012-07-24 13:34:56 -07:00
omap-secure.c
ARM: OMAP: add includes for missing prototypes
2012-04-13 06:34:26 -06:00
omap-smc.S
ARM: OMAP: Add Secure HAL and monitor mode API infrastructure.
2011-12-08 11:29:00 -08:00
omap-smp.c
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
2012-07-27 15:14:26 -07:00
omap-wakeupgen.c
ARM: OMAP5: Add the WakeupGen IP updates
2012-07-09 19:14:39 +05:30
opp2xxx.h
ARM: OMAP: am33xx: Update common omap platform files
2011-12-13 10:46:43 -08:00
opp3xxx_data.c
Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-11 09:39:58 -08:00
opp4xxx_data.c
Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-11 09:39:58 -08:00
opp2420_data.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
opp2430_data.c
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
opp.c
ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one
2012-06-19 15:23:29 -07:00
pm24xx.c
arm-soc: sweeping late_initcall cleanup
2012-05-26 13:14:01 -07:00
pm34xx.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
pm44xx.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
pm-debug.c
ARM: OMAP2+: PM debug: fix the use of debugfs_create_* API
2012-03-05 15:38:02 -08:00
pm.c
ARM: omap2: use machine specific hook for late init
2012-05-08 20:36:20 +08:00
pm.h
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
powerdomain2xxx_3xxx.c
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
2012-03-07 17:29:34 -08:00
powerdomain33xx.c
ARM: OMAP AM33xx: powerdomains: add AM335x support
2012-06-18 12:08:06 -06:00
powerdomain44xx.c
ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
2012-03-08 10:48:12 -08:00
powerdomain-common.c
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
2012-03-07 17:29:34 -08:00
powerdomain.c
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
powerdomain.h
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
powerdomains2xxx_3xxx_data.c
OMAP3: powerdomain data: add voltage domains
2011-09-15 11:39:10 -07:00
powerdomains2xxx_3xxx_data.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c
OMAP2: add voltage domains and connect to powerdomains
2011-09-15 11:39:10 -07:00
powerdomains3xxx_data.c
arm: omap3: am35x: Set proper powerdomain states
2012-06-28 00:12:35 -06:00
powerdomains33xx_data.c
ARM: OMAP AM33xx: powerdomains: add AM335x support
2012-06-18 12:08:06 -06:00
powerdomains44xx_data.c
OMAP4: powerdomain data: add voltage domains
2011-09-15 11:39:10 -07:00
prcm44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
prcm_mpu44xx.h
OMAP4: prcm_mpu: Fix indent in few macros
2011-07-09 19:15:06 -06:00
prcm-common.h
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
prcm.c
ARM: OMAP5: Add minimal support for OMAP5430 SOC
2012-07-09 19:14:39 +05:30
prm2xxx_3xxx.c
ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
2012-06-29 07:19:52 -07:00
prm2xxx_3xxx.h
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
prm33xx.c
ARM: OMAP AM33xx: PRM: add PRM support
2012-06-18 12:08:06 -06:00
prm33xx.h
ARM: OMAP AM33xx: PRM: add PRM support
2012-06-18 12:08:06 -06:00
prm44xx.c
ARM: OMAP3+: PRM: Enable IO wake up
2012-06-22 08:40:03 -06:00
prm44xx.h
ARM: OMAP4: PRM: Add IO Daisychain support
2012-06-22 08:40:03 -06:00
prm_common.c
arm-soc: cleanups, part 2
2012-07-23 16:22:12 -07:00
prm-regbits-24xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-33xx.h
ARM: OMAP AM33xx: PRM: add PRM support
2012-06-18 12:08:06 -06:00
prm-regbits-34xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h
OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts
2011-07-08 02:18:24 -07:00
prm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prminst44xx.c
ARM: OMAP4+: Add prm and cm base init function.
2012-05-07 23:55:22 -06:00
prminst44xx.h
OMAP4: prm: Replace warm reset API with the offset based version
2011-07-10 05:56:31 -06:00
scrm44xx.h
OMAP4: PRCM: Add SCRM header file
2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-nokia.c
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
sdram-nokia.h
arm: omap: add sdram-nokia.h
2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
ARM: OMAP2+: Fix build error after merge
2012-03-07 09:03:03 -08:00
sdrc.c
ARM: 7159/1: OMAP: Introduce local common.h files
2011-11-17 17:09:30 +00:00
sdrc.h
OMAP2+: use global values for the SRAM PA addresses
2010-12-21 14:45:56 -08:00
serial.c
OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup
2012-06-05 04:04:11 -07:00
sleep24xx.S
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
sleep34xx.S
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
2012-02-24 10:34:35 -08:00
sleep44xx.S
Disintegrate asm/system.h for ARM
2012-03-28 18:30:01 +01:00
smartreflex-class3.c
ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains.
2012-05-31 16:03:44 -07:00
sr_device.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2012-07-24 13:34:56 -07:00
sram34xx.S
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
sram242x.S
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
sram243x.S
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
2012-02-24 10:34:35 -08:00
timer.c
ARM: OMAP4: Add local timer support for Device Tree
2012-09-07 19:18:43 +02:00
twl-common.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2012-07-24 13:34:56 -07:00
twl-common.h
OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration
2012-05-09 14:19:16 -07:00
usb-host.c
ARM: OMAP: fix section mismatches in usb-host.c
2012-04-03 11:08:37 -07:00
usb-musb.c
ARM: OMAP2+: Fix MUSB ifdefs for platform init code
2012-06-20 07:18:15 -07:00
usb-tusb6010.c
ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
2012-06-20 07:18:15 -07:00
vc3xxx_data.c
arm: omap3: voltage: fix channel configuration
2012-03-06 17:35:24 -08:00
vc44xx_data.c
ARM: 7159/1: OMAP: Introduce local common.h files
2011-11-17 17:09:30 +00:00
vc.c
ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
2012-03-08 10:48:12 -08:00
vc.h
OMAP2+: VC: more registers are per-channel starting with OMAP5
2011-09-15 12:09:22 -07:00
voltage.c
ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table
2012-03-06 17:37:14 -08:00
voltage.h
arm-soc: power management changes
2012-07-23 17:43:53 -07:00
voltagedomains2xxx_data.c
OMAP2: add voltage domains and connect to powerdomains
2011-09-15 11:39:10 -07:00
voltagedomains3xxx_data.c
ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
2012-05-10 09:39:42 -07:00
voltagedomains33xx_data.c
ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-06-18 00:47:26 -06:00
voltagedomains44xx_data.c
ARM: OMAP: fix voltage domain build errors with PM_OPP disabled
2012-02-21 09:36:34 +00:00
vp3xxx_data.c
ARM: 7159/1: OMAP: Introduce local common.h files
2011-11-17 17:09:30 +00:00
vp44xx_data.c
ARM: 7159/1: OMAP: Introduce local common.h files
2011-11-17 17:09:30 +00:00
vp.c
ARM: OMAP3+: PM: VP: fix integer truncation error
2012-03-06 16:13:50 -08:00
vp.h
OMAP3+: VP: remove unused omap_vp_get_curr_volt()
2011-09-15 12:09:08 -07:00
wd_timer.c
ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset
2012-05-08 17:25:37 -06:00
wd_timer.h
ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset
2012-05-08 17:25:37 -06:00