6cd35888a0
Johan Hedberg says: ==================== pull request: bluetooth-next 2020-05-13 Here's a second attempt at a bluetooth-next pull request which supercedes the one dated 2020-05-09. This should have the issues discovered by Jakub fixed. - Add support for Intel Typhoon Peak device (8087:0032) - Add device tree bindings for Realtek RTL8723BS device - Add device tree bindings for Qualcomm QCA9377 device - Add support for experimental features configuration through mgmt - Add driver hook to prevent wake from suspend - Add support for waiting for L2CAP disconnection response - Multiple fixes & cleanups to the btbcm driver - Add support for LE scatternet topology for selected devices - A few other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
70 lines
1.8 KiB
Plaintext
70 lines
1.8 KiB
Plaintext
Qualcomm Bluetooth Chips
|
|
---------------------
|
|
|
|
This documents the binding structure and common properties for serial
|
|
attached Qualcomm devices.
|
|
|
|
Serial attached Qualcomm devices shall be a child node of the host UART
|
|
device the slave device is attached to.
|
|
|
|
Required properties:
|
|
- compatible: should contain one of the following:
|
|
* "qcom,qca6174-bt"
|
|
* "qcom,qca9377-bt"
|
|
* "qcom,wcn3990-bt"
|
|
* "qcom,wcn3991-bt"
|
|
* "qcom,wcn3998-bt"
|
|
* "qcom,qca6390-bt"
|
|
|
|
Optional properties for compatible string qcom,qca6174-bt:
|
|
|
|
- enable-gpios: gpio specifier used to enable chip
|
|
- clocks: clock provided to the controller (SUSCLK_32KHZ)
|
|
- firmware-name: specify the name of nvm firmware to load
|
|
|
|
Optional properties for compatible string qcom,qca9377-bt:
|
|
|
|
- max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
|
|
|
|
Required properties for compatible string qcom,wcn399x-bt:
|
|
|
|
- vddio-supply: VDD_IO supply regulator handle.
|
|
- vddxo-supply: VDD_XO supply regulator handle.
|
|
- vddrf-supply: VDD_RF supply regulator handle.
|
|
- vddch0-supply: VDD_CH0 supply regulator handle.
|
|
|
|
Optional properties for compatible string qcom,wcn399x-bt:
|
|
|
|
- max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
|
|
- firmware-name: specify the name of nvm firmware to load
|
|
- clocks: clock provided to the controller
|
|
|
|
Examples:
|
|
|
|
serial@7570000 {
|
|
label = "BT-UART";
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,qca6174-bt";
|
|
|
|
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&divclk4>;
|
|
firmware-name = "nvm_00440302.bin";
|
|
};
|
|
};
|
|
|
|
serial@898000 {
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
firmware-name = "crnv21.bin";
|
|
clocks = <&rpmhcc RPMH_RF_CLK2>;
|
|
};
|
|
};
|