linux/drivers/gpu/drm/i915/display/intel_drrs.c
Ville Syrjälä 3eb08ea58e drm/i915: s/PIPECONF/TRANSCONF/
Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.

While the usual convention is to pick the earliers name I think
in this case it's more clear to use the later name. Especially
as even the register offset is in the wrong range (0x70000 vs.
0x60000) and thus makes it look like this is per-pipe.

There is one place in gvt that's doing something with TRANSCONF
while iterating with for_each_pipe(). So that might not be doing
the right thing for TRANSCODER_EDP, dunno. Not knowing what it
does I left it as is to avoid breakage.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-17 23:25:15 +02:00

403 lines
11 KiB
C

// SPDX-License-Identifier: MIT
/*
* Copyright © 2021 Intel Corporation
*/
#include "i915_drv.h"
#include "i915_reg.h"
#include "intel_atomic.h"
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_drrs.h"
#include "intel_panel.h"
/**
* DOC: Display Refresh Rate Switching (DRRS)
*
* Display Refresh Rate Switching (DRRS) is a power conservation feature
* which enables swtching between low and high refresh rates,
* dynamically, based on the usage scenario. This feature is applicable
* for internal panels.
*
* Indication that the panel supports DRRS is given by the panel EDID, which
* would list multiple refresh rates for one resolution.
*
* DRRS is of 2 types - static and seamless.
* Static DRRS involves changing refresh rate (RR) by doing a full modeset
* (may appear as a blink on screen) and is used in dock-undock scenario.
* Seamless DRRS involves changing RR without any visual effect to the user
* and can be used during normal system usage. This is done by programming
* certain registers.
*
* Support for static/seamless DRRS may be indicated in the VBT based on
* inputs from the panel spec.
*
* DRRS saves power by switching to low RR based on usage scenarios.
*
* The implementation is based on frontbuffer tracking implementation. When
* there is a disturbance on the screen triggered by user activity or a periodic
* system activity, DRRS is disabled (RR is changed to high RR). When there is
* no movement on screen, after a timeout of 1 second, a switch to low RR is
* made.
*
* For integration with frontbuffer tracking code, intel_drrs_invalidate()
* and intel_drrs_flush() are called.
*
* DRRS can be further extended to support other internal panels and also
* the scenario of video playback wherein RR is set based on the rate
* requested by userspace.
*/
const char *intel_drrs_type_str(enum drrs_type drrs_type)
{
static const char * const str[] = {
[DRRS_TYPE_NONE] = "none",
[DRRS_TYPE_STATIC] = "static",
[DRRS_TYPE_SEAMLESS] = "seamless",
};
if (drrs_type >= ARRAY_SIZE(str))
return "<invalid>";
return str[drrs_type];
}
static void
intel_drrs_set_refresh_rate_pipeconf(struct intel_crtc *crtc,
enum drrs_refresh_rate refresh_rate)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder = crtc->drrs.cpu_transcoder;
u32 bit;
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
bit = TRANSCONF_REFRESH_RATE_ALT_VLV;
else
bit = TRANSCONF_REFRESH_RATE_ALT_ILK;
intel_de_rmw(dev_priv, TRANSCONF(cpu_transcoder),
bit, refresh_rate == DRRS_REFRESH_RATE_LOW ? bit : 0);
}
static void
intel_drrs_set_refresh_rate_m_n(struct intel_crtc *crtc,
enum drrs_refresh_rate refresh_rate)
{
intel_cpu_transcoder_set_m1_n1(crtc, crtc->drrs.cpu_transcoder,
refresh_rate == DRRS_REFRESH_RATE_LOW ?
&crtc->drrs.m2_n2 : &crtc->drrs.m_n);
}
bool intel_drrs_is_active(struct intel_crtc *crtc)
{
return crtc->drrs.cpu_transcoder != INVALID_TRANSCODER;
}
static void intel_drrs_set_state(struct intel_crtc *crtc,
enum drrs_refresh_rate refresh_rate)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
if (refresh_rate == crtc->drrs.refresh_rate)
return;
if (intel_cpu_transcoder_has_m2_n2(dev_priv, crtc->drrs.cpu_transcoder))
intel_drrs_set_refresh_rate_pipeconf(crtc, refresh_rate);
else
intel_drrs_set_refresh_rate_m_n(crtc, refresh_rate);
crtc->drrs.refresh_rate = refresh_rate;
}
static void intel_drrs_schedule_work(struct intel_crtc *crtc)
{
mod_delayed_work(system_wq, &crtc->drrs.work, msecs_to_jiffies(1000));
}
static unsigned int intel_drrs_frontbuffer_bits(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_i915_private *i915 = to_i915(crtc->base.dev);
unsigned int frontbuffer_bits;
frontbuffer_bits = INTEL_FRONTBUFFER_ALL_MASK(crtc->pipe);
for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc,
crtc_state->bigjoiner_pipes)
frontbuffer_bits |= INTEL_FRONTBUFFER_ALL_MASK(crtc->pipe);
return frontbuffer_bits;
}
/**
* intel_drrs_activate - activate DRRS
* @crtc_state: the crtc state
*
* Activates DRRS on the crtc.
*/
void intel_drrs_activate(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
if (!crtc_state->has_drrs)
return;
if (!crtc_state->hw.active)
return;
if (intel_crtc_is_bigjoiner_slave(crtc_state))
return;
mutex_lock(&crtc->drrs.mutex);
crtc->drrs.cpu_transcoder = crtc_state->cpu_transcoder;
crtc->drrs.m_n = crtc_state->dp_m_n;
crtc->drrs.m2_n2 = crtc_state->dp_m2_n2;
crtc->drrs.frontbuffer_bits = intel_drrs_frontbuffer_bits(crtc_state);
crtc->drrs.busy_frontbuffer_bits = 0;
intel_drrs_schedule_work(crtc);
mutex_unlock(&crtc->drrs.mutex);
}
/**
* intel_drrs_deactivate - deactivate DRRS
* @old_crtc_state: the old crtc state
*
* Deactivates DRRS on the crtc.
*/
void intel_drrs_deactivate(const struct intel_crtc_state *old_crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
if (!old_crtc_state->has_drrs)
return;
if (!old_crtc_state->hw.active)
return;
if (intel_crtc_is_bigjoiner_slave(old_crtc_state))
return;
mutex_lock(&crtc->drrs.mutex);
if (intel_drrs_is_active(crtc))
intel_drrs_set_state(crtc, DRRS_REFRESH_RATE_HIGH);
crtc->drrs.cpu_transcoder = INVALID_TRANSCODER;
crtc->drrs.frontbuffer_bits = 0;
crtc->drrs.busy_frontbuffer_bits = 0;
mutex_unlock(&crtc->drrs.mutex);
cancel_delayed_work_sync(&crtc->drrs.work);
}
static void intel_drrs_downclock_work(struct work_struct *work)
{
struct intel_crtc *crtc = container_of(work, typeof(*crtc), drrs.work.work);
mutex_lock(&crtc->drrs.mutex);
if (intel_drrs_is_active(crtc) && !crtc->drrs.busy_frontbuffer_bits)
intel_drrs_set_state(crtc, DRRS_REFRESH_RATE_LOW);
mutex_unlock(&crtc->drrs.mutex);
}
static void intel_drrs_frontbuffer_update(struct drm_i915_private *dev_priv,
unsigned int all_frontbuffer_bits,
bool invalidate)
{
struct intel_crtc *crtc;
for_each_intel_crtc(&dev_priv->drm, crtc) {
unsigned int frontbuffer_bits;
mutex_lock(&crtc->drrs.mutex);
frontbuffer_bits = all_frontbuffer_bits & crtc->drrs.frontbuffer_bits;
if (!frontbuffer_bits) {
mutex_unlock(&crtc->drrs.mutex);
continue;
}
if (invalidate)
crtc->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
else
crtc->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* flush/invalidate means busy screen hence upclock */
intel_drrs_set_state(crtc, DRRS_REFRESH_RATE_HIGH);
/*
* flush also means no more activity hence schedule downclock, if all
* other fbs are quiescent too
*/
if (!crtc->drrs.busy_frontbuffer_bits)
intel_drrs_schedule_work(crtc);
else
cancel_delayed_work(&crtc->drrs.work);
mutex_unlock(&crtc->drrs.mutex);
}
}
/**
* intel_drrs_invalidate - Disable Idleness DRRS
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* This function gets called everytime rendering on the given planes start.
* Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
*
* Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
*/
void intel_drrs_invalidate(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits)
{
intel_drrs_frontbuffer_update(dev_priv, frontbuffer_bits, true);
}
/**
* intel_drrs_flush - Restart Idleness DRRS
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* This function gets called every time rendering on the given planes has
* completed or flip on a crtc is completed. So DRRS should be upclocked
* (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
* if no other planes are dirty.
*
* Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
*/
void intel_drrs_flush(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits)
{
intel_drrs_frontbuffer_update(dev_priv, frontbuffer_bits, false);
}
/**
* intel_drrs_crtc_init - Init DRRS for CRTC
* @crtc: crtc
*
* This function is called only once at driver load to initialize basic
* DRRS stuff.
*
*/
void intel_drrs_crtc_init(struct intel_crtc *crtc)
{
INIT_DELAYED_WORK(&crtc->drrs.work, intel_drrs_downclock_work);
mutex_init(&crtc->drrs.mutex);
crtc->drrs.cpu_transcoder = INVALID_TRANSCODER;
}
static int intel_drrs_debugfs_status_show(struct seq_file *m, void *unused)
{
struct intel_crtc *crtc = m->private;
const struct intel_crtc_state *crtc_state;
int ret;
ret = drm_modeset_lock_single_interruptible(&crtc->base.mutex);
if (ret)
return ret;
crtc_state = to_intel_crtc_state(crtc->base.state);
mutex_lock(&crtc->drrs.mutex);
seq_printf(m, "DRRS enabled: %s\n",
str_yes_no(crtc_state->has_drrs));
seq_printf(m, "DRRS active: %s\n",
str_yes_no(intel_drrs_is_active(crtc)));
seq_printf(m, "DRRS refresh rate: %s\n",
crtc->drrs.refresh_rate == DRRS_REFRESH_RATE_LOW ?
"low" : "high");
seq_printf(m, "DRRS busy frontbuffer bits: 0x%x\n",
crtc->drrs.busy_frontbuffer_bits);
mutex_unlock(&crtc->drrs.mutex);
drm_modeset_unlock(&crtc->base.mutex);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(intel_drrs_debugfs_status);
static int intel_drrs_debugfs_ctl_set(void *data, u64 val)
{
struct intel_crtc *crtc = data;
struct drm_i915_private *i915 = to_i915(crtc->base.dev);
struct intel_crtc_state *crtc_state;
struct drm_crtc_commit *commit;
int ret;
ret = drm_modeset_lock_single_interruptible(&crtc->base.mutex);
if (ret)
return ret;
crtc_state = to_intel_crtc_state(crtc->base.state);
if (!crtc_state->hw.active ||
!crtc_state->has_drrs)
goto out;
commit = crtc_state->uapi.commit;
if (commit) {
ret = wait_for_completion_interruptible(&commit->hw_done);
if (ret)
goto out;
}
drm_dbg(&i915->drm,
"Manually %sactivating DRRS\n", val ? "" : "de");
if (val)
intel_drrs_activate(crtc_state);
else
intel_drrs_deactivate(crtc_state);
out:
drm_modeset_unlock(&crtc->base.mutex);
return ret;
}
DEFINE_DEBUGFS_ATTRIBUTE(intel_drrs_debugfs_ctl_fops,
NULL, intel_drrs_debugfs_ctl_set, "%llu\n");
void intel_drrs_crtc_debugfs_add(struct intel_crtc *crtc)
{
debugfs_create_file("i915_drrs_status", 0444, crtc->base.debugfs_entry,
crtc, &intel_drrs_debugfs_status_fops);
debugfs_create_file_unsafe("i915_drrs_ctl", 0644, crtc->base.debugfs_entry,
crtc, &intel_drrs_debugfs_ctl_fops);
}
static int intel_drrs_debugfs_type_show(struct seq_file *m, void *unused)
{
struct intel_connector *connector = m->private;
seq_printf(m, "DRRS type: %s\n",
intel_drrs_type_str(intel_panel_drrs_type(connector)));
return 0;
}
DEFINE_SHOW_ATTRIBUTE(intel_drrs_debugfs_type);
void intel_drrs_connector_debugfs_add(struct intel_connector *connector)
{
if (intel_panel_drrs_type(connector) == DRRS_TYPE_NONE)
return;
debugfs_create_file("i915_drrs_type", 0444, connector->base.debugfs_entry,
connector, &intel_drrs_debugfs_type_fops);
}