linux/drivers/crypto/qat/qat_common/adf_sriov.c
Adam Guerin 802c6c3ef3 crypto: qat - replace pci with PCI in comments
Change all lower case pci in comments to be upper case PCI.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13 20:38:44 +11:00

217 lines
5.8 KiB
C

// SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only)
/* Copyright(c) 2015 - 2020 Intel Corporation */
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/iommu.h>
#include "adf_common_drv.h"
#include "adf_cfg.h"
#include "adf_pf2vf_msg.h"
static struct workqueue_struct *pf2vf_resp_wq;
struct adf_pf2vf_resp {
struct work_struct pf2vf_resp_work;
struct adf_accel_vf_info *vf_info;
};
static void adf_iov_send_resp(struct work_struct *work)
{
struct adf_pf2vf_resp *pf2vf_resp =
container_of(work, struct adf_pf2vf_resp, pf2vf_resp_work);
adf_vf2pf_req_hndl(pf2vf_resp->vf_info);
kfree(pf2vf_resp);
}
static void adf_vf2pf_bh_handler(void *data)
{
struct adf_accel_vf_info *vf_info = (struct adf_accel_vf_info *)data;
struct adf_pf2vf_resp *pf2vf_resp;
pf2vf_resp = kzalloc(sizeof(*pf2vf_resp), GFP_ATOMIC);
if (!pf2vf_resp)
return;
pf2vf_resp->vf_info = vf_info;
INIT_WORK(&pf2vf_resp->pf2vf_resp_work, adf_iov_send_resp);
queue_work(pf2vf_resp_wq, &pf2vf_resp->pf2vf_resp_work);
}
static int adf_enable_sriov(struct adf_accel_dev *accel_dev)
{
struct pci_dev *pdev = accel_to_pci_dev(accel_dev);
int totalvfs = pci_sriov_get_totalvfs(pdev);
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
struct adf_accel_vf_info *vf_info;
int i;
for (i = 0, vf_info = accel_dev->pf.vf_info; i < totalvfs;
i++, vf_info++) {
/* This ptr will be populated when VFs will be created */
vf_info->accel_dev = accel_dev;
vf_info->vf_nr = i;
tasklet_init(&vf_info->vf2pf_bh_tasklet,
(void *)adf_vf2pf_bh_handler,
(unsigned long)vf_info);
mutex_init(&vf_info->pf2vf_lock);
ratelimit_state_init(&vf_info->vf2pf_ratelimit,
DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
}
/* Set Valid bits in AE Thread to PCIe Function Mapping */
if (hw_data->configure_iov_threads)
hw_data->configure_iov_threads(accel_dev, true);
/* Enable VF to PF interrupts for all VFs */
if (hw_data->get_pf2vf_offset)
adf_enable_vf2pf_interrupts(accel_dev, BIT_ULL(totalvfs) - 1);
/*
* Due to the hardware design, when SR-IOV and the ring arbiter
* are enabled all the VFs supported in hardware must be enabled in
* order for all the hardware resources (i.e. bundles) to be usable.
* When SR-IOV is enabled, each of the VFs will own one bundle.
*/
return pci_enable_sriov(pdev, totalvfs);
}
/**
* adf_disable_sriov() - Disable SRIOV for the device
* @accel_dev: Pointer to accel device.
*
* Function disables SRIOV for the accel device.
*
* Return: 0 on success, error code otherwise.
*/
void adf_disable_sriov(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
int totalvfs = pci_sriov_get_totalvfs(accel_to_pci_dev(accel_dev));
struct adf_accel_vf_info *vf;
int i;
if (!accel_dev->pf.vf_info)
return;
if (hw_data->get_pf2vf_offset)
adf_pf2vf_notify_restarting(accel_dev);
pci_disable_sriov(accel_to_pci_dev(accel_dev));
/* Disable VF to PF interrupts */
if (hw_data->get_pf2vf_offset)
adf_disable_vf2pf_interrupts(accel_dev, GENMASK(31, 0));
/* Clear Valid bits in AE Thread to PCIe Function Mapping */
if (hw_data->configure_iov_threads)
hw_data->configure_iov_threads(accel_dev, false);
for (i = 0, vf = accel_dev->pf.vf_info; i < totalvfs; i++, vf++) {
tasklet_disable(&vf->vf2pf_bh_tasklet);
tasklet_kill(&vf->vf2pf_bh_tasklet);
mutex_destroy(&vf->pf2vf_lock);
}
kfree(accel_dev->pf.vf_info);
accel_dev->pf.vf_info = NULL;
}
EXPORT_SYMBOL_GPL(adf_disable_sriov);
/**
* adf_sriov_configure() - Enable SRIOV for the device
* @pdev: Pointer to PCI device.
* @numvfs: Number of virtual functions (VFs) to enable.
*
* Note that the @numvfs parameter is ignored and all VFs supported by the
* device are enabled due to the design of the hardware.
*
* Function enables SRIOV for the PCI device.
*
* Return: number of VFs enabled on success, error code otherwise.
*/
int adf_sriov_configure(struct pci_dev *pdev, int numvfs)
{
struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
int totalvfs = pci_sriov_get_totalvfs(pdev);
unsigned long val;
int ret;
if (!accel_dev) {
dev_err(&pdev->dev, "Failed to find accel_dev\n");
return -EFAULT;
}
if (!iommu_present(&pci_bus_type))
dev_warn(&pdev->dev, "IOMMU should be enabled for SR-IOV to work correctly\n");
if (accel_dev->pf.vf_info) {
dev_info(&pdev->dev, "Already enabled for this device\n");
return -EINVAL;
}
if (adf_dev_started(accel_dev)) {
if (adf_devmgr_in_reset(accel_dev) ||
adf_dev_in_use(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Device busy\n");
return -EBUSY;
}
adf_dev_stop(accel_dev);
adf_dev_shutdown(accel_dev);
}
if (adf_cfg_section_add(accel_dev, ADF_KERNEL_SEC))
return -EFAULT;
val = 0;
if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
ADF_NUM_CY, (void *)&val, ADF_DEC))
return -EFAULT;
set_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
/* Allocate memory for VF info structs */
accel_dev->pf.vf_info = kcalloc(totalvfs,
sizeof(struct adf_accel_vf_info),
GFP_KERNEL);
if (!accel_dev->pf.vf_info)
return -ENOMEM;
if (adf_dev_init(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to init qat_dev%d\n",
accel_dev->accel_id);
return -EFAULT;
}
if (adf_dev_start(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to start qat_dev%d\n",
accel_dev->accel_id);
return -EFAULT;
}
ret = adf_enable_sriov(accel_dev);
if (ret)
return ret;
return numvfs;
}
EXPORT_SYMBOL_GPL(adf_sriov_configure);
int __init adf_init_pf_wq(void)
{
/* Workqueue for PF2VF responses */
pf2vf_resp_wq = alloc_workqueue("qat_pf2vf_resp_wq", WQ_MEM_RECLAIM, 0);
return !pf2vf_resp_wq ? -ENOMEM : 0;
}
void adf_exit_pf_wq(void)
{
if (pf2vf_resp_wq) {
destroy_workqueue(pf2vf_resp_wq);
pf2vf_resp_wq = NULL;
}
}