iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
91af95c143
linux/drivers/mtd/nand
History
Abhishek Sahu 91af95c143 mtd: nand: qcom: support for read location registers 
In EBI2, all codeword data will be read in FLASH_BUF_ACC buffer
and ADM will copy the data from source (FLASH_BUF_ACC) to
destination (memory for data read).

In QPIC, there is no FLASH_BUF_ACC and all the codeword data will
held in QPIC BAM FIFO buffers. It provides multiple READ_LOCATION
registers which will be used for copying the data from FIFO to
memory. The READ_LOCATION register will be used to read a
specific amount of data from a specific offset within the flash
buffer. It supports sequential offset requests. Each request is
composed of the following fields:

a. Offset within the flash buffer from which data should be
   read
b. Amount of data to be read
c. Flag bit specifying the last read request from the flash
   buffer. Following the last read request the NANDc refers to the
   buffer as empty.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-23 16:49:27 +02:00
..
atmel mtd: nand: atmel: fix of_irq_get() error check 2017-08-23 16:49:22 +02:00
bcm47xxnflash mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
brcmnand mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program 2017-04-25 14:18:42 +02:00
gpmi-nand mtd: nand: gpmi: fix typo in comment 2017-06-10 12:09:28 +02:00
ams-delta.c mtd: nand: ams-delta: return error code of nand_scan() on error 2016-11-07 14:48:41 +01:00
au1550nd.c
bf5xx_nand.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
cafe_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
cmx270_nand.c drivers/mtd: Convert remaining uses of pr_warning to pr_warn 2017-04-19 13:10:54 -07:00
cs553x_nand.c mtd: nand: cs553x: return error code of nand_scan() on error 2016-11-07 14:48:42 +01:00
davinci_nand.c mtd: nand: davinci: set ECC algorithm explicitly for HW based ECC 2017-05-15 12:00:46 +02:00
denali_dt.c mtd: nand: denali: Handle return value of clk_prepare_enable. 2017-08-23 16:49:18 +02:00
denali_pci.c mtd: nand: denali: avoid magic numbers and rename for clarification 2017-06-20 09:14:57 +02:00
denali.c mtd: nand: denali: avoid magic numbers and rename for clarification 2017-06-20 09:14:57 +02:00
denali.h mtd: nand: denali: avoid magic numbers and rename for clarification 2017-06-20 09:14:57 +02:00
diskonchip.c
docg4.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
fsl_elbc_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
fsl_ifc_nand.c mtd: nand: ifc: Initialize SRAM for all version >= 1.0 2017-06-20 09:17:25 +02:00
fsl_upm.c
fsmc_nand.c mtd: nand: Pass the CS line to ->setup_data_interface() 2017-06-01 10:09:28 +02:00
gpio.c mtd: nand: gpio: make nCE GPIO optional 2017-03-16 10:34:27 +01:00
hisi504_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
jz4740_nand.c mtd: nand: jz4740: Let the pinctrl driver configure the pins 2017-05-22 17:22:42 +02:00
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c mtd: nand: jz4780: Use mtd_set_ooblayout() to set the ooblayout 2017-05-15 12:00:36 +02:00
Kconfig mtd: nand: pxa3xx_nand: enable building on mvebu 64-bit platforms 2017-08-23 16:49:18 +02:00
lpc32xx_mlc.c mtd: nand: lpc32xx_mlc: Handle return value of clk_prepare_enable. 2017-08-23 16:49:20 +02:00
lpc32xx_slc.c mtd: nand: lpc32xx_slc: Handle return value of clk_prepare_enable. 2017-08-23 16:49:19 +02:00
Makefile mtd: nand: Cleanup/rework the atmel_nand driver 2017-04-25 14:18:29 +02:00
mpc5121_nfc.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
mtk_ecc.c mtd: nand: mtk: fix error return code in mtk_ecc_probe() 2017-08-23 16:49:23 +02:00
mtk_ecc.h mtd: nand: mediatek: add support for different MTK NAND FLASH Controller IP 2017-06-01 10:09:37 +02:00
mtk_nand.c mtd: nand: mtk: add ->setup_data_interface() hook 2017-06-25 16:54:03 +02:00
mxc_nand.c mtd: nand: mxc: Fix mxc_v1 ooblayout 2017-08-23 16:49:21 +02:00
nand_amd.c mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c 2017-03-08 23:21:22 +01:00
nand_base.c mtd: nand: remove hard-coded NAND ids length 2017-08-23 16:49:13 +02:00
nand_bbt.c mtd: nand_bbt: scan for next free bbt block if writing bbt fails 2016-09-23 09:35:16 +02:00
nand_bch.c
nand_ecc.c
nand_hynix.c mtd: nand: hynix: add support for 20nm NAND chips 2017-08-23 16:49:21 +02:00
nand_ids.c mtd: nand: drop unneeded module.h include 2017-05-22 09:42:29 +02:00
nand_macronix.c mtd: nand: Move Macronix specific initialization in nand_macronix.c 2017-03-08 23:21:23 +01:00
nand_micron.c mtd: nand: Wait for PAGEPROG to finish in drivers setting NAND_ECC_CUSTOM_PAGE_ACCESS 2017-06-01 10:09:33 +02:00
nand_samsung.c mtd: nand: samsung: warn about un-parseable ECC info 2017-05-22 09:42:29 +02:00
nand_timings.c mtd: nand: Add a few more timings to nand_sdr_timings 2016-11-07 14:48:37 +01:00
nand_toshiba.c mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c 2017-03-08 23:21:21 +01:00
nandsim.c MTD updates for 4.12-rc1: 2017-05-11 10:44:22 -07:00
ndfc.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
nuc900_nand.c
omap2.c mtd: nand: omap2: Fix partition creation via cmdline mtdparts 2017-04-25 14:18:40 +02:00
omap_elm.c
orion_nand.c mtd: orion-nand: fix build error with ARMv4 2017-08-23 16:49:18 +02:00
oxnas_nand.c mtd: oxnas_nand: Handle clk_prepare_enable/clk_disable_unprepare. 2017-08-23 16:49:19 +02:00
pasemi_nand.c mtd: nand: pasemi: return error code of nand_scan() on error 2016-11-07 14:48:45 +01:00
plat_nand.c mtd: nand: plat_nand: return error code of nand_scan() on error 2016-11-07 14:48:45 +01:00
pxa3xx_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
qcom_nandc.c mtd: nand: qcom: support for read location registers 2017-08-23 16:49:27 +02:00
r852.c
r852.h
s3c2410.c mtd: nand: Pass the CS line to ->setup_data_interface() 2017-06-01 10:09:28 +02:00
sh_flctl.c mtd: nand: sh_flctl: fix error return code in flctl_probe() 2017-08-23 16:49:23 +02:00
sharpsl.c
sm_common.c
sm_common.h
socrates_nand.c mtd: nand: socrates: use nand_scan() for nand_scan_ident/tail() combo 2016-11-07 14:48:53 +01:00
sunxi_nand.c mtd: nand: sunxi: explicitly request exclusive reset control 2017-08-23 16:49:21 +02:00
tango_nand.c This pull request contains the following core changes: 2017-07-07 18:03:11 -07:00
tmio_nand.c mtd: nand: tmio: return error code of nand_scan() on error 2016-11-07 14:48:44 +01:00
txx9ndfmc.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
vf610_nfc.c mtd: nand: vf610: Remove unneeded pinctrl_pm_select_default_state() 2017-08-23 16:49:14 +02:00
xway_nand.c mtd: update my email address 2017-02-08 12:49:27 -08:00