linux/drivers/usb
Andreas Ruprecht f6a55884d7 USB / PM: Remove unneeded #ifdef and associated dead code
In commit ceb6c9c862 ("USB / PM: Drop CONFIG_PM_RUNTIME from the
USB core"), all occurrences of CONFIG_PM_RUNTIME in the USB core
code were replaced by CONFIG_PM. This created the following structure
of #ifdef blocks in drivers/usb/core/hub.c:

 [...]
 #ifdef CONFIG_PM
 #ifdef CONFIG_PM
 /* always on / undead */
 #else
 /* dead */
 #endif
 [...]

This patch removes unnecessary inner "#ifdef CONFIG_PM" as well as
the corresponding dead #else block. This inconsistency was found using
the undertaker-checkpatch tool.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-08 23:42:25 +01:00
..
atm
c67x00 usb: c67x00: drop owner assignment from platform_drivers 2014-10-20 16:21:46 +02:00
chipidea Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start" 2015-01-09 09:45:30 -08:00
class USB: cdc-acm: check for valid interfaces 2014-11-24 17:21:42 -08:00
common usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
core USB / PM: Remove unneeded #ifdef and associated dead code 2015-02-08 23:42:25 +01:00
dwc2 usb: dwc2: call dwc2_is_controller_alive() under spinlock 2015-01-19 09:41:49 -06:00
dwc3 usb: dwc3: gadget: Stop TRB preparation after limit is reached 2015-01-14 11:29:05 -06:00
early
gadget usb: fixes for v3.19-rc5 2015-01-12 10:51:04 -08:00
host OHCI: add a quirk for ULi M5237 blocking on reset 2015-01-09 12:40:37 -08:00
image
misc Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mon
musb usb: musb: stuff leak of struct usb_hcd 2014-12-22 10:36:24 -06:00
phy usb: phy: never defer probe in non-OF case 2015-01-19 12:50:27 -06:00
renesas_usbhs usb: renesas_usbhs: expand USB-DMAC channels for R-Car Gen2 2014-11-12 09:11:31 -06:00
serial usb: serial: handle -ENODEV quietly in generic_submit_read_urb 2015-01-12 10:23:54 +01:00
storage usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller 2015-01-25 21:20:42 +08:00
usbip Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
wusbcore wusb: replace memset by memzero_explicit 2014-12-02 16:15:02 -08:00
Kconfig usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.