linux/drivers/net/wireless/ath/ath10k
David S. Miller c8ac18f200 Major changes:
iwlwifi:
 
 * more work for new devices (4165 / 8260)
 * cleanups / improvemnts in rate control
 * fixes for TDLS
 * major statistics work from Johannes - more to come
 * improvements for the fw error dump infrastructure
 * usual amount of small fixes here and there (scan, D0i3 etc...)
 * add support for beamforming
 * enable stuck queue detection for iwlmvm
 * a few fixes for EBS scan
 * fixes for various failure paths
 * improvements for TDLS Offchannel
 
 wil6210:
 
 * performance tuning
 * some AP features
 
 brcm80211:
 
 * rework some code in SDIO part of the brcmfmac driver related to
   suspend/resume that were found doing stress testing
 * in PCIe part scheduling of worker thread needed to be relaxed
 * minor fixes and exposing firmware revision information to
   user-space, ie. ethtool.
 
 mwifiex:
 
 * enhancements for change virtual interface handling
 * remove coupling between netdev and FW supported interface
   combination, now conversion from any type of supported interface
   types to any other type is possible
 * DFS support in AP mode
 
 ath9k:
 
 * fix calibration issues on some boards
 * Wake-on-WLAN improvements
 
 ath10k:
 
 * add support for qca6174 hardware
 * enable RX batching to reduce CPU load
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU1fUoAAoJEG4XJFUm622bnjMH/25f2kyLAJSLJmiIhpEcYlNJ
 CJMAYsSTcqhKaMEbx742StUUDH3pa1oV4mQ5csVa2QJIsS90WzPpB1eRnNtQ69Nj
 89Zfwa6bbX0TXDgw1Aa28NewPY/3xWpCjI03HBQaMIncToWv3/dzNUr0bEmIuBds
 wsr5Y+fy80VKnkoXG7XzGFOqmxxFwNS+UF3M1WNtQ+xcr9rK3/LLxyWFy84S9UIe
 4lVOb+df91YFIJeLs28/hfTiRhvV0fWIbupGv8UhuBMho+F0dpLvra+3xksEqALu
 4+AzI0j9GjqFfMzbmRBcPcT4Rl37nLmvQ+7XokrFgAYS5zp7OGylOMU3nHyvkuY=
 =iL8v
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2015-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Major changes:

iwlwifi:

* more work for new devices (4165 / 8260)
* cleanups / improvemnts in rate control
* fixes for TDLS
* major statistics work from Johannes - more to come
* improvements for the fw error dump infrastructure
* usual amount of small fixes here and there (scan, D0i3 etc...)
* add support for beamforming
* enable stuck queue detection for iwlmvm
* a few fixes for EBS scan
* fixes for various failure paths
* improvements for TDLS Offchannel

wil6210:

* performance tuning
* some AP features

brcm80211:

* rework some code in SDIO part of the brcmfmac driver related to
  suspend/resume that were found doing stress testing
* in PCIe part scheduling of worker thread needed to be relaxed
* minor fixes and exposing firmware revision information to
  user-space, ie. ethtool.

mwifiex:

* enhancements for change virtual interface handling
* remove coupling between netdev and FW supported interface
  combination, now conversion from any type of supported interface
  types to any other type is possible
* DFS support in AP mode

ath9k:

* fix calibration issues on some boards
* Wake-on-WLAN improvements

ath10k:

* add support for qca6174 hardware
* enable RX batching to reduce CPU load

Conflicts:
	drivers/net/wireless/rtlwifi/pci.c

Conflict resolution is to get rid of the 'end' label and keep
the rest.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 12:13:58 -08:00
..
bmi.c ath10k: improve logging to include dev id 2014-08-26 19:04:48 +03:00
bmi.h ath10k: fix use of multiple blank lines 2014-09-18 10:45:20 +03:00
ce.c ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
ce.h ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
core.c ath10k: enable qca6174 hw3.2 2015-02-04 09:22:01 +02:00
core.h ath10k: add log level configuration for fw_dbglog 2015-02-04 09:20:08 +02:00
debug.c ath10k: add log level configuration for fw_dbglog 2015-02-04 09:20:08 +02:00
debug.h ath10k: Implement sta_add_debugfs 2015-01-13 16:13:13 +02:00
debugfs_sta.c ath10k: add support to send delba 2015-01-13 16:13:47 +02:00
hif.h ath10k: remove transfer_id from ath10k_hif_cb::tx_completion 2014-12-01 09:13:36 +02:00
htc.c ath10k: fixup wait_for_completion_timeout return handling 2015-01-13 16:19:59 +02:00
htc.h ath10k: fix use of multiple blank lines 2014-09-18 10:45:20 +03:00
htt_rx.c ath10k: add support for qca6174 Rx descriptors 2015-01-27 15:59:34 +02:00
htt_tx.c ath10k: Use TX cksum offload only for CHECKSUM_PARTIAL 2015-02-04 09:19:03 +02:00
htt.c ath10k: fixup wait_for_completion_timeout return handling 2015-01-13 16:19:59 +02:00
htt.h ath10k: use idr api for msdu_ids 2015-01-27 16:16:59 +02:00
hw.c ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
hw.h ath10k: enable qca6174 hw3.2 2015-02-04 09:22:01 +02:00
Kconfig ath10k: ATH10K_DEBUGFS depends on DEBUG_FS 2014-09-10 14:17:45 +03:00
mac.c Major changes: 2015-02-09 12:13:58 -08:00
mac.h ath10k: fix shared WEP 2014-11-26 08:37:08 +02:00
Makefile ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
pci.c ath10k: disable irqs after fw crash 2015-01-27 16:22:43 +02:00
pci.h ath10k: fix target wakeup timeout 2015-01-29 12:26:28 +02:00
rx_desc.h ath10k: add support for qca6174 Rx descriptors 2015-01-27 15:59:34 +02:00
spectral.c ath10k: introduce wmi ops 2014-12-08 17:39:08 +02:00
spectral.h ath10k: clean up phyerr code 2014-09-23 12:31:54 +03:00
targaddrs.h ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
testmode_i.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
testmode.c ath10k: introduce wmi ops 2014-12-08 17:39:08 +02:00
testmode.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
thermal.c ath10k: fix hwmon temperature input units 2015-01-15 12:36:34 +02:00
thermal.h ath10k: add thermal sensor device support 2014-12-23 17:18:41 +02:00
trace.c
trace.h ath10k: implement diag event 2015-01-27 15:50:59 +02:00
txrx.c ath10k: use idr api for msdu_ids 2015-01-27 16:16:59 +02:00
txrx.h ath10k: fix Rx aggregation reordering 2014-07-25 11:15:39 +03:00
wmi-ops.h ath10k: add log level configuration for fw_dbglog 2015-02-04 09:20:08 +02:00
wmi-tlv.c ath10k: add log level configuration for fw_dbglog 2015-02-04 09:20:08 +02:00
wmi-tlv.h ath10k: implement sta keepalive command 2015-01-29 12:15:00 +02:00
wmi.c Merge ath-next from ath.git 2015-02-06 16:14:11 +02:00
wmi.h ath10k: Enable the MCS8 and MCS9 at 2.4G band 2015-01-29 12:25:17 +02:00