e9fdf122cf
With the previous commit there is no need for the lowlevel driver any more to specify it it uses two or three cells. So simplify accordingly. The only non-trival change affects the pwm-rockchip driver: It used to only support three cells if the hardware supports polarity. Now the default number depends on the device tree which has to match hardware anyhow (and if it doesn't the error is just a bit delayed as a PWM handle with an inverted setting is catched when pwm_apply_state() is called). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
265 lines
6.2 KiB
C
265 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* drivers/pwm/pwm-vt8500.c
|
|
*
|
|
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
|
|
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
|
|
/*
|
|
* SoC architecture allocates register space for 4 PWMs but only
|
|
* 2 are currently implemented.
|
|
*/
|
|
#define VT8500_NR_PWMS 2
|
|
|
|
#define REG_CTRL(pwm) (((pwm) << 4) + 0x00)
|
|
#define REG_SCALAR(pwm) (((pwm) << 4) + 0x04)
|
|
#define REG_PERIOD(pwm) (((pwm) << 4) + 0x08)
|
|
#define REG_DUTY(pwm) (((pwm) << 4) + 0x0C)
|
|
#define REG_STATUS 0x40
|
|
|
|
#define CTRL_ENABLE BIT(0)
|
|
#define CTRL_INVERT BIT(1)
|
|
#define CTRL_AUTOLOAD BIT(2)
|
|
#define CTRL_STOP_IMM BIT(3)
|
|
#define CTRL_LOAD_PRESCALE BIT(4)
|
|
#define CTRL_LOAD_PERIOD BIT(5)
|
|
|
|
#define STATUS_CTRL_UPDATE BIT(0)
|
|
#define STATUS_SCALAR_UPDATE BIT(1)
|
|
#define STATUS_PERIOD_UPDATE BIT(2)
|
|
#define STATUS_DUTY_UPDATE BIT(3)
|
|
#define STATUS_ALL_UPDATE 0x0F
|
|
|
|
struct vt8500_chip {
|
|
struct pwm_chip chip;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
};
|
|
|
|
#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
|
|
|
|
#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
|
|
static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
|
|
{
|
|
int loops = msecs_to_loops(10);
|
|
u32 mask = bitmask << (nr << 8);
|
|
|
|
while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
|
|
cpu_relax();
|
|
|
|
if (unlikely(!loops))
|
|
dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
|
|
mask);
|
|
}
|
|
|
|
static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
unsigned long long c;
|
|
unsigned long period_cycles, prescale, pv, dc;
|
|
int err;
|
|
u32 val;
|
|
|
|
err = clk_enable(vt8500->clk);
|
|
if (err < 0) {
|
|
dev_err(chip->dev, "failed to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
c = clk_get_rate(vt8500->clk);
|
|
c = c * period_ns;
|
|
do_div(c, 1000000000);
|
|
period_cycles = c;
|
|
|
|
if (period_cycles < 1)
|
|
period_cycles = 1;
|
|
prescale = (period_cycles - 1) / 4096;
|
|
pv = period_cycles / (prescale + 1) - 1;
|
|
if (pv > 4095)
|
|
pv = 4095;
|
|
|
|
if (prescale > 1023) {
|
|
clk_disable(vt8500->clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
c = (unsigned long long)pv * duty_ns;
|
|
do_div(c, period_ns);
|
|
dc = c;
|
|
|
|
writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);
|
|
|
|
writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);
|
|
|
|
writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val |= CTRL_AUTOLOAD;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
clk_disable(vt8500->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
int err;
|
|
u32 val;
|
|
|
|
err = clk_enable(vt8500->clk);
|
|
if (err < 0) {
|
|
dev_err(chip->dev, "failed to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val |= CTRL_ENABLE;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
u32 val;
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val &= ~CTRL_ENABLE;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
clk_disable(vt8500->clk);
|
|
}
|
|
|
|
static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
enum pwm_polarity polarity)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
u32 val;
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
|
|
if (polarity == PWM_POLARITY_INVERSED)
|
|
val |= CTRL_INVERT;
|
|
else
|
|
val &= ~CTRL_INVERT;
|
|
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops vt8500_pwm_ops = {
|
|
.enable = vt8500_pwm_enable,
|
|
.disable = vt8500_pwm_disable,
|
|
.config = vt8500_pwm_config,
|
|
.set_polarity = vt8500_pwm_set_polarity,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id vt8500_pwm_dt_ids[] = {
|
|
{ .compatible = "via,vt8500-pwm", },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
|
|
|
|
static int vt8500_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct vt8500_chip *chip;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret;
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "invalid devicetree node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (chip == NULL)
|
|
return -ENOMEM;
|
|
|
|
chip->chip.dev = &pdev->dev;
|
|
chip->chip.ops = &vt8500_pwm_ops;
|
|
chip->chip.npwm = VT8500_NR_PWMS;
|
|
|
|
chip->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(chip->clk)) {
|
|
dev_err(&pdev->dev, "clock source not specified\n");
|
|
return PTR_ERR(chip->clk);
|
|
}
|
|
|
|
chip->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(chip->base))
|
|
return PTR_ERR(chip->base);
|
|
|
|
ret = clk_prepare(chip->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to prepare clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = pwmchip_add(&chip->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip\n");
|
|
clk_unprepare(chip->clk);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, chip);
|
|
return ret;
|
|
}
|
|
|
|
static int vt8500_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct vt8500_chip *chip;
|
|
|
|
chip = platform_get_drvdata(pdev);
|
|
if (chip == NULL)
|
|
return -ENODEV;
|
|
|
|
clk_unprepare(chip->clk);
|
|
|
|
return pwmchip_remove(&chip->chip);
|
|
}
|
|
|
|
static struct platform_driver vt8500_pwm_driver = {
|
|
.probe = vt8500_pwm_probe,
|
|
.remove = vt8500_pwm_remove,
|
|
.driver = {
|
|
.name = "vt8500-pwm",
|
|
.of_match_table = vt8500_pwm_dt_ids,
|
|
},
|
|
};
|
|
module_platform_driver(vt8500_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("VT8500 PWM Driver");
|
|
MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
|
|
MODULE_LICENSE("GPL v2");
|