944b5c7146
SPMI devices typically have a single address cell and no size cell,
i.e. reg = <0xf000> for the audio codec instead of reg = <0xf000 0x200>.
The example is a bit misleading because it uses the latter. Copying
this into the device tree would be incorrect and was fixed before for
pm8916.dtsi in commit c2f0cbb57dba ("arm64: dts: qcom: pm8916: Remove
invalid reg size from wcd_codec").
Make the example more clear by adding the outer "pmic" node which
specifies the same #address/size-cells that would be used in the
real deivce tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-1-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
169 lines
4.6 KiB
YAML
169 lines
4.6 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm PM8916 WCD Analog Audio Codec
|
|
|
|
maintainers:
|
|
- Konrad Dybcio <konradybcio@kernel.org>
|
|
|
|
description:
|
|
The analog WCD audio codec found on Qualcomm PM8916 PMIC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,pm8916-wcd-analog-codec
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
reg-names:
|
|
items:
|
|
- const: pmic-codec-core
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: mclk
|
|
|
|
interrupts:
|
|
maxItems: 14
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: cdc_spk_cnp_int
|
|
- const: cdc_spk_clip_int
|
|
- const: cdc_spk_ocp_int
|
|
- const: mbhc_ins_rem_det1
|
|
- const: mbhc_but_rel_det
|
|
- const: mbhc_but_press_det
|
|
- const: mbhc_ins_rem_det
|
|
- const: mbhc_switch_int
|
|
- const: cdc_ear_ocp_int
|
|
- const: cdc_hphr_ocp_int
|
|
- const: cdc_hphl_ocp_det
|
|
- const: cdc_ear_cnp_int
|
|
- const: cdc_hphr_cnp_int
|
|
- const: cdc_hphl_cnp_int
|
|
|
|
vdd-cdc-io-supply:
|
|
description: 1.8V buck supply
|
|
|
|
vdd-cdc-tx-rx-cx-supply:
|
|
description: 1.8V SIDO buck supply
|
|
|
|
vdd-micbias-supply:
|
|
description: micbias supply
|
|
|
|
qcom,mbhc-vthreshold-low:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description:
|
|
Array of 5 threshold voltages in mV for 5-button detection on
|
|
headset when MBHC is powered by an internal current source.
|
|
minItems: 5
|
|
maxItems: 5
|
|
|
|
qcom,mbhc-vthreshold-high:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description:
|
|
Array of 5 threshold voltages in mV for 5-button detection on
|
|
headset when MBHC is powered from micbias.
|
|
minItems: 5
|
|
maxItems: 5
|
|
|
|
qcom,micbias-lvl:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Voltage (mV) for Mic Bias
|
|
|
|
qcom,hphl-jack-type-normally-open:
|
|
type: boolean
|
|
description:
|
|
True if the HPHL pin on the jack is NO (Normally Open), false if it's
|
|
NC (Normally Closed).
|
|
|
|
qcom,gnd-jack-type-normally-open:
|
|
type: boolean
|
|
description:
|
|
True if the GND pin on the jack is NO (Normally Open), false if it's
|
|
NC (Normally Closed).
|
|
|
|
qcom,micbias1-ext-cap:
|
|
type: boolean
|
|
description:
|
|
True if micbias1 has an external capacitor.
|
|
|
|
qcom,micbias2-ext-cap:
|
|
type: boolean
|
|
description:
|
|
True if micbias2 has an external capacitor.
|
|
|
|
"#sound-dai-cells":
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
pmic@1 {
|
|
compatible = "qcom,pm8916", "qcom,spmi-pmic";
|
|
reg = <0x1 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
audio-codec@f000 {
|
|
compatible = "qcom,pm8916-wcd-analog-codec";
|
|
reg = <0xf000>;
|
|
reg-names = "pmic-codec-core";
|
|
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
|
|
clock-names = "mclk";
|
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
|
interrupt-parent = <&spmi_bus>;
|
|
interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x1 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x2 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x3 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x4 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x5 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x6 IRQ_TYPE_NONE>,
|
|
<0x1 0xf0 0x7 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x0 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x1 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x2 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x3 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x4 IRQ_TYPE_NONE>,
|
|
<0x1 0xf1 0x5 IRQ_TYPE_NONE>;
|
|
interrupt-names = "cdc_spk_cnp_int",
|
|
"cdc_spk_clip_int",
|
|
"cdc_spk_ocp_int",
|
|
"mbhc_ins_rem_det1",
|
|
"mbhc_but_rel_det",
|
|
"mbhc_but_press_det",
|
|
"mbhc_ins_rem_det",
|
|
"mbhc_switch_int",
|
|
"cdc_ear_ocp_int",
|
|
"cdc_hphr_ocp_int",
|
|
"cdc_hphl_ocp_det",
|
|
"cdc_ear_cnp_int",
|
|
"cdc_hphr_cnp_int",
|
|
"cdc_hphl_cnp_int";
|
|
vdd-cdc-io-supply = <&pm8916_l5>;
|
|
vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
|
|
vdd-micbias-supply = <&pm8916_l13>;
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
};
|