12e675503d
When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Gabriel Somlo <gsomlo@gmail.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-33-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
481 lines
11 KiB
C
481 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* LiteUART serial controller (LiteX) Driver
|
|
*
|
|
* Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/console.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/litex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/xarray.h>
|
|
|
|
/*
|
|
* CSRs definitions (base address offsets + width)
|
|
*
|
|
* The definitions below are true for LiteX SoC configured for 8-bit CSR Bus,
|
|
* 32-bit aligned.
|
|
*
|
|
* Supporting other configurations might require new definitions or a more
|
|
* generic way of indexing the LiteX CSRs.
|
|
*
|
|
* For more details on how CSRs are defined and handled in LiteX, see comments
|
|
* in the LiteX SoC Driver: drivers/soc/litex/litex_soc_ctrl.c
|
|
*/
|
|
#define OFF_RXTX 0x00
|
|
#define OFF_TXFULL 0x04
|
|
#define OFF_RXEMPTY 0x08
|
|
#define OFF_EV_STATUS 0x0c
|
|
#define OFF_EV_PENDING 0x10
|
|
#define OFF_EV_ENABLE 0x14
|
|
|
|
/* events */
|
|
#define EV_TX BIT(0)
|
|
#define EV_RX BIT(1)
|
|
|
|
struct liteuart_port {
|
|
struct uart_port port;
|
|
struct timer_list timer;
|
|
u8 irq_reg;
|
|
};
|
|
|
|
#define to_liteuart_port(port) container_of(port, struct liteuart_port, port)
|
|
|
|
static DEFINE_XARRAY_FLAGS(liteuart_array, XA_FLAGS_ALLOC);
|
|
|
|
#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
|
|
static struct console liteuart_console;
|
|
#endif
|
|
|
|
static struct uart_driver liteuart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = KBUILD_MODNAME,
|
|
.dev_name = "ttyLXU",
|
|
.major = 0,
|
|
.minor = 0,
|
|
.nr = CONFIG_SERIAL_LITEUART_MAX_PORTS,
|
|
#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
|
|
.cons = &liteuart_console,
|
|
#endif
|
|
};
|
|
|
|
static void liteuart_update_irq_reg(struct uart_port *port, bool set, u8 mask)
|
|
{
|
|
struct liteuart_port *uart = to_liteuart_port(port);
|
|
|
|
if (set)
|
|
uart->irq_reg |= mask;
|
|
else
|
|
uart->irq_reg &= ~mask;
|
|
|
|
if (port->irq)
|
|
litex_write8(port->membase + OFF_EV_ENABLE, uart->irq_reg);
|
|
}
|
|
|
|
static void liteuart_stop_tx(struct uart_port *port)
|
|
{
|
|
liteuart_update_irq_reg(port, false, EV_TX);
|
|
}
|
|
|
|
static void liteuart_start_tx(struct uart_port *port)
|
|
{
|
|
liteuart_update_irq_reg(port, true, EV_TX);
|
|
}
|
|
|
|
static void liteuart_stop_rx(struct uart_port *port)
|
|
{
|
|
struct liteuart_port *uart = to_liteuart_port(port);
|
|
|
|
/* just delete timer */
|
|
del_timer(&uart->timer);
|
|
}
|
|
|
|
static void liteuart_rx_chars(struct uart_port *port)
|
|
{
|
|
unsigned char __iomem *membase = port->membase;
|
|
u8 ch;
|
|
|
|
while (!litex_read8(membase + OFF_RXEMPTY)) {
|
|
ch = litex_read8(membase + OFF_RXTX);
|
|
port->icount.rx++;
|
|
|
|
/* necessary for RXEMPTY to refresh its value */
|
|
litex_write8(membase + OFF_EV_PENDING, EV_RX);
|
|
|
|
/* no overflow bits in status */
|
|
if (!(uart_handle_sysrq_char(port, ch)))
|
|
uart_insert_char(port, 1, 0, ch, TTY_NORMAL);
|
|
}
|
|
|
|
tty_flip_buffer_push(&port->state->port);
|
|
}
|
|
|
|
static void liteuart_tx_chars(struct uart_port *port)
|
|
{
|
|
u8 ch;
|
|
|
|
uart_port_tx(port, ch,
|
|
!litex_read8(port->membase + OFF_TXFULL),
|
|
litex_write8(port->membase + OFF_RXTX, ch));
|
|
}
|
|
|
|
static irqreturn_t liteuart_interrupt(int irq, void *data)
|
|
{
|
|
struct liteuart_port *uart = data;
|
|
struct uart_port *port = &uart->port;
|
|
unsigned long flags;
|
|
u8 isr;
|
|
|
|
/*
|
|
* if polling, the context would be "in_serving_softirq", so use
|
|
* irq[save|restore] spin_lock variants to cover all possibilities
|
|
*/
|
|
uart_port_lock_irqsave(port, &flags);
|
|
isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg;
|
|
if (isr & EV_RX)
|
|
liteuart_rx_chars(port);
|
|
if (isr & EV_TX)
|
|
liteuart_tx_chars(port);
|
|
uart_port_unlock_irqrestore(port, flags);
|
|
|
|
return IRQ_RETVAL(isr);
|
|
}
|
|
|
|
static void liteuart_timer(struct timer_list *t)
|
|
{
|
|
struct liteuart_port *uart = from_timer(uart, t, timer);
|
|
struct uart_port *port = &uart->port;
|
|
|
|
liteuart_interrupt(0, port);
|
|
mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
|
|
}
|
|
|
|
static unsigned int liteuart_tx_empty(struct uart_port *port)
|
|
{
|
|
/* not really tx empty, just checking if tx is not full */
|
|
if (!litex_read8(port->membase + OFF_TXFULL))
|
|
return TIOCSER_TEMT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void liteuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
/* modem control register is not present in LiteUART */
|
|
}
|
|
|
|
static unsigned int liteuart_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static int liteuart_startup(struct uart_port *port)
|
|
{
|
|
struct liteuart_port *uart = to_liteuart_port(port);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (port->irq) {
|
|
ret = request_irq(port->irq, liteuart_interrupt, 0,
|
|
KBUILD_MODNAME, uart);
|
|
if (ret) {
|
|
dev_warn(port->dev,
|
|
"line %d irq %d failed: switch to polling\n",
|
|
port->line, port->irq);
|
|
port->irq = 0;
|
|
}
|
|
}
|
|
|
|
uart_port_lock_irqsave(port, &flags);
|
|
/* only enabling rx irqs during startup */
|
|
liteuart_update_irq_reg(port, true, EV_RX);
|
|
uart_port_unlock_irqrestore(port, flags);
|
|
|
|
if (!port->irq) {
|
|
timer_setup(&uart->timer, liteuart_timer, 0);
|
|
mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void liteuart_shutdown(struct uart_port *port)
|
|
{
|
|
struct liteuart_port *uart = to_liteuart_port(port);
|
|
unsigned long flags;
|
|
|
|
uart_port_lock_irqsave(port, &flags);
|
|
liteuart_update_irq_reg(port, false, EV_RX | EV_TX);
|
|
uart_port_unlock_irqrestore(port, flags);
|
|
|
|
if (port->irq)
|
|
free_irq(port->irq, port);
|
|
else
|
|
del_timer_sync(&uart->timer);
|
|
}
|
|
|
|
static void liteuart_set_termios(struct uart_port *port, struct ktermios *new,
|
|
const struct ktermios *old)
|
|
{
|
|
unsigned int baud;
|
|
unsigned long flags;
|
|
|
|
uart_port_lock_irqsave(port, &flags);
|
|
|
|
/* update baudrate */
|
|
baud = uart_get_baud_rate(port, new, old, 0, 460800);
|
|
uart_update_timeout(port, new->c_cflag, baud);
|
|
|
|
uart_port_unlock_irqrestore(port, flags);
|
|
}
|
|
|
|
static const char *liteuart_type(struct uart_port *port)
|
|
{
|
|
return "liteuart";
|
|
}
|
|
|
|
static void liteuart_config_port(struct uart_port *port, int flags)
|
|
{
|
|
/*
|
|
* Driver core for serial ports forces a non-zero value for port type.
|
|
* Write an arbitrary value here to accommodate the serial core driver,
|
|
* as ID part of UAPI is redundant.
|
|
*/
|
|
port->type = 1;
|
|
}
|
|
|
|
static int liteuart_verify_port(struct uart_port *port,
|
|
struct serial_struct *ser)
|
|
{
|
|
if (port->type != PORT_UNKNOWN && ser->type != 1)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct uart_ops liteuart_ops = {
|
|
.tx_empty = liteuart_tx_empty,
|
|
.set_mctrl = liteuart_set_mctrl,
|
|
.get_mctrl = liteuart_get_mctrl,
|
|
.stop_tx = liteuart_stop_tx,
|
|
.start_tx = liteuart_start_tx,
|
|
.stop_rx = liteuart_stop_rx,
|
|
.startup = liteuart_startup,
|
|
.shutdown = liteuart_shutdown,
|
|
.set_termios = liteuart_set_termios,
|
|
.type = liteuart_type,
|
|
.config_port = liteuart_config_port,
|
|
.verify_port = liteuart_verify_port,
|
|
};
|
|
|
|
static int liteuart_probe(struct platform_device *pdev)
|
|
{
|
|
struct liteuart_port *uart;
|
|
struct uart_port *port;
|
|
struct xa_limit limit;
|
|
int dev_id, ret;
|
|
|
|
uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL);
|
|
if (!uart)
|
|
return -ENOMEM;
|
|
|
|
port = &uart->port;
|
|
|
|
/* get membase */
|
|
port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
|
if (IS_ERR(port->membase))
|
|
return PTR_ERR(port->membase);
|
|
|
|
ret = platform_get_irq_optional(pdev, 0);
|
|
if (ret < 0 && ret != -ENXIO)
|
|
return ret;
|
|
if (ret > 0)
|
|
port->irq = ret;
|
|
|
|
/* look for aliases; auto-enumerate for free index if not found */
|
|
dev_id = of_alias_get_id(pdev->dev.of_node, "serial");
|
|
if (dev_id < 0)
|
|
limit = XA_LIMIT(0, CONFIG_SERIAL_LITEUART_MAX_PORTS);
|
|
else
|
|
limit = XA_LIMIT(dev_id, dev_id);
|
|
|
|
ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* values not from device tree */
|
|
port->dev = &pdev->dev;
|
|
port->iotype = UPIO_MEM;
|
|
port->flags = UPF_BOOT_AUTOCONF;
|
|
port->ops = &liteuart_ops;
|
|
port->fifosize = 16;
|
|
port->type = PORT_UNKNOWN;
|
|
port->line = dev_id;
|
|
spin_lock_init(&port->lock);
|
|
|
|
platform_set_drvdata(pdev, port);
|
|
|
|
ret = uart_add_one_port(&liteuart_driver, &uart->port);
|
|
if (ret)
|
|
goto err_erase_id;
|
|
|
|
return 0;
|
|
|
|
err_erase_id:
|
|
xa_erase(&liteuart_array, dev_id);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int liteuart_remove(struct platform_device *pdev)
|
|
{
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
unsigned int line = port->line;
|
|
|
|
uart_remove_one_port(&liteuart_driver, port);
|
|
xa_erase(&liteuart_array, line);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id liteuart_of_match[] = {
|
|
{ .compatible = "litex,liteuart" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, liteuart_of_match);
|
|
|
|
static struct platform_driver liteuart_platform_driver = {
|
|
.probe = liteuart_probe,
|
|
.remove = liteuart_remove,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = liteuart_of_match,
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
|
|
|
|
static void liteuart_putchar(struct uart_port *port, unsigned char ch)
|
|
{
|
|
while (litex_read8(port->membase + OFF_TXFULL))
|
|
cpu_relax();
|
|
|
|
litex_write8(port->membase + OFF_RXTX, ch);
|
|
}
|
|
|
|
static void liteuart_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct liteuart_port *uart;
|
|
struct uart_port *port;
|
|
unsigned long flags;
|
|
|
|
uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index);
|
|
port = &uart->port;
|
|
|
|
uart_port_lock_irqsave(port, &flags);
|
|
uart_console_write(port, s, count, liteuart_putchar);
|
|
uart_port_unlock_irqrestore(port, flags);
|
|
}
|
|
|
|
static int liteuart_console_setup(struct console *co, char *options)
|
|
{
|
|
struct liteuart_port *uart;
|
|
struct uart_port *port;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index);
|
|
if (!uart)
|
|
return -ENODEV;
|
|
|
|
port = &uart->port;
|
|
if (!port->membase)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console liteuart_console = {
|
|
.name = KBUILD_MODNAME,
|
|
.write = liteuart_console_write,
|
|
.device = uart_console_device,
|
|
.setup = liteuart_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &liteuart_driver,
|
|
};
|
|
|
|
static int __init liteuart_console_init(void)
|
|
{
|
|
register_console(&liteuart_console);
|
|
|
|
return 0;
|
|
}
|
|
console_initcall(liteuart_console_init);
|
|
|
|
static void early_liteuart_write(struct console *console, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct earlycon_device *device = console->data;
|
|
struct uart_port *port = &device->port;
|
|
|
|
uart_console_write(port, s, count, liteuart_putchar);
|
|
}
|
|
|
|
static int __init early_liteuart_setup(struct earlycon_device *device,
|
|
const char *options)
|
|
{
|
|
if (!device->port.membase)
|
|
return -ENODEV;
|
|
|
|
device->con->write = early_liteuart_write;
|
|
return 0;
|
|
}
|
|
|
|
OF_EARLYCON_DECLARE(liteuart, "litex,liteuart", early_liteuart_setup);
|
|
#endif /* CONFIG_SERIAL_LITEUART_CONSOLE */
|
|
|
|
static int __init liteuart_init(void)
|
|
{
|
|
int res;
|
|
|
|
res = uart_register_driver(&liteuart_driver);
|
|
if (res)
|
|
return res;
|
|
|
|
res = platform_driver_register(&liteuart_platform_driver);
|
|
if (res)
|
|
uart_unregister_driver(&liteuart_driver);
|
|
|
|
return res;
|
|
}
|
|
|
|
static void __exit liteuart_exit(void)
|
|
{
|
|
platform_driver_unregister(&liteuart_platform_driver);
|
|
uart_unregister_driver(&liteuart_driver);
|
|
}
|
|
|
|
module_init(liteuart_init);
|
|
module_exit(liteuart_exit);
|
|
|
|
MODULE_AUTHOR("Antmicro <www.antmicro.com>");
|
|
MODULE_DESCRIPTION("LiteUART serial driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:liteuart");
|