cec148c247
Most of the protocol modules for the pata_parport driver are missing a module description, causing warnings such as: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_parport/aten.o when compiling with W=1. Add the missing MODULE_DESCRIPTION() definitions to avoid these warnings. While at it, also add the missing MODULE_AUTHOR() definitions. Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
309 lines
6.4 KiB
C
309 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* (c) 1997-1998 Grant R. Guenther <grant@torque.net>
|
|
*
|
|
* This is a low-level driver for the KBIC-951A and KBIC-971A
|
|
* parallel to IDE adapter chips from KingByte Information Systems.
|
|
*
|
|
* The chips are almost identical, however, the wakeup code
|
|
* required for the 971A interferes with the correct operation of
|
|
* the 951A, so this driver registers itself twice, once for
|
|
* each chip.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#include <asm/io.h>
|
|
#include "pata_parport.h"
|
|
|
|
#define r12w() (delay_p, inw(pi->port + 1) & 0xffff)
|
|
|
|
#define j44(a, b) ((((a >> 4) & 0x0f) | (b & 0xf0)) ^ 0x88)
|
|
#define j53(w) (((w >> 3) & 0x1f) | ((w >> 4) & 0xe0))
|
|
|
|
|
|
/*
|
|
* cont = 0 - access the IDE register file
|
|
* cont = 1 - access the IDE command set
|
|
*/
|
|
static int cont_map[2] = { 0x80, 0x40 };
|
|
|
|
static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr)
|
|
{
|
|
int a, b, s;
|
|
|
|
s = cont_map[cont];
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
w0(regr | 0x18 | s); w2(4); w2(6); w2(4); w2(1); w0(8);
|
|
a = r1(); w0(0x28); b = r1(); w2(4);
|
|
return j44(a, b);
|
|
case 1:
|
|
w0(regr|0x38 | s); w2(4); w2(6); w2(4); w2(5); w0(8);
|
|
a = r12w(); w2(4);
|
|
return j53(a);
|
|
case 2:
|
|
w0(regr | 0x08 | s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
|
|
a = r0(); w2(4);
|
|
return a;
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
|
|
a = r4(); b = r4(); w2(4); w2(0); w2(4);
|
|
return a;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
|
|
{
|
|
int s = cont_map[cont];
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
w0(regr | 0x10 | s); w2(4); w2(6); w2(4);
|
|
w0(val); w2(5); w2(4);
|
|
break;
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
|
|
w4(val); w4(val);
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void k951_connect(struct pi_adapter *pi)
|
|
{
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
w2(4);
|
|
}
|
|
|
|
static void k951_disconnect(struct pi_adapter *pi)
|
|
{
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
#define CCP(x) \
|
|
do { \
|
|
w2(0xc4); w0(0xaa); w0(0x55); \
|
|
w0(0); w0(0xff); w0(0x87); \
|
|
w0(0x78); w0(x); w2(0xc5); \
|
|
w2(0xc4); w0(0xff); \
|
|
} while (0)
|
|
|
|
static void k971_connect(struct pi_adapter *pi)
|
|
{
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
CCP(0x20);
|
|
w2(4);
|
|
}
|
|
|
|
static void k971_disconnect(struct pi_adapter *pi)
|
|
{
|
|
CCP(0x30);
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
/*
|
|
* count must be congruent to 0 MOD 4, but all known applications
|
|
*have this property.
|
|
*/
|
|
static void kbic_read_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
int k, a, b;
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
w0(0x98); w2(4); w2(6); w2(4);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w2(1); w0(8);
|
|
a = r1();
|
|
w0(0x28);
|
|
b = r1();
|
|
buf[2 * k] = j44(a, b);
|
|
w2(5);
|
|
b = r1();
|
|
w0(8);
|
|
a = r1();
|
|
buf[2 * k + 1] = j44(a, b);
|
|
w2(4);
|
|
}
|
|
break;
|
|
case 1:
|
|
w0(0xb8); w2(4); w2(6); w2(4);
|
|
for (k = 0; k < count / 4; k++) {
|
|
w0(0xb8);
|
|
w2(4); w2(5);
|
|
w0(8);
|
|
buf[4 * k] = j53(r12w());
|
|
w0(0xb8);
|
|
buf[4 * k + 1] = j53(r12w());
|
|
w2(4); w2(5);
|
|
buf[4 * k + 3] = j53(r12w());
|
|
w0(8);
|
|
buf[4 * k + 2] = j53(r12w());
|
|
}
|
|
w2(4);
|
|
break;
|
|
case 2:
|
|
w0(0x88); w2(4); w2(6); w2(4);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w2(0xa0); w2(0xa1);
|
|
buf[2 * k] = r0();
|
|
w2(0xa5);
|
|
buf[2 * k + 1] = r0();
|
|
}
|
|
w2(4);
|
|
break;
|
|
case 3:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count; k++)
|
|
buf[k] = r4();
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
case 4:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count / 2; k++)
|
|
((u16 *)buf)[k] = r4w();
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
case 5:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count / 4; k++)
|
|
((u32 *)buf)[k] = r4l();
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
int k;
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
w0(0x90); w2(4); w2(6); w2(4);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w0(buf[2 * k + 1]);
|
|
w2(0); w2(4);
|
|
w0(buf[2 * k]);
|
|
w2(5); w2(4);
|
|
}
|
|
break;
|
|
case 3:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w4(buf[2 * k + 1]);
|
|
w4(buf[2 * k]);
|
|
}
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
case 4:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count / 2; k++)
|
|
w4w(swab16(((u16 *)buf)[k]));
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
case 5:
|
|
w0(0xa0); w2(4); w2(6); w2(4); w3(0);
|
|
for (k = 0; k < count / 4; k++)
|
|
w4l(swab16(((u16 *)buf)[2 * k]) |
|
|
swab16(((u16 *)buf)[2 * k + 1]) << 16);
|
|
w2(4); w2(0); w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
|
|
{
|
|
char *mode[6] = { "4-bit", "5/3", "8-bit", "EPP-8", "EPP_16", "EPP-32"};
|
|
|
|
dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
|
|
chip, pi->port, pi->mode, mode[pi->mode], pi->delay);
|
|
}
|
|
|
|
static void k951_log_adapter(struct pi_adapter *pi)
|
|
{
|
|
kbic_log_adapter(pi, "KBIC-951A");
|
|
}
|
|
|
|
static void k971_log_adapter(struct pi_adapter *pi)
|
|
{
|
|
kbic_log_adapter(pi, "KBIC-971A");
|
|
}
|
|
|
|
static struct pi_protocol k951 = {
|
|
.owner = THIS_MODULE,
|
|
.name = "k951",
|
|
.max_mode = 6,
|
|
.epp_first = 3,
|
|
.default_delay = 1,
|
|
.max_units = 1,
|
|
.write_regr = kbic_write_regr,
|
|
.read_regr = kbic_read_regr,
|
|
.write_block = kbic_write_block,
|
|
.read_block = kbic_read_block,
|
|
.connect = k951_connect,
|
|
.disconnect = k951_disconnect,
|
|
.log_adapter = k951_log_adapter,
|
|
};
|
|
|
|
static struct pi_protocol k971 = {
|
|
.owner = THIS_MODULE,
|
|
.name = "k971",
|
|
.max_mode = 6,
|
|
.epp_first = 3,
|
|
.default_delay = 1,
|
|
.max_units = 1,
|
|
.write_regr = kbic_write_regr,
|
|
.read_regr = kbic_read_regr,
|
|
.write_block = kbic_write_block,
|
|
.read_block = kbic_read_block,
|
|
.connect = k971_connect,
|
|
.disconnect = k971_disconnect,
|
|
.log_adapter = k971_log_adapter,
|
|
};
|
|
|
|
static int __init kbic_init(void)
|
|
{
|
|
int rv;
|
|
|
|
rv = pata_parport_register_driver(&k951);
|
|
if (rv < 0)
|
|
return rv;
|
|
rv = pata_parport_register_driver(&k971);
|
|
if (rv < 0)
|
|
pata_parport_unregister_driver(&k951);
|
|
return rv;
|
|
}
|
|
|
|
static void __exit kbic_exit(void)
|
|
{
|
|
pata_parport_unregister_driver(&k951);
|
|
pata_parport_unregister_driver(&k971);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Grant R. Guenther <grant@torque.net>");
|
|
MODULE_DESCRIPTION("KingByte Information Systems KBIC-951A and KBIC-971A "
|
|
"parallel port IDE adapter protocol driver");
|
|
module_init(kbic_init)
|
|
module_exit(kbic_exit)
|