111b0cdb97
Many drivers bind the sequencer stuff in off-load by another driver module, so that it's loaded only on demand. In the current code, this mechanism doesn't work when the driver is built-in while the sequencer is module. We check with IS_REACHABLE() and enable only when the sequencer is in the same level of build. However, this is basically a overshoot. The binder code (snd-seq-device) is an individual module from the sequencer core (snd-seq), and we just have to make the former a built-in while keeping the latter a module for allowing the scenario like the above. This patch achieves that by rewriting Kconfig slightly. Now, a driver that provides the manual sequencer device binding should select CONFIG_SND_SEQ_DEVICE in a way as select SND_SEQ_DEVICE if SND_SEQUENCER != n Note that the "!=n" is needed here to avoid the influence of the sequencer core is module while the driver is built-in. Also, since rawmidi.o may be linked with snd_seq_device.o when built-in, we have to shuffle the code to make the linker happy. (the kernel linker isn't smart enough yet to handle such a case.) That is, snd_seq_device.c is moved to sound/core from sound/core/seq, as well as Makefile. Last but not least, the patch replaces the code using IS_REACHABLE() with IS_ENABLED(), since now the condition meets always when enabled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
236 lines
6.8 KiB
C
236 lines
6.8 KiB
C
/*
|
|
* Local definitions for the OPL4 driver
|
|
*
|
|
* Copyright (c) 2003 by Clemens Ladisch <clemens@ladisch.de>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed and/or modified under the
|
|
* terms of the GNU General Public License as published by the Free Software
|
|
* Foundation; either version 2 of the License, or (at your option) any later
|
|
* version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef __OPL4_LOCAL_H
|
|
#define __OPL4_LOCAL_H
|
|
|
|
#include <sound/opl4.h>
|
|
|
|
/*
|
|
* Register numbers
|
|
*/
|
|
|
|
#define OPL4_REG_TEST0 0x00
|
|
#define OPL4_REG_TEST1 0x01
|
|
|
|
#define OPL4_REG_MEMORY_CONFIGURATION 0x02
|
|
#define OPL4_MODE_BIT 0x01
|
|
#define OPL4_MTYPE_BIT 0x02
|
|
#define OPL4_TONE_HEADER_MASK 0x1c
|
|
#define OPL4_DEVICE_ID_MASK 0xe0
|
|
|
|
#define OPL4_REG_MEMORY_ADDRESS_HIGH 0x03
|
|
#define OPL4_REG_MEMORY_ADDRESS_MID 0x04
|
|
#define OPL4_REG_MEMORY_ADDRESS_LOW 0x05
|
|
#define OPL4_REG_MEMORY_DATA 0x06
|
|
|
|
/*
|
|
* Offsets to the register banks for voices. To get the
|
|
* register number just add the voice number to the bank offset.
|
|
*
|
|
* Wave Table Number low bits (0x08 to 0x1F)
|
|
*/
|
|
#define OPL4_REG_TONE_NUMBER 0x08
|
|
|
|
/* Wave Table Number high bit, F-Number low bits (0x20 to 0x37) */
|
|
#define OPL4_REG_F_NUMBER 0x20
|
|
#define OPL4_TONE_NUMBER_BIT8 0x01
|
|
#define OPL4_F_NUMBER_LOW_MASK 0xfe
|
|
|
|
/* F-Number high bits, Octave, Pseudo-Reverb (0x38 to 0x4F) */
|
|
#define OPL4_REG_OCTAVE 0x38
|
|
#define OPL4_F_NUMBER_HIGH_MASK 0x07
|
|
#define OPL4_BLOCK_MASK 0xf0
|
|
#define OPL4_PSEUDO_REVERB_BIT 0x08
|
|
|
|
/* Total Level, Level Direct (0x50 to 0x67) */
|
|
#define OPL4_REG_LEVEL 0x50
|
|
#define OPL4_TOTAL_LEVEL_MASK 0xfe
|
|
#define OPL4_LEVEL_DIRECT_BIT 0x01
|
|
|
|
/* Key On, Damp, LFO RST, CH, Panpot (0x68 to 0x7F) */
|
|
#define OPL4_REG_MISC 0x68
|
|
#define OPL4_KEY_ON_BIT 0x80
|
|
#define OPL4_DAMP_BIT 0x40
|
|
#define OPL4_LFO_RESET_BIT 0x20
|
|
#define OPL4_OUTPUT_CHANNEL_BIT 0x10
|
|
#define OPL4_PAN_POT_MASK 0x0f
|
|
|
|
/* LFO, VIB (0x80 to 0x97) */
|
|
#define OPL4_REG_LFO_VIBRATO 0x80
|
|
#define OPL4_LFO_FREQUENCY_MASK 0x38
|
|
#define OPL4_VIBRATO_DEPTH_MASK 0x07
|
|
#define OPL4_CHORUS_SEND_MASK 0xc0 /* ML only */
|
|
|
|
/* Attack / Decay 1 rate (0x98 to 0xAF) */
|
|
#define OPL4_REG_ATTACK_DECAY1 0x98
|
|
#define OPL4_ATTACK_RATE_MASK 0xf0
|
|
#define OPL4_DECAY1_RATE_MASK 0x0f
|
|
|
|
/* Decay level / 2 rate (0xB0 to 0xC7) */
|
|
#define OPL4_REG_LEVEL_DECAY2 0xb0
|
|
#define OPL4_DECAY_LEVEL_MASK 0xf0
|
|
#define OPL4_DECAY2_RATE_MASK 0x0f
|
|
|
|
/* Release rate / Rate correction (0xC8 to 0xDF) */
|
|
#define OPL4_REG_RELEASE_CORRECTION 0xc8
|
|
#define OPL4_RELEASE_RATE_MASK 0x0f
|
|
#define OPL4_RATE_INTERPOLATION_MASK 0xf0
|
|
|
|
/* AM (0xE0 to 0xF7) */
|
|
#define OPL4_REG_TREMOLO 0xe0
|
|
#define OPL4_TREMOLO_DEPTH_MASK 0x07
|
|
#define OPL4_REVERB_SEND_MASK 0xe0 /* ML only */
|
|
|
|
/* Mixer */
|
|
#define OPL4_REG_MIX_CONTROL_FM 0xf8
|
|
#define OPL4_REG_MIX_CONTROL_PCM 0xf9
|
|
#define OPL4_MIX_LEFT_MASK 0x07
|
|
#define OPL4_MIX_RIGHT_MASK 0x38
|
|
|
|
#define OPL4_REG_ATC 0xfa
|
|
#define OPL4_ATC_BIT 0x01 /* ???, ML only */
|
|
|
|
/* bits in the OPL3 Status register */
|
|
#define OPL4_STATUS_BUSY 0x01
|
|
#define OPL4_STATUS_LOAD 0x02
|
|
|
|
|
|
#define OPL4_MAX_VOICES 24
|
|
|
|
#define SNDRV_SEQ_DEV_ID_OPL4 "opl4-synth"
|
|
|
|
|
|
struct opl4_sound {
|
|
u16 tone;
|
|
s16 pitch_offset;
|
|
u8 key_scaling;
|
|
s8 panpot;
|
|
u8 vibrato;
|
|
u8 tone_attenuate;
|
|
u8 volume_factor;
|
|
u8 reg_lfo_vibrato;
|
|
u8 reg_attack_decay1;
|
|
u8 reg_level_decay2;
|
|
u8 reg_release_correction;
|
|
u8 reg_tremolo;
|
|
};
|
|
|
|
struct opl4_region {
|
|
u8 key_min, key_max;
|
|
struct opl4_sound sound;
|
|
};
|
|
|
|
struct opl4_region_ptr {
|
|
int count;
|
|
const struct opl4_region *regions;
|
|
};
|
|
|
|
struct opl4_voice {
|
|
struct list_head list;
|
|
int number;
|
|
struct snd_midi_channel *chan;
|
|
int note;
|
|
int velocity;
|
|
const struct opl4_sound *sound;
|
|
u8 level_direct;
|
|
u8 reg_f_number;
|
|
u8 reg_misc;
|
|
u8 reg_lfo_vibrato;
|
|
};
|
|
|
|
struct snd_opl4 {
|
|
unsigned long fm_port;
|
|
unsigned long pcm_port;
|
|
struct resource *res_fm_port;
|
|
struct resource *res_pcm_port;
|
|
unsigned short hardware;
|
|
spinlock_t reg_lock;
|
|
struct snd_card *card;
|
|
|
|
#ifdef CONFIG_SND_PROC_FS
|
|
struct snd_info_entry *proc_entry;
|
|
int memory_access;
|
|
#endif
|
|
struct mutex access_mutex;
|
|
|
|
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
|
|
int used;
|
|
|
|
int seq_dev_num;
|
|
int seq_client;
|
|
struct snd_seq_device *seq_dev;
|
|
|
|
struct snd_midi_channel_set *chset;
|
|
struct opl4_voice voices[OPL4_MAX_VOICES];
|
|
struct list_head off_voices;
|
|
struct list_head on_voices;
|
|
#endif
|
|
};
|
|
|
|
/* opl4_lib.c */
|
|
void snd_opl4_write(struct snd_opl4 *opl4, u8 reg, u8 value);
|
|
u8 snd_opl4_read(struct snd_opl4 *opl4, u8 reg);
|
|
void snd_opl4_read_memory(struct snd_opl4 *opl4, char *buf, int offset, int size);
|
|
void snd_opl4_write_memory(struct snd_opl4 *opl4, const char *buf, int offset, int size);
|
|
|
|
/* opl4_mixer.c */
|
|
int snd_opl4_create_mixer(struct snd_opl4 *opl4);
|
|
|
|
#ifdef CONFIG_SND_PROC_FS
|
|
/* opl4_proc.c */
|
|
int snd_opl4_create_proc(struct snd_opl4 *opl4);
|
|
void snd_opl4_free_proc(struct snd_opl4 *opl4);
|
|
#else
|
|
static inline int snd_opl4_create_proc(struct snd_opl4 *opl4) { return 0; }
|
|
static inline void snd_opl4_free_proc(struct snd_opl4 *opl4) {}
|
|
#endif
|
|
|
|
/* opl4_seq.c */
|
|
extern int volume_boost;
|
|
|
|
/* opl4_synth.c */
|
|
void snd_opl4_synth_reset(struct snd_opl4 *opl4);
|
|
void snd_opl4_synth_shutdown(struct snd_opl4 *opl4);
|
|
void snd_opl4_note_on(void *p, int note, int vel, struct snd_midi_channel *chan);
|
|
void snd_opl4_note_off(void *p, int note, int vel, struct snd_midi_channel *chan);
|
|
void snd_opl4_terminate_note(void *p, int note, struct snd_midi_channel *chan);
|
|
void snd_opl4_control(void *p, int type, struct snd_midi_channel *chan);
|
|
void snd_opl4_sysex(void *p, unsigned char *buf, int len, int parsed, struct snd_midi_channel_set *chset);
|
|
|
|
/* yrw801.c */
|
|
int snd_yrw801_detect(struct snd_opl4 *opl4);
|
|
extern const struct opl4_region_ptr snd_yrw801_regions[];
|
|
|
|
#endif /* __OPL4_LOCAL_H */
|