iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
982,116 Commits 104 Branches 1,843 Tags 5.7 GiB
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%
95652f98b1
Go to file
akshatzen 95652f98b1 scsi: pm80xx: Check main config table address 
The driver initializes main configuration, general status, inbound queue
and outbound queue table addresses based on a value read from
MSGU_SCRATCH_PAD_0 register.

We should validate these addresses before dereferencing them.

Adds two validations:

 1. Check if main configuration table offset lies within the pcibar
    mapped

 2. Check if first dword of main configuration table reads "PMCS"

There are two calls to init_pci_device_addresses() done during
pm8001_pci_probe() in this sequence:

 1. First inside chip_soft_rst, where if init_pci_device_addresses fails we
    will go ahead assuming MPI state is not ready and reset the device as
    long as bootloader is okay.  This gives chance to second call of
    init_pci_device_addresses to set up the addresses after reset.

 2. The second call is via pm80xx_chip_init, after soft reset is done and
    firmware is checked to be ready. Once that is done we are safe to go
    ahead and initialize default table values and use them.

Tests:

 1. Enabled debugging logs and observed no issues during initialization,
    with a controller with no issues:

    pm80xx0:: pm8001_setup_msix 1034: pci_alloc_irq_vectors request ret:64 no of intr 64
    pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000
    pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0
    pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50
    pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4
    pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128
    pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928
    pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408
    pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608
    pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval)
    pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval)
    pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval)
    pm80xx0:: pm80xx_chip_soft_rst 1446: reset register before write : 0x0
    pm80xx0:: pm80xx_chip_soft_rst 1478: reset register after write 0x40
    pm80xx0:: pm80xx_chip_soft_rst 1544: SPCv soft reset Complete
    pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000
    pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0
    pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50
    pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4
    pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128
    pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928
    pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408
    pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608
    pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval)
    pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval)
    pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval)
    pm80xx0:: pm80xx_chip_init 1329: MPI initialize successful!

 2. Tested controller with firmware known to have initialization issue and
    observed no crashes with this fix:

    pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38
    pm80xx 0000:01:00.0: Removing from 1:1 domain
    pm80xx 0000:01:00.0: Requesting non-1:1 mappings
    pm80xx0:: init_pci_device_addresses 948: BAD main config signature 0x0
    pm80xx0:: mpi_uninit_check 1365: Failed to init pci addresses
    pm80xx0:: pm80xx_chip_soft_rst 1435: MPI state is not ready scratch:0:8:62a01000:0
    pm80xx0:: pm80xx_chip_soft_rst 1518: Firmware is not ready!
    pm80xx0:: pm80xx_chip_soft_rst 1532: iButton Feature is not Available!!!
    pm80xx0:: pm80xx_chip_init 1301: Firmware is not ready!
    pm80xx0:: pm8001_pci_probe 1215: chip_init failed [ret: -16]
    pm80xx: probe of 0000:01:00.0 failed with error -16
    pm80xx 0000:07:00.0: pm80xx: driver version 0.1.38
    pm80xx 0000:07:00.0: Removing from 1:1 domain
    pm80xx 0000:07:00.0: Requesting non-1:1 mappings
    scsi host6: pm80xx
    pm80xx1:: pm8001_setup_sgpio 5568: failed sgpio_req timeout
    pm80xx1:: mpi_phy_start_resp 3447: phy start resp status:0x0, phyid:0x0
    pm80xx 0000:08:00.0: pm80xx: driver version 0.1.38
    pm80xx 0000:08:00.0: Removing from 1:1 domain
    pm80xx 0000:08:00.0: Requesting non-1:1 mappings

 3. Without this fix we observe crash on the same controller:

    pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38
    pm80xx 0000:01:00.0: Removing from 1:1 domain
    pm80xx 0000:01:00.0: Requesting non-1:1 mappings
    [<ffffffffc0451b3b>] pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx]
    [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx]
    RIP: 0010:pm80xx_chip_soft_rst+0x71/0x4c0 [pm80xx]
    [<ffffffffc0451b3b>] ? pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx]
    [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx]
    pm80xx0:: mpi_uninit_check 1339: TIMEOUT:IBDB value/=2
    pm80xx0:: pm80xx_chip_soft_rst 1387: MPI state is not ready scratch:0:8:62a01000:0
    pm80xx0:: pm80xx_chip_soft_rst 1470: Firmware is not ready!
    pm80xx0:: pm80xx_chip_soft_rst 1484: iButton Feature is not Available!!!
    pm80xx0:: pm80xx_chip_init 1266: Firmware is not ready!
    pm80xx0:: pm8001_pci_probe 1207: chip_init failed [ret: -16]
    pm80xx: probe of 0000:01:00.0 failed with error -16

Link: https://lore.kernel.org/r/20210109123849.17098-4-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: akshatzen <akshatzen@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13 00:02:01 -05:00
arch - Update defconfigs and sort config select list. 2021-01-02 12:22:46 -08:00
block SCSI fixes on 20210101 2021-01-01 12:58:07 -08:00
certs .gitignore: add SPDX License Identifier 2020-03-25 11:50:48 +01:00
crypto crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd 2020-12-04 18:16:53 +11:00
Documentation A small set of late-arriving, small documentation fixes. 2020-12-24 14:20:33 -08:00
drivers scsi: pm80xx: Check main config table address 2021-01-13 00:02:01 -05:00
fs block-5.11-2021-01-01 2021-01-01 12:49:09 -08:00
include scsi: ufs: Make UPIU trace easier differentiate among CDB, OSF, and TM 2021-01-07 22:29:10 -05:00
init kasan, arm64: only use kasan_depth for software modes 2020-12-22 12:55:07 -08:00
ipc Merge branch 'akpm' (patches from Andrew) 2020-12-15 12:53:37 -08:00
kernel io_uring-5.11-2021-01-01 2021-01-01 12:29:49 -08:00
lib zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c 2020-12-29 15:36:49 -08:00
LICENSES LICENSES: Add the CC-BY-4.0 license 2020-12-08 10:33:27 -07:00
mm mm: slub: call account_slab_page() after slab page initialization 2020-12-29 15:36:49 -08:00
net libceph: align session_key and con_secret to 16 bytes 2020-12-28 20:34:33 +01:00
samples ARM: SoC drivers for v5.11 2020-12-16 16:38:41 -08:00
scripts depmod: handle the case of /sbin/depmod without /sbin in PATH 2021-01-01 12:26:39 -08:00
security Provide a fix for the incorrect handling of privilege 2020-12-24 14:08:43 -08:00
sound sound fixes for 5.11-rc1 2020-12-23 15:11:08 -08:00
tools selftests/vm: fix building protection keys test 2020-12-29 15:36:49 -08:00
usr Merge branch 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2020-08-07 13:29:39 -07:00
virt ARM: 2020-12-20 10:44:05 -08:00
.clang-format RDMA 5.10 pull request 2020-10-17 11:18:18 -07:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: docs: ignore sphinx_*/ directories 2020-09-10 10:44:31 -06:00
.mailmap RDMA 5.11 pull request 2020-12-16 13:42:26 -08:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-12-11 22:29:38 -08:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS Merge branches 'pm-cpufreq' and 'pm-cpuidle' 2021-01-02 10:16:32 +01:00
Makefile Linux 5.11-rc2 2021-01-03 15:55:30 -08:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

README 

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.