95f510d0b7
Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1831 lines
41 KiB
C
1831 lines
41 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* net/dsa/dsa2.c - Hardware switch handling, binding version 2
|
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
|
* Copyright (c) 2013 Florian Fainelli <florian@openwrt.org>
|
|
* Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch>
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/list.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
#include <net/devlink.h>
|
|
#include <net/sch_generic.h>
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
static DEFINE_MUTEX(dsa2_mutex);
|
|
LIST_HEAD(dsa_tree_list);
|
|
|
|
/* Track the bridges with forwarding offload enabled */
|
|
static unsigned long dsa_fwd_offloading_bridges;
|
|
|
|
/**
|
|
* dsa_tree_notify - Execute code for all switches in a DSA switch tree.
|
|
* @dst: collection of struct dsa_switch devices to notify.
|
|
* @e: event, must be of type DSA_NOTIFIER_*
|
|
* @v: event-specific value.
|
|
*
|
|
* Given a struct dsa_switch_tree, this can be used to run a function once for
|
|
* each member DSA switch. The other alternative of traversing the tree is only
|
|
* through its ports list, which does not uniquely list the switches.
|
|
*/
|
|
int dsa_tree_notify(struct dsa_switch_tree *dst, unsigned long e, void *v)
|
|
{
|
|
struct raw_notifier_head *nh = &dst->nh;
|
|
int err;
|
|
|
|
err = raw_notifier_call_chain(nh, e, v);
|
|
|
|
return notifier_to_errno(err);
|
|
}
|
|
|
|
/**
|
|
* dsa_broadcast - Notify all DSA trees in the system.
|
|
* @e: event, must be of type DSA_NOTIFIER_*
|
|
* @v: event-specific value.
|
|
*
|
|
* Can be used to notify the switching fabric of events such as cross-chip
|
|
* bridging between disjoint trees (such as islands of tagger-compatible
|
|
* switches bridged by an incompatible middle switch).
|
|
*
|
|
* WARNING: this function is not reliable during probe time, because probing
|
|
* between trees is asynchronous and not all DSA trees might have probed.
|
|
*/
|
|
int dsa_broadcast(unsigned long e, void *v)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
int err = 0;
|
|
|
|
list_for_each_entry(dst, &dsa_tree_list, list) {
|
|
err = dsa_tree_notify(dst, e, v);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* dsa_lag_map() - Map LAG structure to a linear LAG array
|
|
* @dst: Tree in which to record the mapping.
|
|
* @lag: LAG structure that is to be mapped to the tree's array.
|
|
*
|
|
* dsa_lag_id/dsa_lag_by_id can then be used to translate between the
|
|
* two spaces. The size of the mapping space is determined by the
|
|
* driver by setting ds->num_lag_ids. It is perfectly legal to leave
|
|
* it unset if it is not needed, in which case these functions become
|
|
* no-ops.
|
|
*/
|
|
void dsa_lag_map(struct dsa_switch_tree *dst, struct dsa_lag *lag)
|
|
{
|
|
unsigned int id;
|
|
|
|
for (id = 1; id <= dst->lags_len; id++) {
|
|
if (!dsa_lag_by_id(dst, id)) {
|
|
dst->lags[id - 1] = lag;
|
|
lag->id = id;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* No IDs left, which is OK. Some drivers do not need it. The
|
|
* ones that do, e.g. mv88e6xxx, will discover that dsa_lag_id
|
|
* returns an error for this device when joining the LAG. The
|
|
* driver can then return -EOPNOTSUPP back to DSA, which will
|
|
* fall back to a software LAG.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* dsa_lag_unmap() - Remove a LAG ID mapping
|
|
* @dst: Tree in which the mapping is recorded.
|
|
* @lag: LAG structure that was mapped.
|
|
*
|
|
* As there may be multiple users of the mapping, it is only removed
|
|
* if there are no other references to it.
|
|
*/
|
|
void dsa_lag_unmap(struct dsa_switch_tree *dst, struct dsa_lag *lag)
|
|
{
|
|
unsigned int id;
|
|
|
|
dsa_lags_foreach_id(id, dst) {
|
|
if (dsa_lag_by_id(dst, id) == lag) {
|
|
dst->lags[id - 1] = NULL;
|
|
lag->id = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
struct dsa_lag *dsa_tree_lag_find(struct dsa_switch_tree *dst,
|
|
const struct net_device *lag_dev)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_lag_dev_get(dp) == lag_dev)
|
|
return dp->lag;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
struct dsa_bridge *dsa_tree_bridge_find(struct dsa_switch_tree *dst,
|
|
const struct net_device *br)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_bridge_dev_get(dp) == br)
|
|
return dp->bridge;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int dsa_bridge_num_find(const struct net_device *bridge_dev)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
|
|
list_for_each_entry(dst, &dsa_tree_list, list) {
|
|
struct dsa_bridge *bridge;
|
|
|
|
bridge = dsa_tree_bridge_find(dst, bridge_dev);
|
|
if (bridge)
|
|
return bridge->num;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned int dsa_bridge_num_get(const struct net_device *bridge_dev, int max)
|
|
{
|
|
unsigned int bridge_num = dsa_bridge_num_find(bridge_dev);
|
|
|
|
/* Switches without FDB isolation support don't get unique
|
|
* bridge numbering
|
|
*/
|
|
if (!max)
|
|
return 0;
|
|
|
|
if (!bridge_num) {
|
|
/* First port that requests FDB isolation or TX forwarding
|
|
* offload for this bridge
|
|
*/
|
|
bridge_num = find_next_zero_bit(&dsa_fwd_offloading_bridges,
|
|
DSA_MAX_NUM_OFFLOADING_BRIDGES,
|
|
1);
|
|
if (bridge_num >= max)
|
|
return 0;
|
|
|
|
set_bit(bridge_num, &dsa_fwd_offloading_bridges);
|
|
}
|
|
|
|
return bridge_num;
|
|
}
|
|
|
|
void dsa_bridge_num_put(const struct net_device *bridge_dev,
|
|
unsigned int bridge_num)
|
|
{
|
|
/* Since we refcount bridges, we know that when we call this function
|
|
* it is no longer in use, so we can just go ahead and remove it from
|
|
* the bit mask.
|
|
*/
|
|
clear_bit(bridge_num, &dsa_fwd_offloading_bridges);
|
|
}
|
|
|
|
struct dsa_switch *dsa_switch_find(int tree_index, int sw_index)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dst, &dsa_tree_list, list) {
|
|
if (dst->index != tree_index)
|
|
continue;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dp->ds->index != sw_index)
|
|
continue;
|
|
|
|
return dp->ds;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_switch_find);
|
|
|
|
static struct dsa_switch_tree *dsa_tree_find(int index)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
|
|
list_for_each_entry(dst, &dsa_tree_list, list)
|
|
if (dst->index == index)
|
|
return dst;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct dsa_switch_tree *dsa_tree_alloc(int index)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
|
|
dst = kzalloc(sizeof(*dst), GFP_KERNEL);
|
|
if (!dst)
|
|
return NULL;
|
|
|
|
dst->index = index;
|
|
|
|
INIT_LIST_HEAD(&dst->rtable);
|
|
|
|
INIT_LIST_HEAD(&dst->ports);
|
|
|
|
INIT_LIST_HEAD(&dst->list);
|
|
list_add_tail(&dst->list, &dsa_tree_list);
|
|
|
|
kref_init(&dst->refcount);
|
|
|
|
return dst;
|
|
}
|
|
|
|
static void dsa_tree_free(struct dsa_switch_tree *dst)
|
|
{
|
|
if (dst->tag_ops)
|
|
dsa_tag_driver_put(dst->tag_ops);
|
|
list_del(&dst->list);
|
|
kfree(dst);
|
|
}
|
|
|
|
static struct dsa_switch_tree *dsa_tree_get(struct dsa_switch_tree *dst)
|
|
{
|
|
if (dst)
|
|
kref_get(&dst->refcount);
|
|
|
|
return dst;
|
|
}
|
|
|
|
static struct dsa_switch_tree *dsa_tree_touch(int index)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
|
|
dst = dsa_tree_find(index);
|
|
if (dst)
|
|
return dsa_tree_get(dst);
|
|
else
|
|
return dsa_tree_alloc(index);
|
|
}
|
|
|
|
static void dsa_tree_release(struct kref *ref)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
|
|
dst = container_of(ref, struct dsa_switch_tree, refcount);
|
|
|
|
dsa_tree_free(dst);
|
|
}
|
|
|
|
static void dsa_tree_put(struct dsa_switch_tree *dst)
|
|
{
|
|
if (dst)
|
|
kref_put(&dst->refcount, dsa_tree_release);
|
|
}
|
|
|
|
static struct dsa_port *dsa_tree_find_port_by_node(struct dsa_switch_tree *dst,
|
|
struct device_node *dn)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dp->dn == dn)
|
|
return dp;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct dsa_link *dsa_link_touch(struct dsa_port *dp,
|
|
struct dsa_port *link_dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct dsa_switch_tree *dst;
|
|
struct dsa_link *dl;
|
|
|
|
dst = ds->dst;
|
|
|
|
list_for_each_entry(dl, &dst->rtable, list)
|
|
if (dl->dp == dp && dl->link_dp == link_dp)
|
|
return dl;
|
|
|
|
dl = kzalloc(sizeof(*dl), GFP_KERNEL);
|
|
if (!dl)
|
|
return NULL;
|
|
|
|
dl->dp = dp;
|
|
dl->link_dp = link_dp;
|
|
|
|
INIT_LIST_HEAD(&dl->list);
|
|
list_add_tail(&dl->list, &dst->rtable);
|
|
|
|
return dl;
|
|
}
|
|
|
|
static bool dsa_port_setup_routing_table(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
struct device_node *dn = dp->dn;
|
|
struct of_phandle_iterator it;
|
|
struct dsa_port *link_dp;
|
|
struct dsa_link *dl;
|
|
int err;
|
|
|
|
of_for_each_phandle(&it, err, dn, "link", NULL, 0) {
|
|
link_dp = dsa_tree_find_port_by_node(dst, it.node);
|
|
if (!link_dp) {
|
|
of_node_put(it.node);
|
|
return false;
|
|
}
|
|
|
|
dl = dsa_link_touch(dp, link_dp);
|
|
if (!dl) {
|
|
of_node_put(it.node);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool dsa_tree_setup_routing_table(struct dsa_switch_tree *dst)
|
|
{
|
|
bool complete = true;
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dsa_port_is_dsa(dp)) {
|
|
complete = dsa_port_setup_routing_table(dp);
|
|
if (!complete)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return complete;
|
|
}
|
|
|
|
static struct dsa_port *dsa_tree_find_first_cpu(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_is_cpu(dp))
|
|
return dp;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
struct net_device *dsa_tree_find_first_master(struct dsa_switch_tree *dst)
|
|
{
|
|
struct device_node *ethernet;
|
|
struct net_device *master;
|
|
struct dsa_port *cpu_dp;
|
|
|
|
cpu_dp = dsa_tree_find_first_cpu(dst);
|
|
ethernet = of_parse_phandle(cpu_dp->dn, "ethernet", 0);
|
|
master = of_find_net_device_by_node(ethernet);
|
|
of_node_put(ethernet);
|
|
|
|
return master;
|
|
}
|
|
|
|
/* Assign the default CPU port (the first one in the tree) to all ports of the
|
|
* fabric which don't already have one as part of their own switch.
|
|
*/
|
|
static int dsa_tree_setup_default_cpu(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *cpu_dp, *dp;
|
|
|
|
cpu_dp = dsa_tree_find_first_cpu(dst);
|
|
if (!cpu_dp) {
|
|
pr_err("DSA: tree %d has no CPU port\n", dst->index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dp->cpu_dp)
|
|
continue;
|
|
|
|
if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp))
|
|
dp->cpu_dp = cpu_dp;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Perform initial assignment of CPU ports to user ports and DSA links in the
|
|
* fabric, giving preference to CPU ports local to each switch. Default to
|
|
* using the first CPU port in the switch tree if the port does not have a CPU
|
|
* port local to this switch.
|
|
*/
|
|
static int dsa_tree_setup_cpu_ports(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *cpu_dp, *dp;
|
|
|
|
list_for_each_entry(cpu_dp, &dst->ports, list) {
|
|
if (!dsa_port_is_cpu(cpu_dp))
|
|
continue;
|
|
|
|
/* Prefer a local CPU port */
|
|
dsa_switch_for_each_port(dp, cpu_dp->ds) {
|
|
/* Prefer the first local CPU port found */
|
|
if (dp->cpu_dp)
|
|
continue;
|
|
|
|
if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp))
|
|
dp->cpu_dp = cpu_dp;
|
|
}
|
|
}
|
|
|
|
return dsa_tree_setup_default_cpu(dst);
|
|
}
|
|
|
|
static void dsa_tree_teardown_cpu_ports(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp))
|
|
dp->cpu_dp = NULL;
|
|
}
|
|
|
|
static int dsa_port_setup(struct dsa_port *dp)
|
|
{
|
|
struct devlink_port *dlp = &dp->devlink_port;
|
|
bool dsa_port_link_registered = false;
|
|
struct dsa_switch *ds = dp->ds;
|
|
bool dsa_port_enabled = false;
|
|
int err = 0;
|
|
|
|
if (dp->setup)
|
|
return 0;
|
|
|
|
if (ds->ops->port_setup) {
|
|
err = ds->ops->port_setup(ds, dp->index);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
switch (dp->type) {
|
|
case DSA_PORT_TYPE_UNUSED:
|
|
dsa_port_disable(dp);
|
|
break;
|
|
case DSA_PORT_TYPE_CPU:
|
|
if (dp->dn) {
|
|
err = dsa_shared_port_link_register_of(dp);
|
|
if (err)
|
|
break;
|
|
dsa_port_link_registered = true;
|
|
} else {
|
|
dev_warn(ds->dev,
|
|
"skipping link registration for CPU port %d\n",
|
|
dp->index);
|
|
}
|
|
|
|
err = dsa_port_enable(dp, NULL);
|
|
if (err)
|
|
break;
|
|
dsa_port_enabled = true;
|
|
|
|
break;
|
|
case DSA_PORT_TYPE_DSA:
|
|
if (dp->dn) {
|
|
err = dsa_shared_port_link_register_of(dp);
|
|
if (err)
|
|
break;
|
|
dsa_port_link_registered = true;
|
|
} else {
|
|
dev_warn(ds->dev,
|
|
"skipping link registration for DSA port %d\n",
|
|
dp->index);
|
|
}
|
|
|
|
err = dsa_port_enable(dp, NULL);
|
|
if (err)
|
|
break;
|
|
dsa_port_enabled = true;
|
|
|
|
break;
|
|
case DSA_PORT_TYPE_USER:
|
|
of_get_mac_address(dp->dn, dp->mac);
|
|
err = dsa_slave_create(dp);
|
|
if (err)
|
|
break;
|
|
|
|
devlink_port_type_eth_set(dlp, dp->slave);
|
|
break;
|
|
}
|
|
|
|
if (err && dsa_port_enabled)
|
|
dsa_port_disable(dp);
|
|
if (err && dsa_port_link_registered)
|
|
dsa_shared_port_link_unregister_of(dp);
|
|
if (err) {
|
|
if (ds->ops->port_teardown)
|
|
ds->ops->port_teardown(ds, dp->index);
|
|
return err;
|
|
}
|
|
|
|
dp->setup = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_port_devlink_setup(struct dsa_port *dp)
|
|
{
|
|
struct devlink_port *dlp = &dp->devlink_port;
|
|
struct dsa_switch_tree *dst = dp->ds->dst;
|
|
struct devlink_port_attrs attrs = {};
|
|
struct devlink *dl = dp->ds->devlink;
|
|
const unsigned char *id;
|
|
unsigned char len;
|
|
int err;
|
|
|
|
id = (const unsigned char *)&dst->index;
|
|
len = sizeof(dst->index);
|
|
|
|
attrs.phys.port_number = dp->index;
|
|
memcpy(attrs.switch_id.id, id, len);
|
|
attrs.switch_id.id_len = len;
|
|
memset(dlp, 0, sizeof(*dlp));
|
|
|
|
switch (dp->type) {
|
|
case DSA_PORT_TYPE_UNUSED:
|
|
attrs.flavour = DEVLINK_PORT_FLAVOUR_UNUSED;
|
|
break;
|
|
case DSA_PORT_TYPE_CPU:
|
|
attrs.flavour = DEVLINK_PORT_FLAVOUR_CPU;
|
|
break;
|
|
case DSA_PORT_TYPE_DSA:
|
|
attrs.flavour = DEVLINK_PORT_FLAVOUR_DSA;
|
|
break;
|
|
case DSA_PORT_TYPE_USER:
|
|
attrs.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL;
|
|
break;
|
|
}
|
|
|
|
devlink_port_attrs_set(dlp, &attrs);
|
|
err = devlink_port_register(dl, dlp, dp->index);
|
|
|
|
if (!err)
|
|
dp->devlink_port_setup = true;
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_port_teardown(struct dsa_port *dp)
|
|
{
|
|
struct devlink_port *dlp = &dp->devlink_port;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!dp->setup)
|
|
return;
|
|
|
|
if (ds->ops->port_teardown)
|
|
ds->ops->port_teardown(ds, dp->index);
|
|
|
|
devlink_port_type_clear(dlp);
|
|
|
|
switch (dp->type) {
|
|
case DSA_PORT_TYPE_UNUSED:
|
|
break;
|
|
case DSA_PORT_TYPE_CPU:
|
|
dsa_port_disable(dp);
|
|
if (dp->dn)
|
|
dsa_shared_port_link_unregister_of(dp);
|
|
break;
|
|
case DSA_PORT_TYPE_DSA:
|
|
dsa_port_disable(dp);
|
|
if (dp->dn)
|
|
dsa_shared_port_link_unregister_of(dp);
|
|
break;
|
|
case DSA_PORT_TYPE_USER:
|
|
if (dp->slave) {
|
|
dsa_slave_destroy(dp->slave);
|
|
dp->slave = NULL;
|
|
}
|
|
break;
|
|
}
|
|
|
|
dp->setup = false;
|
|
}
|
|
|
|
static void dsa_port_devlink_teardown(struct dsa_port *dp)
|
|
{
|
|
struct devlink_port *dlp = &dp->devlink_port;
|
|
|
|
if (dp->devlink_port_setup)
|
|
devlink_port_unregister(dlp);
|
|
dp->devlink_port_setup = false;
|
|
}
|
|
|
|
/* Destroy the current devlink port, and create a new one which has the UNUSED
|
|
* flavour. At this point, any call to ds->ops->port_setup has been already
|
|
* balanced out by a call to ds->ops->port_teardown, so we know that any
|
|
* devlink port regions the driver had are now unregistered. We then call its
|
|
* ds->ops->port_setup again, in order for the driver to re-create them on the
|
|
* new devlink port.
|
|
*/
|
|
static int dsa_port_reinit_as_unused(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
dsa_port_devlink_teardown(dp);
|
|
dp->type = DSA_PORT_TYPE_UNUSED;
|
|
err = dsa_port_devlink_setup(dp);
|
|
if (err)
|
|
return err;
|
|
|
|
if (ds->ops->port_setup) {
|
|
/* On error, leave the devlink port registered,
|
|
* dsa_switch_teardown will clean it up later.
|
|
*/
|
|
err = ds->ops->port_setup(ds, dp->index);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_devlink_info_get(struct devlink *dl,
|
|
struct devlink_info_req *req,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_to_ds(dl);
|
|
|
|
if (ds->ops->devlink_info_get)
|
|
return ds->ops->devlink_info_get(ds, req, extack);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int dsa_devlink_sb_pool_get(struct devlink *dl,
|
|
unsigned int sb_index, u16 pool_index,
|
|
struct devlink_sb_pool_info *pool_info)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_to_ds(dl);
|
|
|
|
if (!ds->ops->devlink_sb_pool_get)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_pool_get(ds, sb_index, pool_index,
|
|
pool_info);
|
|
}
|
|
|
|
static int dsa_devlink_sb_pool_set(struct devlink *dl, unsigned int sb_index,
|
|
u16 pool_index, u32 size,
|
|
enum devlink_sb_threshold_type threshold_type,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_to_ds(dl);
|
|
|
|
if (!ds->ops->devlink_sb_pool_set)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_pool_set(ds, sb_index, pool_index, size,
|
|
threshold_type, extack);
|
|
}
|
|
|
|
static int dsa_devlink_sb_port_pool_get(struct devlink_port *dlp,
|
|
unsigned int sb_index, u16 pool_index,
|
|
u32 *p_threshold)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_port_pool_get)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_port_pool_get(ds, port, sb_index,
|
|
pool_index, p_threshold);
|
|
}
|
|
|
|
static int dsa_devlink_sb_port_pool_set(struct devlink_port *dlp,
|
|
unsigned int sb_index, u16 pool_index,
|
|
u32 threshold,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_port_pool_set)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_port_pool_set(ds, port, sb_index,
|
|
pool_index, threshold, extack);
|
|
}
|
|
|
|
static int
|
|
dsa_devlink_sb_tc_pool_bind_get(struct devlink_port *dlp,
|
|
unsigned int sb_index, u16 tc_index,
|
|
enum devlink_sb_pool_type pool_type,
|
|
u16 *p_pool_index, u32 *p_threshold)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_tc_pool_bind_get)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_tc_pool_bind_get(ds, port, sb_index,
|
|
tc_index, pool_type,
|
|
p_pool_index, p_threshold);
|
|
}
|
|
|
|
static int
|
|
dsa_devlink_sb_tc_pool_bind_set(struct devlink_port *dlp,
|
|
unsigned int sb_index, u16 tc_index,
|
|
enum devlink_sb_pool_type pool_type,
|
|
u16 pool_index, u32 threshold,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_tc_pool_bind_set)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_tc_pool_bind_set(ds, port, sb_index,
|
|
tc_index, pool_type,
|
|
pool_index, threshold,
|
|
extack);
|
|
}
|
|
|
|
static int dsa_devlink_sb_occ_snapshot(struct devlink *dl,
|
|
unsigned int sb_index)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_to_ds(dl);
|
|
|
|
if (!ds->ops->devlink_sb_occ_snapshot)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_occ_snapshot(ds, sb_index);
|
|
}
|
|
|
|
static int dsa_devlink_sb_occ_max_clear(struct devlink *dl,
|
|
unsigned int sb_index)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_to_ds(dl);
|
|
|
|
if (!ds->ops->devlink_sb_occ_max_clear)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_occ_max_clear(ds, sb_index);
|
|
}
|
|
|
|
static int dsa_devlink_sb_occ_port_pool_get(struct devlink_port *dlp,
|
|
unsigned int sb_index,
|
|
u16 pool_index, u32 *p_cur,
|
|
u32 *p_max)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_occ_port_pool_get)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_occ_port_pool_get(ds, port, sb_index,
|
|
pool_index, p_cur, p_max);
|
|
}
|
|
|
|
static int
|
|
dsa_devlink_sb_occ_tc_port_bind_get(struct devlink_port *dlp,
|
|
unsigned int sb_index, u16 tc_index,
|
|
enum devlink_sb_pool_type pool_type,
|
|
u32 *p_cur, u32 *p_max)
|
|
{
|
|
struct dsa_switch *ds = dsa_devlink_port_to_ds(dlp);
|
|
int port = dsa_devlink_port_to_port(dlp);
|
|
|
|
if (!ds->ops->devlink_sb_occ_tc_port_bind_get)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->devlink_sb_occ_tc_port_bind_get(ds, port,
|
|
sb_index, tc_index,
|
|
pool_type, p_cur,
|
|
p_max);
|
|
}
|
|
|
|
static const struct devlink_ops dsa_devlink_ops = {
|
|
.info_get = dsa_devlink_info_get,
|
|
.sb_pool_get = dsa_devlink_sb_pool_get,
|
|
.sb_pool_set = dsa_devlink_sb_pool_set,
|
|
.sb_port_pool_get = dsa_devlink_sb_port_pool_get,
|
|
.sb_port_pool_set = dsa_devlink_sb_port_pool_set,
|
|
.sb_tc_pool_bind_get = dsa_devlink_sb_tc_pool_bind_get,
|
|
.sb_tc_pool_bind_set = dsa_devlink_sb_tc_pool_bind_set,
|
|
.sb_occ_snapshot = dsa_devlink_sb_occ_snapshot,
|
|
.sb_occ_max_clear = dsa_devlink_sb_occ_max_clear,
|
|
.sb_occ_port_pool_get = dsa_devlink_sb_occ_port_pool_get,
|
|
.sb_occ_tc_port_bind_get = dsa_devlink_sb_occ_tc_port_bind_get,
|
|
};
|
|
|
|
static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds)
|
|
{
|
|
const struct dsa_device_ops *tag_ops = ds->dst->tag_ops;
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
int err;
|
|
|
|
if (tag_ops->proto == dst->default_proto)
|
|
goto connect;
|
|
|
|
rtnl_lock();
|
|
err = ds->ops->change_tag_protocol(ds, tag_ops->proto);
|
|
rtnl_unlock();
|
|
if (err) {
|
|
dev_err(ds->dev, "Unable to use tag protocol \"%s\": %pe\n",
|
|
tag_ops->name, ERR_PTR(err));
|
|
return err;
|
|
}
|
|
|
|
connect:
|
|
if (tag_ops->connect) {
|
|
err = tag_ops->connect(ds);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (ds->ops->connect_tag_protocol) {
|
|
err = ds->ops->connect_tag_protocol(ds, tag_ops->proto);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"Unable to connect to tag protocol \"%s\": %pe\n",
|
|
tag_ops->name, ERR_PTR(err));
|
|
goto disconnect;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
disconnect:
|
|
if (tag_ops->disconnect)
|
|
tag_ops->disconnect(ds);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_switch_setup(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_devlink_priv *dl_priv;
|
|
struct device_node *dn;
|
|
struct dsa_port *dp;
|
|
int err;
|
|
|
|
if (ds->setup)
|
|
return 0;
|
|
|
|
/* Initialize ds->phys_mii_mask before registering the slave MDIO bus
|
|
* driver and before ops->setup() has run, since the switch drivers and
|
|
* the slave MDIO bus driver rely on these values for probing PHY
|
|
* devices or not
|
|
*/
|
|
ds->phys_mii_mask |= dsa_user_ports(ds);
|
|
|
|
/* Add the switch to devlink before calling setup, so that setup can
|
|
* add dpipe tables
|
|
*/
|
|
ds->devlink =
|
|
devlink_alloc(&dsa_devlink_ops, sizeof(*dl_priv), ds->dev);
|
|
if (!ds->devlink)
|
|
return -ENOMEM;
|
|
dl_priv = devlink_priv(ds->devlink);
|
|
dl_priv->ds = ds;
|
|
|
|
/* Setup devlink port instances now, so that the switch
|
|
* setup() can register regions etc, against the ports
|
|
*/
|
|
dsa_switch_for_each_port(dp, ds) {
|
|
err = dsa_port_devlink_setup(dp);
|
|
if (err)
|
|
goto unregister_devlink_ports;
|
|
}
|
|
|
|
err = dsa_switch_register_notifier(ds);
|
|
if (err)
|
|
goto unregister_devlink_ports;
|
|
|
|
ds->configure_vlan_while_not_filtering = true;
|
|
|
|
err = ds->ops->setup(ds);
|
|
if (err < 0)
|
|
goto unregister_notifier;
|
|
|
|
err = dsa_switch_setup_tag_protocol(ds);
|
|
if (err)
|
|
goto teardown;
|
|
|
|
if (!ds->slave_mii_bus && ds->ops->phy_read) {
|
|
ds->slave_mii_bus = mdiobus_alloc();
|
|
if (!ds->slave_mii_bus) {
|
|
err = -ENOMEM;
|
|
goto teardown;
|
|
}
|
|
|
|
dsa_slave_mii_bus_init(ds);
|
|
|
|
dn = of_get_child_by_name(ds->dev->of_node, "mdio");
|
|
|
|
err = of_mdiobus_register(ds->slave_mii_bus, dn);
|
|
of_node_put(dn);
|
|
if (err < 0)
|
|
goto free_slave_mii_bus;
|
|
}
|
|
|
|
ds->setup = true;
|
|
devlink_register(ds->devlink);
|
|
return 0;
|
|
|
|
free_slave_mii_bus:
|
|
if (ds->slave_mii_bus && ds->ops->phy_read)
|
|
mdiobus_free(ds->slave_mii_bus);
|
|
teardown:
|
|
if (ds->ops->teardown)
|
|
ds->ops->teardown(ds);
|
|
unregister_notifier:
|
|
dsa_switch_unregister_notifier(ds);
|
|
unregister_devlink_ports:
|
|
dsa_switch_for_each_port(dp, ds)
|
|
dsa_port_devlink_teardown(dp);
|
|
devlink_free(ds->devlink);
|
|
ds->devlink = NULL;
|
|
return err;
|
|
}
|
|
|
|
static void dsa_switch_teardown(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
if (!ds->setup)
|
|
return;
|
|
|
|
if (ds->devlink)
|
|
devlink_unregister(ds->devlink);
|
|
|
|
if (ds->slave_mii_bus && ds->ops->phy_read) {
|
|
mdiobus_unregister(ds->slave_mii_bus);
|
|
mdiobus_free(ds->slave_mii_bus);
|
|
ds->slave_mii_bus = NULL;
|
|
}
|
|
|
|
if (ds->ops->teardown)
|
|
ds->ops->teardown(ds);
|
|
|
|
dsa_switch_unregister_notifier(ds);
|
|
|
|
if (ds->devlink) {
|
|
dsa_switch_for_each_port(dp, ds)
|
|
dsa_port_devlink_teardown(dp);
|
|
devlink_free(ds->devlink);
|
|
ds->devlink = NULL;
|
|
}
|
|
|
|
ds->setup = false;
|
|
}
|
|
|
|
/* First tear down the non-shared, then the shared ports. This ensures that
|
|
* all work items scheduled by our switchdev handlers for user ports have
|
|
* completed before we destroy the refcounting kept on the shared ports.
|
|
*/
|
|
static void dsa_tree_teardown_ports(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_is_user(dp) || dsa_port_is_unused(dp))
|
|
dsa_port_teardown(dp);
|
|
|
|
dsa_flush_workqueue();
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp))
|
|
dsa_port_teardown(dp);
|
|
}
|
|
|
|
static void dsa_tree_teardown_switches(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
dsa_switch_teardown(dp->ds);
|
|
}
|
|
|
|
/* Bring shared ports up first, then non-shared ports */
|
|
static int dsa_tree_setup_ports(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
int err = 0;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) {
|
|
err = dsa_port_setup(dp);
|
|
if (err)
|
|
goto teardown;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) {
|
|
err = dsa_port_setup(dp);
|
|
if (err) {
|
|
err = dsa_port_reinit_as_unused(dp);
|
|
if (err)
|
|
goto teardown;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
teardown:
|
|
dsa_tree_teardown_ports(dst);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_tree_setup_switches(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *dp;
|
|
int err = 0;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
err = dsa_switch_setup(dp->ds);
|
|
if (err) {
|
|
dsa_tree_teardown_switches(dst);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dsa_tree_setup_master(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *cpu_dp;
|
|
int err = 0;
|
|
|
|
rtnl_lock();
|
|
|
|
dsa_tree_for_each_cpu_port(cpu_dp, dst) {
|
|
struct net_device *master = cpu_dp->master;
|
|
bool admin_up = (master->flags & IFF_UP) &&
|
|
!qdisc_tx_is_noop(master);
|
|
|
|
err = dsa_master_setup(master, cpu_dp);
|
|
if (err)
|
|
break;
|
|
|
|
/* Replay master state event */
|
|
dsa_tree_master_admin_state_change(dst, master, admin_up);
|
|
dsa_tree_master_oper_state_change(dst, master,
|
|
netif_oper_up(master));
|
|
}
|
|
|
|
rtnl_unlock();
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_tree_teardown_master(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_port *cpu_dp;
|
|
|
|
rtnl_lock();
|
|
|
|
dsa_tree_for_each_cpu_port(cpu_dp, dst) {
|
|
struct net_device *master = cpu_dp->master;
|
|
|
|
/* Synthesizing an "admin down" state is sufficient for
|
|
* the switches to get a notification if the master is
|
|
* currently up and running.
|
|
*/
|
|
dsa_tree_master_admin_state_change(dst, master, false);
|
|
|
|
dsa_master_teardown(master);
|
|
}
|
|
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static int dsa_tree_setup_lags(struct dsa_switch_tree *dst)
|
|
{
|
|
unsigned int len = 0;
|
|
struct dsa_port *dp;
|
|
|
|
list_for_each_entry(dp, &dst->ports, list) {
|
|
if (dp->ds->num_lag_ids > len)
|
|
len = dp->ds->num_lag_ids;
|
|
}
|
|
|
|
if (!len)
|
|
return 0;
|
|
|
|
dst->lags = kcalloc(len, sizeof(*dst->lags), GFP_KERNEL);
|
|
if (!dst->lags)
|
|
return -ENOMEM;
|
|
|
|
dst->lags_len = len;
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_tree_teardown_lags(struct dsa_switch_tree *dst)
|
|
{
|
|
kfree(dst->lags);
|
|
}
|
|
|
|
static int dsa_tree_setup(struct dsa_switch_tree *dst)
|
|
{
|
|
bool complete;
|
|
int err;
|
|
|
|
if (dst->setup) {
|
|
pr_err("DSA: tree %d already setup! Disjoint trees?\n",
|
|
dst->index);
|
|
return -EEXIST;
|
|
}
|
|
|
|
complete = dsa_tree_setup_routing_table(dst);
|
|
if (!complete)
|
|
return 0;
|
|
|
|
err = dsa_tree_setup_cpu_ports(dst);
|
|
if (err)
|
|
return err;
|
|
|
|
err = dsa_tree_setup_switches(dst);
|
|
if (err)
|
|
goto teardown_cpu_ports;
|
|
|
|
err = dsa_tree_setup_ports(dst);
|
|
if (err)
|
|
goto teardown_switches;
|
|
|
|
err = dsa_tree_setup_master(dst);
|
|
if (err)
|
|
goto teardown_ports;
|
|
|
|
err = dsa_tree_setup_lags(dst);
|
|
if (err)
|
|
goto teardown_master;
|
|
|
|
dst->setup = true;
|
|
|
|
pr_info("DSA: tree %d setup\n", dst->index);
|
|
|
|
return 0;
|
|
|
|
teardown_master:
|
|
dsa_tree_teardown_master(dst);
|
|
teardown_ports:
|
|
dsa_tree_teardown_ports(dst);
|
|
teardown_switches:
|
|
dsa_tree_teardown_switches(dst);
|
|
teardown_cpu_ports:
|
|
dsa_tree_teardown_cpu_ports(dst);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void dsa_tree_teardown(struct dsa_switch_tree *dst)
|
|
{
|
|
struct dsa_link *dl, *next;
|
|
|
|
if (!dst->setup)
|
|
return;
|
|
|
|
dsa_tree_teardown_lags(dst);
|
|
|
|
dsa_tree_teardown_master(dst);
|
|
|
|
dsa_tree_teardown_ports(dst);
|
|
|
|
dsa_tree_teardown_switches(dst);
|
|
|
|
dsa_tree_teardown_cpu_ports(dst);
|
|
|
|
list_for_each_entry_safe(dl, next, &dst->rtable, list) {
|
|
list_del(&dl->list);
|
|
kfree(dl);
|
|
}
|
|
|
|
pr_info("DSA: tree %d torn down\n", dst->index);
|
|
|
|
dst->setup = false;
|
|
}
|
|
|
|
static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst,
|
|
const struct dsa_device_ops *tag_ops)
|
|
{
|
|
const struct dsa_device_ops *old_tag_ops = dst->tag_ops;
|
|
struct dsa_notifier_tag_proto_info info;
|
|
int err;
|
|
|
|
dst->tag_ops = tag_ops;
|
|
|
|
/* Notify the switches from this tree about the connection
|
|
* to the new tagger
|
|
*/
|
|
info.tag_ops = tag_ops;
|
|
err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_CONNECT, &info);
|
|
if (err && err != -EOPNOTSUPP)
|
|
goto out_disconnect;
|
|
|
|
/* Notify the old tagger about the disconnection from this tree */
|
|
info.tag_ops = old_tag_ops;
|
|
dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info);
|
|
|
|
return 0;
|
|
|
|
out_disconnect:
|
|
info.tag_ops = tag_ops;
|
|
dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info);
|
|
dst->tag_ops = old_tag_ops;
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Since the dsa/tagging sysfs device attribute is per master, the assumption
|
|
* is that all DSA switches within a tree share the same tagger, otherwise
|
|
* they would have formed disjoint trees (different "dsa,member" values).
|
|
*/
|
|
int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
|
|
const struct dsa_device_ops *tag_ops,
|
|
const struct dsa_device_ops *old_tag_ops)
|
|
{
|
|
struct dsa_notifier_tag_proto_info info;
|
|
struct dsa_port *dp;
|
|
int err = -EBUSY;
|
|
|
|
if (!rtnl_trylock())
|
|
return restart_syscall();
|
|
|
|
/* At the moment we don't allow changing the tag protocol under
|
|
* traffic. The rtnl_mutex also happens to serialize concurrent
|
|
* attempts to change the tagging protocol. If we ever lift the IFF_UP
|
|
* restriction, there needs to be another mutex which serializes this.
|
|
*/
|
|
dsa_tree_for_each_user_port(dp, dst) {
|
|
if (dsa_port_to_master(dp)->flags & IFF_UP)
|
|
goto out_unlock;
|
|
|
|
if (dp->slave->flags & IFF_UP)
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* Notify the tag protocol change */
|
|
info.tag_ops = tag_ops;
|
|
err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info);
|
|
if (err)
|
|
goto out_unwind_tagger;
|
|
|
|
err = dsa_tree_bind_tag_proto(dst, tag_ops);
|
|
if (err)
|
|
goto out_unwind_tagger;
|
|
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
|
|
out_unwind_tagger:
|
|
info.tag_ops = old_tag_ops;
|
|
dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info);
|
|
out_unlock:
|
|
rtnl_unlock();
|
|
return err;
|
|
}
|
|
|
|
static void dsa_tree_master_state_change(struct dsa_switch_tree *dst,
|
|
struct net_device *master)
|
|
{
|
|
struct dsa_notifier_master_state_info info;
|
|
struct dsa_port *cpu_dp = master->dsa_ptr;
|
|
|
|
info.master = master;
|
|
info.operational = dsa_port_master_is_operational(cpu_dp);
|
|
|
|
dsa_tree_notify(dst, DSA_NOTIFIER_MASTER_STATE_CHANGE, &info);
|
|
}
|
|
|
|
void dsa_tree_master_admin_state_change(struct dsa_switch_tree *dst,
|
|
struct net_device *master,
|
|
bool up)
|
|
{
|
|
struct dsa_port *cpu_dp = master->dsa_ptr;
|
|
bool notify = false;
|
|
|
|
if ((dsa_port_master_is_operational(cpu_dp)) !=
|
|
(up && cpu_dp->master_oper_up))
|
|
notify = true;
|
|
|
|
cpu_dp->master_admin_up = up;
|
|
|
|
if (notify)
|
|
dsa_tree_master_state_change(dst, master);
|
|
}
|
|
|
|
void dsa_tree_master_oper_state_change(struct dsa_switch_tree *dst,
|
|
struct net_device *master,
|
|
bool up)
|
|
{
|
|
struct dsa_port *cpu_dp = master->dsa_ptr;
|
|
bool notify = false;
|
|
|
|
if ((dsa_port_master_is_operational(cpu_dp)) !=
|
|
(cpu_dp->master_admin_up && up))
|
|
notify = true;
|
|
|
|
cpu_dp->master_oper_up = up;
|
|
|
|
if (notify)
|
|
dsa_tree_master_state_change(dst, master);
|
|
}
|
|
|
|
static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index)
|
|
{
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
struct dsa_port *dp;
|
|
|
|
dsa_switch_for_each_port(dp, ds)
|
|
if (dp->index == index)
|
|
return dp;
|
|
|
|
dp = kzalloc(sizeof(*dp), GFP_KERNEL);
|
|
if (!dp)
|
|
return NULL;
|
|
|
|
dp->ds = ds;
|
|
dp->index = index;
|
|
|
|
mutex_init(&dp->addr_lists_lock);
|
|
mutex_init(&dp->vlans_lock);
|
|
INIT_LIST_HEAD(&dp->fdbs);
|
|
INIT_LIST_HEAD(&dp->mdbs);
|
|
INIT_LIST_HEAD(&dp->vlans);
|
|
INIT_LIST_HEAD(&dp->list);
|
|
list_add_tail(&dp->list, &dst->ports);
|
|
|
|
return dp;
|
|
}
|
|
|
|
static int dsa_port_parse_user(struct dsa_port *dp, const char *name)
|
|
{
|
|
if (!name)
|
|
name = "eth%d";
|
|
|
|
dp->type = DSA_PORT_TYPE_USER;
|
|
dp->name = name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_port_parse_dsa(struct dsa_port *dp)
|
|
{
|
|
dp->type = DSA_PORT_TYPE_DSA;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol dsa_get_tag_protocol(struct dsa_port *dp,
|
|
struct net_device *master)
|
|
{
|
|
enum dsa_tag_protocol tag_protocol = DSA_TAG_PROTO_NONE;
|
|
struct dsa_switch *mds, *ds = dp->ds;
|
|
unsigned int mdp_upstream;
|
|
struct dsa_port *mdp;
|
|
|
|
/* It is possible to stack DSA switches onto one another when that
|
|
* happens the switch driver may want to know if its tagging protocol
|
|
* is going to work in such a configuration.
|
|
*/
|
|
if (dsa_slave_dev_check(master)) {
|
|
mdp = dsa_slave_to_port(master);
|
|
mds = mdp->ds;
|
|
mdp_upstream = dsa_upstream_port(mds, mdp->index);
|
|
tag_protocol = mds->ops->get_tag_protocol(mds, mdp_upstream,
|
|
DSA_TAG_PROTO_NONE);
|
|
}
|
|
|
|
/* If the master device is not itself a DSA slave in a disjoint DSA
|
|
* tree, then return immediately.
|
|
*/
|
|
return ds->ops->get_tag_protocol(ds, dp->index, tag_protocol);
|
|
}
|
|
|
|
static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master,
|
|
const char *user_protocol)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
const struct dsa_device_ops *tag_ops;
|
|
enum dsa_tag_protocol default_proto;
|
|
|
|
/* Find out which protocol the switch would prefer. */
|
|
default_proto = dsa_get_tag_protocol(dp, master);
|
|
if (dst->default_proto) {
|
|
if (dst->default_proto != default_proto) {
|
|
dev_err(ds->dev,
|
|
"A DSA switch tree can have only one tagging protocol\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
dst->default_proto = default_proto;
|
|
}
|
|
|
|
/* See if the user wants to override that preference. */
|
|
if (user_protocol) {
|
|
if (!ds->ops->change_tag_protocol) {
|
|
dev_err(ds->dev, "Tag protocol cannot be modified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tag_ops = dsa_find_tagger_by_name(user_protocol);
|
|
} else {
|
|
tag_ops = dsa_tag_driver_get(default_proto);
|
|
}
|
|
|
|
if (IS_ERR(tag_ops)) {
|
|
if (PTR_ERR(tag_ops) == -ENOPROTOOPT)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_warn(ds->dev, "No tagger for this switch\n");
|
|
return PTR_ERR(tag_ops);
|
|
}
|
|
|
|
if (dst->tag_ops) {
|
|
if (dst->tag_ops != tag_ops) {
|
|
dev_err(ds->dev,
|
|
"A DSA switch tree can have only one tagging protocol\n");
|
|
|
|
dsa_tag_driver_put(tag_ops);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* In the case of multiple CPU ports per switch, the tagging
|
|
* protocol is still reference-counted only per switch tree.
|
|
*/
|
|
dsa_tag_driver_put(tag_ops);
|
|
} else {
|
|
dst->tag_ops = tag_ops;
|
|
}
|
|
|
|
dp->master = master;
|
|
dp->type = DSA_PORT_TYPE_CPU;
|
|
dsa_port_set_tag_protocol(dp, dst->tag_ops);
|
|
dp->dst = dst;
|
|
|
|
/* At this point, the tree may be configured to use a different
|
|
* tagger than the one chosen by the switch driver during
|
|
* .setup, in the case when a user selects a custom protocol
|
|
* through the DT.
|
|
*
|
|
* This is resolved by syncing the driver with the tree in
|
|
* dsa_switch_setup_tag_protocol once .setup has run and the
|
|
* driver is ready to accept calls to .change_tag_protocol. If
|
|
* the driver does not support the custom protocol at that
|
|
* point, the tree is wholly rejected, thereby ensuring that the
|
|
* tree and driver are always in agreement on the protocol to
|
|
* use.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_port_parse_of(struct dsa_port *dp, struct device_node *dn)
|
|
{
|
|
struct device_node *ethernet = of_parse_phandle(dn, "ethernet", 0);
|
|
const char *name = of_get_property(dn, "label", NULL);
|
|
bool link = of_property_read_bool(dn, "link");
|
|
|
|
dp->dn = dn;
|
|
|
|
if (ethernet) {
|
|
struct net_device *master;
|
|
const char *user_protocol;
|
|
|
|
master = of_find_net_device_by_node(ethernet);
|
|
of_node_put(ethernet);
|
|
if (!master)
|
|
return -EPROBE_DEFER;
|
|
|
|
user_protocol = of_get_property(dn, "dsa-tag-protocol", NULL);
|
|
return dsa_port_parse_cpu(dp, master, user_protocol);
|
|
}
|
|
|
|
if (link)
|
|
return dsa_port_parse_dsa(dp);
|
|
|
|
return dsa_port_parse_user(dp, name);
|
|
}
|
|
|
|
static int dsa_switch_parse_ports_of(struct dsa_switch *ds,
|
|
struct device_node *dn)
|
|
{
|
|
struct device_node *ports, *port;
|
|
struct dsa_port *dp;
|
|
int err = 0;
|
|
u32 reg;
|
|
|
|
ports = of_get_child_by_name(dn, "ports");
|
|
if (!ports) {
|
|
/* The second possibility is "ethernet-ports" */
|
|
ports = of_get_child_by_name(dn, "ethernet-ports");
|
|
if (!ports) {
|
|
dev_err(ds->dev, "no ports child node found\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
for_each_available_child_of_node(ports, port) {
|
|
err = of_property_read_u32(port, "reg", ®);
|
|
if (err) {
|
|
of_node_put(port);
|
|
goto out_put_node;
|
|
}
|
|
|
|
if (reg >= ds->num_ports) {
|
|
dev_err(ds->dev, "port %pOF index %u exceeds num_ports (%u)\n",
|
|
port, reg, ds->num_ports);
|
|
of_node_put(port);
|
|
err = -EINVAL;
|
|
goto out_put_node;
|
|
}
|
|
|
|
dp = dsa_to_port(ds, reg);
|
|
|
|
err = dsa_port_parse_of(dp, port);
|
|
if (err) {
|
|
of_node_put(port);
|
|
goto out_put_node;
|
|
}
|
|
}
|
|
|
|
out_put_node:
|
|
of_node_put(ports);
|
|
return err;
|
|
}
|
|
|
|
static int dsa_switch_parse_member_of(struct dsa_switch *ds,
|
|
struct device_node *dn)
|
|
{
|
|
u32 m[2] = { 0, 0 };
|
|
int sz;
|
|
|
|
/* Don't error out if this optional property isn't found */
|
|
sz = of_property_read_variable_u32_array(dn, "dsa,member", m, 2, 2);
|
|
if (sz < 0 && sz != -EINVAL)
|
|
return sz;
|
|
|
|
ds->index = m[1];
|
|
|
|
ds->dst = dsa_tree_touch(m[0]);
|
|
if (!ds->dst)
|
|
return -ENOMEM;
|
|
|
|
if (dsa_switch_find(ds->dst->index, ds->index)) {
|
|
dev_err(ds->dev,
|
|
"A DSA switch with index %d already exists in tree %d\n",
|
|
ds->index, ds->dst->index);
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (ds->dst->last_switch < ds->index)
|
|
ds->dst->last_switch = ds->index;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_switch_touch_ports(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_port *dp;
|
|
int port;
|
|
|
|
for (port = 0; port < ds->num_ports; port++) {
|
|
dp = dsa_port_touch(ds, port);
|
|
if (!dp)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_switch_parse_of(struct dsa_switch *ds, struct device_node *dn)
|
|
{
|
|
int err;
|
|
|
|
err = dsa_switch_parse_member_of(ds, dn);
|
|
if (err)
|
|
return err;
|
|
|
|
err = dsa_switch_touch_ports(ds);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_switch_parse_ports_of(ds, dn);
|
|
}
|
|
|
|
static int dsa_port_parse(struct dsa_port *dp, const char *name,
|
|
struct device *dev)
|
|
{
|
|
if (!strcmp(name, "cpu")) {
|
|
struct net_device *master;
|
|
|
|
master = dsa_dev_to_net_device(dev);
|
|
if (!master)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_put(master);
|
|
|
|
return dsa_port_parse_cpu(dp, master, NULL);
|
|
}
|
|
|
|
if (!strcmp(name, "dsa"))
|
|
return dsa_port_parse_dsa(dp);
|
|
|
|
return dsa_port_parse_user(dp, name);
|
|
}
|
|
|
|
static int dsa_switch_parse_ports(struct dsa_switch *ds,
|
|
struct dsa_chip_data *cd)
|
|
{
|
|
bool valid_name_found = false;
|
|
struct dsa_port *dp;
|
|
struct device *dev;
|
|
const char *name;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
for (i = 0; i < DSA_MAX_PORTS; i++) {
|
|
name = cd->port_names[i];
|
|
dev = cd->netdev[i];
|
|
dp = dsa_to_port(ds, i);
|
|
|
|
if (!name)
|
|
continue;
|
|
|
|
err = dsa_port_parse(dp, name, dev);
|
|
if (err)
|
|
return err;
|
|
|
|
valid_name_found = true;
|
|
}
|
|
|
|
if (!valid_name_found && i == DSA_MAX_PORTS)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_switch_parse(struct dsa_switch *ds, struct dsa_chip_data *cd)
|
|
{
|
|
int err;
|
|
|
|
ds->cd = cd;
|
|
|
|
/* We don't support interconnected switches nor multiple trees via
|
|
* platform data, so this is the unique switch of the tree.
|
|
*/
|
|
ds->index = 0;
|
|
ds->dst = dsa_tree_touch(0);
|
|
if (!ds->dst)
|
|
return -ENOMEM;
|
|
|
|
err = dsa_switch_touch_ports(ds);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_switch_parse_ports(ds, cd);
|
|
}
|
|
|
|
static void dsa_switch_release_ports(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_port *dp, *next;
|
|
|
|
dsa_switch_for_each_port_safe(dp, next, ds) {
|
|
WARN_ON(!list_empty(&dp->fdbs));
|
|
WARN_ON(!list_empty(&dp->mdbs));
|
|
WARN_ON(!list_empty(&dp->vlans));
|
|
list_del(&dp->list);
|
|
kfree(dp);
|
|
}
|
|
}
|
|
|
|
static int dsa_switch_probe(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_switch_tree *dst;
|
|
struct dsa_chip_data *pdata;
|
|
struct device_node *np;
|
|
int err;
|
|
|
|
if (!ds->dev)
|
|
return -ENODEV;
|
|
|
|
pdata = ds->dev->platform_data;
|
|
np = ds->dev->of_node;
|
|
|
|
if (!ds->num_ports)
|
|
return -EINVAL;
|
|
|
|
if (np) {
|
|
err = dsa_switch_parse_of(ds, np);
|
|
if (err)
|
|
dsa_switch_release_ports(ds);
|
|
} else if (pdata) {
|
|
err = dsa_switch_parse(ds, pdata);
|
|
if (err)
|
|
dsa_switch_release_ports(ds);
|
|
} else {
|
|
err = -ENODEV;
|
|
}
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
dst = ds->dst;
|
|
dsa_tree_get(dst);
|
|
err = dsa_tree_setup(dst);
|
|
if (err) {
|
|
dsa_switch_release_ports(ds);
|
|
dsa_tree_put(dst);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
int dsa_register_switch(struct dsa_switch *ds)
|
|
{
|
|
int err;
|
|
|
|
mutex_lock(&dsa2_mutex);
|
|
err = dsa_switch_probe(ds);
|
|
dsa_tree_put(ds->dst);
|
|
mutex_unlock(&dsa2_mutex);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_register_switch);
|
|
|
|
static void dsa_switch_remove(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
|
|
dsa_tree_teardown(dst);
|
|
dsa_switch_release_ports(ds);
|
|
dsa_tree_put(dst);
|
|
}
|
|
|
|
void dsa_unregister_switch(struct dsa_switch *ds)
|
|
{
|
|
mutex_lock(&dsa2_mutex);
|
|
dsa_switch_remove(ds);
|
|
mutex_unlock(&dsa2_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_unregister_switch);
|
|
|
|
/* If the DSA master chooses to unregister its net_device on .shutdown, DSA is
|
|
* blocking that operation from completion, due to the dev_hold taken inside
|
|
* netdev_upper_dev_link. Unlink the DSA slave interfaces from being uppers of
|
|
* the DSA master, so that the system can reboot successfully.
|
|
*/
|
|
void dsa_switch_shutdown(struct dsa_switch *ds)
|
|
{
|
|
struct net_device *master, *slave_dev;
|
|
struct dsa_port *dp;
|
|
|
|
mutex_lock(&dsa2_mutex);
|
|
|
|
if (!ds->setup)
|
|
goto out;
|
|
|
|
rtnl_lock();
|
|
|
|
dsa_switch_for_each_user_port(dp, ds) {
|
|
master = dsa_port_to_master(dp);
|
|
slave_dev = dp->slave;
|
|
|
|
netdev_upper_dev_unlink(master, slave_dev);
|
|
}
|
|
|
|
/* Disconnect from further netdevice notifiers on the master,
|
|
* since netdev_uses_dsa() will now return false.
|
|
*/
|
|
dsa_switch_for_each_cpu_port(dp, ds)
|
|
dp->master->dsa_ptr = NULL;
|
|
|
|
rtnl_unlock();
|
|
out:
|
|
mutex_unlock(&dsa2_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_switch_shutdown);
|