linux/fs/fat/misc.c
Jan Kara 58156c8fbf fat: provide option for setting timezone offset
So far FAT either offsets time stamps by sys_tz.minuteswest or leaves them
as they are (when tz=UTC mount option is used).  However in some cases it
is useful if one can specify time stamp offset on his own (e.g.  when time
zone of the camera connected is different from time zone of the computer,
or when HW clock is in UTC and thus sys_tz.minuteswest == 0).

So provide a mount option time_offset= which allows user to specify offset
in minutes that should be applied to time stamps on the filesystem.

akpm: this code would work incorrectly when used via `mount -o remount',
because cached inodes would not be updated.  But fatfs's fat_remount() is
basically a no-op anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:22 -08:00

282 lines
7.6 KiB
C

/*
* linux/fs/fat/misc.c
*
* Written 1992,1993 by Werner Almesberger
* 22/11/2000 - Fixed fat_date_unix2dos for dates earlier than 01/01/1980
* and date_dos2unix for date==0 by Igor Zhbanov(bsg@uniyar.ac.ru)
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/time.h>
#include "fat.h"
/*
* fat_fs_error reports a file system problem that might indicate fa data
* corruption/inconsistency. Depending on 'errors' mount option the
* panic() is called, or error message is printed FAT and nothing is done,
* or filesystem is remounted read-only (default behavior).
* In case the file system is remounted read-only, it can be made writable
* again by remounting it.
*/
void __fat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
{
struct fat_mount_options *opts = &MSDOS_SB(sb)->options;
va_list args;
struct va_format vaf;
if (report) {
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_ERR "FAT-fs (%s): error, %pV\n", sb->s_id, &vaf);
va_end(args);
}
if (opts->errors == FAT_ERRORS_PANIC)
panic("FAT-fs (%s): fs panic from previous error\n", sb->s_id);
else if (opts->errors == FAT_ERRORS_RO && !(sb->s_flags & MS_RDONLY)) {
sb->s_flags |= MS_RDONLY;
printk(KERN_ERR "FAT-fs (%s): Filesystem has been "
"set read-only\n", sb->s_id);
}
}
EXPORT_SYMBOL_GPL(__fat_fs_error);
/**
* fat_msg() - print preformated FAT specific messages. Every thing what is
* not fat_fs_error() should be fat_msg().
*/
void fat_msg(struct super_block *sb, const char *level, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk("%sFAT-fs (%s): %pV\n", level, sb->s_id, &vaf);
va_end(args);
}
/* Flushes the number of free clusters on FAT32 */
/* XXX: Need to write one per FSINFO block. Currently only writes 1 */
int fat_clusters_flush(struct super_block *sb)
{
struct msdos_sb_info *sbi = MSDOS_SB(sb);
struct buffer_head *bh;
struct fat_boot_fsinfo *fsinfo;
if (sbi->fat_bits != 32)
return 0;
bh = sb_bread(sb, sbi->fsinfo_sector);
if (bh == NULL) {
fat_msg(sb, KERN_ERR, "bread failed in fat_clusters_flush");
return -EIO;
}
fsinfo = (struct fat_boot_fsinfo *)bh->b_data;
/* Sanity check */
if (!IS_FSINFO(fsinfo)) {
fat_msg(sb, KERN_ERR, "Invalid FSINFO signature: "
"0x%08x, 0x%08x (sector = %lu)",
le32_to_cpu(fsinfo->signature1),
le32_to_cpu(fsinfo->signature2),
sbi->fsinfo_sector);
} else {
if (sbi->free_clusters != -1)
fsinfo->free_clusters = cpu_to_le32(sbi->free_clusters);
if (sbi->prev_free != -1)
fsinfo->next_cluster = cpu_to_le32(sbi->prev_free);
mark_buffer_dirty(bh);
}
brelse(bh);
return 0;
}
/*
* fat_chain_add() adds a new cluster to the chain of clusters represented
* by inode.
*/
int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster)
{
struct super_block *sb = inode->i_sb;
struct msdos_sb_info *sbi = MSDOS_SB(sb);
int ret, new_fclus, last;
/*
* We must locate the last cluster of the file to add this new
* one (new_dclus) to the end of the link list (the FAT).
*/
last = new_fclus = 0;
if (MSDOS_I(inode)->i_start) {
int fclus, dclus;
ret = fat_get_cluster(inode, FAT_ENT_EOF, &fclus, &dclus);
if (ret < 0)
return ret;
new_fclus = fclus + 1;
last = dclus;
}
/* add new one to the last of the cluster chain */
if (last) {
struct fat_entry fatent;
fatent_init(&fatent);
ret = fat_ent_read(inode, &fatent, last);
if (ret >= 0) {
int wait = inode_needs_sync(inode);
ret = fat_ent_write(inode, &fatent, new_dclus, wait);
fatent_brelse(&fatent);
}
if (ret < 0)
return ret;
// fat_cache_add(inode, new_fclus, new_dclus);
} else {
MSDOS_I(inode)->i_start = new_dclus;
MSDOS_I(inode)->i_logstart = new_dclus;
/*
* Since generic_write_sync() synchronizes regular files later,
* we sync here only directories.
*/
if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode)) {
ret = fat_sync_inode(inode);
if (ret)
return ret;
} else
mark_inode_dirty(inode);
}
if (new_fclus != (inode->i_blocks >> (sbi->cluster_bits - 9))) {
fat_fs_error(sb, "clusters badly computed (%d != %llu)",
new_fclus,
(llu)(inode->i_blocks >> (sbi->cluster_bits - 9)));
fat_cache_inval_inode(inode);
}
inode->i_blocks += nr_cluster << (sbi->cluster_bits - 9);
return 0;
}
extern struct timezone sys_tz;
/*
* The epoch of FAT timestamp is 1980.
* : bits : value
* date: 0 - 4: day (1 - 31)
* date: 5 - 8: month (1 - 12)
* date: 9 - 15: year (0 - 127) from 1980
* time: 0 - 4: sec (0 - 29) 2sec counts
* time: 5 - 10: min (0 - 59)
* time: 11 - 15: hour (0 - 23)
*/
#define SECS_PER_MIN 60
#define SECS_PER_HOUR (60 * 60)
#define SECS_PER_DAY (SECS_PER_HOUR * 24)
/* days between 1.1.70 and 1.1.80 (2 leap days) */
#define DAYS_DELTA (365 * 10 + 2)
/* 120 (2100 - 1980) isn't leap year */
#define YEAR_2100 120
#define IS_LEAP_YEAR(y) (!((y) & 3) && (y) != YEAR_2100)
/* Linear day numbers of the respective 1sts in non-leap years. */
static time_t days_in_year[] = {
/* Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec */
0, 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 0, 0, 0,
};
/* Convert a FAT time/date pair to a UNIX date (seconds since 1 1 70). */
void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
__le16 __time, __le16 __date, u8 time_cs)
{
u16 time = le16_to_cpu(__time), date = le16_to_cpu(__date);
time_t second, day, leap_day, month, year;
year = date >> 9;
month = max(1, (date >> 5) & 0xf);
day = max(1, date & 0x1f) - 1;
leap_day = (year + 3) / 4;
if (year > YEAR_2100) /* 2100 isn't leap year */
leap_day--;
if (IS_LEAP_YEAR(year) && month > 2)
leap_day++;
second = (time & 0x1f) << 1;
second += ((time >> 5) & 0x3f) * SECS_PER_MIN;
second += (time >> 11) * SECS_PER_HOUR;
second += (year * 365 + leap_day
+ days_in_year[month] + day
+ DAYS_DELTA) * SECS_PER_DAY;
if (!sbi->options.tz_set)
second += sys_tz.tz_minuteswest * SECS_PER_MIN;
else
second -= sbi->options.time_offset * SECS_PER_MIN;
if (time_cs) {
ts->tv_sec = second + (time_cs / 100);
ts->tv_nsec = (time_cs % 100) * 10000000;
} else {
ts->tv_sec = second;
ts->tv_nsec = 0;
}
}
/* Convert linear UNIX date to a FAT time/date pair. */
void fat_time_unix2fat(struct msdos_sb_info *sbi, struct timespec *ts,
__le16 *time, __le16 *date, u8 *time_cs)
{
struct tm tm;
time_to_tm(ts->tv_sec,
(sbi->options.tz_set ? sbi->options.time_offset :
-sys_tz.tz_minuteswest) * SECS_PER_MIN, &tm);
/* FAT can only support year between 1980 to 2107 */
if (tm.tm_year < 1980 - 1900) {
*time = 0;
*date = cpu_to_le16((0 << 9) | (1 << 5) | 1);
if (time_cs)
*time_cs = 0;
return;
}
if (tm.tm_year > 2107 - 1900) {
*time = cpu_to_le16((23 << 11) | (59 << 5) | 29);
*date = cpu_to_le16((127 << 9) | (12 << 5) | 31);
if (time_cs)
*time_cs = 199;
return;
}
/* from 1900 -> from 1980 */
tm.tm_year -= 80;
/* 0~11 -> 1~12 */
tm.tm_mon++;
/* 0~59 -> 0~29(2sec counts) */
tm.tm_sec >>= 1;
*time = cpu_to_le16(tm.tm_hour << 11 | tm.tm_min << 5 | tm.tm_sec);
*date = cpu_to_le16(tm.tm_year << 9 | tm.tm_mon << 5 | tm.tm_mday);
if (time_cs)
*time_cs = (ts->tv_sec & 1) * 100 + ts->tv_nsec / 10000000;
}
EXPORT_SYMBOL_GPL(fat_time_unix2fat);
int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs)
{
int i, err = 0;
for (i = 0; i < nr_bhs; i++)
write_dirty_buffer(bhs[i], WRITE);
for (i = 0; i < nr_bhs; i++) {
wait_on_buffer(bhs[i]);
if (!err && !buffer_uptodate(bhs[i]))
err = -EIO;
}
return err;
}