9a6c2febdc
This patch adds support for the 1.175V mode on the LDO1 regulator on the wm5110. This is need as part of the low power sleep mode operation. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
329 lines
8.0 KiB
C
329 lines
8.0 KiB
C
/*
|
|
* arizona-ldo1.c -- LDO1 supply for Arizona devices
|
|
*
|
|
* Copyright 2012 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/arizona/core.h>
|
|
#include <linux/mfd/arizona/pdata.h>
|
|
#include <linux/mfd/arizona/registers.h>
|
|
|
|
struct arizona_ldo1 {
|
|
struct regulator_dev *regulator;
|
|
struct arizona *arizona;
|
|
|
|
struct regulator_consumer_supply supply;
|
|
struct regulator_init_data init_data;
|
|
};
|
|
|
|
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
if (selector >= rdev->desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
if (selector == rdev->desc->n_voltages - 1)
|
|
return 1800000;
|
|
else
|
|
return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
|
|
}
|
|
|
|
static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV)
|
|
{
|
|
int sel;
|
|
|
|
sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
|
|
if (sel >= rdev->desc->n_voltages)
|
|
sel = rdev->desc->n_voltages - 1;
|
|
|
|
return sel;
|
|
}
|
|
|
|
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned sel)
|
|
{
|
|
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
|
|
struct regmap *regmap = ldo->arizona->regmap;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (sel == rdev->desc->n_voltages - 1)
|
|
val = ARIZONA_LDO1_HI_PWR;
|
|
else
|
|
val = 0;
|
|
|
|
ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
|
|
ARIZONA_LDO1_HI_PWR, val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
|
|
ARIZONA_SUBSYS_MAX_FREQ, val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (val)
|
|
return 0;
|
|
|
|
val = sel << ARIZONA_LDO1_VSEL_SHIFT;
|
|
|
|
return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
|
|
ARIZONA_LDO1_VSEL_MASK, val);
|
|
}
|
|
|
|
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
|
|
struct regmap *regmap = ldo->arizona->regmap;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (val & ARIZONA_LDO1_HI_PWR)
|
|
return rdev->desc->n_voltages - 1;
|
|
|
|
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
|
|
}
|
|
|
|
static struct regulator_ops arizona_ldo1_hc_ops = {
|
|
.list_voltage = arizona_ldo1_hc_list_voltage,
|
|
.map_voltage = arizona_ldo1_hc_map_voltage,
|
|
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
|
|
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
|
|
.get_bypass = regulator_get_bypass_regmap,
|
|
.set_bypass = regulator_set_bypass_regmap,
|
|
};
|
|
|
|
static const struct regulator_desc arizona_ldo1_hc = {
|
|
.name = "LDO1",
|
|
.supply_name = "LDOVDD",
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &arizona_ldo1_hc_ops,
|
|
|
|
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
|
|
.bypass_mask = ARIZONA_LDO1_BYPASS,
|
|
.min_uV = 900000,
|
|
.uV_step = 50000,
|
|
.n_voltages = 8,
|
|
.enable_time = 1500,
|
|
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct regulator_ops arizona_ldo1_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_desc arizona_ldo1 = {
|
|
.name = "LDO1",
|
|
.supply_name = "LDOVDD",
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &arizona_ldo1_ops,
|
|
|
|
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
|
|
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
|
|
.min_uV = 900000,
|
|
.uV_step = 25000,
|
|
.n_voltages = 13,
|
|
.enable_time = 500,
|
|
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct regulator_init_data arizona_ldo1_dvfs = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 1800000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
|
|
REGULATOR_CHANGE_VOLTAGE,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
};
|
|
|
|
static const struct regulator_init_data arizona_ldo1_default = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
};
|
|
|
|
static const struct regulator_init_data arizona_ldo1_wm5110 = {
|
|
.constraints = {
|
|
.min_uV = 1175000,
|
|
.max_uV = 1200000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
|
|
REGULATOR_CHANGE_VOLTAGE,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
};
|
|
|
|
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
|
|
struct regulator_config *config,
|
|
const struct regulator_desc *desc)
|
|
{
|
|
struct arizona_pdata *pdata = &arizona->pdata;
|
|
struct arizona_ldo1 *ldo1 = config->driver_data;
|
|
struct device_node *init_node, *dcvdd_node;
|
|
struct regulator_init_data *init_data;
|
|
|
|
pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
|
|
|
|
init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
|
|
dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
|
|
|
|
if (init_node) {
|
|
config->of_node = init_node;
|
|
|
|
init_data = of_get_regulator_init_data(arizona->dev, init_node,
|
|
desc);
|
|
|
|
if (init_data) {
|
|
init_data->consumer_supplies = &ldo1->supply;
|
|
init_data->num_consumer_supplies = 1;
|
|
|
|
if (dcvdd_node && dcvdd_node != init_node)
|
|
arizona->external_dcvdd = true;
|
|
|
|
pdata->ldo1 = init_data;
|
|
}
|
|
} else if (dcvdd_node) {
|
|
arizona->external_dcvdd = true;
|
|
}
|
|
|
|
of_node_put(dcvdd_node);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_ldo1_probe(struct platform_device *pdev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
|
|
const struct regulator_desc *desc;
|
|
struct regulator_config config = { };
|
|
struct arizona_ldo1 *ldo1;
|
|
int ret;
|
|
|
|
arizona->external_dcvdd = false;
|
|
|
|
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
|
|
if (!ldo1)
|
|
return -ENOMEM;
|
|
|
|
ldo1->arizona = arizona;
|
|
|
|
/*
|
|
* Since the chip usually supplies itself we provide some
|
|
* default init_data for it. This will be overridden with
|
|
* platform data if provided.
|
|
*/
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
case WM8997:
|
|
desc = &arizona_ldo1_hc;
|
|
ldo1->init_data = arizona_ldo1_dvfs;
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
desc = &arizona_ldo1;
|
|
ldo1->init_data = arizona_ldo1_wm5110;
|
|
break;
|
|
default:
|
|
desc = &arizona_ldo1;
|
|
ldo1->init_data = arizona_ldo1_default;
|
|
break;
|
|
}
|
|
|
|
ldo1->init_data.consumer_supplies = &ldo1->supply;
|
|
ldo1->supply.supply = "DCVDD";
|
|
ldo1->supply.dev_name = dev_name(arizona->dev);
|
|
|
|
config.dev = arizona->dev;
|
|
config.driver_data = ldo1;
|
|
config.regmap = arizona->regmap;
|
|
|
|
if (IS_ENABLED(CONFIG_OF)) {
|
|
if (!dev_get_platdata(arizona->dev)) {
|
|
ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
config.ena_gpio_initialized = true;
|
|
}
|
|
}
|
|
|
|
config.ena_gpio = arizona->pdata.ldoena;
|
|
|
|
if (arizona->pdata.ldo1)
|
|
config.init_data = arizona->pdata.ldo1;
|
|
else
|
|
config.init_data = &ldo1->init_data;
|
|
|
|
/*
|
|
* LDO1 can only be used to supply DCVDD so if it has no
|
|
* consumers then DCVDD is supplied externally.
|
|
*/
|
|
if (config.init_data->num_consumer_supplies == 0)
|
|
arizona->external_dcvdd = true;
|
|
|
|
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
|
|
|
|
of_node_put(config.of_node);
|
|
|
|
if (IS_ERR(ldo1->regulator)) {
|
|
ret = PTR_ERR(ldo1->regulator);
|
|
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ldo1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver arizona_ldo1_driver = {
|
|
.probe = arizona_ldo1_probe,
|
|
.driver = {
|
|
.name = "arizona-ldo1",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(arizona_ldo1_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("Arizona LDO1 driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:arizona-ldo1");
|