Thinh Nguyen 9ba3aca8fe usb: dwc3: Disable phy suspend after power-on reset
For DRD controllers, the programming guide recommended that
GUSB3PIPECTL.SUSPENDABLE and GUSB2PHYCFG.SUSPHY to be cleared after
power-on reset and only set after the controller initialization is
completed. This can be done after device soft-reset in dwc3_core_init().
This patch makes sure to clear GUSB3PIPECTL.SUSPENDABLE and
GUSB2PHYCFG.SUSPHY before core initialization and only set them after
the device soft-reset is completed.

Reference: DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section
1.2.49 and 1.2.45

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22 10:26:45 +03:00
..
2019-10-18 08:38:26 -07:00
2019-09-22 09:39:09 -07:00
2019-09-30 10:04:28 -07:00
2019-10-03 09:15:19 -07:00
2019-09-22 09:30:30 -07:00
2019-09-22 09:39:09 -07:00
2019-09-19 14:14:28 -07:00
2019-09-18 11:14:31 -07:00
2019-09-22 12:02:21 -07:00
2019-09-28 20:44:12 +02:00
2019-10-14 20:35:58 +02:00
2019-10-18 22:29:36 -04:00
2019-09-23 17:20:40 -04:00
2019-09-29 10:33:41 -07:00
2019-10-15 23:51:36 +02:00
2019-09-23 19:16:01 -07:00
2019-09-27 12:19:47 -07:00
2019-09-17 18:40:42 -07:00
2019-09-22 10:55:08 -07:00
2019-09-30 10:04:28 -07:00
2019-09-22 11:05:43 -07:00
2019-09-16 15:52:38 -07:00
2019-09-22 10:52:23 -07:00
2019-09-17 18:40:42 -07:00
2019-09-24 15:54:08 -07:00
2019-09-18 11:14:31 -07:00
2019-09-27 11:17:38 -07:00
2019-09-18 11:05:34 -07:00