9bbe60a67b
ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit14afee4b60
("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes:158f323b98
("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
870 lines
23 KiB
C
870 lines
23 KiB
C
/*
|
|
* Ethernet netdevice using ATM AAL5 as underlying carrier
|
|
* (RFC1483 obsoleted by RFC2684) for Linux
|
|
*
|
|
* Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
|
|
* Eric Kinzie, 2006-2007, US Naval Research Laboratory
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/slab.h>
|
|
#include <net/arp.h>
|
|
#include <linux/atm.h>
|
|
#include <linux/atmdev.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/atmbr2684.h>
|
|
|
|
#include "common.h"
|
|
|
|
static void skb_debug(const struct sk_buff *skb)
|
|
{
|
|
#ifdef SKB_DEBUG
|
|
#define NUM2PRINT 50
|
|
print_hex_dump(KERN_DEBUG, "br2684: skb: ", DUMP_OFFSET,
|
|
16, 1, skb->data, min(NUM2PRINT, skb->len), true);
|
|
#endif
|
|
}
|
|
|
|
#define BR2684_ETHERTYPE_LEN 2
|
|
#define BR2684_PAD_LEN 2
|
|
|
|
#define LLC 0xaa, 0xaa, 0x03
|
|
#define SNAP_BRIDGED 0x00, 0x80, 0xc2
|
|
#define SNAP_ROUTED 0x00, 0x00, 0x00
|
|
#define PID_ETHERNET 0x00, 0x07
|
|
#define ETHERTYPE_IPV4 0x08, 0x00
|
|
#define ETHERTYPE_IPV6 0x86, 0xdd
|
|
#define PAD_BRIDGED 0x00, 0x00
|
|
|
|
static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
|
|
static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
|
|
static const unsigned char llc_oui_pid_pad[] =
|
|
{ LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
|
|
static const unsigned char pad[] = { PAD_BRIDGED };
|
|
static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
|
|
static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
|
|
|
|
enum br2684_encaps {
|
|
e_vc = BR2684_ENCAPS_VC,
|
|
e_llc = BR2684_ENCAPS_LLC,
|
|
};
|
|
|
|
struct br2684_vcc {
|
|
struct atm_vcc *atmvcc;
|
|
struct net_device *device;
|
|
/* keep old push, pop functions for chaining */
|
|
void (*old_push)(struct atm_vcc *vcc, struct sk_buff *skb);
|
|
void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb);
|
|
void (*old_release_cb)(struct atm_vcc *vcc);
|
|
struct module *old_owner;
|
|
enum br2684_encaps encaps;
|
|
struct list_head brvccs;
|
|
#ifdef CONFIG_ATM_BR2684_IPFILTER
|
|
struct br2684_filter filter;
|
|
#endif /* CONFIG_ATM_BR2684_IPFILTER */
|
|
unsigned int copies_needed, copies_failed;
|
|
atomic_t qspace;
|
|
};
|
|
|
|
struct br2684_dev {
|
|
struct net_device *net_dev;
|
|
struct list_head br2684_devs;
|
|
int number;
|
|
struct list_head brvccs; /* one device <=> one vcc (before xmas) */
|
|
int mac_was_set;
|
|
enum br2684_payload payload;
|
|
};
|
|
|
|
/*
|
|
* This lock should be held for writing any time the list of devices or
|
|
* their attached vcc's could be altered. It should be held for reading
|
|
* any time these are being queried. Note that we sometimes need to
|
|
* do read-locking under interrupt context, so write locking must block
|
|
* the current CPU's interrupts
|
|
*/
|
|
static DEFINE_RWLOCK(devs_lock);
|
|
|
|
static LIST_HEAD(br2684_devs);
|
|
|
|
static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
|
|
{
|
|
return netdev_priv(net_dev);
|
|
}
|
|
|
|
static inline struct net_device *list_entry_brdev(const struct list_head *le)
|
|
{
|
|
return list_entry(le, struct br2684_dev, br2684_devs)->net_dev;
|
|
}
|
|
|
|
static inline struct br2684_vcc *BR2684_VCC(const struct atm_vcc *atmvcc)
|
|
{
|
|
return (struct br2684_vcc *)(atmvcc->user_back);
|
|
}
|
|
|
|
static inline struct br2684_vcc *list_entry_brvcc(const struct list_head *le)
|
|
{
|
|
return list_entry(le, struct br2684_vcc, brvccs);
|
|
}
|
|
|
|
/* Caller should hold read_lock(&devs_lock) */
|
|
static struct net_device *br2684_find_dev(const struct br2684_if_spec *s)
|
|
{
|
|
struct list_head *lh;
|
|
struct net_device *net_dev;
|
|
switch (s->method) {
|
|
case BR2684_FIND_BYNUM:
|
|
list_for_each(lh, &br2684_devs) {
|
|
net_dev = list_entry_brdev(lh);
|
|
if (BRPRIV(net_dev)->number == s->spec.devnum)
|
|
return net_dev;
|
|
}
|
|
break;
|
|
case BR2684_FIND_BYIFNAME:
|
|
list_for_each(lh, &br2684_devs) {
|
|
net_dev = list_entry_brdev(lh);
|
|
if (!strncmp(net_dev->name, s->spec.ifname, IFNAMSIZ))
|
|
return net_dev;
|
|
}
|
|
break;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int atm_dev_event(struct notifier_block *this, unsigned long event,
|
|
void *arg)
|
|
{
|
|
struct atm_dev *atm_dev = arg;
|
|
struct list_head *lh;
|
|
struct net_device *net_dev;
|
|
struct br2684_vcc *brvcc;
|
|
struct atm_vcc *atm_vcc;
|
|
unsigned long flags;
|
|
|
|
pr_debug("event=%ld dev=%p\n", event, atm_dev);
|
|
|
|
read_lock_irqsave(&devs_lock, flags);
|
|
list_for_each(lh, &br2684_devs) {
|
|
net_dev = list_entry_brdev(lh);
|
|
|
|
list_for_each_entry(brvcc, &BRPRIV(net_dev)->brvccs, brvccs) {
|
|
atm_vcc = brvcc->atmvcc;
|
|
if (atm_vcc && brvcc->atmvcc->dev == atm_dev) {
|
|
|
|
if (atm_vcc->dev->signal == ATM_PHY_SIG_LOST)
|
|
netif_carrier_off(net_dev);
|
|
else
|
|
netif_carrier_on(net_dev);
|
|
|
|
}
|
|
}
|
|
}
|
|
read_unlock_irqrestore(&devs_lock, flags);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block atm_dev_notifier = {
|
|
.notifier_call = atm_dev_event,
|
|
};
|
|
|
|
/* chained vcc->pop function. Check if we should wake the netif_queue */
|
|
static void br2684_pop(struct atm_vcc *vcc, struct sk_buff *skb)
|
|
{
|
|
struct br2684_vcc *brvcc = BR2684_VCC(vcc);
|
|
|
|
pr_debug("(vcc %p ; net_dev %p )\n", vcc, brvcc->device);
|
|
brvcc->old_pop(vcc, skb);
|
|
|
|
/* If the queue space just went up from zero, wake */
|
|
if (atomic_inc_return(&brvcc->qspace) == 1)
|
|
netif_wake_queue(brvcc->device);
|
|
}
|
|
|
|
/*
|
|
* Send a packet out a particular vcc. Not to useful right now, but paves
|
|
* the way for multiple vcc's per itf. Returns true if we can send,
|
|
* otherwise false
|
|
*/
|
|
static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
|
|
struct br2684_vcc *brvcc)
|
|
{
|
|
struct br2684_dev *brdev = BRPRIV(dev);
|
|
struct atm_vcc *atmvcc;
|
|
int minheadroom = (brvcc->encaps == e_llc) ?
|
|
((brdev->payload == p_bridged) ?
|
|
sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
|
|
((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
|
|
|
|
if (skb_headroom(skb) < minheadroom) {
|
|
struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
|
|
brvcc->copies_needed++;
|
|
dev_kfree_skb(skb);
|
|
if (skb2 == NULL) {
|
|
brvcc->copies_failed++;
|
|
return 0;
|
|
}
|
|
skb = skb2;
|
|
}
|
|
|
|
if (brvcc->encaps == e_llc) {
|
|
if (brdev->payload == p_bridged) {
|
|
skb_push(skb, sizeof(llc_oui_pid_pad));
|
|
skb_copy_to_linear_data(skb, llc_oui_pid_pad,
|
|
sizeof(llc_oui_pid_pad));
|
|
} else if (brdev->payload == p_routed) {
|
|
unsigned short prot = ntohs(skb->protocol);
|
|
|
|
skb_push(skb, sizeof(llc_oui_ipv4));
|
|
switch (prot) {
|
|
case ETH_P_IP:
|
|
skb_copy_to_linear_data(skb, llc_oui_ipv4,
|
|
sizeof(llc_oui_ipv4));
|
|
break;
|
|
case ETH_P_IPV6:
|
|
skb_copy_to_linear_data(skb, llc_oui_ipv6,
|
|
sizeof(llc_oui_ipv6));
|
|
break;
|
|
default:
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
}
|
|
} else { /* e_vc */
|
|
if (brdev->payload == p_bridged) {
|
|
skb_push(skb, 2);
|
|
memset(skb->data, 0, 2);
|
|
}
|
|
}
|
|
skb_debug(skb);
|
|
|
|
ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
|
|
pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
|
|
atm_account_tx(atmvcc, skb);
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += skb->len;
|
|
|
|
if (atomic_dec_return(&brvcc->qspace) < 1) {
|
|
/* No more please! */
|
|
netif_stop_queue(brvcc->device);
|
|
/* We might have raced with br2684_pop() */
|
|
if (unlikely(atomic_read(&brvcc->qspace) > 0))
|
|
netif_wake_queue(brvcc->device);
|
|
}
|
|
|
|
/* If this fails immediately, the skb will be freed and br2684_pop()
|
|
will wake the queue if appropriate. Just return an error so that
|
|
the stats are updated correctly */
|
|
return !atmvcc->send(atmvcc, skb);
|
|
}
|
|
|
|
static void br2684_release_cb(struct atm_vcc *atmvcc)
|
|
{
|
|
struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
|
|
|
|
if (atomic_read(&brvcc->qspace) > 0)
|
|
netif_wake_queue(brvcc->device);
|
|
|
|
if (brvcc->old_release_cb)
|
|
brvcc->old_release_cb(atmvcc);
|
|
}
|
|
|
|
static inline struct br2684_vcc *pick_outgoing_vcc(const struct sk_buff *skb,
|
|
const struct br2684_dev *brdev)
|
|
{
|
|
return list_empty(&brdev->brvccs) ? NULL : list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
|
|
}
|
|
|
|
static netdev_tx_t br2684_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct br2684_dev *brdev = BRPRIV(dev);
|
|
struct br2684_vcc *brvcc;
|
|
struct atm_vcc *atmvcc;
|
|
netdev_tx_t ret = NETDEV_TX_OK;
|
|
|
|
pr_debug("skb_dst(skb)=%p\n", skb_dst(skb));
|
|
read_lock(&devs_lock);
|
|
brvcc = pick_outgoing_vcc(skb, brdev);
|
|
if (brvcc == NULL) {
|
|
pr_debug("no vcc attached to dev %s\n", dev->name);
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_carrier_errors++;
|
|
/* netif_stop_queue(dev); */
|
|
dev_kfree_skb(skb);
|
|
goto out_devs;
|
|
}
|
|
atmvcc = brvcc->atmvcc;
|
|
|
|
bh_lock_sock(sk_atm(atmvcc));
|
|
|
|
if (test_bit(ATM_VF_RELEASED, &atmvcc->flags) ||
|
|
test_bit(ATM_VF_CLOSE, &atmvcc->flags) ||
|
|
!test_bit(ATM_VF_READY, &atmvcc->flags)) {
|
|
dev->stats.tx_dropped++;
|
|
dev_kfree_skb(skb);
|
|
goto out;
|
|
}
|
|
|
|
if (sock_owned_by_user(sk_atm(atmvcc))) {
|
|
netif_stop_queue(brvcc->device);
|
|
ret = NETDEV_TX_BUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (!br2684_xmit_vcc(skb, dev, brvcc)) {
|
|
/*
|
|
* We should probably use netif_*_queue() here, but that
|
|
* involves added complication. We need to walk before
|
|
* we can run.
|
|
*
|
|
* Don't free here! this pointer might be no longer valid!
|
|
*/
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_fifo_errors++;
|
|
}
|
|
out:
|
|
bh_unlock_sock(sk_atm(atmvcc));
|
|
out_devs:
|
|
read_unlock(&devs_lock);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* We remember when the MAC gets set, so we don't override it later with
|
|
* the ESI of the ATM card of the first VC
|
|
*/
|
|
static int br2684_mac_addr(struct net_device *dev, void *p)
|
|
{
|
|
int err = eth_mac_addr(dev, p);
|
|
if (!err)
|
|
BRPRIV(dev)->mac_was_set = 1;
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_ATM_BR2684_IPFILTER
|
|
/* this IOCTL is experimental. */
|
|
static int br2684_setfilt(struct atm_vcc *atmvcc, void __user * arg)
|
|
{
|
|
struct br2684_vcc *brvcc;
|
|
struct br2684_filter_set fs;
|
|
|
|
if (copy_from_user(&fs, arg, sizeof fs))
|
|
return -EFAULT;
|
|
if (fs.ifspec.method != BR2684_FIND_BYNOTHING) {
|
|
/*
|
|
* This is really a per-vcc thing, but we can also search
|
|
* by device.
|
|
*/
|
|
struct br2684_dev *brdev;
|
|
read_lock(&devs_lock);
|
|
brdev = BRPRIV(br2684_find_dev(&fs.ifspec));
|
|
if (brdev == NULL || list_empty(&brdev->brvccs) ||
|
|
brdev->brvccs.next != brdev->brvccs.prev) /* >1 VCC */
|
|
brvcc = NULL;
|
|
else
|
|
brvcc = list_entry_brvcc(brdev->brvccs.next);
|
|
read_unlock(&devs_lock);
|
|
if (brvcc == NULL)
|
|
return -ESRCH;
|
|
} else
|
|
brvcc = BR2684_VCC(atmvcc);
|
|
memcpy(&brvcc->filter, &fs.filter, sizeof(brvcc->filter));
|
|
return 0;
|
|
}
|
|
|
|
/* Returns 1 if packet should be dropped */
|
|
static inline int
|
|
packet_fails_filter(__be16 type, struct br2684_vcc *brvcc, struct sk_buff *skb)
|
|
{
|
|
if (brvcc->filter.netmask == 0)
|
|
return 0; /* no filter in place */
|
|
if (type == htons(ETH_P_IP) &&
|
|
(((struct iphdr *)(skb->data))->daddr & brvcc->filter.
|
|
netmask) == brvcc->filter.prefix)
|
|
return 0;
|
|
if (type == htons(ETH_P_ARP))
|
|
return 0;
|
|
/*
|
|
* TODO: we should probably filter ARPs too.. don't want to have
|
|
* them returning values that don't make sense, or is that ok?
|
|
*/
|
|
return 1; /* drop */
|
|
}
|
|
#endif /* CONFIG_ATM_BR2684_IPFILTER */
|
|
|
|
static void br2684_close_vcc(struct br2684_vcc *brvcc)
|
|
{
|
|
pr_debug("removing VCC %p from dev %p\n", brvcc, brvcc->device);
|
|
write_lock_irq(&devs_lock);
|
|
list_del(&brvcc->brvccs);
|
|
write_unlock_irq(&devs_lock);
|
|
brvcc->atmvcc->user_back = NULL; /* what about vcc->recvq ??? */
|
|
brvcc->atmvcc->release_cb = brvcc->old_release_cb;
|
|
brvcc->old_push(brvcc->atmvcc, NULL); /* pass on the bad news */
|
|
module_put(brvcc->old_owner);
|
|
kfree(brvcc);
|
|
}
|
|
|
|
/* when AAL5 PDU comes in: */
|
|
static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
|
|
{
|
|
struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
|
|
struct net_device *net_dev = brvcc->device;
|
|
struct br2684_dev *brdev = BRPRIV(net_dev);
|
|
|
|
pr_debug("\n");
|
|
|
|
if (unlikely(skb == NULL)) {
|
|
/* skb==NULL means VCC is being destroyed */
|
|
br2684_close_vcc(brvcc);
|
|
if (list_empty(&brdev->brvccs)) {
|
|
write_lock_irq(&devs_lock);
|
|
list_del(&brdev->br2684_devs);
|
|
write_unlock_irq(&devs_lock);
|
|
unregister_netdev(net_dev);
|
|
free_netdev(net_dev);
|
|
}
|
|
return;
|
|
}
|
|
|
|
skb_debug(skb);
|
|
atm_return(atmvcc, skb->truesize);
|
|
pr_debug("skb from brdev %p\n", brdev);
|
|
if (brvcc->encaps == e_llc) {
|
|
|
|
if (skb->len > 7 && skb->data[7] == 0x01)
|
|
__skb_trim(skb, skb->len - 4);
|
|
|
|
/* accept packets that have "ipv[46]" in the snap header */
|
|
if ((skb->len >= (sizeof(llc_oui_ipv4))) &&
|
|
(memcmp(skb->data, llc_oui_ipv4,
|
|
sizeof(llc_oui_ipv4) - BR2684_ETHERTYPE_LEN) == 0)) {
|
|
if (memcmp(skb->data + 6, ethertype_ipv6,
|
|
sizeof(ethertype_ipv6)) == 0)
|
|
skb->protocol = htons(ETH_P_IPV6);
|
|
else if (memcmp(skb->data + 6, ethertype_ipv4,
|
|
sizeof(ethertype_ipv4)) == 0)
|
|
skb->protocol = htons(ETH_P_IP);
|
|
else
|
|
goto error;
|
|
skb_pull(skb, sizeof(llc_oui_ipv4));
|
|
skb_reset_network_header(skb);
|
|
skb->pkt_type = PACKET_HOST;
|
|
/*
|
|
* Let us waste some time for checking the encapsulation.
|
|
* Note, that only 7 char is checked so frames with a valid FCS
|
|
* are also accepted (but FCS is not checked of course).
|
|
*/
|
|
} else if ((skb->len >= sizeof(llc_oui_pid_pad)) &&
|
|
(memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
|
|
skb_pull(skb, sizeof(llc_oui_pid_pad));
|
|
skb->protocol = eth_type_trans(skb, net_dev);
|
|
} else
|
|
goto error;
|
|
|
|
} else { /* e_vc */
|
|
if (brdev->payload == p_routed) {
|
|
struct iphdr *iph;
|
|
|
|
skb_reset_network_header(skb);
|
|
iph = ip_hdr(skb);
|
|
if (iph->version == 4)
|
|
skb->protocol = htons(ETH_P_IP);
|
|
else if (iph->version == 6)
|
|
skb->protocol = htons(ETH_P_IPV6);
|
|
else
|
|
goto error;
|
|
skb->pkt_type = PACKET_HOST;
|
|
} else { /* p_bridged */
|
|
/* first 2 chars should be 0 */
|
|
if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
|
|
goto error;
|
|
skb_pull(skb, BR2684_PAD_LEN);
|
|
skb->protocol = eth_type_trans(skb, net_dev);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_ATM_BR2684_IPFILTER
|
|
if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb)))
|
|
goto dropped;
|
|
#endif /* CONFIG_ATM_BR2684_IPFILTER */
|
|
skb->dev = net_dev;
|
|
ATM_SKB(skb)->vcc = atmvcc; /* needed ? */
|
|
pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol));
|
|
skb_debug(skb);
|
|
/* sigh, interface is down? */
|
|
if (unlikely(!(net_dev->flags & IFF_UP)))
|
|
goto dropped;
|
|
net_dev->stats.rx_packets++;
|
|
net_dev->stats.rx_bytes += skb->len;
|
|
memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
|
|
netif_rx(skb);
|
|
return;
|
|
|
|
dropped:
|
|
net_dev->stats.rx_dropped++;
|
|
goto free_skb;
|
|
error:
|
|
net_dev->stats.rx_errors++;
|
|
free_skb:
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
/*
|
|
* Assign a vcc to a dev
|
|
* Note: we do not have explicit unassign, but look at _push()
|
|
*/
|
|
static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
|
|
{
|
|
struct br2684_vcc *brvcc;
|
|
struct br2684_dev *brdev;
|
|
struct net_device *net_dev;
|
|
struct atm_backend_br2684 be;
|
|
int err;
|
|
|
|
if (copy_from_user(&be, arg, sizeof be))
|
|
return -EFAULT;
|
|
brvcc = kzalloc(sizeof(struct br2684_vcc), GFP_KERNEL);
|
|
if (!brvcc)
|
|
return -ENOMEM;
|
|
/*
|
|
* Allow two packets in the ATM queue. One actually being sent, and one
|
|
* for the ATM 'TX done' handler to send. It shouldn't take long to get
|
|
* the next one from the netdev queue, when we need it. More than that
|
|
* would be bufferbloat.
|
|
*/
|
|
atomic_set(&brvcc->qspace, 2);
|
|
write_lock_irq(&devs_lock);
|
|
net_dev = br2684_find_dev(&be.ifspec);
|
|
if (net_dev == NULL) {
|
|
pr_err("tried to attach to non-existent device\n");
|
|
err = -ENXIO;
|
|
goto error;
|
|
}
|
|
brdev = BRPRIV(net_dev);
|
|
if (atmvcc->push == NULL) {
|
|
err = -EBADFD;
|
|
goto error;
|
|
}
|
|
if (!list_empty(&brdev->brvccs)) {
|
|
/* Only 1 VCC/dev right now */
|
|
err = -EEXIST;
|
|
goto error;
|
|
}
|
|
if (be.fcs_in != BR2684_FCSIN_NO ||
|
|
be.fcs_out != BR2684_FCSOUT_NO ||
|
|
be.fcs_auto || be.has_vpiid || be.send_padding ||
|
|
(be.encaps != BR2684_ENCAPS_VC &&
|
|
be.encaps != BR2684_ENCAPS_LLC) ||
|
|
be.min_size != 0) {
|
|
err = -EINVAL;
|
|
goto error;
|
|
}
|
|
pr_debug("vcc=%p, encaps=%d, brvcc=%p\n", atmvcc, be.encaps, brvcc);
|
|
if (list_empty(&brdev->brvccs) && !brdev->mac_was_set) {
|
|
unsigned char *esi = atmvcc->dev->esi;
|
|
if (esi[0] | esi[1] | esi[2] | esi[3] | esi[4] | esi[5])
|
|
memcpy(net_dev->dev_addr, esi, net_dev->addr_len);
|
|
else
|
|
net_dev->dev_addr[2] = 1;
|
|
}
|
|
list_add(&brvcc->brvccs, &brdev->brvccs);
|
|
write_unlock_irq(&devs_lock);
|
|
brvcc->device = net_dev;
|
|
brvcc->atmvcc = atmvcc;
|
|
atmvcc->user_back = brvcc;
|
|
brvcc->encaps = (enum br2684_encaps)be.encaps;
|
|
brvcc->old_push = atmvcc->push;
|
|
brvcc->old_pop = atmvcc->pop;
|
|
brvcc->old_release_cb = atmvcc->release_cb;
|
|
brvcc->old_owner = atmvcc->owner;
|
|
barrier();
|
|
atmvcc->push = br2684_push;
|
|
atmvcc->pop = br2684_pop;
|
|
atmvcc->release_cb = br2684_release_cb;
|
|
atmvcc->owner = THIS_MODULE;
|
|
|
|
/* initialize netdev carrier state */
|
|
if (atmvcc->dev->signal == ATM_PHY_SIG_LOST)
|
|
netif_carrier_off(net_dev);
|
|
else
|
|
netif_carrier_on(net_dev);
|
|
|
|
__module_get(THIS_MODULE);
|
|
|
|
/* re-process everything received between connection setup and
|
|
backend setup */
|
|
vcc_process_recv_queue(atmvcc);
|
|
return 0;
|
|
|
|
error:
|
|
write_unlock_irq(&devs_lock);
|
|
kfree(brvcc);
|
|
return err;
|
|
}
|
|
|
|
static const struct net_device_ops br2684_netdev_ops = {
|
|
.ndo_start_xmit = br2684_start_xmit,
|
|
.ndo_set_mac_address = br2684_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static const struct net_device_ops br2684_netdev_ops_routed = {
|
|
.ndo_start_xmit = br2684_start_xmit,
|
|
.ndo_set_mac_address = br2684_mac_addr,
|
|
};
|
|
|
|
static void br2684_setup(struct net_device *netdev)
|
|
{
|
|
struct br2684_dev *brdev = BRPRIV(netdev);
|
|
|
|
ether_setup(netdev);
|
|
netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
|
|
brdev->net_dev = netdev;
|
|
|
|
netdev->netdev_ops = &br2684_netdev_ops;
|
|
|
|
INIT_LIST_HEAD(&brdev->brvccs);
|
|
}
|
|
|
|
static void br2684_setup_routed(struct net_device *netdev)
|
|
{
|
|
struct br2684_dev *brdev = BRPRIV(netdev);
|
|
|
|
brdev->net_dev = netdev;
|
|
netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
|
|
netdev->netdev_ops = &br2684_netdev_ops_routed;
|
|
netdev->addr_len = 0;
|
|
netdev->mtu = ETH_DATA_LEN;
|
|
netdev->min_mtu = 0;
|
|
netdev->max_mtu = ETH_MAX_MTU;
|
|
netdev->type = ARPHRD_PPP;
|
|
netdev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
|
|
netdev->tx_queue_len = 100;
|
|
INIT_LIST_HEAD(&brdev->brvccs);
|
|
}
|
|
|
|
static int br2684_create(void __user *arg)
|
|
{
|
|
int err;
|
|
struct net_device *netdev;
|
|
struct br2684_dev *brdev;
|
|
struct atm_newif_br2684 ni;
|
|
enum br2684_payload payload;
|
|
|
|
pr_debug("\n");
|
|
|
|
if (copy_from_user(&ni, arg, sizeof ni))
|
|
return -EFAULT;
|
|
|
|
if (ni.media & BR2684_FLAG_ROUTED)
|
|
payload = p_routed;
|
|
else
|
|
payload = p_bridged;
|
|
ni.media &= 0xffff; /* strip flags */
|
|
|
|
if (ni.media != BR2684_MEDIA_ETHERNET || ni.mtu != 1500)
|
|
return -EINVAL;
|
|
|
|
netdev = alloc_netdev(sizeof(struct br2684_dev),
|
|
ni.ifname[0] ? ni.ifname : "nas%d",
|
|
NET_NAME_UNKNOWN,
|
|
(payload == p_routed) ? br2684_setup_routed : br2684_setup);
|
|
if (!netdev)
|
|
return -ENOMEM;
|
|
|
|
brdev = BRPRIV(netdev);
|
|
|
|
pr_debug("registered netdev %s\n", netdev->name);
|
|
/* open, stop, do_ioctl ? */
|
|
err = register_netdev(netdev);
|
|
if (err < 0) {
|
|
pr_err("register_netdev failed\n");
|
|
free_netdev(netdev);
|
|
return err;
|
|
}
|
|
|
|
write_lock_irq(&devs_lock);
|
|
|
|
brdev->payload = payload;
|
|
|
|
if (list_empty(&br2684_devs)) {
|
|
/* 1st br2684 device */
|
|
brdev->number = 1;
|
|
} else
|
|
brdev->number = BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
|
|
|
|
list_add_tail(&brdev->br2684_devs, &br2684_devs);
|
|
write_unlock_irq(&devs_lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This handles ioctls actually performed on our vcc - we must return
|
|
* -ENOIOCTLCMD for any unrecognized ioctl
|
|
*/
|
|
static int br2684_ioctl(struct socket *sock, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct atm_vcc *atmvcc = ATM_SD(sock);
|
|
void __user *argp = (void __user *)arg;
|
|
atm_backend_t b;
|
|
|
|
int err;
|
|
switch (cmd) {
|
|
case ATM_SETBACKEND:
|
|
case ATM_NEWBACKENDIF:
|
|
err = get_user(b, (atm_backend_t __user *) argp);
|
|
if (err)
|
|
return -EFAULT;
|
|
if (b != ATM_BACKEND_BR2684)
|
|
return -ENOIOCTLCMD;
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
if (cmd == ATM_SETBACKEND) {
|
|
if (sock->state != SS_CONNECTED)
|
|
return -EINVAL;
|
|
return br2684_regvcc(atmvcc, argp);
|
|
} else {
|
|
return br2684_create(argp);
|
|
}
|
|
#ifdef CONFIG_ATM_BR2684_IPFILTER
|
|
case BR2684_SETFILT:
|
|
if (atmvcc->push != br2684_push)
|
|
return -ENOIOCTLCMD;
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
err = br2684_setfilt(atmvcc, argp);
|
|
|
|
return err;
|
|
#endif /* CONFIG_ATM_BR2684_IPFILTER */
|
|
}
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static struct atm_ioctl br2684_ioctl_ops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = br2684_ioctl,
|
|
};
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
static void *br2684_seq_start(struct seq_file *seq, loff_t * pos)
|
|
__acquires(devs_lock)
|
|
{
|
|
read_lock(&devs_lock);
|
|
return seq_list_start(&br2684_devs, *pos);
|
|
}
|
|
|
|
static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t * pos)
|
|
{
|
|
return seq_list_next(v, &br2684_devs, pos);
|
|
}
|
|
|
|
static void br2684_seq_stop(struct seq_file *seq, void *v)
|
|
__releases(devs_lock)
|
|
{
|
|
read_unlock(&devs_lock);
|
|
}
|
|
|
|
static int br2684_seq_show(struct seq_file *seq, void *v)
|
|
{
|
|
const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
|
|
br2684_devs);
|
|
const struct net_device *net_dev = brdev->net_dev;
|
|
const struct br2684_vcc *brvcc;
|
|
|
|
seq_printf(seq, "dev %.16s: num=%d, mac=%pM (%s)\n",
|
|
net_dev->name,
|
|
brdev->number,
|
|
net_dev->dev_addr,
|
|
brdev->mac_was_set ? "set" : "auto");
|
|
|
|
list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
|
|
seq_printf(seq, " vcc %d.%d.%d: encaps=%s payload=%s"
|
|
", failed copies %u/%u"
|
|
"\n", brvcc->atmvcc->dev->number,
|
|
brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
|
|
(brvcc->encaps == e_llc) ? "LLC" : "VC",
|
|
(brdev->payload == p_bridged) ? "bridged" : "routed",
|
|
brvcc->copies_failed, brvcc->copies_needed);
|
|
#ifdef CONFIG_ATM_BR2684_IPFILTER
|
|
if (brvcc->filter.netmask != 0)
|
|
seq_printf(seq, " filter=%pI4/%pI4\n",
|
|
&brvcc->filter.prefix,
|
|
&brvcc->filter.netmask);
|
|
#endif /* CONFIG_ATM_BR2684_IPFILTER */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct seq_operations br2684_seq_ops = {
|
|
.start = br2684_seq_start,
|
|
.next = br2684_seq_next,
|
|
.stop = br2684_seq_stop,
|
|
.show = br2684_seq_show,
|
|
};
|
|
|
|
extern struct proc_dir_entry *atm_proc_root; /* from proc.c */
|
|
#endif /* CONFIG_PROC_FS */
|
|
|
|
static int __init br2684_init(void)
|
|
{
|
|
#ifdef CONFIG_PROC_FS
|
|
struct proc_dir_entry *p;
|
|
p = proc_create_seq("br2684", 0, atm_proc_root, &br2684_seq_ops);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
#endif
|
|
register_atm_ioctl(&br2684_ioctl_ops);
|
|
register_atmdevice_notifier(&atm_dev_notifier);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit br2684_exit(void)
|
|
{
|
|
struct net_device *net_dev;
|
|
struct br2684_dev *brdev;
|
|
struct br2684_vcc *brvcc;
|
|
deregister_atm_ioctl(&br2684_ioctl_ops);
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
remove_proc_entry("br2684", atm_proc_root);
|
|
#endif
|
|
|
|
|
|
unregister_atmdevice_notifier(&atm_dev_notifier);
|
|
|
|
while (!list_empty(&br2684_devs)) {
|
|
net_dev = list_entry_brdev(br2684_devs.next);
|
|
brdev = BRPRIV(net_dev);
|
|
while (!list_empty(&brdev->brvccs)) {
|
|
brvcc = list_entry_brvcc(brdev->brvccs.next);
|
|
br2684_close_vcc(brvcc);
|
|
}
|
|
|
|
list_del(&brdev->br2684_devs);
|
|
unregister_netdev(net_dev);
|
|
free_netdev(net_dev);
|
|
}
|
|
}
|
|
|
|
module_init(br2684_init);
|
|
module_exit(br2684_exit);
|
|
|
|
MODULE_AUTHOR("Marcell GAL");
|
|
MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
|
|
MODULE_LICENSE("GPL");
|