ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
343 lines
8.9 KiB
C
343 lines
8.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* max8907.c - mfd driver for MAX8907
|
|
*
|
|
* Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com>
|
|
* Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/max8907.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
static const struct mfd_cell max8907_cells[] = {
|
|
{ .name = "max8907-regulator", },
|
|
{ .name = "max8907-rtc", },
|
|
};
|
|
|
|
static bool max8907_gen_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX8907_REG_ON_OFF_IRQ1:
|
|
case MAX8907_REG_ON_OFF_STAT:
|
|
case MAX8907_REG_ON_OFF_IRQ2:
|
|
case MAX8907_REG_CHG_IRQ1:
|
|
case MAX8907_REG_CHG_IRQ2:
|
|
case MAX8907_REG_CHG_STAT:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool max8907_gen_is_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX8907_REG_ON_OFF_IRQ1:
|
|
case MAX8907_REG_ON_OFF_IRQ2:
|
|
case MAX8907_REG_CHG_IRQ1:
|
|
case MAX8907_REG_CHG_IRQ2:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool max8907_gen_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return !max8907_gen_is_volatile_reg(dev, reg);
|
|
}
|
|
|
|
static const struct regmap_config max8907_regmap_gen_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.volatile_reg = max8907_gen_is_volatile_reg,
|
|
.precious_reg = max8907_gen_is_precious_reg,
|
|
.writeable_reg = max8907_gen_is_writeable_reg,
|
|
.max_register = MAX8907_REG_LDO20VOUT,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static bool max8907_rtc_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
if (reg <= MAX8907_REG_RTC_YEAR2)
|
|
return true;
|
|
|
|
switch (reg) {
|
|
case MAX8907_REG_RTC_STATUS:
|
|
case MAX8907_REG_RTC_IRQ:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool max8907_rtc_is_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX8907_REG_RTC_IRQ:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool max8907_rtc_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX8907_REG_RTC_STATUS:
|
|
case MAX8907_REG_RTC_IRQ:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config max8907_regmap_rtc_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.volatile_reg = max8907_rtc_is_volatile_reg,
|
|
.precious_reg = max8907_rtc_is_precious_reg,
|
|
.writeable_reg = max8907_rtc_is_writeable_reg,
|
|
.max_register = MAX8907_REG_MPL_CNTL,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct regmap_irq max8907_chg_irqs[] = {
|
|
{ .reg_offset = 0, .mask = 1 << 0, },
|
|
{ .reg_offset = 0, .mask = 1 << 1, },
|
|
{ .reg_offset = 0, .mask = 1 << 2, },
|
|
{ .reg_offset = 1, .mask = 1 << 0, },
|
|
{ .reg_offset = 1, .mask = 1 << 1, },
|
|
{ .reg_offset = 1, .mask = 1 << 2, },
|
|
{ .reg_offset = 1, .mask = 1 << 3, },
|
|
{ .reg_offset = 1, .mask = 1 << 4, },
|
|
{ .reg_offset = 1, .mask = 1 << 5, },
|
|
{ .reg_offset = 1, .mask = 1 << 6, },
|
|
{ .reg_offset = 1, .mask = 1 << 7, },
|
|
};
|
|
|
|
static const struct regmap_irq_chip max8907_chg_irq_chip = {
|
|
.name = "max8907 chg",
|
|
.status_base = MAX8907_REG_CHG_IRQ1,
|
|
.mask_base = MAX8907_REG_CHG_IRQ1_MASK,
|
|
.wake_base = MAX8907_REG_CHG_IRQ1_MASK,
|
|
.irq_reg_stride = MAX8907_REG_CHG_IRQ2 - MAX8907_REG_CHG_IRQ1,
|
|
.num_regs = 2,
|
|
.irqs = max8907_chg_irqs,
|
|
.num_irqs = ARRAY_SIZE(max8907_chg_irqs),
|
|
};
|
|
|
|
static const struct regmap_irq max8907_on_off_irqs[] = {
|
|
{ .reg_offset = 0, .mask = 1 << 0, },
|
|
{ .reg_offset = 0, .mask = 1 << 1, },
|
|
{ .reg_offset = 0, .mask = 1 << 2, },
|
|
{ .reg_offset = 0, .mask = 1 << 3, },
|
|
{ .reg_offset = 0, .mask = 1 << 4, },
|
|
{ .reg_offset = 0, .mask = 1 << 5, },
|
|
{ .reg_offset = 0, .mask = 1 << 6, },
|
|
{ .reg_offset = 0, .mask = 1 << 7, },
|
|
{ .reg_offset = 1, .mask = 1 << 0, },
|
|
{ .reg_offset = 1, .mask = 1 << 1, },
|
|
};
|
|
|
|
static const struct regmap_irq_chip max8907_on_off_irq_chip = {
|
|
.name = "max8907 on_off",
|
|
.status_base = MAX8907_REG_ON_OFF_IRQ1,
|
|
.mask_base = MAX8907_REG_ON_OFF_IRQ1_MASK,
|
|
.irq_reg_stride = MAX8907_REG_ON_OFF_IRQ2 - MAX8907_REG_ON_OFF_IRQ1,
|
|
.num_regs = 2,
|
|
.irqs = max8907_on_off_irqs,
|
|
.num_irqs = ARRAY_SIZE(max8907_on_off_irqs),
|
|
};
|
|
|
|
static const struct regmap_irq max8907_rtc_irqs[] = {
|
|
{ .reg_offset = 0, .mask = 1 << 2, },
|
|
{ .reg_offset = 0, .mask = 1 << 3, },
|
|
};
|
|
|
|
static const struct regmap_irq_chip max8907_rtc_irq_chip = {
|
|
.name = "max8907 rtc",
|
|
.status_base = MAX8907_REG_RTC_IRQ,
|
|
.mask_base = MAX8907_REG_RTC_IRQ_MASK,
|
|
.num_regs = 1,
|
|
.irqs = max8907_rtc_irqs,
|
|
.num_irqs = ARRAY_SIZE(max8907_rtc_irqs),
|
|
};
|
|
|
|
static struct max8907 *max8907_pm_off;
|
|
static void max8907_power_off(void)
|
|
{
|
|
regmap_update_bits(max8907_pm_off->regmap_gen, MAX8907_REG_RESET_CNFG,
|
|
MAX8907_MASK_POWER_OFF, MAX8907_MASK_POWER_OFF);
|
|
}
|
|
|
|
static int max8907_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct max8907 *max8907;
|
|
int ret;
|
|
struct max8907_platform_data *pdata = dev_get_platdata(&i2c->dev);
|
|
bool pm_off = false;
|
|
|
|
if (pdata)
|
|
pm_off = pdata->pm_off;
|
|
else if (i2c->dev.of_node)
|
|
pm_off = of_property_read_bool(i2c->dev.of_node,
|
|
"maxim,system-power-controller");
|
|
|
|
max8907 = devm_kzalloc(&i2c->dev, sizeof(struct max8907), GFP_KERNEL);
|
|
if (!max8907) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc_drvdata;
|
|
}
|
|
|
|
max8907->dev = &i2c->dev;
|
|
dev_set_drvdata(max8907->dev, max8907);
|
|
|
|
max8907->i2c_gen = i2c;
|
|
i2c_set_clientdata(i2c, max8907);
|
|
max8907->regmap_gen = devm_regmap_init_i2c(i2c,
|
|
&max8907_regmap_gen_config);
|
|
if (IS_ERR(max8907->regmap_gen)) {
|
|
ret = PTR_ERR(max8907->regmap_gen);
|
|
dev_err(&i2c->dev, "gen regmap init failed: %d\n", ret);
|
|
goto err_regmap_gen;
|
|
}
|
|
|
|
max8907->i2c_rtc = i2c_new_dummy_device(i2c->adapter, MAX8907_RTC_I2C_ADDR);
|
|
if (IS_ERR(max8907->i2c_rtc)) {
|
|
ret = PTR_ERR(max8907->i2c_rtc);
|
|
goto err_dummy_rtc;
|
|
}
|
|
i2c_set_clientdata(max8907->i2c_rtc, max8907);
|
|
max8907->regmap_rtc = devm_regmap_init_i2c(max8907->i2c_rtc,
|
|
&max8907_regmap_rtc_config);
|
|
if (IS_ERR(max8907->regmap_rtc)) {
|
|
ret = PTR_ERR(max8907->regmap_rtc);
|
|
dev_err(&i2c->dev, "rtc regmap init failed: %d\n", ret);
|
|
goto err_regmap_rtc;
|
|
}
|
|
|
|
ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED,
|
|
-1, &max8907_chg_irq_chip,
|
|
&max8907->irqc_chg);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "failed to add chg irq chip: %d\n", ret);
|
|
goto err_irqc_chg;
|
|
}
|
|
ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED, -1,
|
|
&max8907_on_off_irq_chip,
|
|
&max8907->irqc_on_off);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "failed to add on off irq chip: %d\n", ret);
|
|
goto err_irqc_on_off;
|
|
}
|
|
ret = regmap_add_irq_chip(max8907->regmap_rtc, max8907->i2c_gen->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED, -1,
|
|
&max8907_rtc_irq_chip,
|
|
&max8907->irqc_rtc);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "failed to add rtc irq chip: %d\n", ret);
|
|
goto err_irqc_rtc;
|
|
}
|
|
|
|
ret = mfd_add_devices(max8907->dev, -1, max8907_cells,
|
|
ARRAY_SIZE(max8907_cells), NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "failed to add MFD devices %d\n", ret);
|
|
goto err_add_devices;
|
|
}
|
|
|
|
if (pm_off && !pm_power_off) {
|
|
max8907_pm_off = max8907;
|
|
pm_power_off = max8907_power_off;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_add_devices:
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc);
|
|
err_irqc_rtc:
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off);
|
|
err_irqc_on_off:
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg);
|
|
err_irqc_chg:
|
|
err_regmap_rtc:
|
|
i2c_unregister_device(max8907->i2c_rtc);
|
|
err_dummy_rtc:
|
|
err_regmap_gen:
|
|
err_alloc_drvdata:
|
|
return ret;
|
|
}
|
|
|
|
static void max8907_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
struct max8907 *max8907 = i2c_get_clientdata(i2c);
|
|
|
|
mfd_remove_devices(max8907->dev);
|
|
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc);
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off);
|
|
regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg);
|
|
|
|
i2c_unregister_device(max8907->i2c_rtc);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id max8907_of_match[] = {
|
|
{ .compatible = "maxim,max8907" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max8907_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id max8907_i2c_id[] = {
|
|
{"max8907", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max8907_i2c_id);
|
|
|
|
static struct i2c_driver max8907_i2c_driver = {
|
|
.driver = {
|
|
.name = "max8907",
|
|
.of_match_table = of_match_ptr(max8907_of_match),
|
|
},
|
|
.probe = max8907_i2c_probe,
|
|
.remove = max8907_i2c_remove,
|
|
.id_table = max8907_i2c_id,
|
|
};
|
|
|
|
static int __init max8907_i2c_init(void)
|
|
{
|
|
int ret = -ENODEV;
|
|
|
|
ret = i2c_add_driver(&max8907_i2c_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register I2C driver: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(max8907_i2c_init);
|
|
|
|
static void __exit max8907_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&max8907_i2c_driver);
|
|
}
|
|
module_exit(max8907_i2c_exit);
|
|
|
|
MODULE_DESCRIPTION("MAX8907 multi-function core driver");
|
|
MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>");
|
|
MODULE_LICENSE("GPL v2");
|