ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
261 lines
5.9 KiB
C
261 lines
5.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* I2C driver for Maxim MAX8925
|
|
*
|
|
* Copyright (C) 2009 Marvell International Ltd.
|
|
* Haojian Zhuang <haojian.zhuang@marvell.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/max8925.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define RTC_I2C_ADDR 0x68
|
|
#define ADC_I2C_ADDR 0x47
|
|
|
|
static inline int max8925_read_device(struct i2c_client *i2c,
|
|
int reg, int bytes, void *dest)
|
|
{
|
|
int ret;
|
|
|
|
if (bytes > 1)
|
|
ret = i2c_smbus_read_i2c_block_data(i2c, reg, bytes, dest);
|
|
else {
|
|
ret = i2c_smbus_read_byte_data(i2c, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
*(unsigned char *)dest = (unsigned char)ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static inline int max8925_write_device(struct i2c_client *i2c,
|
|
int reg, int bytes, void *src)
|
|
{
|
|
unsigned char buf[9];
|
|
int ret;
|
|
|
|
buf[0] = (unsigned char)reg;
|
|
memcpy(&buf[1], src, bytes);
|
|
|
|
ret = i2c_master_send(i2c, buf, bytes + 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
int max8925_reg_read(struct i2c_client *i2c, int reg)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(i2c);
|
|
unsigned char data = 0;
|
|
int ret;
|
|
|
|
mutex_lock(&chip->io_lock);
|
|
ret = max8925_read_device(i2c, reg, 1, &data);
|
|
mutex_unlock(&chip->io_lock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return (int)data;
|
|
}
|
|
EXPORT_SYMBOL(max8925_reg_read);
|
|
|
|
int max8925_reg_write(struct i2c_client *i2c, int reg,
|
|
unsigned char data)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(i2c);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->io_lock);
|
|
ret = max8925_write_device(i2c, reg, 1, &data);
|
|
mutex_unlock(&chip->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(max8925_reg_write);
|
|
|
|
int max8925_bulk_read(struct i2c_client *i2c, int reg,
|
|
int count, unsigned char *buf)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(i2c);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->io_lock);
|
|
ret = max8925_read_device(i2c, reg, count, buf);
|
|
mutex_unlock(&chip->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(max8925_bulk_read);
|
|
|
|
int max8925_bulk_write(struct i2c_client *i2c, int reg,
|
|
int count, unsigned char *buf)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(i2c);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->io_lock);
|
|
ret = max8925_write_device(i2c, reg, count, buf);
|
|
mutex_unlock(&chip->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(max8925_bulk_write);
|
|
|
|
int max8925_set_bits(struct i2c_client *i2c, int reg,
|
|
unsigned char mask, unsigned char data)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(i2c);
|
|
unsigned char value;
|
|
int ret;
|
|
|
|
mutex_lock(&chip->io_lock);
|
|
ret = max8925_read_device(i2c, reg, 1, &value);
|
|
if (ret < 0)
|
|
goto out;
|
|
value &= ~mask;
|
|
value |= data;
|
|
ret = max8925_write_device(i2c, reg, 1, &value);
|
|
out:
|
|
mutex_unlock(&chip->io_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(max8925_set_bits);
|
|
|
|
|
|
static const struct i2c_device_id max8925_id_table[] = {
|
|
{ "max8925", 0 },
|
|
{ },
|
|
};
|
|
|
|
static int max8925_dt_init(struct device_node *np, struct device *dev,
|
|
struct max8925_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
|
|
ret = of_property_read_u32(np, "maxim,tsc-irq", &pdata->tsc_irq);
|
|
if (ret) {
|
|
dev_err(dev, "Not found maxim,tsc-irq property\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max8925_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct max8925_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct max8925_chip *chip;
|
|
struct device_node *node = client->dev.of_node;
|
|
|
|
if (node && !pdata) {
|
|
/* parse DT to get platform data */
|
|
pdata = devm_kzalloc(&client->dev,
|
|
sizeof(struct max8925_platform_data),
|
|
GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
if (max8925_dt_init(node, &client->dev, pdata))
|
|
return -EINVAL;
|
|
} else if (!pdata) {
|
|
pr_info("%s: platform data is missing\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip = devm_kzalloc(&client->dev,
|
|
sizeof(struct max8925_chip), GFP_KERNEL);
|
|
if (chip == NULL)
|
|
return -ENOMEM;
|
|
chip->i2c = client;
|
|
chip->dev = &client->dev;
|
|
i2c_set_clientdata(client, chip);
|
|
dev_set_drvdata(chip->dev, chip);
|
|
mutex_init(&chip->io_lock);
|
|
|
|
chip->rtc = i2c_new_dummy_device(chip->i2c->adapter, RTC_I2C_ADDR);
|
|
if (IS_ERR(chip->rtc)) {
|
|
dev_err(chip->dev, "Failed to allocate I2C device for RTC\n");
|
|
return PTR_ERR(chip->rtc);
|
|
}
|
|
i2c_set_clientdata(chip->rtc, chip);
|
|
|
|
chip->adc = i2c_new_dummy_device(chip->i2c->adapter, ADC_I2C_ADDR);
|
|
if (IS_ERR(chip->adc)) {
|
|
dev_err(chip->dev, "Failed to allocate I2C device for ADC\n");
|
|
i2c_unregister_device(chip->rtc);
|
|
return PTR_ERR(chip->adc);
|
|
}
|
|
i2c_set_clientdata(chip->adc, chip);
|
|
|
|
device_init_wakeup(&client->dev, 1);
|
|
|
|
max8925_device_init(chip, pdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max8925_remove(struct i2c_client *client)
|
|
{
|
|
struct max8925_chip *chip = i2c_get_clientdata(client);
|
|
|
|
max8925_device_exit(chip);
|
|
i2c_unregister_device(chip->adc);
|
|
i2c_unregister_device(chip->rtc);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int max8925_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max8925_chip *chip = i2c_get_clientdata(client);
|
|
|
|
if (device_may_wakeup(dev) && chip->wakeup_flag)
|
|
enable_irq_wake(chip->core_irq);
|
|
return 0;
|
|
}
|
|
|
|
static int max8925_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max8925_chip *chip = i2c_get_clientdata(client);
|
|
|
|
if (device_may_wakeup(dev) && chip->wakeup_flag)
|
|
disable_irq_wake(chip->core_irq);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(max8925_pm_ops, max8925_suspend, max8925_resume);
|
|
|
|
static const struct of_device_id max8925_dt_ids[] = {
|
|
{ .compatible = "maxim,max8925", },
|
|
{},
|
|
};
|
|
|
|
static struct i2c_driver max8925_driver = {
|
|
.driver = {
|
|
.name = "max8925",
|
|
.pm = &max8925_pm_ops,
|
|
.of_match_table = max8925_dt_ids,
|
|
},
|
|
.probe = max8925_probe,
|
|
.remove = max8925_remove,
|
|
.id_table = max8925_id_table,
|
|
};
|
|
|
|
static int __init max8925_i2c_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_add_driver(&max8925_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register MAX8925 I2C driver: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(max8925_i2c_init);
|