Eric Anholt 9d44abbbb8 drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything.  However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).

As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection.  Fixes HDMI display on the pi3.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06 11:58:26 -07:00
..
2016-09-19 11:22:08 +02:00
2016-09-28 12:08:49 +10:00
2016-09-19 11:22:08 +02:00
2016-09-28 12:08:49 +10:00
2016-09-28 12:08:49 +10:00
2016-09-28 12:08:49 +10:00
2016-09-19 11:22:08 +02:00
2016-09-28 12:08:49 +10:00
2016-09-28 12:08:49 +10:00
2016-09-28 11:23:15 +10:00
2016-09-30 13:00:36 +10:00
2016-09-28 12:08:49 +10:00
2016-09-19 15:04:15 +02:00
2016-08-16 18:49:47 +02:00
2016-09-22 00:04:02 -07:00
2016-09-21 13:33:50 +02:00
2016-09-28 12:08:49 +10:00
2016-09-19 11:21:42 +02:00
2016-09-22 00:01:56 -07:00
2016-09-19 11:22:08 +02:00
2016-09-06 13:56:41 -04:00
2016-09-19 11:21:42 +02:00
2016-09-19 13:57:38 +02:00
2016-09-19 13:57:38 +02:00
2016-09-19 13:57:38 +02:00
2016-09-19 13:57:38 +02:00
2016-09-22 00:04:02 -07:00