Ken O'Brien 5bcecf3253 Bluetooth: btusb: Add support for Belkin F8065bf ...

Add generic rule on encountering Belkin bluetooth usb device F8065bf.

Relevant section from /sys/kernel/debug/usb/devices:

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=050d ProdID=065a Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=0002723E2D29
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms

Signed-off-by: Ken O'Brien <kernel@kenobrien.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

2013-09-23 17:44:25 -03:00

..

ath3k.c

Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.

2013-09-16 14:36:55 -03:00

bcm203x.c

Bluetooth: Use devm_kzalloc in bcm203x.c file.

2012-08-06 15:03:00 -03:00

bfusb.c

Bluetooth: Use devm_kzalloc in bfusb.c file

2012-08-06 15:03:00 -03:00

bluecard_cs.c

drivers/bluetooth: use module_pcmcia_driver() in pcmcia drivers

2013-03-15 12:26:04 -07:00

bpa10x.c

Bluetooth: Use devm_kzalloc in bpa10x.c file

2012-08-06 15:03:01 -03:00

bt3c_cs.c

drivers/bluetooth: use module_pcmcia_driver() in pcmcia drivers

2013-03-15 12:26:04 -07:00

btmrvl_debugfs.c

Bluetooth: replace strict_strtol() with kstrtol()

2013-07-25 14:15:25 +01:00

btmrvl_drv.h

Bluetooth: btmrvl: Do not send vendor events to bluetooth stack

2012-06-19 00:19:11 -03:00

btmrvl_main.c

Bluetooth: btmrvl: fix thread stopping race

2013-06-13 13:05:40 -04:00

btmrvl_sdio.c

Bluetooth: use DIV_ROUND_UP in suitable places in btmrvl_sdio

2013-08-21 16:46:50 +02:00

btmrvl_sdio.h

Bluetooth: btmrvl: support Marvell Bluetooth device SD8787

2011-04-13 12:20:05 -03:00

btsdio.c

Bluetooth: Use devm_kzalloc in btsdio.c file

2012-08-06 15:03:01 -03:00

btuart_cs.c

drivers/bluetooth: use module_pcmcia_driver() in pcmcia drivers

2013-03-15 12:26:04 -07:00

btusb.c

Bluetooth: btusb: Add support for Belkin F8065bf

2013-09-23 17:44:25 -03:00

btwilink.c

Bluetooth: Use module_platform_driver() in btwilink.c file

2012-09-08 16:53:47 -03:00

dtl1_cs.c

drivers/bluetooth: use module_pcmcia_driver() in pcmcia drivers

2013-03-15 12:26:04 -07:00

hci_ath.c

tty: move the termios object into the tty

2012-07-16 13:00:41 -07:00

hci_bcsp.c

Bluetooth: Remove 'register' usage from the subsystem

2012-06-05 06:34:07 +03:00

hci_h4.c

Bluetooth: Fix H4 crash from incoming UART packets

2013-04-04 12:35:58 +03:00

hci_h5.c

Bluetooth: Introduce a flags variable to Three-wire UART state

2012-07-17 14:49:24 -03:00

hci_ldisc.c

Bluetooth: Remove trivial white space

2013-04-04 12:36:02 +03:00

hci_ll.c

Bluetooth: hci_ll.c: removes unnecessary semicolon

2012-09-18 22:26:33 -03:00

hci_uart.h

Bluetooth: Add delayed init sequence support for UART controllers

2012-07-17 14:48:29 -03:00

hci_vhci.c

Bluetooth: hci_vhci.c: removes unnecessary semicolon

2012-09-18 22:26:43 -03:00

Kconfig

Bluetooth: btmrvl: support Marvell Bluetooth device SD8897

2013-06-12 10:20:54 -04:00

Makefile

Bluetooth: Initial skeleton for Three-wire UART (H5) support

2012-07-17 14:33:20 -03:00