7f464532b0
Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org>
76 lines
1.7 KiB
YAML
76 lines
1.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Milbeaut SoCs Clock Controller Binding
|
|
|
|
maintainers:
|
|
- Taichi Sugaya <sugaya.taichi@socionext.com>
|
|
|
|
description: |
|
|
Milbeaut SoCs Clock controller is an integrated clock controller, which
|
|
generates and supplies to all modules.
|
|
|
|
This binding uses common clock bindings
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- items:
|
|
- enum:
|
|
- socionext,milbeaut-m10v-ccu
|
|
clocks:
|
|
maxItems: 1
|
|
description: external clock
|
|
|
|
'#clock-cells':
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- '#clock-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
# Clock controller node:
|
|
- |
|
|
m10v-clk-ctrl@1d021000 {
|
|
compatible = "socionext,milbeaut-m10v-clk-ccu";
|
|
reg = <0x1d021000 0x4000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&clki40mhz>;
|
|
};
|
|
|
|
# Required an external clock for Clock controller node:
|
|
- |
|
|
clocks {
|
|
clki40mhz: clki40mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <40000000>;
|
|
};
|
|
/* other clocks */
|
|
};
|
|
|
|
# The clock consumer shall specify the desired clock-output of the clock
|
|
# controller as below by specifying output-id in its "clk" phandle cell.
|
|
# 2: uart
|
|
# 4: 32-bit timer
|
|
# 7: UHS-I/II
|
|
- |
|
|
serial@1e700010 {
|
|
compatible = "socionext,milbeaut-usio-uart";
|
|
reg = <0x1e700010 0x10>;
|
|
interrupts = <0 141 0x4>, <0 149 0x4>;
|
|
interrupt-names = "rx", "tx";
|
|
clocks = <&clk 2>;
|
|
};
|
|
|
|
...
|