9f68e3655a
uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV P0hdYOYJf6LUda0utuQX =oFrI -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
828 lines
20 KiB
C
828 lines
20 KiB
C
/*
|
|
* linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* All rights reserved.
|
|
*
|
|
* 2009-02-16 adapted from original version for PXA168/910
|
|
* Jun Nie <njun@marvell.com>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/uaccess.h>
|
|
#include <video/pxa168fb.h>
|
|
|
|
#include "pxa168fb.h"
|
|
|
|
#define DEFAULT_REFRESH 60 /* Hz */
|
|
|
|
static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
|
|
{
|
|
/*
|
|
* Pseudocolor mode?
|
|
*/
|
|
if (var->bits_per_pixel == 8)
|
|
return PIX_FMT_PSEUDOCOLOR;
|
|
|
|
/*
|
|
* Check for 565/1555.
|
|
*/
|
|
if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
|
|
var->green.length <= 6 && var->blue.length <= 5) {
|
|
if (var->transp.length == 0) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB565;
|
|
else
|
|
return PIX_FMT_BGR565;
|
|
}
|
|
|
|
if (var->transp.length == 1 && var->green.length <= 5) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB1555;
|
|
else
|
|
return PIX_FMT_BGR1555;
|
|
}
|
|
|
|
/* fall through */
|
|
}
|
|
|
|
/*
|
|
* Check for 888/A888.
|
|
*/
|
|
if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
|
|
var->green.length <= 8 && var->blue.length <= 8) {
|
|
if (var->bits_per_pixel == 24 && var->transp.length == 0) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB888PACK;
|
|
else
|
|
return PIX_FMT_BGR888PACK;
|
|
}
|
|
|
|
if (var->bits_per_pixel == 32 && var->transp.length == 8) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGBA888;
|
|
else
|
|
return PIX_FMT_BGRA888;
|
|
} else {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB888UNPACK;
|
|
else
|
|
return PIX_FMT_BGR888UNPACK;
|
|
}
|
|
|
|
/* fall through */
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
|
|
{
|
|
switch (pix_fmt) {
|
|
case PIX_FMT_RGB565:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 11; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 6;
|
|
var->blue.offset = 0; var->blue.length = 5;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_BGR565:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 0; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 6;
|
|
var->blue.offset = 11; var->blue.length = 5;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_RGB1555:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 10; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 5;
|
|
var->blue.offset = 0; var->blue.length = 5;
|
|
var->transp.offset = 15; var->transp.length = 1;
|
|
break;
|
|
case PIX_FMT_BGR1555:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 0; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 5;
|
|
var->blue.offset = 10; var->blue.length = 5;
|
|
var->transp.offset = 15; var->transp.length = 1;
|
|
break;
|
|
case PIX_FMT_RGB888PACK:
|
|
var->bits_per_pixel = 24;
|
|
var->red.offset = 16; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_BGR888PACK:
|
|
var->bits_per_pixel = 24;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 16; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_RGBA888:
|
|
var->bits_per_pixel = 32;
|
|
var->red.offset = 16; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 24; var->transp.length = 8;
|
|
break;
|
|
case PIX_FMT_BGRA888:
|
|
var->bits_per_pixel = 32;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 16; var->blue.length = 8;
|
|
var->transp.offset = 24; var->transp.length = 8;
|
|
break;
|
|
case PIX_FMT_PSEUDOCOLOR:
|
|
var->bits_per_pixel = 8;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 0; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
|
|
struct fb_videomode *mode, int pix_fmt, int ystretch)
|
|
{
|
|
struct fb_info *info = fbi->info;
|
|
|
|
set_pix_fmt(var, pix_fmt);
|
|
|
|
var->xres = mode->xres;
|
|
var->yres = mode->yres;
|
|
var->xres_virtual = max(var->xres, var->xres_virtual);
|
|
if (ystretch)
|
|
var->yres_virtual = info->fix.smem_len /
|
|
(var->xres_virtual * (var->bits_per_pixel >> 3));
|
|
else
|
|
var->yres_virtual = max(var->yres, var->yres_virtual);
|
|
var->grayscale = 0;
|
|
var->accel_flags = FB_ACCEL_NONE;
|
|
var->pixclock = mode->pixclock;
|
|
var->left_margin = mode->left_margin;
|
|
var->right_margin = mode->right_margin;
|
|
var->upper_margin = mode->upper_margin;
|
|
var->lower_margin = mode->lower_margin;
|
|
var->hsync_len = mode->hsync_len;
|
|
var->vsync_len = mode->vsync_len;
|
|
var->sync = mode->sync;
|
|
var->vmode = FB_VMODE_NONINTERLACED;
|
|
var->rotate = FB_ROTATE_UR;
|
|
}
|
|
|
|
static int pxa168fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
int pix_fmt;
|
|
|
|
/*
|
|
* Determine which pixel format we're going to use.
|
|
*/
|
|
pix_fmt = determine_best_pix_fmt(var);
|
|
if (pix_fmt < 0)
|
|
return pix_fmt;
|
|
set_pix_fmt(var, pix_fmt);
|
|
fbi->pix_fmt = pix_fmt;
|
|
|
|
/*
|
|
* Basic geometry sanity checks.
|
|
*/
|
|
if (var->xoffset + var->xres > var->xres_virtual)
|
|
return -EINVAL;
|
|
if (var->yoffset + var->yres > var->yres_virtual)
|
|
return -EINVAL;
|
|
if (var->xres + var->right_margin +
|
|
var->hsync_len + var->left_margin > 2048)
|
|
return -EINVAL;
|
|
if (var->yres + var->lower_margin +
|
|
var->vsync_len + var->upper_margin > 2048)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Check size of framebuffer.
|
|
*/
|
|
if (var->xres_virtual * var->yres_virtual *
|
|
(var->bits_per_pixel >> 3) > info->fix.smem_len)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The hardware clock divider has an integer and a fractional
|
|
* stage:
|
|
*
|
|
* clk2 = clk_in / integer_divider
|
|
* clk_out = clk2 * (1 - (fractional_divider >> 12))
|
|
*
|
|
* Calculate integer and fractional divider for given clk_in
|
|
* and clk_out.
|
|
*/
|
|
static void set_clock_divider(struct pxa168fb_info *fbi,
|
|
const struct fb_videomode *m)
|
|
{
|
|
int divider_int;
|
|
int needed_pixclk;
|
|
u64 div_result;
|
|
u32 x = 0;
|
|
|
|
/*
|
|
* Notice: The field pixclock is used by linux fb
|
|
* is in pixel second. E.g. struct fb_videomode &
|
|
* struct fb_var_screeninfo
|
|
*/
|
|
|
|
/*
|
|
* Check input values.
|
|
*/
|
|
if (!m || !m->pixclock || !m->refresh) {
|
|
dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Using PLL/AXI clock.
|
|
*/
|
|
x = 0x80000000;
|
|
|
|
/*
|
|
* Calc divider according to refresh rate.
|
|
*/
|
|
div_result = 1000000000000ll;
|
|
do_div(div_result, m->pixclock);
|
|
needed_pixclk = (u32)div_result;
|
|
|
|
divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
|
|
|
|
/* check whether divisor is too small. */
|
|
if (divider_int < 2) {
|
|
dev_warn(fbi->dev, "Warning: clock source is too slow. "
|
|
"Try smaller resolution\n");
|
|
divider_int = 2;
|
|
}
|
|
|
|
/*
|
|
* Set setting to reg.
|
|
*/
|
|
x |= divider_int;
|
|
writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
|
|
}
|
|
|
|
static void set_dma_control0(struct pxa168fb_info *fbi)
|
|
{
|
|
u32 x;
|
|
|
|
/*
|
|
* Set bit to enable graphics DMA.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
x &= ~CFG_GRA_ENA_MASK;
|
|
x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
|
|
|
|
/*
|
|
* If we are in a pseudo-color mode, we need to enable
|
|
* palette lookup.
|
|
*/
|
|
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
|
|
x |= 0x10000000;
|
|
|
|
/*
|
|
* Configure hardware pixel format.
|
|
*/
|
|
x &= ~(0xF << 16);
|
|
x |= (fbi->pix_fmt >> 1) << 16;
|
|
|
|
/*
|
|
* Check red and blue pixel swap.
|
|
* 1. source data swap
|
|
* 2. panel output data swap
|
|
*/
|
|
x &= ~(1 << 12);
|
|
x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
}
|
|
|
|
static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
|
|
{
|
|
u32 x;
|
|
|
|
/*
|
|
* Configure default bits: vsync triggers DMA, gated clock
|
|
* enable, power save enable, configure alpha registers to
|
|
* display 100% graphics, and set pixel command.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
|
|
x |= 0x2032ff81;
|
|
|
|
/*
|
|
* We trigger DMA on the falling edge of vsync if vsync is
|
|
* active low, or on the rising edge if vsync is active high.
|
|
*/
|
|
if (!(sync & FB_SYNC_VERT_HIGH_ACT))
|
|
x |= 0x08000000;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
|
|
}
|
|
|
|
static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int pixel_offset;
|
|
unsigned long addr;
|
|
|
|
pixel_offset = (yoffset * var->xres_virtual) + xoffset;
|
|
|
|
addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
|
|
writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
|
|
}
|
|
|
|
static void set_dumb_panel_control(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct pxa168fb_mach_info *mi = dev_get_platdata(fbi->dev);
|
|
u32 x;
|
|
|
|
/*
|
|
* Preserve enable flag.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
|
|
|
|
x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
|
|
x |= mi->gpio_output_data << 20;
|
|
x |= mi->gpio_output_mask << 12;
|
|
x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
|
|
x |= mi->invert_composite_blank ? 0x00000040 : 0;
|
|
x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
|
|
x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
|
|
x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
|
|
x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
|
|
x |= mi->invert_pixclock ? 0x00000002 : 0;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
}
|
|
|
|
static void set_dumb_screen_dimensions(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *v = &info->var;
|
|
int x;
|
|
int y;
|
|
|
|
x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
|
|
y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
|
|
|
|
writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
|
|
}
|
|
|
|
static int pxa168fb_set_par(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
struct fb_videomode mode;
|
|
u32 x;
|
|
|
|
/*
|
|
* Set additional mode info.
|
|
*/
|
|
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
else
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
|
|
info->fix.ypanstep = var->yres;
|
|
|
|
/*
|
|
* Disable panel output while we setup the display.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
|
|
/*
|
|
* Configure global panel parameters.
|
|
*/
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_V_H_ACTIVE);
|
|
|
|
/*
|
|
* convet var to video mode
|
|
*/
|
|
fb_var_to_videomode(&mode, &info->var);
|
|
|
|
/* Calculate clock divisor. */
|
|
set_clock_divider(fbi, &mode);
|
|
|
|
/* Configure dma ctrl regs. */
|
|
set_dma_control0(fbi);
|
|
set_dma_control1(fbi, info->var.sync);
|
|
|
|
/*
|
|
* Configure graphics DMA parameters.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
|
|
x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
|
|
writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
|
|
|
|
/*
|
|
* Configure dumb panel ctrl regs & timings.
|
|
*/
|
|
set_dumb_panel_control(info);
|
|
set_dumb_screen_dimensions(info);
|
|
|
|
writel((var->left_margin << 16) | var->right_margin,
|
|
fbi->reg_base + LCD_SPU_H_PORCH);
|
|
writel((var->upper_margin << 16) | var->lower_margin,
|
|
fbi->reg_base + LCD_SPU_V_PORCH);
|
|
|
|
/*
|
|
* Re-enable panel output.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
|
|
{
|
|
return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
|
|
}
|
|
|
|
static u32 to_rgb(u16 red, u16 green, u16 blue)
|
|
{
|
|
red >>= 8;
|
|
green >>= 8;
|
|
blue >>= 8;
|
|
|
|
return (red << 16) | (green << 8) | blue;
|
|
}
|
|
|
|
static int
|
|
pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
|
|
unsigned int blue, unsigned int trans, struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
u32 val;
|
|
|
|
if (info->var.grayscale)
|
|
red = green = blue = (19595 * red + 38470 * green +
|
|
7471 * blue) >> 16;
|
|
|
|
if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
|
|
val = chan_to_field(red, &info->var.red);
|
|
val |= chan_to_field(green, &info->var.green);
|
|
val |= chan_to_field(blue , &info->var.blue);
|
|
fbi->pseudo_palette[regno] = val;
|
|
}
|
|
|
|
if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
|
|
val = to_rgb(red, green, blue);
|
|
writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
|
|
writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168fb_blank(int blank, struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
|
|
fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
|
|
set_dumb_panel_control(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
set_graphics_start(info, var->xoffset, var->yoffset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct pxa168fb_info *fbi = dev_id;
|
|
u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
|
|
|
|
if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
|
|
|
|
writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
|
|
fbi->reg_base + SPU_IRQ_ISR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static const struct fb_ops pxa168fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = pxa168fb_check_var,
|
|
.fb_set_par = pxa168fb_set_par,
|
|
.fb_setcolreg = pxa168fb_setcolreg,
|
|
.fb_blank = pxa168fb_blank,
|
|
.fb_pan_display = pxa168fb_pan_display,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static int pxa168fb_init_mode(struct fb_info *info,
|
|
struct pxa168fb_mach_info *mi)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int ret = 0;
|
|
u32 total_w, total_h, refresh;
|
|
u64 div_result;
|
|
const struct fb_videomode *m;
|
|
|
|
/*
|
|
* Set default value
|
|
*/
|
|
refresh = DEFAULT_REFRESH;
|
|
|
|
/* try to find best video mode. */
|
|
m = fb_find_best_mode(&info->var, &info->modelist);
|
|
if (m)
|
|
fb_videomode_to_var(&info->var, m);
|
|
|
|
/* Init settings. */
|
|
var->xres_virtual = var->xres;
|
|
var->yres_virtual = info->fix.smem_len /
|
|
(var->xres_virtual * (var->bits_per_pixel >> 3));
|
|
dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
|
|
var->xres, var->yres);
|
|
|
|
/* correct pixclock. */
|
|
total_w = var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len;
|
|
total_h = var->yres + var->upper_margin + var->lower_margin +
|
|
var->vsync_len;
|
|
|
|
div_result = 1000000000000ll;
|
|
do_div(div_result, total_w * total_h * refresh);
|
|
var->pixclock = (u32)div_result;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pxa168fb_probe(struct platform_device *pdev)
|
|
{
|
|
struct pxa168fb_mach_info *mi;
|
|
struct fb_info *info = 0;
|
|
struct pxa168fb_info *fbi = 0;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
int irq, ret;
|
|
|
|
mi = dev_get_platdata(&pdev->dev);
|
|
if (mi == NULL) {
|
|
dev_err(&pdev->dev, "no platform data defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk = devm_clk_get(&pdev->dev, "LCDCLK");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "unable to get LCDCLK");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "no IO memory defined\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no IRQ defined\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
|
|
if (info == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialize private data */
|
|
fbi = info->par;
|
|
fbi->info = info;
|
|
fbi->clk = clk;
|
|
fbi->dev = info->dev = &pdev->dev;
|
|
fbi->panel_rbswap = mi->panel_rbswap;
|
|
fbi->is_blanked = 0;
|
|
fbi->active = mi->active;
|
|
|
|
/*
|
|
* Initialise static fb parameters.
|
|
*/
|
|
info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
|
|
FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
|
|
info->node = -1;
|
|
strlcpy(info->fix.id, mi->id, 16);
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 0;
|
|
info->fix.ypanstep = 0;
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.mmio_start = res->start;
|
|
info->fix.mmio_len = resource_size(res);
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
info->fbops = &pxa168fb_ops;
|
|
info->pseudo_palette = fbi->pseudo_palette;
|
|
|
|
/*
|
|
* Map LCD controller registers.
|
|
*/
|
|
fbi->reg_base = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (fbi->reg_base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto failed_free_info;
|
|
}
|
|
|
|
/*
|
|
* Allocate framebuffer memory.
|
|
*/
|
|
info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
|
|
|
|
info->screen_base = dma_alloc_wc(fbi->dev, info->fix.smem_len,
|
|
&fbi->fb_start_dma, GFP_KERNEL);
|
|
if (info->screen_base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto failed_free_info;
|
|
}
|
|
|
|
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
|
|
set_graphics_start(info, 0, 0);
|
|
|
|
/*
|
|
* Set video mode according to platform data.
|
|
*/
|
|
set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
|
|
|
|
fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
|
|
|
|
/*
|
|
* init video mode data.
|
|
*/
|
|
pxa168fb_init_mode(info, mi);
|
|
|
|
/*
|
|
* Fill in sane defaults.
|
|
*/
|
|
ret = pxa168fb_check_var(&info->var, info);
|
|
if (ret)
|
|
goto failed_free_fbmem;
|
|
|
|
/*
|
|
* enable controller clock
|
|
*/
|
|
clk_prepare_enable(fbi->clk);
|
|
|
|
pxa168fb_set_par(info);
|
|
|
|
/*
|
|
* Configure default register values.
|
|
*/
|
|
writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
|
|
writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
|
|
writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
|
|
writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
|
|
writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
|
|
writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
|
|
fbi->reg_base + LCD_SPU_SRAM_PARA1);
|
|
|
|
/*
|
|
* Allocate color map.
|
|
*/
|
|
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
|
|
ret = -ENOMEM;
|
|
goto failed_free_clk;
|
|
}
|
|
|
|
/*
|
|
* Register irq handler.
|
|
*/
|
|
ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq,
|
|
IRQF_SHARED, info->fix.id, fbi);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "unable to request IRQ\n");
|
|
ret = -ENXIO;
|
|
goto failed_free_cmap;
|
|
}
|
|
|
|
/*
|
|
* Enable GFX interrupt
|
|
*/
|
|
writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
|
|
|
|
/*
|
|
* Register framebuffer.
|
|
*/
|
|
ret = register_framebuffer(info);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
|
|
ret = -ENXIO;
|
|
goto failed_free_cmap;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, fbi);
|
|
return 0;
|
|
|
|
failed_free_cmap:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
failed_free_clk:
|
|
clk_disable_unprepare(fbi->clk);
|
|
failed_free_fbmem:
|
|
dma_free_wc(fbi->dev, info->fix.smem_len,
|
|
info->screen_base, fbi->fb_start_dma);
|
|
failed_free_info:
|
|
kfree(info);
|
|
|
|
dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int pxa168fb_remove(struct platform_device *pdev)
|
|
{
|
|
struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
|
|
struct fb_info *info;
|
|
int irq;
|
|
unsigned int data;
|
|
|
|
if (!fbi)
|
|
return 0;
|
|
|
|
/* disable DMA transfer */
|
|
data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
data &= ~CFG_GRA_ENA_MASK;
|
|
writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
|
|
info = fbi->info;
|
|
|
|
unregister_framebuffer(info);
|
|
|
|
writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
|
|
|
|
if (info->cmap.len)
|
|
fb_dealloc_cmap(&info->cmap);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
dma_free_wc(fbi->dev, info->fix.smem_len,
|
|
info->screen_base, info->fix.smem_start);
|
|
|
|
clk_disable_unprepare(fbi->clk);
|
|
|
|
framebuffer_release(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pxa168fb_driver = {
|
|
.driver = {
|
|
.name = "pxa168-fb",
|
|
},
|
|
.probe = pxa168fb_probe,
|
|
.remove = pxa168fb_remove,
|
|
};
|
|
|
|
module_platform_driver(pxa168fb_driver);
|
|
|
|
MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
|
|
"Green Wan <gwan@marvell.com>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
|
|
MODULE_LICENSE("GPL");
|