linux/drivers/input/touchscreen/tsc2004.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

80 lines
1.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* TSC2004 touchscreen driver
*
* Copyright (C) 2015 QWERTY Embedded Design
* Copyright (C) 2015 EMAC Inc.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/of.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include "tsc200x-core.h"
static const struct input_id tsc2004_input_id = {
.bustype = BUS_I2C,
.product = 2004,
};
static int tsc2004_cmd(struct device *dev, u8 cmd)
{
u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
s32 data;
struct i2c_client *i2c = to_i2c_client(dev);
data = i2c_smbus_write_byte(i2c, tx);
if (data < 0) {
dev_err(dev, "%s: failed, command: %x i2c error: %d\n",
__func__, cmd, data);
return data;
}
return 0;
}
static int tsc2004_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
return tsc200x_probe(&i2c->dev, i2c->irq, &tsc2004_input_id,
devm_regmap_init_i2c(i2c, &tsc200x_regmap_config),
tsc2004_cmd);
}
static void tsc2004_remove(struct i2c_client *i2c)
{
tsc200x_remove(&i2c->dev);
}
static const struct i2c_device_id tsc2004_idtable[] = {
{ "tsc2004", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tsc2004_idtable);
#ifdef CONFIG_OF
static const struct of_device_id tsc2004_of_match[] = {
{ .compatible = "ti,tsc2004" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tsc2004_of_match);
#endif
static struct i2c_driver tsc2004_driver = {
.driver = {
.name = "tsc2004",
.of_match_table = of_match_ptr(tsc2004_of_match),
.pm = &tsc200x_pm_ops,
},
.id_table = tsc2004_idtable,
.probe = tsc2004_probe,
.remove = tsc2004_remove,
};
module_i2c_driver(tsc2004_driver);
MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
MODULE_DESCRIPTION("TSC2004 Touchscreen Driver");
MODULE_LICENSE("GPL");