iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a0d942960d
linux/drivers/usb/core/quirks.c
Hardik Gajjar 5a1ccf0c72 usb: new quirk to reduce the SET_ADDRESS request timeout 
This patch introduces a new USB quirk,
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value
for the SET_ADDRESS request. The standard timeout for USB request/command
is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1).

However, certain scenarios, such as connecting devices through an APTIV
hub, can lead to timeout errors when the device enumerates as full speed
initially and later switches to high speed during chirp negotiation.

In such cases, USB analyzer logs reveal that the bus suspends for
5 seconds due to incorrect chirp parsing and resumes only after two
consecutive timeout errors trigger a hub driver reset.

Packet(54) Dir(?) Full Speed J(997.100 us) Idle(  2.850 us)
_______| Time Stamp(28 . 105 910 682)
_______|_____________________________________________________________Ch0
Packet(55) Dir(?) Full Speed J(997.118 us) Idle(  2.850 us)
_______| Time Stamp(28 . 106 910 632)
_______|_____________________________________________________________Ch0
Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us)
_______| Time Stamp(28 . 107 910 600)
_______|_____________________________________________________________Ch0
Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms)
_______| Time Stamp(28 . 108 532 832)
_______|_____________________________________________________________Ch0
Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle(  5.366 us)
_______| Time Stamp(28 . 247 657 600)
_______|_____________________________________________________________Ch0

This 5-second delay in device enumeration is undesirable, particularly
in automotive applications where quick enumeration is crucial
(ideally within 3 seconds).

The newly introduced quirks provide the flexibility to align with a
3-second time limit, as required in specific contexts like automotive
applications.

By reducing the SET_ADDRESS request timeout to 500 ms, the
system can respond more swiftly to errors, initiate rapid recovery, and
ensure efficient device enumeration. This change is vital for scenarios
where rapid smartphone enumeration and screen projection are essential.

To use the quirk, please write "vendor_id:product_id:p" to
/sys/bus/usb/drivers/hub/module/parameter/quirks

For example,
echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks"

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-23 12:32:44 +00:00

743 lines
21 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* USB device quirk handling logic and table
*
* Copyright (c) 2007 Oliver Neukum
* Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*/
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/usb/hcd.h>
#include "usb.h"
struct quirk_entry {
u16 vid;
u16 pid;
u32 flags;
};
static DEFINE_MUTEX(quirk_mutex);
static struct quirk_entry *quirk_list;
static unsigned int quirk_count;
static char quirks_param[128];
static int quirks_param_set(const char *value, const struct kernel_param *kp)
{
char *val, *p, *field;
u16 vid, pid;
u32 flags;
size_t i;
int err;
val = kstrdup(value, GFP_KERNEL);
if (!val)
return -ENOMEM;
err = param_set_copystring(val, kp);
if (err) {
kfree(val);
return err;
}
mutex_lock(&quirk_mutex);
if (!*val) {
quirk_count = 0;
kfree(quirk_list);
quirk_list = NULL;
goto unlock;
}
for (quirk_count = 1, i = 0; val[i]; i++)
if (val[i] == ',')
quirk_count++;
if (quirk_list) {
kfree(quirk_list);
quirk_list = NULL;
}
quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry),
GFP_KERNEL);
if (!quirk_list) {
quirk_count = 0;
mutex_unlock(&quirk_mutex);
kfree(val);
return -ENOMEM;
}
for (i = 0, p = val; p && *p;) {
/* Each entry consists of VID:PID:flags */
field = strsep(&p, ":");
if (!field)
break;
if (kstrtou16(field, 16, &vid))
break;
field = strsep(&p, ":");
if (!field)
break;
if (kstrtou16(field, 16, &pid))
break;
field = strsep(&p, ",");
if (!field || !*field)
break;
/* Collect the flags */
for (flags = 0; *field; field++) {
switch (*field) {
case 'a':
flags |= USB_QUIRK_STRING_FETCH_255;
break;
case 'b':
flags |= USB_QUIRK_RESET_RESUME;
break;
case 'c':
flags |= USB_QUIRK_NO_SET_INTF;
break;
case 'd':
flags |= USB_QUIRK_CONFIG_INTF_STRINGS;
break;
case 'e':
flags |= USB_QUIRK_RESET;
break;
case 'f':
flags |= USB_QUIRK_HONOR_BNUMINTERFACES;
break;
case 'g':
flags |= USB_QUIRK_DELAY_INIT;
break;
case 'h':
flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL;
break;
case 'i':
flags |= USB_QUIRK_DEVICE_QUALIFIER;
break;
case 'j':
flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP;
break;
case 'k':
flags |= USB_QUIRK_NO_LPM;
break;
case 'l':
flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL;
break;
case 'm':
flags |= USB_QUIRK_DISCONNECT_SUSPEND;
break;
case 'n':
flags |= USB_QUIRK_DELAY_CTRL_MSG;
break;
case 'o':
flags |= USB_QUIRK_HUB_SLOW_RESET;
break;
case 'p':
flags |= USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT;
break;
/* Ignore unrecognized flag characters */
}
}
quirk_list[i++] = (struct quirk_entry)
{ .vid = vid, .pid = pid, .flags = flags };
}
if (i < quirk_count)
quirk_count = i;
unlock:
mutex_unlock(&quirk_mutex);
kfree(val);
return 0;
}
static const struct kernel_param_ops quirks_param_ops = {
.set = quirks_param_set,
.get = param_get_string,
};
static struct kparam_string quirks_param_string = {
.maxlen = sizeof(quirks_param),
.string = quirks_param,
};
device_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644);
MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks");
/* Lists of quirky USB devices, split in device quirks and interface quirks.
* Device quirks are applied at the very beginning of the enumeration process,
* right after reading the device descriptor. They can thus only match on device
* information.
*
* Interface quirks are applied after reading all the configuration descriptors.
* They can match on both device and interface information.
*
* Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
* interface quirks, as they only influence the enumeration process which is run
* before processing the interface quirks.
*
* Please keep the lists ordered by:
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
*/
static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
/* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
{ USB_DEVICE(0x0218, 0x0201), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* WORLDE easy key (easykey.25) MIDI controller */
{ USB_DEVICE(0x0218, 0x0401), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* HP v222w 16GB Mini USB Drive */
{ USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT },
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
/* USB3503 */
{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft Wireless Laser Mouse 6000 Receiver */
{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft Surface Dock Ethernet (RTL8153 GigE) */
{ USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM },
/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech HD Webcam C270 */
{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech ConferenceCam CC3000e */
{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech PTZ Pro Camera */
{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech Screen Share */
{ USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM },
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Orbit MP */
{ USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Pro for Notebook */
{ USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Pro 5000 */
{ USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam OEM Dell Notebook */
{ USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam OEM Cisco VT Camera II */
{ USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
/* Plantronic Audio 655 DSP */
{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
/* Plantronic Audio 648 USB */
{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
/* Artisman Watchdog Dongle */
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Microchip Joss Optical infrared touchboard device */
{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* CarrolTouch 4000U */
{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
/* CarrolTouch 4500U */
{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Elan Touchscreen */
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x010c), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x0125), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x0381), .driver_info =
USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
/* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */
{ USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM },
/* ELSA MicroLink 56K */
{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME },
/* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
{ USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* Saitek Cyborg Gold Joystick */
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Agfa SNAPSCAN 1212U */
{ USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME },
/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
/* Guillemot Webcam Hercules Dualpix Exchange*/
{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
/* Guillemot Hercules DJ Console audio card (BZ 208357) */
{ USB_DEVICE(0x06f8, 0xb000), .driver_info =
USB_QUIRK_ENDPOINT_IGNORE },
/* Midiman M-Audio Keystation 88es */
{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
/* SanDisk Ultra Fit and Ultra Flair */
{ USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
/* Realforce 87U Keyboard */
{ USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
/* Baum Vario Ultra */
{ USB_DEVICE(0x0904, 0x6101), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
{ USB_DEVICE(0x0904, 0x6102), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
{ USB_DEVICE(0x0904, 0x6103), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
/* Sound Devices USBPre2 */
{ USB_DEVICE(0x0926, 0x0202), .driver_info =
USB_QUIRK_ENDPOINT_IGNORE },
/* Sound Devices MixPre-D */
{ USB_DEVICE(0x0926, 0x0208), .driver_info =
USB_QUIRK_ENDPOINT_IGNORE },
/* Keytouch QWERTY Panel keyboard */
{ USB_DEVICE(0x0926, 0x3333), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Kingston DataTraveler 3.0 */
{ USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM },
/* NVIDIA Jetson devices in Force Recovery mode */
{ USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME },
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
/* ELMO L-12F document camera */
{ USB_DEVICE(0x09a1, 0x0028), .driver_info = USB_QUIRK_DELAY_CTRL_MSG },
/* Broadcom BCM92035DGROM BT dongle */
{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
/* MAYA44USB sound device */
{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
/* ASUS Base Station(T100) */
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
/* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
{ USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
/* Realtek hub in Dell WD19 (Type-C) */
{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
/* Generic RTL8153 based ethernet adapters */
{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
/* SONiX USB DEVICE Touchpad */
{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* novation SoundControl XL */
{ USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME },
/* Focusrite Scarlett Solo USB */
{ USB_DEVICE(0x1235, 0x8211), .driver_info =
USB_QUIRK_DISCONNECT_SUSPEND },
/* Huawei 4G LTE module */
{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
USB_QUIRK_DISCONNECT_SUSPEND },
{ USB_DEVICE(0x12d1, 0x15c3), .driver_info =
USB_QUIRK_DISCONNECT_SUSPEND },
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
/* Razer - Razer Blade Keyboard */
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
/* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */
{ USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME },
/* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
{ USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
USB_QUIRK_DISCONNECT_SUSPEND },
/* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */
{ USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM },
/* BUILDWIN Photo Frame */
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
/* Protocol and OTG Electrical Test Device */
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
/* Terminus Technology Inc. Hub */
{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
/* Corsair K70 RGB */
{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair Strafe */
{ USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair Strafe RGB */
{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair K70 LUX RGB */
{ USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT },
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
/* Corsair K70 RGB RAPDIFIRE */
{ USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
/* MIDI keyboard WORLDE MINI */
{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Acer C120 LED Projector */
{ USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design Intensity Shuttle */
{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design UltraStudio SDI */
{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
/* Hauppauge HVR-950q */
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Raydium Touchscreen */
{ USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM },
/* APTIV AUTOMOTIVE HUB */
{ USB_DEVICE(0x2c48, 0x0132), .driver_info =
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT },
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
/* Alcor Link AK9563 SC Reader used in 2022 Lenovo ThinkPads */
{ USB_DEVICE(0x2ce3, 0x9563), .driver_info = USB_QUIRK_NO_LPM },
/* DELL USB GEN2 */
{ USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
/* VCOM device */
{ USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
static const struct usb_device_id usb_interface_quirk_list[] = {
/* Logitech UVC Cameras */
{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
.driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
static const struct usb_device_id usb_amd_resume_quirk_list[] = {
/* Lenovo Mouse with Pixart controller */
{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
/* Pixart Mouse */
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Optical Mouse M90/M100 */
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
/*
* Entries for endpoints that should be ignored when parsing configuration
* descriptors.
*
* Matched for devices with USB_QUIRK_ENDPOINT_IGNORE.
*/
static const struct usb_device_id usb_endpoint_ignore[] = {
{ USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x01 },
{ USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x81 },
{ USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0202, 1), .driver_info = 0x85 },
{ USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0208, 1), .driver_info = 0x85 },
{ }
};
bool usb_endpoint_is_ignored(struct usb_device *udev,
struct usb_host_interface *intf,
struct usb_endpoint_descriptor *epd)
{
const struct usb_device_id *id;
unsigned int address;
for (id = usb_endpoint_ignore; id->match_flags; ++id) {
if (!usb_match_device(udev, id))
continue;
if (!usb_match_one_id_intf(udev, intf, id))
continue;
address = id->driver_info;
if (address == epd->bEndpointAddress)
return true;
}
return false;
}
static bool usb_match_any_interface(struct usb_device *udev,
const struct usb_device_id *id)
{
unsigned int i;
for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
struct usb_host_config *cfg = &udev->config[i];
unsigned int j;
for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
struct usb_interface_cache *cache;
struct usb_host_interface *intf;
cache = cfg->intf_cache[j];
if (cache->num_altsetting == 0)
continue;
intf = &cache->altsetting[0];
if (usb_match_one_id_intf(udev, intf, id))
return true;
}
}
return false;
}
static int usb_amd_resume_quirk(struct usb_device *udev)
{
struct usb_hcd *hcd;
hcd = bus_to_hcd(udev->bus);
/* The device should be attached directly to root hub */
if (udev->level == 1 && hcd->amd_resume_bug == 1)
return 1;
return 0;
}
static u32 usb_detect_static_quirks(struct usb_device *udev,
const struct usb_device_id *id)
{
u32 quirks = 0;
for (; id->match_flags; id++) {
if (!usb_match_device(udev, id))
continue;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
!usb_match_any_interface(udev, id))
continue;
quirks |= (u32)(id->driver_info);
}
return quirks;
}
static u32 usb_detect_dynamic_quirks(struct usb_device *udev)
{
u16 vid = le16_to_cpu(udev->descriptor.idVendor);
u16 pid = le16_to_cpu(udev->descriptor.idProduct);
int i, flags = 0;
mutex_lock(&quirk_mutex);
for (i = 0; i < quirk_count; i++) {
if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) {
flags = quirk_list[i].flags;
break;
}
}
mutex_unlock(&quirk_mutex);
return flags;
}
/*
* Detect any quirks the device has, and do any housekeeping for it if needed.
*/
void usb_detect_quirks(struct usb_device *udev)
{
udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list);
/*
* Pixart-based mice would trigger remote wakeup issue on AMD
* Yangtze chipset, so set them as RESET_RESUME flag.
*/
if (usb_amd_resume_quirk(udev))
udev->quirks |= usb_detect_static_quirks(udev,
usb_amd_resume_quirk_list);
udev->quirks ^= usb_detect_dynamic_quirks(udev);
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
#ifdef CONFIG_USB_DEFAULT_PERSIST
if (!(udev->quirks & USB_QUIRK_RESET))
udev->persist_enabled = 1;
#else
/* Hubs are automatically enabled for USB-PERSIST */
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
udev->persist_enabled = 1;
#endif /* CONFIG_USB_DEFAULT_PERSIST */
}
void usb_detect_interface_quirks(struct usb_device *udev)
{
u32 quirks;
quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list);
if (quirks == 0)
return;
dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
quirks);
udev->quirks |= quirks;
}
void usb_release_quirk_list(void)
{
mutex_lock(&quirk_mutex);
kfree(quirk_list);
quirk_list = NULL;
mutex_unlock(&quirk_mutex);
}
Reference in New Issue View Git Blame Copy Permalink