iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/tty/serial
History
Joe Burmeister 5d24f455c1 tty: max310x: Fix external crystal register setup 
The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 12:18:17 +02:00
..
8250
dmaengine updates for v5.2-rc1
2019-05-09 08:51:45 -07:00
cpm_uart
tty: add SPDX identifiers to Kconfig and Makefiles
2019-04-04 18:48:43 +02:00
jsm
tty: add SPDX identifiers to Kconfig and Makefiles
2019-04-04 18:48:43 +02:00
21285.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
altera_jtaguart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
altera_uart.c
serial: altera: set RRDY flag also without irq
2018-02-28 13:30:09 +01:00
amba-pl010.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
amba-pl011.c
serial: set suppress_bind_attrs flag only if builtin
2018-11-09 09:07:17 -08:00
amba-pl011.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
apbuart.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
apbuart.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
ar933x_uart.c
serial: ar933x_uart: Fix build failure with disabled console
2019-03-19 15:37:44 +01:00
arc_uart.c
serial: arc_uart: Fix out-of-bounds access through DT alias
2018-02-28 15:29:59 +01:00
atmel_serial.c
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
2019-03-28 00:27:48 +09:00
atmel_serial.h
tty/serial: atmel: add ISO7816 support
2018-10-02 13:38:55 -07:00
bcm63xx_uart.c
MIPS changes for 4.15
2017-11-15 11:36:08 -08:00
clps711x.c
serial: clps711x: Remove board support
2019-01-08 16:55:18 +01:00
digicolor-usart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
dz.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
dz.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
earlycon-arm-semihost.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
earlycon-riscv-sbi.c
tty/serial: use uart_console_write in the RISC-V SBL early console
2019-01-23 15:41:50 -08:00
earlycon.c
earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
2018-05-14 13:41:05 +02:00
efm32-uart.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
fsl_lpuart.c
serial: fsl_lpuart: DMA support for 32-bit variant
2019-01-30 09:31:30 +01:00
icom.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
icom.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ifx6x60.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
ifx6x60.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
imx.c
serial: imx: remove log spamming error message
2019-05-21 12:18:17 +02:00
ioc3_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ioc4_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
ip22zilog.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
ip22zilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
Kconfig
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
kgdb_nmi.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
kgdboc.c
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
2019-03-28 00:27:48 +09:00
lantiq.c
serial: lantiq: Do not swap register read/writes
2019-01-08 16:53:36 +01:00
lpc32xx_hs.c
tty: serial: lpc32xx_hs: fix missing console boot messages
2019-01-18 11:23:00 +01:00
Makefile
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
max310x.c
tty: max310x: Fix external crystal register setup
2019-05-21 12:18:17 +02:00
max3100.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
mcf.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
men_z135_uart.c
drivers: Remove explicit invocations of mmiowb()
2019-04-08 12:01:02 +01:00
meson_uart.c
tty: serial: meson: if no alias specified use an available id
2019-01-18 11:22:22 +01:00
milbeaut_usio.c
serial: milbeaut_usio: Fix error handling in probe and remove
2019-04-29 16:20:24 +02:00
mpc52xx_uart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
mps2-uart.c
serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
2019-01-31 19:34:10 +01:00
mpsc.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
msm_serial.c
tty: serial: msm_serial: Fix XON/XOFF
2019-05-21 12:18:16 +02:00
mux.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
mvebu-uart.c
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-19 15:37:43 +01:00
mxs-auart.c
tty: mxs-auart: fix a potential NULL pointer dereference
2019-03-19 15:37:43 +01:00
netx-serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
omap-serial.c
tty: omap-serial: Fix initial on-boot RTS GPIO level
2018-01-09 16:45:17 +01:00
owl-uart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
pch_uart.c
PCI: Move Rohm Vendor ID to generic list
2019-02-01 17:24:52 -06:00
pic32_uart.c
serial: set suppress_bind_attrs flag only if builtin
2018-11-09 09:07:17 -08:00
pic32_uart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
pmac_zilog.c
tty: Use of_node_name_{eq,prefix} for node name comparisons
2018-12-17 16:12:17 +01:00
pmac_zilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
pnx8xxx_uart.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
pxa.c
serial: pxa: Fix an error handling path in 'serial_pxa_probe()'
2018-06-28 21:07:54 +09:00
qcom_geni_serial.c
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
2019-03-19 15:37:44 +01:00
rda-uart.c
tty: serial: Add RDA8810PL UART driver
2018-12-31 13:10:01 -08:00
rp2.c
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
sa1100.c
treewide: setup_timer() -> timer_setup()
2017-11-21 15:57:07 -08:00
samsung.c
tty: serial: samsung: Enable baud clock during initialisation
2019-02-19 13:42:08 +01:00
samsung.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sb1250-duart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sc16is7xx.c
Merge 5.1-rc6 into tty-next
2019-04-21 23:20:08 +02:00
sccnxp.c
serial: sccnxp: Allow to use non-standard baud rates
2018-12-20 16:26:59 +01:00
serial_core.c
tty: serial_core: fix error code returned by uart_register_driver()
2019-04-25 11:39:51 +02:00
serial_ks8695.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
serial_mctrl_gpio.c
gpiolib: Pass array info to get/set array functions
2018-09-13 11:16:54 +02:00
serial_mctrl_gpio.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
serial_txx9.c
drivers: Remove explicit invocations of mmiowb()
2019-04-08 12:01:02 +01:00
serial-tegra.c
serial: tegra: fix some spelling mistakes
2018-11-09 08:58:18 -08:00
sh-sci.c
serial: sh-sci: disable DMA for uart_console
2019-05-21 12:18:17 +02:00
sh-sci.h
serial: sh-sci: Support for HSCIF RX sampling point adjustment
2018-04-23 10:08:18 +02:00
sifive.c
tty: serial: add driver for the SiFive UART
2019-04-29 16:30:59 +02:00
sirfsoc_uart.c
serial: sirf: Fix out-of-bounds access through DT alias
2018-02-28 15:30:00 +01:00
sirfsoc_uart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
sn_console.c
tty: fix up a few remaining files without SPDX identifiers
2019-04-04 18:48:43 +02:00
sprd_serial.c
serial: sprd: Fix a copy-paste err in sprd_request_dma()
2019-04-16 15:21:33 +02:00
st-asc.c
tty: serial: simplify getting .drvdata
2018-04-22 17:29:43 +02:00
stm32-usart.c
serial: stm32: fix initialization of RS485 mode
2018-03-15 17:39:43 +01:00
stm32-usart.h
serial: stm32: add support for RS485 hardware control mode
2018-03-14 13:35:37 +01:00
suncore.c
tty: Use of_node_name_{eq,prefix} for node name comparisons
2018-12-17 16:12:17 +01:00
sunhv.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
sunsab.c
treewide: kzalloc() -> kcalloc()
2018-06-12 16:19:22 -07:00
sunsab.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
sunsu.c
TTY/Serial driver patches for 4.21-rc1
2018-12-28 20:33:54 -08:00
sunzilog.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
sunzilog.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
tegra-tcu.c
serial: Add Tegra Combined UART driver
2019-01-30 09:31:31 +01:00
timbuart.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
timbuart.h
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
uartlite.c
serial-uartlite: fix null pointer dereference on pointer port
2018-11-27 09:08:15 +01:00
ucc_uart.c
docs: serial: convert docs to ReST and rename to *.rst
2019-04-25 11:37:42 +02:00
vr41xx_siu.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
vt8500_serial.c
tty: serial: Remove redundant license text
2017-11-08 13:08:12 +01:00
xilinx_uartps.c
serial: uartps: Add support for cts-override
2019-04-29 16:20:24 +02:00
zs.c
tty: add SPDX identifiers to all remaining files in drivers/tty/
2017-11-08 13:08:12 +01:00
zs.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00