iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/tty/serial
History
satya priya a1b44ea340 tty: serial: qcom_geni_serial: Add 51.2MHz frequency support 
To support BT use case over UART at baud rate of 3.2 Mbps,
we need SE clocks to run at 51.2MHz frequency. Previously this
frequency was not available in clk src, so, we were requesting
for 102.4 MHz and dividing it internally by 2 to get 51.2MHz.

As now 51.2MHz frequency is made available in clk src,
adding this frequency to UART frequency table.

We will save significant amount of power, if 51.2 is used
because it belongs to LowSVS range whereas 102.4 fall into
Nominal category.

Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1590747282-5487-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29 13:49:02 +02:00
..
8250
serial: 8250_fintek: Add F81966 Support
2020-05-29 13:00:54 +02:00
cpm_uart
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
jsm
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
21285.c
tty: serial: 21285: stop using the unused[] variable from struct uart_port
2019-12-19 20:10:28 +01:00
altera_jtaguart.c
…
altera_uart.c
serial: altera: set RRDY flag also without irq
2018-02-28 13:30:09 +01:00
amba-pl010.c
tty/serial: Migrate amba-pl01* to use has_sysrq
2019-12-18 15:04:44 +01:00
amba-pl011.c
serial: amba-pl011: Make sure we initialize the port.lock spinlock
2020-05-05 16:24:22 +02:00
amba-pl011.h
…
apbuart.c
tty/serial: Migrate apbuart to use has_sysrq
2019-12-18 15:04:44 +01:00
apbuart.h
…
ar933x_uart.c
serial: Allow uart_get_rs485_mode() to return errno
2020-05-15 14:47:05 +02:00
arc_uart.c
tty/serial: Migrate arc_uart to use has_sysrq
2019-12-18 15:04:45 +01:00
atmel_serial.c
serial: Allow uart_get_rs485_mode() to return errno
2020-05-15 14:47:05 +02:00
atmel_serial.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
bcm63xx_uart.c
Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"
2020-05-04 11:49:57 +02:00
clps711x.c
tty/serial: Migrate clps711x to use has_sysrq
2019-12-18 15:04:46 +01:00
digicolor-usart.c
tty/serial: digicolor: Fix digicolor-usart already registered warning
2019-06-10 19:08:31 +02:00
dz.c
TTY/Serial driver updates for 5.6-rc1
2020-01-29 10:13:27 -08:00
dz.h
…
earlycon-arm-semihost.c
…
earlycon-riscv-sbi.c
tty/serial: use uart_console_write in the RISC-V SBL early console
2019-01-23 15:41:50 -08:00
earlycon.c
serial: earlycon: prefer EARLYCON_DECLARE() variant
2020-03-07 09:52:01 +01:00
efm32-uart.c
tty: serial: efm32: fix spelling mistake "reserverd" -> "reserved"
2020-02-19 11:38:58 +01:00
fsl_linflexuart.c
tty/serial: Migrate fsl_linflexuart to use has_sysrq
2019-12-18 15:04:48 +01:00
fsl_lpuart.c
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
2020-05-15 15:46:29 +02:00
icom.c
tty: serial: Remove call to memset after pci_alloc_consistent
2019-09-04 12:43:44 +02:00
icom.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
ifx6x60.c
tty: serial: ifx6x60: Convert to GPIO descriptors
2020-03-12 10:03:54 +01:00
ifx6x60.h
tty: serial: ifx6x60: Convert to GPIO descriptors
2020-03-12 10:03:54 +01:00
imx.c
tty: serial: imx: clear Ageing Timer Interrupt in handler
2020-05-29 13:00:54 +02:00
ip22zilog.c
tty/serial: Migrate ip22zilog to use has_sysrq
2019-12-18 15:04:50 +01:00
ip22zilog.h
…
Kconfig
tty: serial: Add modem control gpio support for STM32 UART
2020-05-15 12:24:15 +02:00
kgdb_nmi.c
tty/serial: kgdb_nmi: use true,false for bool variable
2020-01-14 14:34:04 +01:00
kgdboc.c
kgdboc: Use for_each_console() helper
2020-02-10 12:34:43 -08:00
lantiq.c
serial: lantiq: Make driver modular
2020-05-15 12:22:19 +02:00
lpc32xx_hs.c
serial: lpc32xx_hs: Drop surplus include
2020-04-16 16:12:33 +02:00
Makefile
{tty: serial, nand: onenand}: samsung: rename to fix build warning
2019-11-18 18:49:11 +01:00
max310x.c
serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control
2019-09-05 09:57:44 +02:00
max3100.c
…
mcf.c
…
men_z135_uart.c
drivers: mcb: use symbol namespaces
2019-11-03 19:54:53 +01:00
meson_uart.c
TTY/Serial driver updates for 5.6-rc1
2020-01-29 10:13:27 -08:00
milbeaut_usio.c
tty/serial: Migrate milbeaut_usio to use has_sysrq
2019-12-18 15:04:51 +01:00
mpc52xx_uart.c
tty/serial: mpc52xx_uart: Don't zero port->sysrq
2019-12-18 15:04:52 +01:00
mps2-uart.c
serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
2019-01-31 19:34:10 +01:00
msm_serial.c
tty: serial: msm_serial: RX SW/FIFO mode fallback
2020-01-14 14:07:51 +01:00
mux.c
TTY/Serial driver updates for 5.6-rc1
2020-01-29 10:13:27 -08:00
mvebu-uart.c
tty:serial:mvebu-uart:fix a wrong return
2020-03-05 21:26:34 +01:00
mxs-auart.c
tty/serial: Migrate mxs-auart to use has_sysrq
2019-12-18 15:04:53 +01:00
omap-serial.c
serial: Allow uart_get_rs485_mode() to return errno
2020-05-15 14:47:05 +02:00
owl-uart.c
tty: serial: owl: add "much needed" clk_prepare_enable()
2020-04-23 15:46:30 +02:00
pch_uart.c
tty: serial: pch_uart: Use scnprintf() for avoiding potential buffer overflow
2020-03-18 12:59:29 +01:00
pic32_uart.c
serial: pic32_uart: Use uart_console() helper
2020-03-12 10:00:22 +01:00
pic32_uart.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
pmac_zilog.c
tty/serial: Migrate pmac_zilog to use has_sysrq
2019-12-18 15:04:56 +01:00
pmac_zilog.h
…
pnx8xxx_uart.c
tty/serial: Migrate pnx8xxx_uart to use has_sysrq
2019-12-18 15:04:57 +01:00
pxa.c
tty/serial: Migrate pxa to use has_sysrq
2019-12-18 15:04:57 +01:00
qcom_geni_serial.c
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
2020-05-29 13:49:02 +02:00
rda-uart.c
remove ioremap_nocache and devm_ioremap_nocache
2020-01-06 09:45:59 +01:00
rp2.c
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
sa1100.c
tty/serial: Migrate sa1100 to use has_sysrq
2019-12-18 15:04:59 +01:00
samsung_tty.c
tty: serial: samsung: Correct clock selection logic
2020-05-15 12:24:15 +02:00
sb1250-duart.c
TTY/Serial driver updates for 5.6-rc1
2020-01-29 10:13:27 -08:00
sc16is7xx.c
sc16is7xx: Add flag to activate IrDA mode
2020-05-29 12:42:56 +02:00
sccnxp.c
tty/serial: Migrate sccnxp to use has_sysrq
2019-12-18 15:05:00 +01:00
serial_core.c
serial: 8250: Support rs485 bus termination GPIO
2020-05-29 12:42:54 +02:00
serial_mctrl_gpio.c
serial: mctrl_gpio: Check for NULL pointer
2019-10-07 13:21:54 +02:00
serial_mctrl_gpio.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
serial_txx9.c
tty/serial: Migrate serial_txx9 to use has_sysrq
2019-12-18 15:05:01 +01:00
serial-tegra.c
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
2020-02-10 12:32:13 -08:00
sh-sci.c
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
2020-04-16 16:16:52 +02:00
sh-sci.h
serial: sh-sci: Drop unused include
2020-04-16 16:13:34 +02:00
sifive.c
tty: serial: add missing spin_lock_init for SiFive serial console
2020-05-15 14:55:10 +02:00
sirfsoc_uart.c
serial: sirf: Fix out-of-bounds access through DT alias
2018-02-28 15:30:00 +01:00
sirfsoc_uart.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
sprd_serial.c
serial: sprd: remove redundant sprd_port cleanup
2020-03-18 12:20:04 +01:00
st-asc.c
tty: st-asc: switch to using devm_gpiod_get()
2020-01-10 14:01:33 +01:00
stm32-usart.c
serial: stm32: add no_console_suspend support
2020-05-19 15:53:36 +02:00
stm32-usart.h
tty: serial: Add modem control gpio support for STM32 UART
2020-05-15 12:24:15 +02:00
suncore.c
tty: Use of_node_name_{eq,prefix} for node name comparisons
2018-12-17 16:12:17 +01:00
sunhv.c
serial: sunhv: Initialize lock for non-registered console
2020-04-16 16:16:52 +02:00
sunsab.c
tty/serial: Migrate sunsab to use has_sysrq
2019-12-18 15:05:05 +01:00
sunsab.h
…
sunsu.c
tty/serial: Migrate sunsu to use has_sysrq
2019-12-18 15:05:06 +01:00
sunzilog.c
tty/serial: Migrate sunzilog to use has_sysrq
2019-12-18 15:05:08 +01:00
sunzilog.h
…
tegra-tcu.c
serial: Add Tegra Combined UART driver
2019-01-30 09:31:31 +01:00
timbuart.c
…
timbuart.h
tty: serial: Use the correct style for SPDX License Identifier
2020-03-07 09:52:01 +01:00
uartlite.c
Revert "serial-uartlite: Move the uart register"
2019-11-14 06:29:08 +08:00
ucc_uart.c
ARM: SoC-related driver updates
2020-02-08 14:04:19 -08:00
vr41xx_siu.c
tty/serial: Migrate vr41xx_siu to use has_sysrq
2019-12-18 15:05:09 +01:00
vt8500_serial.c
tty/serial: Migrate vt8500_serial to use has_sysrq
2019-12-18 15:05:09 +01:00
xilinx_uartps.c
Merge 5.7-rc5 into tty-next
2020-05-11 08:55:10 +02:00
zs.c
TTY/Serial driver updates for 5.6-rc1
2020-01-29 10:13:27 -08:00
zs.h
…