b675542323
Now that we have a graph schema, rework the display related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. In panel-common.yaml, 'ports' is dropped. Any binding using 'ports' should be one with more than 1 port node, and the binding must define what each port is. Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will need further updates to use video-interfaces.yaml once that lands. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org
169 lines
3.8 KiB
YAML
169 lines
3.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ST-Ericsson Multi Channel Display Engine MCDE
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
properties:
|
|
compatible:
|
|
const: ste,mcde
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: an array of the MCDE clocks
|
|
items:
|
|
- description: MCDECLK (main MCDE clock)
|
|
- description: LCDCLK (LCD clock)
|
|
- description: PLLDSI (HDMI clock)
|
|
|
|
clock-names:
|
|
items:
|
|
- const: mcde
|
|
- const: lcd
|
|
- const: hdmi
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
epod-supply:
|
|
description: a phandle to the EPOD regulator
|
|
|
|
vana-supply:
|
|
description: a phandle to the analog voltage regulator
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
A DPI port node
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 1
|
|
|
|
ranges: true
|
|
|
|
patternProperties:
|
|
"^dsi@[0-9a-f]+$":
|
|
description: subnodes for the three DSI host adapters
|
|
type: object
|
|
allOf:
|
|
- $ref: dsi-controller.yaml#
|
|
properties:
|
|
compatible:
|
|
const: ste,mcde-dsi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
vana-supply:
|
|
description: a phandle to the analog voltage regulator
|
|
|
|
clocks:
|
|
description: phandles to the high speed and low power (energy save) clocks
|
|
the high speed clock is not present on the third (dsi2) block, so it
|
|
should only have the "lp" clock
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
clock-names:
|
|
oneOf:
|
|
- items:
|
|
- const: hs
|
|
- const: lp
|
|
- items:
|
|
- const: lp
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- vana-supply
|
|
- clocks
|
|
- clock-names
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- epod-supply
|
|
- vana-supply
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/mfd/dbx500-prcmu.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
mcde@a0350000 {
|
|
compatible = "ste,mcde";
|
|
reg = <0xa0350000 0x1000>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
epod-supply = <&db8500_b2r2_mcde_reg>;
|
|
vana-supply = <&ab8500_ldo_ana_reg>;
|
|
clocks = <&prcmu_clk PRCMU_MCDECLK>,
|
|
<&prcmu_clk PRCMU_LCDCLK>,
|
|
<&prcmu_clk PRCMU_PLLDSI>;
|
|
clock-names = "mcde", "lcd", "hdmi";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dsi0: dsi@a0351000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0351000 0x1000>;
|
|
vana-supply = <&ab8500_ldo_ana_reg>;
|
|
clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
|
|
clock-names = "hs", "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6d16d0";
|
|
reg = <0>;
|
|
vdd1-supply = <&ab8500_ldo_aux1_reg>;
|
|
reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
dsi1: dsi@a0352000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0352000 0x1000>;
|
|
vana-supply = <&ab8500_ldo_ana_reg>;
|
|
clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
|
|
clock-names = "hs", "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
dsi2: dsi@a0353000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0353000 0x1000>;
|
|
vana-supply = <&ab8500_ldo_ana_reg>;
|
|
/* This DSI port only has the Low Power / Energy Save clock */
|
|
clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
|
|
clock-names = "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
...
|