Masaharu Hayakawa 96b9548954 ata: sata_rcar: exclude setting of PHY registers in Gen3 ...

According to documentation, setting of PHY registers is unnecessary with
R-Car Gen3. The registers are not even described. So, don't initialize
them.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[wsa: updated commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

2018-08-06 10:25:34 -07:00

..

acard-ahci.c

libata: convert core and drivers to ->hw_tag usage

2018-05-11 13:10:43 -07:00

ahci_brcm.c

ata: ahci_brcm: Recover from failures to identify devices

2018-01-17 07:52:29 -08:00

ahci_ceva.c

ata: ceva: Add SMMU support for SATA IP

2017-10-23 07:09:27 -07:00

ahci_da850.c

sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'

2017-08-16 07:38:27 -07:00

ahci_dm816.c

ata: ahci: add support for DaVinci DM816 SATA controller

2017-03-24 11:40:03 -04:00

ahci_imx.c

ahci: imx: add the imx8qm ahci sata support

2018-03-29 06:43:55 -07:00

ahci_mtk.c

ahci: mtk: Change driver name to ahci-mtk

2017-12-04 12:35:29 -08:00

ahci_mvebu.c

ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI

2018-04-26 11:25:15 -07:00

ahci_octeon.c

Delete redundant return value check of platform_get_resource()

2017-03-06 15:40:59 -05:00

ahci_platform.c

Revert "ata: ahci_platform: allow disabling of hotplug to save power"

2018-08-06 10:22:35 -07:00

ahci_qoriq.c

libahci: Allow drivers to override stop_engine

2018-04-26 11:25:04 -07:00

ahci_seattle.c

ata: fix return value check in ahci_seattle_get_port_info()

2016-06-15 14:26:41 -04:00

ahci_st.c

ahci: st: Add ports-implemented property in support

2016-08-10 12:16:49 -04:00

ahci_sunxi.c

ata: ahci_platform: fix owner module reference mismatch for scsi host

2015-01-28 18:45:23 -05:00

ahci_tegra.c

ata: ahci_tegra: Add AHCI support for Tegra210

2018-03-14 08:24:21 -07:00

ahci_xgene.c

libahci: Allow drivers to override stop_engine

2018-04-26 11:25:04 -07:00

ahci.c

ata: ahci: Enable DEVSLP by default on x86 with SLP_S0

2018-07-30 07:09:28 -07:00

ahci.h

Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2018-06-05 17:01:41 -07:00

ata_generic.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

ata_piix.c

ata_piix: constify pci_bits

2018-01-08 06:15:41 -08:00

Kconfig

Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2018-04-03 17:42:25 -07:00

libahci_platform.c

Revert "ata: ahci_platform: allow disabling of hotplug to save power"

2018-08-06 10:22:35 -07:00

libahci.c

ata: libahci: Allow reconfigure of DEVSLP register

2018-07-30 10:33:18 -07:00

libata-acpi.c

ACPI and power management updates for 3.15-rc1

2014-04-01 12:48:54 -07:00

libata-core.c

ata: ahci: Support state with min power but Partial low power state

2018-07-30 07:09:10 -07:00

libata-eh.c

Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2018-06-05 17:01:41 -07:00

libata-pmp.c

treewide: kzalloc() -> kcalloc()

2018-06-12 16:19:22 -07:00

libata-scsi.c

ata: ahci: Support state with min power but Partial low power state

2018-07-30 07:09:10 -07:00

libata-sff.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

libata-trace.c

libata: NCQ encapsulation for ZAC MANAGEMENT OUT

2016-05-09 12:36:46 -04:00

libata-transport.c

libata: add refcounting to ata_host

2018-03-13 13:29:10 -07:00

libata-transport.h

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02 11:10:55 +01:00

libata-zpodd.c

libata: zpodd: small read overflow in eject_tray()

2018-05-29 06:48:54 -07:00

libata.h

libata: add refcounting to ata_host

2018-03-13 13:29:10 -07:00

Makefile

Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2018-04-03 17:42:25 -07:00

pata_acpi.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ali.c

ata: Deprecate pci_get_bus_and_slot()

2018-01-11 17:23:23 -06:00

pata_amd.c

cs5536: add support for IDE controller variant

2017-08-11 10:35:07 -07:00

pata_arasan_cf.c

pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()

2018-02-18 05:16:35 -08:00

pata_artop.c

ata: pata_artop: remove redundant initialization of pio

2017-09-18 20:24:21 -07:00

pata_atiixp.c

libata:pata_atiixp: Don't use unconnected secondary port on SB600

2018-01-08 04:02:02 -08:00

pata_atp867x.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

pata_bk3710.c

pata_bk3710: clarify license version and use SPDX header

2018-03-01 13:59:03 -08:00

pata_cmd64x.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_cmd640.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_cs5520.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_cs5530.c

ata: Delete unnecessary checks before the function call "pci_dev_put"

2015-02-03 07:04:44 -05:00

pata_cs5535.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_cs5536.c

cs5536: add support for IDE controller variant

2017-08-11 10:35:07 -07:00

pata_cypress.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_efar.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ep93xx.c

ata: ep93xx: cut drvdata assignment

2017-05-30 11:54:36 -04:00

pata_falcon.c

pata_falcon: clarify license version and use SPDX header

2018-03-01 13:58:17 -08:00

pata_ftide010.c

ata: ftide010: fix resource printing

2017-06-21 18:06:18 -04:00

pata_gayle.c

ata: add Amiga Gayle PATA controller driver

2018-03-19 07:41:36 -07:00

pata_hpt3x2n.c

ata: delete non-required instances of include <linux/init.h>

2014-02-13 16:40:56 -05:00

pata_hpt3x3.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_hpt37x.c

ata: hpt37x: Convert to use match_string() helper

2018-05-07 08:50:30 -07:00

pata_hpt366.c

ata: hpt366: fix incorrect mask when checking at cmd_high_time

2016-07-12 11:02:05 -04:00

pata_icside.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_imx.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_isapnp.c

PNP: ata/pata_isapnp: Use module_pnp_driver to register driver

2015-03-18 22:39:17 +01:00

pata_it821x.c

pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()

2018-02-18 05:26:07 -08:00

pata_it8213.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ixp4xx_cf.c

ata: pass queued command to ->sff_data_xfer method

2017-01-10 11:11:17 -05:00

pata_jmicron.c

PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

2015-08-24 15:27:11 -05:00

pata_legacy.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_macio.c

pata_macio: Delete an error message for a failed memory allocation in two functions

2018-02-18 05:24:16 -08:00

pata_marvell.c

ata: Use IS_ENABLED() instead of checking for built-in or module

2016-05-27 11:27:23 -04:00

pata_mpc52xx.c

pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()

2018-02-18 05:23:25 -08:00

pata_mpiix.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_netcell.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ninja32.c

pata_ninja32: Avoid corrupting status flags

2016-08-30 11:59:47 -04:00

pata_ns87410.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ns87415.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_octeon_cf.c

pata_octeon_cf: use of_property_read_{bool|u32}()

2017-08-28 10:44:24 -07:00

pata_of_platform.c

ata: constify of_device_id structures

2017-03-06 15:18:01 -05:00

pata_oldpiix.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_opti.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_optidma.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_palmld.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_pcmcia.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_pdc202xx_old.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_pdc2027x.c

ata: pata_pdc2027x: Replace mdelay with msleep

2018-01-25 07:28:31 -08:00

pata_piccolo.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_platform.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pata_pxa.c

ata: pata_pxa: dmaengine conversion

2015-09-10 17:02:04 -04:00

pata_radisys.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_rb532_cf.c

ata: rb532_cf: cut drvdata assignment

2017-05-30 11:54:37 -04:00

pata_rdc.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

pata_rz1000.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_samsung_cf.c

pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()

2018-02-18 05:20:38 -08:00

pata_sc1200.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_sch.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

pata_serverworks.c

pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller

2014-10-07 17:10:14 -04:00

pata_sil680.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_sis.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_sl82c105.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_triflex.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_via.c

libata: remove ata_sff_data_xfer_noirq()

2018-07-11 10:45:28 -07:00

pdc_adma.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_dwc_460ex.c

libata: convert core and drivers to ->hw_tag usage

2018-05-11 13:10:43 -07:00

sata_fsl.c

sata_fsl: use the right type for tag bitshift

2018-05-14 08:14:21 -07:00

sata_gemini.c

ata: sata_gemini: Introduce explicit IDE pin control

2017-08-11 10:32:09 -07:00

sata_gemini.h

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02 11:10:55 +01:00

sata_highbank.c

libahci: Allow drivers to override stop_engine

2018-04-26 11:25:04 -07:00

sata_inic162x.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

sata_mv.c

treewide: devm_kzalloc() -> devm_kcalloc()

2018-06-12 16:19:22 -07:00

sata_nv.c

sata_nv: set host can_queue count appropriately

2018-05-11 13:10:43 -07:00

sata_promise.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_promise.h

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_qstor.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_rcar.c

ata: sata_rcar: exclude setting of PHY registers in Gen3

2018-08-06 10:25:34 -07:00

sata_sil24.c

Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2018-06-05 17:01:41 -07:00

sata_sil.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_sis.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_svw.c

ata: Convert to using %pOF instead of full_name

2017-07-18 18:02:36 -04:00

sata_sx4.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_uli.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_via.c

sata_via: Enable optional hotplug on VT6420

2017-06-26 16:54:53 -04:00

sata_vsc.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sis.h

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02 11:10:55 +01:00