iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a7ddcea58a
linux/drivers/scsi/fnic/vnic_devcmd.h
Hiral Patel d3c995f1dc [SCSI] fnic: FIP VLAN Discovery Feature Support 
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN.  Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release.  Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 07:30:40 -07:00

349 lines
11 KiB
C
Raw Blame History

/*
* Copyright 2008 Cisco Systems, Inc. All rights reserved.
* Copyright 2007 Nuova Systems, Inc. All rights reserved.
*
* This program is free software; you may redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _VNIC_DEVCMD_H_
#define _VNIC_DEVCMD_H_
#define _CMD_NBITS 14
#define _CMD_VTYPEBITS 10
#define _CMD_FLAGSBITS 6
#define _CMD_DIRBITS 2
#define _CMD_NMASK ((1 << _CMD_NBITS)-1)
#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1)
#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1)
#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1)
#define _CMD_NSHIFT 0
#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
/*
* Direction bits (from host perspective).
*/
#define _CMD_DIR_NONE 0U
#define _CMD_DIR_WRITE 1U
#define _CMD_DIR_READ 2U
#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ)
/*
* Flag bits.
*/
#define _CMD_FLAGS_NONE 0U
#define _CMD_FLAGS_NOWAIT 1U
/*
* vNIC type bits.
*/
#define _CMD_VTYPE_NONE 0U
#define _CMD_VTYPE_ENET 1U
#define _CMD_VTYPE_FC 2U
#define _CMD_VTYPE_SCSI 4U
#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
/*
* Used to create cmds..
*/
#define _CMDCF(dir, flags, vtype, nr) \
(((dir) << _CMD_DIRSHIFT) | \
((flags) << _CMD_FLAGSSHIFT) | \
((vtype) << _CMD_VTYPESHIFT) | \
((nr) << _CMD_NSHIFT))
#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr)
#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
/*
* Used to decode cmds..
*/
#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
enum vnic_devcmd_cmd {
CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
/* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */
CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
/* dev-specific block member:
* in: (u16)a0=offset,(u8)a1=size
* out: a0=value */
CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
/* stats clear */
CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
/* stats dump in mem: (u64)a0=paddr to stats area,
* (u16)a1=sizeof stats area */
CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
/* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
/* hang detection notification */
CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
/* MAC address in (u48)a0 */
CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ,
_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
/* disable/enable promisc mode: (u8)a0=0/1 */
/***** XXX DEPRECATED *****/
CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
/* disable/enable all-multi mode: (u8)a0=0/1 */
/***** XXX DEPRECATED *****/
CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
/* add addr from (u48)a0 */
CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
/* del addr from (u48)a0 */
CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE,
_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
/* add VLAN id in (u16)a0 */
CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
/* del VLAN id in (u16)a0 */
CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
/* nic_cfg in (u32)a0 */
CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
/* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
/* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
/* initiate softreset */
CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
/* softreset status:
* out: a0=0 reset complete, a0=1 reset in progress */
CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
/* set struct vnic_devcmd_notify buffer in mem:
* in:
* (u64)a0=paddr to notify (set paddr=0 to unset)
* (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
* (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
* out:
* (u32)a1 = effective size
*/
CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
/* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
* (u8)a1=PXENV_UNDI_xxx */
CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
/* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
/* open status:
* out: a0=0 open complete, a0=1 open in progress */
CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
/* close vnic */
CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
/* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
/* variant of CMD_INIT, with provisioning info
* (u64)a0=paddr of vnic_devcmd_provinfo
* (u32)a1=sizeof provision info */
CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
/* enable virtual link */
CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
/* disable virtual link */
CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
/* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
/* init status:
* out: a0=0 init complete, a0=1 init in progress
* if a0=0, a1=errno */
CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
/* INT13 API: (u64)a0=paddr to vnic_int13_params struct
* (u8)a1=INT13_CMD_xxx */
CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
/* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
/* undo initialize of virtual link */
CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
/* check fw capability of a cmd:
* in: (u32)a0=cmd
* out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
/* persistent binding info
* in: (u64)a0=paddr of arg
* (u32)a1=CMD_PERBI_XXX */
CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
/* Interrupt Assert Register functionality
* in: (u16)a0=interrupt number to assert
*/
CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
/* initiate hangreset, like softreset after hang detected */
CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
/* hangreset status:
* out: a0=0 reset complete, a0=1 reset in progress */
CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
/*
* Set hw ingress packet vlan rewrite mode:
* in: (u32)a0=new vlan rewrite mode
* out: (u32)a0=old vlan rewrite mode */
CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
/*
* in: (u16)a0=bdf of target vnic
* (u32)a1=cmd to proxy
* a2-a15=args to cmd in a1
* out: (u32)a0=status of proxied cmd
* a1-a15=out args of proxied cmd */
CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
/*
* As for BY_BDF except a0 is index of hvnlink subordinate vnic
* or SR-IOV virtual vnic
*/
CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
/*
* For HPP toggle:
* adapter-info-get
* in: (u64)a0=phsical address of buffer passed in from caller.
* (u16)a1=size of buffer specified in a0.
* out: (u64)a0=phsical address of buffer passed in from caller.
* (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
* 0 if no VIF-CONFIG-INFO TLV was ever received. */
CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
/*
* INT13 API: (u64)a0=paddr to vnic_int13_params struct
* (u32)a1=INT13_CMD_xxx
*/
CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45),
/*
* Set default vlan:
* in: (u16)a0=new default vlan
* (u16)a1=zero for overriding vlan with param a0,
* non-zero for resetting vlan to the default
* out: (u16)a0=old default vlan
*/
CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46)
};
/* flags for CMD_OPEN */
#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
/* flags for CMD_INIT */
#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */
/* flags for CMD_PACKET_FILTER */
#define CMD_PFILTER_DIRECTED 0x01
#define CMD_PFILTER_MULTICAST 0x02
#define CMD_PFILTER_BROADCAST 0x04
#define CMD_PFILTER_PROMISCUOUS 0x08
#define CMD_PFILTER_ALL_MULTICAST 0x10
enum vnic_devcmd_status {
STAT_NONE = 0,
STAT_BUSY = 1 << 0, /* cmd in progress */
STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */
};
enum vnic_devcmd_error {
ERR_SUCCESS = 0,
ERR_EINVAL = 1,
ERR_EFAULT = 2,
ERR_EPERM = 3,
ERR_EBUSY = 4,
ERR_ECMDUNKNOWN = 5,
ERR_EBADSTATE = 6,
ERR_ENOMEM = 7,
ERR_ETIMEDOUT = 8,
ERR_ELINKDOWN = 9,
};
struct vnic_devcmd_fw_info {
char fw_version[32];
char fw_build[32];
char hw_version[32];
char hw_serial_number[32];
};
struct vnic_devcmd_notify {
u32 csum; /* checksum over following words */
u32 link_state; /* link up == 1 */
u32 port_speed; /* effective port speed (rate limit) */
u32 mtu; /* MTU */
u32 msglvl; /* requested driver msg lvl */
u32 uif; /* uplink interface */
u32 status; /* status bits (see VNIC_STF_*) */
u32 error; /* error code (see ERR_*) for first ERR */
u32 link_down_cnt; /* running count of link down transitions */
};
#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */
struct vnic_devcmd_provinfo {
u8 oui[3];
u8 type;
u8 data[0];
};
/*
* Writing cmd register causes STAT_BUSY to get set in status register.
* When cmd completes, STAT_BUSY will be cleared.
*
* If cmd completed successfully STAT_ERROR will be clear
* and args registers contain cmd-specific results.
*
* If cmd error, STAT_ERROR will be set and args[0] contains error code.
*
* status register is read-only. While STAT_BUSY is set,
* all other register contents are read-only.
*/
/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
#define VNIC_DEVCMD_NARGS 15
struct vnic_devcmd {
u32 status; /* RO */
u32 cmd; /* RW */
u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
};
#endif /* _VNIC_DEVCMD_H_ */
Reference in New Issue View Git Blame Copy Permalink