Jacopo Mondi a8e7e88df9 iio: adc: Add Maxim MAX11100 driver ...

Add iio driver for Maxim MAX11100 single-channel ADC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2017-01-21 13:16:38 +00:00

..

accel

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

adc

iio: adc: Add Maxim MAX11100 driver

2017-01-21 13:16:38 +00:00

amplifiers

spi: Updates for v4.4

2015-11-05 13:15:12 -08:00

buffer

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

chemical

iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value

2016-10-23 22:18:27 +01:00

common

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

counter

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

dac

iio: dac: ad5593r: Add ACPI support

2016-12-30 17:20:14 +00:00

dummy

iio:dummy: Stop enabling timestamp by default.

2017-01-10 19:54:55 +00:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

health

First round of IIO new device support, features and cleanups for the 4.8 cycle.

2016-06-09 09:15:58 -07:00

humidity

iio: humidity: Support acpi probe for hts211

2016-12-03 08:56:28 +00:00

imu

iio: bmi160: use variable names for sizeof() operator

2017-01-21 13:06:03 +00:00

light

iio: light: cm3605: mark PM functions as __maybe_unused

2017-01-21 12:34:54 +00:00

magnetometer

iio: magnetometer: mag3110: claim direct mode during raw writes

2017-01-21 12:20:40 +00:00

orientation

iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)

2016-11-05 17:47:47 +00:00

potentiometer

iio: mcp4531: provide range of available raw values

2016-11-13 11:40:26 +00:00

potentiostat

iio: potentiostat: add LMP91000 support

2016-09-27 20:33:03 +01:00

pressure

iio: pressure: ms5611: claim direct mode during oversampling changes

2017-01-21 12:31:05 +00:00

proximity

iio: proximity: sx9500: claim direct mode during raw proximity reads

2017-01-21 12:21:53 +00:00

temperature

iio:temperature: Add support for TI TMP007 sensor

2017-01-14 10:45:05 +00:00

trigger

iio:trigger: Experimental kthread tight loop trigger (thread only)

2016-06-03 13:18:44 +01:00

iio_core_trigger.h

…

iio_core.h

iio:core: timestamping clock selection support

2016-06-30 19:41:38 +01:00

industrialio-buffer.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-event.c

iio: iio_push_event(): Don't crash if the event interface is not registered

2016-09-10 16:40:44 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio:trigger: Add helper function to verify that a trigger belongs to the same device

2016-09-27 20:32:55 +01:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: inkern: pass through raw values if no scaling

2017-01-14 12:20:18 +00:00

Kconfig

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

Makefile

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00