Joakim Zhang
ab07ff1c92
can: flexcan: flexcan_remove(): disable wakeup completely ...
With below sequence, we can see wakeup default is enabled after re-load module,
if it was enabled before, so we need disable wakeup in flexcan_remove().
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| disabled
| # echo enabled > /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled
| # rmmod flexcan
| # modprobe flexcan
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled
Fixes: de3578c198c6 ("can: flexcan: add self wakeup support")
Fixes: 915f9666421c ("can: flexcan: add support for DT property 'wakeup-source'")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com
[mkl: streamlined commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03 22:30:34 +01:00
2020-10-16 15:02:21 -07:00
2020-09-28 15:00:15 -07:00
2020-10-01 18:46:16 -07:00
2020-11-03 22:30:34 +01:00
2020-11-02 15:14:59 -08:00
2020-11-02 16:54:04 -08:00
2020-09-29 13:27:43 -07:00
2020-10-15 07:49:47 +02:00
2020-10-14 10:32:10 -07:00
2020-10-02 19:11:11 -07:00
2020-10-23 18:28:52 -07:00
2020-10-10 10:55:05 -07:00
2020-10-09 12:06:52 -07:00
2020-10-16 16:54:11 -07:00
2020-11-02 17:19:59 -08:00
2020-10-05 18:40:01 -07:00
2020-10-18 12:57:30 -07:00
2020-09-25 16:41:40 -07:00
2020-10-21 17:58:26 -07:00
2020-09-22 16:45:34 -07:00
2020-10-15 18:42:13 -07:00
2020-10-20 10:22:03 +02:00
2020-10-06 06:23:21 -07:00
2020-10-06 06:23:21 -07:00
2020-10-29 09:43:21 -07:00
2020-10-13 17:33:48 -07:00
2020-10-11 10:21:04 -07:00
2020-10-21 20:33:19 -07:00
2020-10-06 06:23:21 -07:00
ab07ff1c92